Oxorhenium(V) Complexes with 1,3,4‐Triphenyl‐1,2,4‐triazol‐5‐ylidene

Reactions of the oxorhenium(V) complexes [ReOX₃(PPh₃)₂] (X = Cl, Br) with the N‐heterocyclic carbene (NHC) 1,3,4‐triphenyl‐1,2,4‐triazol‐5‐ylidene (L^Ph) under mild conditions and in the presence of MeOH or water give [ReOX₂(Y)(PPh₃)(L^Ph)] complexes (X = Cl, Br; Y = OMe, OH). Attempted reactions of the carbene precursor 5‐methoxy‐1,3,4‐triphenyl‐4,5‐dihydro‐1H‐1,2,4‐triazole ( 1 ) with [ReOCl₃(PPh₃)₂] or [NBu₄][ReOCl₄] in boiling xylene resulted in protonation of the intermediately formed carbene and decomposition products such as [HL^Ph][ReOCl₄(OPPh₃)], [HL^Ph][ReOCl₄(OH₂)] or [HL^Ph][ReO₄] were isolated. The neutral [ReOX₂(Y)(PPh₃)(HL^Ph)] complexes are purple, airstable solids. The bulky NHC ligands coordinate monodentate and in cis‐position to PPh₃. The relatively long Re–C bond lengths of approximate 2.1Å indicate metal‐carbon single bonds.     

Nickel(II) N‐Benzyl‐N‐methyldithiocarbamato Complexes as Precursors for the Preparation of Graphite Oxidation Accelerators

The nickel(II) N‐benzyl‐N‐methyldithiocarbamato (BzMedtc) complexes [Ni(BzMedtc)(PPh₃)Cl] ( 1 ), [Ni(BzMedtc)(PPh₃)Br] ( 2 ), [Ni(BzMedtc)(PPh₃)I] ( 3 ), and [Ni(BzMedtc)(PPh₃)(NCS)] ( 4 ) were synthesized using the reaction of [Ni(BzMedtc)₂] and [NiX₂(PPh₃)₂] (X = Cl, Br, I and NCS). Subsequently, complex 1 was used for the preparation of [Ni(BzMedtc)(PPh₃)₂]ClO₄ ( 5 ), [Ni(BzMedtc)(PPh₃)₂]BPh₄ ( 6 ), and [Ni(BzMedtc)(PPh₃)₂]PF₆ ( 7 ). The obtained complexes 1 – 7 were characterized by elemental analysis, thermal analysis and spectroscopic methods (IR, UV/Vis, ³¹P{¹H} NMR). The results of the magnetochemical and molar conductivity measurements proved the complexes as diamagnetic non‐electrolytes ( 1 – 4 ) or 1:1 electrolytes ( 5 – 7 ). The molecular structures of 4 and 5· H₂O were determined by a single‐crystal X‐ray analysis. In all cases, the Ni^II atom is tetracoordinated in a distorted square‐planar arrangement with the S₂PX, and S₂P₂ donor set, respectively. The catalytic influence of selected complexes 1 , 3 , 5 , and 6 on graphite oxidation was studied. The results clearly indicated that the presence of the products of thermal degradation processes of the mentioned complexes has impact on the course of graphite oxidation. A decrease in the oxidation start temperatures by about 60–100 °C was observed in the cases of all the tested complexes in comparison with pure graphite.     

Phenylimidorhenium(V) Complexes with 1,3‐Diethyl‐4,5‐dimethylimidazole‐2‐ ylidene Ligands

The phenylimidorhenium(V) complexes [Re(NPh)X₃(PPh₃)₂] (X = Cl, Br) react with the N‐heterocyclic carbene (NHC) 1,3‐diethyl‐4,5‐dimethylimidazole‐2‐ylidene (L^Et) under formation of the stable rhenium(V) complex cations [Re(NPh)X(L^Et)₄]²⁺ (X = Cl, Br), which can be isolated as their chloride or [PF₆]^? salts. The compounds are remarkably stable against air, moisture and ligand exchange. The hydroxo species [Re(NPh)(OH)(L^Et)₄]²⁺ is formed when moist solvents are used during the synthesis. The rhenium atoms in all three complexes are coordinated in a distorted octahedral fashion with the four NHC ligands in equatorial planes of the molecules. The Re–C(carbene) bond lengths between 2.171(8) and 2.221(3) Å indicate mainly σ‐bonding between the NHC ligand and the electron deficient d² metal atoms. Attempts to prepare analogous phenylimido complexes from [Re(NPh)Cl₃(PPh₃)₂] and 1,3‐diisopropyl‐4,5‐dimethylimidazole‐2‐ylidene (L^i?Pr) led to a cleavage of the rhenium‐nitrogen multiple bond and the formation of the dioxo complex [ReO₂(L^i?Pr)₄]⁺.     

Pyrrole‐2‐carbaldehyde Thiosemicarbazonates of Nickel(II) and Palladium(II): Synthesis,Structure, and Spectroscopy

Complexes of pyrrole‐2‐carbaldehyde thiosemicarbazones, [(C₄H₄N⁴)(H)C²=N³–N²(H)–C¹(=S)–N¹HR; R = Ph, H₂L¹; Me, H₂L²; H, H₂L³] with nickel(II) and palladium(II) are described. The reaction of nickel(II) acetate with H₂L¹ in methanol in 1:1 molar ratio yielded a complex of composition, [Ni(κ²‐N³,S‐HL¹)₂] ( 1 ). Likewise reaction of NiCl₂ with H₂L² in 1:1 molar ratio in acetonitrile in the presence of triethylamine base followed by the addition of pyridine did not yield the anticipated [Ni(κ³‐N⁴,N³,S‐L²)(py)] complex, moreover a bis‐square‐planar complex, [Ni(κ²‐N³,S‐HL²)₂] ( 2 ) was formed. However, in the presence of bipyridine (bipy), it yielded the addition product, [Ni(κ²‐N³,S‐HL²)₂(κ²‐N, N‐bipy)] ( 3 ). Reaction of PdCl₂(κ²‐P, P–PPh₂–CH₂–PPh₂) with H₂L³ in toluene in the presence of triethylamine has yielded a complex of stoichiometry, [Pd(κ³‐N⁴,N³,S–L³)(κ¹‐P–PPh₂–CH₂–P(O)Ph₂] ( 4 ). The ligands (HL¹)^– and (HL²)^– are chelating to Ni^II metal atom as anions binding through N³,S‐donor atoms with pendant pyrrole groups, and (L³)^2– is chelating to the Pd^II metal atom as dianion through N⁴,N³,S‐donor atoms (pyrrole is N⁴‐bonded). Fourth site in 4 is bonded to one P‐donor atom of PPh₂–CH₂–P(O)Ph₂, whose pendant –PPh₂ group involves auto oxidation to –P(O)PPh₂ during reaction. These complexes were characterized using analytical data, IR, NMR (¹H, ³¹P) spectroscopy and X‐ray crystallography. Complexes 1 , 2 , and 4 have square‐planar arrangement, whereas complex 3 is octahedral.     

Copper(II) and Cadmium(II) Complexes Based on N,N‐Bis(3, 5‐dimethyl‐2‐hydroxybenzyl)‐N‐(2‐pyridylmethyl)amine Ligand: Syntheses,Structures, Magnetic,and Luminescent Properties

The reaction of the aryl‐oxide ligand H₂L [H₂L = N,N‐bis(3, 5‐dimethyl‐2‐hydroxybenzyl)‐N‐(2‐pyridylmethyl)amine] with CuSO₄ · 5H₂O, CuCl₂ · 2H₂O, CuBr₂, CdCl₂ · 2.5H₂O, and Cd(OAc)₂ · 2H₂O, respectively, under hydrothermal conditions gave the complexes [Cu(H₂L¹)₂] · SO₄ · 3CH₃OH ( 1 ), [Cu₂(H₂L²)₂Cl₄] ( 2 ), [Cu₂(H₂L²)₂Br₄] ( 3 ), [Cd₂(HL)₂Cl₂] ( 4 ), and [Cd₂(L)₂(CH₃COOH)₂] · H₂L ( 5 ), where H₂L¹ [H₂L¹ = 2, 4‐dimethyl‐6‐((pyridin‐2‐ylmethylamino)methyl)phenol] and H₂L² [H₂L² = 2‐(2, 4‐dimethyl‐6‐((pyridin‐2‐ylmethylamino)methyl)phenoxy)‐4, 6‐dimethylphenol] were derived from the solvothermal in situ metal/ligand reactions. These complexes were characterized by IR spectroscopy, elementary analysis, and X‐ray diffraction. A low‐temperature magnetic susceptibility measurement for the solid sample of 2 revealed antiferromagnetic interactions between two central copper(II) atoms. The emission property studies for complexes 4 and 5 indicated strong luminescence emission.     

Synthesis and Reactivity of Structurally Analogous Phenylimido and Oxo Complexes of Rhenium(V) with N,N‐Dialkyl‐N′‐benzoylthioureas

[ReOCl₃(PPh₃)₂] and [Re(NPh)Br₃(PPh₃)₂] react at room temperature with equivalent amounts of N,N‐dialkyl‐N′‐benzoylthioureas (HR¹R²btu) in CH₂Cl₂ under formation of the rhenium(V) complexes [ReOCl₂(R¹R¹btu)(PPh₃)] and [Re(NPh)Br₂(R¹R²btu)(PPh₃)], respectively. The products are structurally analogous with the oxygen atoms of the benzoylthioureas binding in trans positions to the oxo or phenylimido ligands. Prolonged reaction times result in the reduction of the oxo compound by the released PPh₃ and the formation of rhenium(III) complexes of the composition [ReCl₂(PPh₃)₂(R¹R²btu)], while such a second reaction path is excluded for the phenylimido compound. Phenylimido species with more than one N,N‐dialkyl‐N′‐benzoylthioureato ligand could not be isolated, even when a large excess of HR¹R²btu was used during the reaction.     

Metallkomplexe mit N2O2S2‐Koordinationssphäre. Synthese und Charakterisierung der Cobalt(II)‐, Nickel(II)‐ und Kupfer(II)‐Komplexe eines 15‐ und eines 16‐gliedrigen N,N′‐bis(2‐hydroxyethyl)‐funktionalisierten makrocyclischen Liganden

Metal Complexes with N₂O₂S₂ Donor Set. Synthesis and Characterization of the Cobalt(II), Nickel(II), and Copper(II) Complexes of a 15‐ and a 16‐Membered Bis(2‐hydroxyethyl) Pendant Macrocyclic Ligand The macrocyclic ligands 6, 10‐bis(2‐hydroxyethyl)‐7, 8, 9, 11, 17, 18‐hexahydro‐dibenzo‐[e, n][1, 4, 8, 12]‐dithiadiaza‐cyclopentadecine ( 1 ) (L¹) and 5, 13‐bis(2‐hydroxyethyl)‐7, 8, 9, 10, 16, 17, 18, 19, 20‐nonahydro‐dibenzo‐[g, o][1, 9, 5, 13]‐dithiadiaza‐cyclohexadecine (L⁴) have been prepared. They form the stable complexes [CoL¹(‐H)CoL¹](ClO₄)₃ ( 2 ), [NiL¹](ClO₄)₂·MeOH ( 3 ), Λ‐[CuL¹](ClO₄)₂·MeOH ( 4a ) and rac‐[CuL¹](ClO₄)₂·MeOH ( 4b ), [NiL⁴](ClO₄)₂ ( 5 ), and [CuL⁴](ClO₄)₂ ( 6 ). The compounds 1 to 6 have been characterized by standard methods and single‐crystal X‐ray diffraction. In the complexes 2 to 6 the metal atoms are octahedrally coordinated by the N₂O₂S₂ donor set of the ligands. L¹ and L⁴ are folded herein along the N···M···S‐ and the N···M···N′‐axes, respectively. This results at the metal atom in a all‐cis‐configuration for the complexes of L¹ and a trans‐N₂‐cis‐O₂‐cis‐S₂‐configuration for the complexes of L⁴. The cobalt(II) complex 2 is a dimer, bridged by a rather short hydrogen bridge of 2.402(12)Å length. The copper(II) complexes of L¹ and L⁴ differ with respect to the Jahn‐Teller‐distortion.     

Heterobimetallische Komplexe von Lithium,Aluminium und Gold mit dem N‐[2‐N′,N′‐(Dimethylaminoethyl)‐N‐methyl‐aminoethyl]‐ferrocenyl‐Liganden (η5‐C5H5)Fe{η5‐C5H3[CH(CH3)N(CH3)CH2CH2NMe2]‐2}

Heterobimetallic Complexes of Lithium, Aluminum, and Gold with the N ‐[2‐ N ′, N ′‐(dimethylaminoethyl)‐ N ‐methyl‐aminoethyl]‐ferrocenyl Ligand (η⁵‐C₅H₅)Fe{η⁵‐C₅H₃[CH(CH₃)N(CH₃)CH₂CH₂NMe₂]‐2} N‐[2‐N′,N′‐(dimethylaminoethyl)‐N‐methyl‐aminoethyl]ferrocene FcN,NH ( 1 ) reacts with ⁿBuLi under formation of the lithium organyl (FcN,N)Li ( 2 ). At reactions of 2 with AlBr₃ and AuCl · PPh₃ the heterobimetallic organo derivatives (FcN,N)AlBr₂ ( 3 ), (FcN,N)Au · PPh₃ ( 4 ) are formed. A detailed characterization of 2 – 4 was carried out by single crystal x‐ray analyses as well as by NMR and Mößbauer spectroscopy.     

N,N, N′, N′‐Tetrakis(diphenylphosphanyl)‐1, 3‐diaminobenzene as a Bis‐chelate Ligand in [1, 3‐{cis‐Mo(CO)4(PPh2)2N}2C6H4]

1, 3‐Diaminobenzene reacts readily with PPh₂Cl to give N, N, N′, N′‐tetrakis(diphenylphosphanyl)‐1, 3‐diaminobenzene ( 1 ) in excellent yield. The dinuclear complex [1, 3‐{cis‐Mo(CO)₄(PPh₂)₂N}₂C₆H₄] ( 2 ) is obtained in high yield from 1 and cis‐[Mo(CO)₄(NCEt)₂]. Compounds 1 and 2 were characterized by NMR spectroscopy (¹H, ¹³C, ³¹P) and by crystal structure determination. The latter shows the formation of a bis‐chelate complex with Mo‐P‐N‐P four‐membered rings.     

1, 9‐Dihydro‐purine‐6‐thione Derivatives of the d8–d10 Metal Ions (PdII,PtII, and CuI): Synthesis,Spectroscopy, and Structures

Reaction of 1, 9‐dihydro‐purine‐6‐thione (puSH₂) in presence of aqueous sodium hydroxide with PdCl₂(PPh₃)₂ suspended in ethanol formed [Pd(κ²‐N⁷,S‐puS)(PPh₃)₂] ( 1 ). Similarly, complexes [Pd(κ²‐N⁷,S‐puS)(κ²‐P, P‐L‐L)] ( 2 – 4 ) {L‐L = dppm (m = 1) ( 2 ), dppp (m = 3) ( 3 ), dppb (m = 4) ( 4 )} were prepared using precursors the [PdCl₂(L‐L)] {L‐L = Ph₂P–(CH₂)_m–PPh₂}. Reaction of puSH₂ suspended in benzene with platinic acid, H₂PtCl₆, in ethanol in the presence of triethylamine followed by the addition of PPh₃ yielded the complex [Pt(κ²‐N⁷,S‐puS)(PPh₃)₂] ( 5 ). Complexes [Pt(κ²‐N⁷,S‐puS)(κ²‐P, P‐L‐L)] ( 6 – 8 ) {L‐L = dppm ( 6 ), dppp ( 7 ), dppb ( 8 )} were prepared similarly. The 1, 9‐dihydro‐purine‐6‐thione acts as N⁷,S‐chelating dianion in compounds 1 – 8 . The reaction of copper(I) chloride [or copper(I) bromide] in acetonitrile with puSH₂ and the addition of PPh₃ in methanol yielded the same product, [Cu(κ²‐N⁷,S‐puSH)(PPh₃)₂] ( 9 ), in which the halogen atoms are removed by uninegative N, S‐chelating puSH^– anion. However, copper(I) iodide did not lose iodide and formed the tetrahedral complex, [CuI(κ¹‐S‐puSH₂)(PPh₃)₂] ( 10 ), in which the thio ligand is neutral. These complexes were characterized with the help of elemental analysis, NMR spectroscopy (¹H, ³¹P), and single‐crystal X‐ray crystallography ( 3 , 7 , 8 , 9 , and 10 ).     

Reactivity Studies of η5‐ Indenyl and η5‐Cp* Ruthenium(II) Complexes towards some Polypyridyl Ligands

The reaction of [(η⁵‐L³)Ru(PPh₃)₂Cl], where; L³ = C₉H₇ ( 1 ), C₅Me₅ (Cp*) ( 2 ) with acetonitrile in the presence of [NH₄][PF₆] yielded cationic complexes [(η⁵‐L³)Ru(PPh₃)₂(CH₃CN)][PF₆]; L³= C₉H₇ ([3]PF₆) and L³ = C₅Me₅ ([4]PF₆), respectively. Complexes [3]PF₆ and [4]PF₆ reacts with some polypyridyl ligands viz, 2,3‐bis (α‐pyridyl) pyrazine (bpp), 2,3‐bis (α‐pyridyl) quinoxaline (bpq) yielding the complexes of the formulation [(η⁵‐L³)Ru(PPh₃)(L²)]PF₆ where; L³ = C₉H₇, L² = bpp, ([5]PF₆), L³ = C₉H₇, L² = bpq, ([6]PF₆); L³ = C₅Me₅, L² = bpp, ([7]PF₆) and bpq, ([8]PF₆), respectively. However reaction of [(η⁵‐C₉H₇)Ru(PPh₃)₂(CH₃CN)][PF₆] ([3]PF₆) with the sterically demanding polypyridyl ligands, viz. 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine (tptz) or tetra‐2‐pyridyl‐1,4‐pyrazine (tppz) leads to the formation of unexpected complexes [Ru(PPh₃)₂(L²)(CH₃CN)][PF₆]₂; L² = tppz ([9](PF₆)₂), tptz ([11](PF₆)₂) and [Ru(PPh₃)₂(L²)Cl][PF₆]; L² = tppz ([10]PF₆), tptz ([12]PF₆). The complexes were isolated as their hexafluorophosphate salts. They have been characterized on the basis of micro analytical and spectroscopic data. The crystal structures of the representative complexes were established by X‐ray crystallography.     

Nitridorhenium(V) Complexes with 1,3,4‐Triphenyl‐1,2,4‐triazol‐5‐ylidene

[ReNCl₂(PPh₃)₂] and [ReNCl₂(PMe₂Ph)₃] react with the N‐heterocyclic carbene (NHC) 1,3,4‐triphenyl‐1,2,4‐triazol‐5‐ylidene (HL^Ph) under formation of the stable rhenium(V) nitrido complex [ReNCl(HL^Ph)(L^Ph)], which contains one of the two NHC ligands with an additional orthometallation. The rhenium atom in the product is five‐coordinate with a distorted square‐pyramidal coordination sphere. The position trans to the nitrido ligand is blocked by one phenyl ring of the monodentate HL^Ph ligand. The Re–C(carbene) bond lengths of 2.072(6) and 2.074(6) Å are comparably long and indicate mainly σ‐bonding between the NHC ligand and the electron deficient d² metal atom. The chloro ligand in [ReNCl(HL^Ph)(L^Ph)] is labile and can be replaced by ligands such as pseudohalides or monoanionic thiolates such as diphenyldithiophosphinate (Ph₂PS₂^?) or pyridine‐2‐thiolate (pyS^?). X‐ray structure analyses of [ReN(CN)(HL^Ph)(L^Ph)] and [ReN(pyS)(HL^Ph)(L^Ph)] show that the bonding situation of the NHC ligands (Re–C(carbene) distances between 2.086(3) and 2.130(3) Å) in the product is not significantly influenced by the ligand exchange. The potentially bidentate pyS^? ligand is solely coordinated via its thiolato functionality. Hydrogen atoms of each one of the phenyl rings come close to the unoccupied sixth coordination positions of the rhenium atoms in the solid state structures of all complexes. Re–H distances between 2.620 and 2.712Å do not allow to discuss bonding, but with respect to the strong trans labilising influence of “N^3?”, weak interactions are indicated.     

Synthesis,Spectroscopy, and Structures of Mono‐ and Dinuclear Copper(I) Halide Complexes with 1,3‐Imidazolidine‐2‐thiones

Copper(I) halides with triphenyl phosphine and imidaozlidine‐2‐thiones (L ‐NMe, L ‐NEt, and L ‐NPh) in acetonitrile/methanol (or dichloromethane) yielded copper(I) mixed‐ligand complexes: mononuclear, namely, [CuCl(κ¹‐S‐L ‐NMe)(PPh₃)₂] ( 1 ), [CuBr(κ¹‐S‐L ‐NMe)(PPh₃)₂] ( 2 ), [CuBr(κ¹‐S‐L ‐NEt)(PPh₃)₂] ( 5 ), [CuI(κ¹‐S‐L ‐NEt)(PPh₃)₂] ( 6 ), [CuCl(κ¹‐S‐L ‐NPh)(PPh₃)₂] ( 7 ), and [CuBr(κ¹‐S‐L ‐NPh)(PPh₃)₂] ( 8 ), and dinuclear, [Cu₂(κ¹‐I)₂(μ‐S‐L ‐NMe)₂(PPh₃)₂] ( 3 ) and [Cu₂(μ‐Cl)₂(κ¹‐S‐L ‐NEt)₂(PPh₃)₂] ( 4 ). All complexes were characterized with analytical data, IR and NMR spectroscopy, and X‐ray crystallography. Complexes 2 – 4 , 7 , and 8 each formed crystals in the triclinic system with P$\bar{1}$ space group, whereas complexes 1 , 5 , and 6 crystallized in the monoclinic crystal system with space groups P2₁/c, C2/c, and P2₁/n, respectively. Complex 2 has shown two independent molecules, [(CuBr(κ¹‐S‐L ‐NMe)(PPh₃)₂] and [CuBr(PPh₃)₂] in the unit cell. For X = Cl, the thio‐ligand bonded to metal as terminal in complex 4 , whereas for X = I it is sulfur‐bridged in complex 3 .     

The Influence of Substituents at C2 Carbon Atom of Thiosemicarbazones {R(H)C2=N3‐N2(H)‐C1(=S)‐N1H2} on their Dentacy in PtII/PdII Complexes: Synthesis,Spectroscopy, and Crystal Structures

The coordination chemistry of platinum(II) with a series of thiosemicarbazones {R(H)C²=N³‐N²(H)‐C¹(=S)‐N¹H₂, R = 2‐hydroxyphenyl, H₂stsc; pyrrole, H₂ptsc; phenyl, Hbtsc} is described. Reactions of trans‐PtCl₂(PPh₃)₂ precursor with H₂stsc (or H₂ptsc) in 1 : 1 molar ratio in the presence of Et₃N base yielded complexes, [Pt(η³‐ O, N³, S‐stsc)(PPh₃)] ( 1 ) and [Pt(η³‐ N⁴, N³, S‐ptsc)(PPh₃)] ( 2 ), respectively. Further, trans‐PtCl₂(PPh₃)₂ and Hbtsc in 1 : 2 (M : L) molar ratio yielded a different compound, [Pt(η²‐ N³, S‐btsc)(η¹‐S‐btsc)(PPh₃)] ( 3 ). Complex 1 involved deprotonation of hydrazinic (‐N²H‐) and hydroxyl (‐OH) groups, and stsc^2? is coordinating via O, N³, S donor atoms, while complex 2 involved deprotonation of hydrazinic (‐N²H‐) and ‐N⁴H groups and ptsc^2? is probably coordinating via N⁴, N³, S donor atoms. Reaction of PdCl₂(PPh₃)₂ with Hbtsc‐Me {C₆H₅(CH₃)C²=N³‐N²(H)‐C¹(=S)‐N¹H₂} yielded a cyclometallated complex [Pd(η³‐C, N³, S‐btsc‐Me)(PPh₃)] ( 4 ). These complexes have been characterized with the help of analytical data, spectroscopic techniques {IR, NMR (¹H, ³¹P), U.V} and single crystal X‐ray crystallography ( 1 , 3 and 4 ). The effects of substituents at C² carbon of thiosemicarbazones on their dentacy and cyclometallation are emphasized.     

Binuclear and chain‐structure zinc(II) complexes constructed from 3,4‐dimethoxy‐trans‐cinnamic acid and N‐donor coligands 4‐(1H‐pyrazol‐3‐yl)pyridine and 4,4′‐bipyridine

3,4‐Dimethoxy‐trans‐cinnamic acid (Dmca) reacts with zinc sulfate in the presence of 4‐(1H‐pyrazol‐3‐yl)pyridine (L₁) or 4,4′‐bipyridine (L₂) under hydrothermal conditions to afford two mixed‐ligand coordination complexes, namely tetrakis(μ‐3,4‐dimethoxy‐trans‐cinnamato‐κ²O:O′)bis[[4‐(1H‐pyrazol‐3‐yl)pyridine]zinc(II)] heptahydrate, [Zn₂(C₁₁H₁₁O₄)₄(C₈H₇N₃)₂]·7H₂O or [Zn₂(Dmca)₄(L₁)₂]·7H₂O, (I), and catena‐poly[[bis(3,4‐dimethoxy‐trans‐cinnamato‐κO)zinc(II)]‐μ‐4,4′‐bipyridine‐κ²N:N′], [Zn(C₁₁H₁₁O₄)₂(C₁₀H₈N₂)]_n or [Zn(Dmca)₂(L₂)]_n, (II). The Zn^II centres in the two compounds display different coordination polyhedra. In complex (I), the Zn^II cation is five‐coordinated with a pseudo‐square‐pyramidal geometry, while in complex (II) the Zn^II cation sits on a twofold axis and adopts a distorted tetrahedral coordination environment. Complex (I) features a centrosymmetric binuclear paddle‐wheel‐like structure, while complex (II) shows a chain structure. This study emphasizes the significant effect of the coordination mode of both carboxylate‐group and N‐donor coligands on the formation of complex structures.     

Complexes of N‐Thiophosphorylthiourea α‐NaphthylNHC(S)NHP(S)(OiPr)2 (HL) with Copper(I). Crystal Structures of HL and Cu(PPh3)2L

Reaction of the potassium salt of N‐thiophosphorylated thiourea α‐naphthylNHC(S)NHP(S)(OiPr)₂ ( HL ) with Cu(PPh₃)₃I in aqueous EtOH/CH₂Cl₂ leads to the mononuclear complex [Cu(PPh₃)₂L–S,S′]. By using copper(I) iodide instead ofCu(PPh₃)₃I, the polynuclear complex [Cu_n(L–S,S′)_n] was obtained. The structures of these compounds were investigated by elemental analysis, ¹H and ³¹P{¹H} NMR and IR spectroscopy. The crystal structures of HL and Cu(PPh₃)₂L were determined by single‐crystal X‐ray diffraction.     

Thiosemicarbazonates of Ruthenium(II): Crystal Structures of [Bis(triphenylphosphine)][bis(N‐phenyl‐pyridine‐2‐carbaldehyde Thiosemicarbazonato)]ruthenium(II) and [Bis(diphenylphosphino)butane][bis(salicylaldehyde Thiosemicarbazonato)]ruthenium(II)

Reaction of RuCl₂(PPh₃)₃ with N‐Phenyl‐pyridine‐2‐carbaldehyde thiosemicarbazone (C₅H₄N–C²(H)=N³‐N²H–C¹(=S)N¹HC₆H₅, Hpytsc‐NPh) in presence of Et₃N base led to loss of ‐N²H‐proton and yielded the complex [Ru(pytsc‐NPh)₂(Ph₃P)₂] ( 1 ). Similar reactions of precursor RuCl₂[(p‐tolyl)₃P]₃ with a series of thiosemicarbazone ligands, viz. pyridine‐2‐carbaldehyde thiosemicarbazone (Hpytsc), salicylaldehyde thiosemicarbazone (H₂stsc), and benzaldehyde thiosemicarbazone (Hbtsc), have yielded the complexes, [Ru(pytsc)₂{(p‐tolyl)₃P}₂] ( 2 ), [Ru(Hstsc)₂{(p‐tolyl)₃P}]₂ ( 3 ), and [Ru(btsc)₂{(p‐tolyl)₃P}₂] ( 4 ), respectively. The reactions of precursor Ru₂Cl₄(dppb)₃ {dppb = Ph₂P–(CH₂)₄–PPh₂} with H₂stsc, Hbtsc, furan‐2‐carbaldehyde thiosemicarbazone (Hftsc) and thiophene‐2‐carbaldehyde thiosemicarbazone (Httsc) have formed complexes of the composition, [Ru(Hstsc)₂(dppb)] ( 5 ), [Ru(btsc)₂(dppb)] ( 6 ), [Ru(ftsc)₂(dppb)] ( 7 ), and [Ru(ttsc)₂(dppb)] ( 8 ). The complexes have been characterized by analytical data, IR, NMR (¹H, ³¹P) spectroscopy and X‐ray crystallography ( 1 and 5 ). The proton NMR confirmed loss of –N²H– proton in all the compounds, and ³¹P NMR spectra reveal the presence of equivalent phosphorus atoms in the complexes. In all the compounds, thiosemicarbazone ligands coordinate to the Ru^II atom via hydrazinic nitrogen (N²) and sulfur atoms. The arrangement around each metal atom is distorted octahedral with cis:cis:trans P, P:N, N:S, S dispositions of donor atoms.     

Synthesis of 2‐(N‐arylimino)pyrrolide nickel complexes and polymerization of methyl methacrylate

The synthesis, characterization and methyl methacrylate polymerization behaviors of 2‐(N‐arylimino)pyrrolide nickel complexes are described. The nickel complex [NN]₂Ni ( 1 , [NN] = [2‐C(H)NAr‐5‐tBu‐C₄H₂N]^?, Ar = 2,6‐iPr₂C₆H₃) was prepared in good yield by the reaction of [NN]Li with trans‐[Ni(Cl)(Ph)(PPh₃)₂] in THF. Reaction of [NN]Li with NiBr₂(DME) yielded the nickel bromide [NN]Ni(Br)[NNH] ( 2 ). Complexes 1 and 2 were characterized by ¹H NMR and IR spectroscopy and elemental analysis, and by X‐ray single crystal analysis. Both complexes, upon activation with methylaluminoxane, are highly active for the polymerization of methyl methacrylate to give high molecular weight polymethylmethacrylate with narrow molecular distributions. Copyright © 2009 John Wiley & Sons, Ltd.     

N‐Benzoyl‐N′,N′‐dibutylselenourea and its palladium(II) complex

The crystal and molecular structures of N‐benzoyl‐N′,N′‐dibutylselenourea (HL), C₁₆H₂₄N₂OSe, and the corresponding complex bis(N‐benzoyl‐N′,N′‐dibutylselenoureato‐κ²Se,O)palladium(II), [Pd(C₁₆H₂₃N₂OSe)₂], are reported. The selenourea molecule is characterized by intermolecular hydrogen bonds between the selenoamidic H atom and the Se atom of a neighbouring molecule forming a dimer, presumably as a consequence of resonance‐assisted hydrogen bonding or π‐bonding co‐operativity. A second dimeric hydrogen bond is also described. In the palladium complex, the typical square‐planar coordination characteristic of such ligands results in a cis‐[Pd(L‐Se,O)₂] complex.     

Nitridorhenium(V) Complexes with 1,3‐Dialkyl‐4,5‐dimethylimidazole‐2‐ylidenes

The nitridorhenium(V) complexes [ReNCl₂(PR₂Ph)₃] (R = Me, Et) react with the N‐heterocyclic carbenes (NHC) 1,3‐diethyl‐4,5‐dimethylimidazole‐5‐ylidene (L^Et) or 1,3,4,5‐tetramethylimidazole‐2‐ylidene (L^Me) in absolutely dry THF under complete replacement of the equatorial coordination sphere. The resulting [ReNCl(L^R)₄]⁺ complexes (L^R = L^Me, L^Et) are moderately stable as solids and in solution, but decompose in hot methanol under formation of [ReO₂(L^R)₄]⁺ complexes. With 1,3‐diisopropyl‐4,5‐dimethylimidazole‐5‐ylidene (L^i‐Pr), the loss of the nitrido ligand and the formation of a dioxo species is more rapid and no nitridorhenium intermediate could be isolated. The Re‐C bond lengths in [ReNCl(L^Et)₄]Cl of approximately 2.195Å are relatively long and indicate mainly σ‐bonding in the electron‐deficient d² system under study. The hydrolysis of the nitrido complexes proceeds via the formation of [ReO₃N]^2? anions as could be verified by the isolation and structural characterization of the intermediates [{ReN(PMe₂Ph)₃}{ReO₃N}]₂ and [{ReN(OH₂)(L^Et)₂}₂O][ReO₃N].