Functional 1,3‐benzoxazine bearing 4‐pyridyl group: Synthesis and thermally induced polymerization behavior

1,3‐benzoxazine 1 , bearing 4‐pyridyl moiety on the nitrogen atom, was synthesized from p‐cresol, 4‐aminopyridine, and paraformaldehyde. The efficient synthesis was achieved by adding acetic acid to suppress the strong basicity caused by the presence of 4‐aminopyridine derivatives. Upon heating 1 at 180 °C, it underwent the thermally induced ring‐opening polymerization. The resulting polymer was composed of two types of repeating unit, i.e., (1) Mannich‐type one (‐phenol‐CH₂‐NR‐CH₂‐) that can be expected from the general ring‐opening polymerization of conventional benzoxazines and (2) a typical phenolic resin‐type one (‐phenol‐CH₂‐phenol‐) induced by release of 4‐aminopyridine and paraformaldehyde (unit B). Another structural feature of the polymer was that it possessed a benzoxazine moiety at the chain end. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 410–416     

Synthesis and crosslinking reaction of a novel polymer containing benzoxazine and phenyleneethynylene moieties in the main chain

A novel polymer, poly( 1 ) containing benzoxazine and phenyleneethynylene moieties in the main chain with number‐average molecular weights ranging from 1400 to 9800 was obtained quantitatively by the Sonogashira–Hagihara coupling polymerization of the corresponding iodophenyl‐ and ethynylphenyl‐substituted monomer 1 . Poly( 1 ) was heated at 200 °C under N₂ for 2 h to obtain the cured polymer, poly( 1 )′ via the ring‐opening polymerization of the benzoxazine moieties. The structures of the polymer before and after curing were confirmed by ¹H‐NMR, IR, and UV–vis absorption and reflectance spectroscopies. Poly( 1 )′ was thermally more stable than monomer 1 and poly( 1 ). A specimen was prepared from a mixture of poly( 1 ) and phenol‐diaminodiphenylmethane type benzoxazine 2 by heating at 200 °C for 2 h under N₂. The poly( 1 )/ 2 resin was thermally stable than bisphenol‐A type benzoxazine resin 3 . Poly( 1 ) exhibited XRD peaks corresponding to the d‐spacings of 1.26–0.98 and 0.40 nm, assignable to the repeating monomer unit and alignment of polymer molecules, respectively. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 2581–2589     

Synthesis and crosslinking behavior of a novel linear polymer bearing 1,2,3‐triazol and benzoxazine groups in the main chain by a step‐growth click‐coupling reaction

The click‐coupling reaction was applied to polycondensation, to synthesize a high‐molecular weight prepolymer having benzoxazine moieties in the main chain. For the polycondensation, a bifunctional N‐propargyl benzoxazine was synthesized from bisphenol A, propargylamine, and formaldehyde. The propargyl group was efficiently used for the copper(I)‐catalyzed alkyne‐azide “click” reaction with p‐xylene‐α,α′‐diazide, to give the corresponding linear polycondensate having 1,2,3‐triazole junctions. The polycondensation proceeded in N,N‐dimethylformamide (DMF) at room temperature. By this highly efficient “click‐” polycondensation reaction, the benzoxazine ring in the monomer was successfully introduced into the polymer main chain without any side reaction. The obtained polymer (=prepolymer) underwent thermal crosslinking to afford the corresponding product, which was insoluble in a wide range of organic solvents and exhibited higher thermal stability than the polymer before crosslinking. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2316–2325, 2008     

Construction of reversible hydration–dehydration system by a model compound and a novel polymer bearing vicinal tricarbonyl structure

A novel polymer bearing acyclic vicinal tricarbonyl moieties in the side chains was synthesized by (1) radical polymerization of a styrene derivative with a 1,3‐diketone structure and (2) successive treatment of the resulting polystyrene derivative by N‐bromosuccinimide to convert its 1,3‐diketone moiety in the side chains into the corresponding vicinal tricarbonyl moiety. The tricarbonyl moiety was highly reactive with water to permit its rapid conversion into a geminal diol structure in water‐containing acetone. On the other hand, heating the resulting polymer bearing the geminal diol structure under vacuum enabled successful recovery of the vicinal tricarbonyl moiety to demonstrate the reversible nature of this system, which allowed us to repeat the hydration–dehydration cycle without deteriorating the polymer structure. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Modulating light‐tunable acid sensitivity of a bioinspired polymer simply by adjusting the position of a single methoxy substituent

This article describes a rhodopsin‐inspired photosensitive polymer whose light‐tunable acid sensitivity can be widely modulated simply by adjusting the position of a single methoxy substituent in the aromatic rings of cinnamyl groups. The well‐defined poly(5‐ethyl‐5‐methacryloyloxymethyl‐2‐(p‐methoxystyryl)‐[1,3]dioxane) (PEMpMSD) and poly(5‐ethyl‐5‐methacryloyloxymethyl‐2‐(o‐methoxystyryl)‐[1,3]dioxane) (PEMoMSD) as well as poly(5‐ethyl‐5‐methacryloyloxymethyl‐2‐styryl‐[1,3]dioxane) were synthesized via reversible addition‐fragmentation chain transfer (RAFT) process. The results demonstrated that the para‐methoxy substitution of EMpMSD monomer led to the more shortened initialization period and rapid chain propagation of RAFT process than 5‐ethyl‐5‐methacryloyloxymethyl‐2‐styryl‐[1,3]dioxane monomer under mild visible light radiation at 25 °C. The ortho‐methoxy substitution of PEMoMSD led to high degree of photoinduced Z‐isomerization over 80%. Moreover, the para‐methoxy substitution of PEMpMSD led to the rapid hydrolysis of the cyclic acetal linkages in ambient acid media, while the ortho‐methoxy substitution of PEMoMSD slowed down this hydrolysis. This hydrolysis slowed down on Z‐isomerization particularly in PEMoMSD. These effects widely broadened the tunability of the light‐modulated acid sensitivity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and thermal characterization of novel poly(tetramethyl‐1,3‐silphenylenesiloxane) derivative with phenol moiety in the main chain

Novel poly(tetramethyl‐1,3‐silphenylenesiloxane) derivative with phenol moiety in the main chain, that is, poly(tetramethyl‐5‐hydroxy‐1,3‐silphenylenesiloxane) ( P1 ), was synthesized and the thermal properties were investigated by differential scanning calorimetry (DSC) and thermogravimetry (TG). P1 was obtained via deprotective hydrogenation of poly(tetramethyl‐5‐benzyloxy‐1,3‐silphenylenesiloxane) ( Pre‐P1 ) catalyzed by 10% palladium on charcoal as well as via direct polycondensation of 3,5‐bis(dimethylhydroxysilyl)phenol ( M2 ). Pre‐P1 was obtained by polycondensation of 1,3‐bis(dimethylhydroxysilyl)‐5‐benzyloxybenzene ( M1 ), catalyzed by 1,1,3,3‐tetramethylguanidinium 2‐ethylhexoate. M1 was prepared by the Grignard reaction using chlorodimethylsilane and 1,3‐dibromo‐5‐benzyloxybenzene followed by the hydrolysis catalyzed by 5% palladium on charcoal. M2 was prepared by deprotective hydrogenation of M1 catalyzed by 10% palladium on charcoal. The obtained P1 was soluble in common organic solvents such as tetrahydrofuran, chloroform, dichloromethane, toluene, and so forth as well as in highly polar solvents as ethanol and methanol in which poly(tetramethyl‐1,3‐silphenylenesiloxane) is insoluble. The glass transition temperature (T_g) of P1 was determined to be 40 °C from DSC, which was much higher than that of poly(tetramethyl‐1,3‐silphenylenesiloxane) (?52 °C), indicating that the intermolecular and/or intramolecular hydrogen bondings based on hydroxyl groups restricted the mobility of the main chain. The temperature at 5% weight loss (T_d5) of P1 (393 °C) determined by TG was lower than that of poly(tetramethyl‐1,3‐silphenylenesiloxane) (ca. 500 °C), indicating that the phenol moieties decline the thermal stability; however, the obtained P1 would promise to be a new reactive‐polymer with phenolic–hydroxyl moieties to develop new functional materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 692–701, 2008     

Synthesis of an amphiphilic polymer having hydrophobic acetal and hydrophilic pyrrolidone moieties and its application to persisting release of aldehyde as a pro‐fragrance

A polymer having acetal moiety in the side chain was synthesized by a reaction of 1,3‐diol structure of poly(vinyl alcohol‐co‐N‐vinylpyrrolidone) and octanal. The hydrophobicity of the resulting acetal moiety and the hydrophilicity of the pyrrolidone moiety allowed the polymer to exhibit amphiphilicity. The polymer released octanal by hydrolysis of the acetal side chains under acidic conditions. The release of octanal was enhanced by the increased hydrophilicity of the polymer because of the presence of pyrrolidone moiety. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3816–3822, 2010     

Polyaddition of bifunctional 1,3‐benzoxazine and 2‐methylresorcinol

A polyaddition system consisted of a bifunctional N‐n‐propyl benzoxazine and 2‐methylresorcinol ( MR ) that proceeds at ambient temperature has been developed. In this system, the aromatic ring of MR acted as a bifunctional monomer, reacting with a two equivalent amount of benzoxazine moieties via their ring‐opening reaction. The polyaddition gave the corresponding linear polymer bearing phenolic moieties bridged by Mannich‐type linkage in the main chain. The linear polymer had a high glass transition temperature, which was comparable to that of the linear polybenzoxazine synthesized by the ring‐opening polymerization of a monofunctional N‐n‐propyl benzoxazine. The employment of a bifunctional N‐allyl benzoxazine in the polyaddition system resulted in the formation of the corresponding polymer with allyl pendants, which exhibited improved heat resistance due to its thermally induced crosslinking reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3867–3872     

Single‐chain nanoparticles with well‐defined structure via intramolecular crosslinking of linear polymers with pendant benzoxazine groups

Controlled intramolecular collapse of linear polymer chains with crosslinkable groups is an efficient way to prepare single‐chain nanoparticles in the size range of 5–20 nm. However, the nature of the crosslinking group is critical. In present study, poly(styrene‐co‐chloromethyl styrene) [P(St‐co‐CMS)] was synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization and then was converted into polystyrene azide (PS? N₃). Polystyrene containing benzoxazine side groups [P(St‐co‐BS)], which can be used as the precusor for the later intramolecular collapse, was obtained from PS? N₃ and 3‐(4‐(prop‐2‐ynyloxy)phenyl)‐3,4‐dihydro‐2H‐benzo[e][1,3]oxazine (P‐APPE) via the method of click chemistry. The sub‐20 nm polymeric nanoparticles with well‐defined structure via thermally intramolecular crosslinking of P(St‐co‐BS) were prepared. The structure change from the linear polymers to the single‐chain nanoparticles was confirmed by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and gel permeation chromatography (GPC). The morphology and the dimension of the nanoparticles were characterized by using transmission electron microscope (TEM), atomic force microscopy (AFM), as well as dynamic light scattering (DLS). The results reveal that the size of the nanoparticles can be regulated by changing the molecular weight of the precursors and the amount of pendant benzoxazine groups by the use of controlled polymerization techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Self‐healing of poly(propylene oxide)‐polybenzoxazine thermosets by photoinduced coumarine dimerization

In this work, a self‐healing strategy for poly(propylene oxide)s bearing coumarine‐benzoxazine units (PPO‐CouBenz)s based on light induced coumarine dimerization reactions is described. Four different types of poly(propylene oxide) amines with molecular weights ranging from 440 to 5000 Da were reacted with formaldehyde and 4‐methyl‐7‐hydroxycoumarin to yield desired (PPO‐CouBenz)s. The crosslinked polymer films were prepared by solvent casting of various compositions of PPO‐CouBenzs in chloroform followed by thermal ring opening reaction of benzoxazine groups at 210–240 °C. Thermal curing and thermal stability of the initial PPOs and final products were investigated. Using allyl benzoxazine in the formulation, it was demonstrated that the toughness of the films was improved. Photoinduced healing of coumarin‐based cured PPO‐CouBenz polymer films was investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2911–2918     

Thermally curable polyvinylchloride via click chemistry

Novel side‐chain benzoxazine functional polyvinylchloride (PVC‐Benzoxazine) was synthesized by using “Click Chemistry” strategy. First, approximately 10% of chloro groups of PVC were converted to azido groups by using NaN₃ in N,N‐dimethylformamide. Propargyl benzoxazine was prepared independently by a ring closure reaction between p‐propargyloxy aniline, paraformaldehyde, and phenol. Finally, azidofunctionalized PVC was coupled to propargyl benzoxazine with high efficiency by click chemistry. The spectral and thermal analysis confirmed the presence of benzoxazine functionality in the resulting polymer. It is shown that PVC containing benzoxazine undergoes thermally activated curing in the absence of any catalyst forming PVC thermoset with high thermal stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3512–3518, 2008     

Crosslinked polyamide based on main‐chain type polybenzoxazines derived from a primary amine‐functionalized benzoxazine monomer

Two types of main‐chain type polybenzoxazines with amide and benzoxazine groups as repeating units in the main chain, termed as poly(amide‐benzoxazine), have been synthesized. They have been prepared by polycondensation reaction of primary amine‐bifunctional benzoxazine with adipoyl and isophthaloyl dichloride using dimethylacetamide as solvent. Additionally, a model reaction is designed from the reaction of 3,3′‐(4,4′‐methylenebis(4,1‐phenylene))bis(3,4‐dihydro‐2H‐benzo[e][1,3]oxazin‐6‐amine) with benzoyl chloride. The structures of model compound and polyamides are confirmed by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance (¹H NMR) spectroscopies. Differential scanning calorimetry and FTIR are also used to study crosslinking behavior of both the model compound and polymers. Thermal properties of the crosslinked polymers are also studied by thermogravimetric analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of conducting poly(aniline‐co‐o‐aminophenethyl alcohol)s

Poly(o‐aminophenethyl alcohol) and its copolymers containing the aniline unit were synthesized in aqueous hydrochloric acid medium by chemical oxidative polymerization. The chemical composition of these novel polymers was determined spectroscopically, and their viscosities were measured. These polymers exhibit good solubility in organic solvents that is attributed mainly to the polar hydroxyethyl side groups. Their structures (chain conformation and morphological structure) and properties (conductivity, electrochemical characteristics, glass transition, and degradation behavior) were characterized and then interpreted on the basis of the chemical composition along with the electronic and steric hindrance effects associated with the hydroxyethyl side group. Overall, the side group has a significant effect on the polymerization and influences the structure, chain conformation, and properties of the resultant polymer. The poly(aniline‐co‐o‐aminophenethyl alcohol)s containing 20–40 mol % o‐aminophenethyl alcohol units are potential conducting materials for microelectronic and electromagnetic shielding applications because they are easier to process than polyaniline but retain its beneficial properties. These polymers can also be used as a functional conducting polymer intermediate owing to the reactivity of the side group. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 983–994, 2002     

Incorporation of ketone groups into poly(4‐hydroxystyrene)s main chain by radical copolymerization of 2,2‐diphenyl‐4‐methylene‐1,3‐dioxorane with O‐protected hydroxystyrenes and their photodegradable behavior

Here we report the incorporation of ketone groups into poly(4‐hydroxystyrene)s main chain by radical copolymerization of O‐protected hydroxystyrenes such as 4‐ethoxyethoxystyrene and 4‐acetoxystyrene with 2,2‐diphenyl‐4‐methylene‐1,3‐dioxorane (DPMD) followed by removal of the protective groups and the photodegradable behavior of obtained copolymers. The copolymerization of O‐protected hydroxystyrenes with DPMD gave the corresponding copolymers bearing DMPD‐derived ketone groups in the main chain, of which content could be controlled by changing monomer feed ratio. The ethoxyethyl and acetyl groups of the obtained copolymers were completely removed under acidic and basic conditions, respectively, to afford poly(4‐hydroxystyrene)s having ketone moieties in the main chain. The molecular weights of these copolymers decreased under photoirradiation due to the Norrish‐type reactions of the ketone groups distributed in the main chain. These results demonstrate that poly(4‐hydroxystyrene)s having ketone groups in the main chain possess good photo‐scissibility. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Postpolymerization modification of reactive polymers derived from vinylcyclopropane. III. Polymer sequential functionalization using a combination of amines with alkoxyamines,hydrazides, isocyanates,or acyl halides

A new 1,1‐disubstituted‐2‐vinylcyclopropane monomer bearing a ketone and a pentafluorophenyl ester was synthesized and successfully polymerized to yield a polymer with two side chain moieties readily available for post‐polymerization modification. After a quantitative modification of the pentafluorophenyl moiety with amines, a subsequent second functionalization reaction was successfully performed on the ketone moiety leading to a double side‐chain functionalized polymer using two different routes. The first route utilized hydrazide and hydroxylamine derivatives leading to a ketone conversion of 25 to 85%. In the second route, the ketone moiety was first reduced to alcohol (reduction conversion up to 100%) and then converted into the corresponding ester or urethane using acyl halides or isocyanates, respectively, with a conversion ratio of up to 90%. A library of functionalized polymers was synthesized to confirm the effectiveness of this approach. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2841–2849     

The glucose‐responsive behavior of a block copolymer featuring boronic acid and glycine

Glucose responsive block copolymer featuring boronic acid as a glucose responsive moiety and glycine are reported. The first block is polymerized through reversible addition–fragmentation chain transfer (RAFT) polymerization and the resulting poly(N‐acryloylmorpholine)₁₁₃ (PAcM) is employed as a macro‐chain transfer agent for chain extension with pentafluorophenyl acrylate (PFPA) yielding a well‐defined PAcM₁₁₃‐block‐poly(pentafluorophenyl acrylate)₈₄ (PPFPA). The PPFPA block is then reacted with functional (3‐aminomethyl) phenyl boronic acid and glycine via post‐polymerization modification and the structure of the block copolymer is confirmed by proton nuclear magnetic resonance (NMR), ¹⁹F NMR, Fourier transform infrared, and gel permeation chromatography. By copolymerizing glycine into the polymer backbone, the relative pK_a of the block copolymer is significantly lowered. The block copolymer can self‐assemble into core–shell micelles in aqueous solution and disassemble in response to glucose at the physiological pH. Furthermore, the encapsulation and release of Nile red (NR) as a hydrophobic model drug is studied under the physiological pH. The influence of the glucose concentration on the NR release from the polymeric micelles is demonstrated. These results suggested that the glucose‐responsive poly[(AcM)₁₁₃‐b‐(3‐(aminomethyl)phenylboronic acid hydrochloride(‐co‐Gly)₈₄] block copolymer has potential applications as a glucose‐responsive polymer for insulin delivery. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 422–431     

Thermochemically induced binding of methyl orange to polycations containing primary amine groups

The thermochemical transformation of electrostatically formed complexes of methyl orange (MO) with polycations containing primary amine groups such as ammonium salts afforded new polymers with a high concentration of covalently bound 4‐N,N‐dimethylaminoazobenzene groups in the side chain. Poly(allylamine hydrochloride) and poly(β‐aminoethylene acrylamide hydrochloride) were employed as support polycations for MO. The transformation of sulfonate–ammonium ion pairs into sulfonamide bonds, via heating at an elevated temperature, was supported by the polymer properties before and after the thermal treatment. The polymer structure changes were monitored with elemental analysis, Fourier transform infrared, ¹H NMR, and ultraviolet–visible absorption spectroscopy, and thermogravimetric analysis. The spacer length between the backbone and azobenzene structures used as side chains strongly influenced the polymer properties before and after the heat‐induced reaction. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5898–5908, 2006     

Functional benzoxazines containing ammonium salt of carboxylic acid: Synthesis and highly activated thermally induced ring‐opening polymerization

1,3‐Benzoxazine monomers having ammonium salt of carboxylic acid have been developed. These 1,3‐benzoxazines 1a and 1b were easily synthesized from the corresponding tetrabutylammonium salts of glycine and β‐alanine, respectively. The glycine‐derived benzoxazine 1a exhibited remarkably high reactivity, which allowed its thermally induced ring‐opening polymerization in bulk at 100 °C, at which N‐methyl‐1,3‐benzoxazine 1d did not undergo the polymerization at all. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of amphiphilic polyacetal by polycondensation of aldehyde and polyethylene glycol as an acid‐labile polymer for controlled release of aldehyde

A new acid‐labile polymer having acetal moieties in the main chain was synthesized by polycondensation of poly (ethylene glycol) (PEG) and lilial, an aldehyde widely used in fragrance applications. The hydrophobicity of the resulting acetal moiety and the hydrophilicity of the PEG chain allowed the polyacetal to exhibit amphiphilicity. The polyacetal derived from PEG having weight average molecular weight (M_w) of 1000 (PEG1000) was soluble in water and self‐associated to form associates in water. The polyacetals were hydrolyzed in acidic aqueous solutions to release hydrophobic lilial from the systems. The release rate of aldehyde from the polyacetal derived from PEG1000 was higher than that from the polyacetal derived from PEG having M_w of 400 (PEG400). These results supported that the release rate of lilial can be controlled by the chain length of PEG, on which hydrophilicity of polyacetal depends. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010