Polysiloxane‐containing benzoxazine moieties in the main chain

Polysiloxanes containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diallyl functional benzoxazine monomer is synthesized through the Mannich and respective ring closing reactions of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde, and allyamine. Subsequent hydrosilylation reaction of the resulting allylic monomer (B‐ala) with 1,1,3,3‐tetramethyldisiloxane (TMDS) in the presence of Pt catalyst yields the corresponding oligo(B‐ala‐tetramethyldisiloxane)s (OBTMDS). Using the anionic polymerization route, OBTMDS was then converted to poly(bisbenzoxazinedimethylsiloxane)s (PBDMSs) by reacting with readily available cyclic oligomer octamethylcyclotetrasiloxane (D4) or decamethylcyclopentasiloxane (D5) in the presence of tetrabutylammonium hydroxide as catalyst. The structures of the precursor diallyl monomer, the intermediate oligomer, and the resulting polymers are confirmed by Fourier transform infrared and ¹H NMR analysis. Curing behavior of the products at various stages has also been studied by differential scanning calorimetry. Flexible transparent films of the PBDMSs are obtained by solvent casting. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A novel benzimidazole moiety‐containing benzoxazine: Synthesis,polymerization, and thermal properties

A novel benzoxazine‐containing benzimidazole moiety (P‐PABZ) was synthesized from 2‐(4‐aminophenyl)‐1H‐benzimidazole‐5‐amine and characterized. With the aid of differential scanning calorimetry and in situ Fourier transform infrared, we found the thermal polymerization of P‐PABZ in bulk started around 140 °C and its favored polymerization pathway. Compared to the benzoxazine derived from 4,4′‐diamine diphenyl methane (P‐MDA), P‐PABZ exhibited lower processing temperature, and the corresponding polymers had higher glass transition temperature and enhanced thermal stability. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Methylol‐functional benzoxazines as precursors for high‐performance thermoset polymers: Unique simultaneous addition and condensation polymerization behavior

A new class of high‐performance resins of combined molecular structure of both traditional phenolics and benzoxazines has been developed. The monomers termed as methylol‐functional benzoxazines were synthesized through Mannich condensation reaction of methylol‐functional phenols and aromatic amines, including methylenedianiline (4,4′‐diaminodiphenylmethane) and oxydianiline (4,4′‐diaminodiphenyl ether), in the presence of paraformaldehyde. For comparison, other series of benzoxazine monomers were prepared from phenol, corresponding aromatic amines, and paraformaldehyde. The as‐synthesized monomers are characterized by their high purity as judged from ¹H NMR and Fourier transform infrared spectra. Differential scanning calorimetric thermograms of the novel monomers show two exothermic peaks associated with condensation reaction of methylol groups and ring‐opening polymerization of benzoxazines. The position of methylol group relative to benzoxazine structure plays a significant role in accelerating polymerization. Viscoelastic and thermogravimetric analyses of the crosslinked polymers reveal high T_g (274–343 °C) and excellent thermal stability when compared with the traditional polybenzoxazines. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and crosslinking behavior of a novel linear polymer bearing 1,2,3‐triazol and benzoxazine groups in the main chain by a step‐growth click‐coupling reaction

The click‐coupling reaction was applied to polycondensation, to synthesize a high‐molecular weight prepolymer having benzoxazine moieties in the main chain. For the polycondensation, a bifunctional N‐propargyl benzoxazine was synthesized from bisphenol A, propargylamine, and formaldehyde. The propargyl group was efficiently used for the copper(I)‐catalyzed alkyne‐azide “click” reaction with p‐xylene‐α,α′‐diazide, to give the corresponding linear polycondensate having 1,2,3‐triazole junctions. The polycondensation proceeded in N,N‐dimethylformamide (DMF) at room temperature. By this highly efficient “click‐” polycondensation reaction, the benzoxazine ring in the monomer was successfully introduced into the polymer main chain without any side reaction. The obtained polymer (=prepolymer) underwent thermal crosslinking to afford the corresponding product, which was insoluble in a wide range of organic solvents and exhibited higher thermal stability than the polymer before crosslinking. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2316–2325, 2008     

Single‐chain nanoparticles with well‐defined structure via intramolecular crosslinking of linear polymers with pendant benzoxazine groups

Controlled intramolecular collapse of linear polymer chains with crosslinkable groups is an efficient way to prepare single‐chain nanoparticles in the size range of 5–20 nm. However, the nature of the crosslinking group is critical. In present study, poly(styrene‐co‐chloromethyl styrene) [P(St‐co‐CMS)] was synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization and then was converted into polystyrene azide (PS? N₃). Polystyrene containing benzoxazine side groups [P(St‐co‐BS)], which can be used as the precusor for the later intramolecular collapse, was obtained from PS? N₃ and 3‐(4‐(prop‐2‐ynyloxy)phenyl)‐3,4‐dihydro‐2H‐benzo[e][1,3]oxazine (P‐APPE) via the method of click chemistry. The sub‐20 nm polymeric nanoparticles with well‐defined structure via thermally intramolecular crosslinking of P(St‐co‐BS) were prepared. The structure change from the linear polymers to the single‐chain nanoparticles was confirmed by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and gel permeation chromatography (GPC). The morphology and the dimension of the nanoparticles were characterized by using transmission electron microscope (TEM), atomic force microscopy (AFM), as well as dynamic light scattering (DLS). The results reveal that the size of the nanoparticles can be regulated by changing the molecular weight of the precursors and the amount of pendant benzoxazine groups by the use of controlled polymerization techniques. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and study of the thermal crosslinking of bis(m‐aminophenyl) methylphosphine oxide based benzoxazine

Bis(m‐aminophenyl)methylphosphine oxide based benzoxazine (Bz‐BAMPO) was obtained using a three‐step synthetic method from the aromatic diamine and 2‐hydroxybenzaldehyde as starting materials. The structure and purity of the monomer was confirmed by elemental analysis, FTIR, ¹H NMR, ¹³C NMR and ³¹P NMR spectra. The curing kinetics of Bz‐BAMPO was investigated by nonisothermal differential scanning calorimetry (DSC) at different heating rates and by FTIR spectroscopy. The isoconversional method was used to evaluate the dependence of the effective activation energy on the extent of conversion. The evolving factor analysis (EFA) method was applied to the spectroscopic FTIR data obtained in monitoring benzoxazine homopolymerizations. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7162–7172, 2008     

Synthesis,characterization, and thermally activated curing of oligosiloxanes containing benzoxazine moieties in the main chain

Oligosiloxanes containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diallyl functional monomer is synthesized through the Mannich and ring closing reaction of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde and allylamine. Hydrosilylation reaction of the resulting diallylic monomer (B‐ala) with 1,1,3,3‐tetramethyldisiloxane (TMDS) in the presence of Pt catalyst yields the corresponding poly(B‐ala‐tetramethyl disiloxane)s (PBTMDS) with the molecular weights in the range of 1800–4100 Da. The structures of the precursor diallyl monomer and the resulting polymers are confirmed by FT‐IR and ¹H NMR analysis. Curing behavior of both the monomer and polymers has also been studied by Differential Scanning Calorimetry (DSC). Flexible free standing transparent films of the oligosiloxanes are obtained by solvent casting from dichloromethane solution on Teflon plates. The films preserve shape and, to some extent, toughness after thermal curing between 100 and 180 °C. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis (TGA). © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 804–811, 2009     

Synthesis,characterization, and properties of new thermally curable polyetheresters containing benzoxazine moieties in the main chain

High molecular weight polyetheresters (PEE) containing thermally curable benzoxazine units in the main chain have been synthesized. For this purpose, first the diol functional monomer is synthesized through the Mannich reaction of 4,4′‐isopropylidenediphenol (bisphenol A), formaldehyde, and 2‐(2‐aminoethoxy)ethanol. Polycondensation of the resulting benzoxazine dietherdiol with adipoyl chloride and terephthaloyl dichloride in the presence of triethyl amine yields the corresponding PEE with the molecular weights of 34.000 Da. The structures of the precursor diol monomer and the resulting PEEs are confirmed by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy (¹H‐NMR) analysis. Curing behavior of both the monomer and polymers has also been studied by differential scanning calorimetry (DSC). Flexible free standing transparent films of the PEEs are obtained by solvent casting from dichloromethane solution on Teflon plates. The films preserve shape and, to some extent, toughness after thermal curing between 140 and 220 °C. Thermal properties of the cured polymers are also investigated by thermogravimetric analysis (TGA). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 414–420, 2008     

Synthesis and characterization of sulfone containing main chain oligobenzoxazine precursors

The preparation of soluble and processable polybenzoxazine precursors capable of forming high performance networks is an important field of research with a broad spectrum of application. This study demonstrates an approach that utilizes aromatic sulfonediamine, bisphenol‐A, and formaldehyde in Mannich‐type polycondesation to prepare polybenzoxazine precursor. The structure of the oligomeric precursor (M_n = 2600) was confirmed by FTIR and ¹H NMR spectral analysis. The precursor contained both sulfone and benzoxazine ring structures in the backbone. It was shown that small amount of ring‐opened phenolic groups were also present. Thermally activated self‐curing behavior of precursor in the absence of catalyst was studied by differential scanning calorimetry. Thermal properties of the cured polymers were also investigated by thermo gravimetric analysis. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Intrinsic self‐initiating thermal ring‐opening polymerization of 1,3‐benzoxazines without the influence of impurities using very high purity crystals

A phenol/aniline type monofunctional benzoxazine monomer, PH‐a , is synthesized and highly purified to study the intrinsic thermal ring‐opening polymerization of benzoxazines without the influence of any impurity. The successful synthesis of the monomer and its corresponding chemical structure are confirmed by Fourier transform infrared spectroscopy (FTIR) and ¹H nuclear magnetic resonance (¹H NMR) spectroscopy. Purity of the compound is evaluated through differential scanning calorimetry (DSC) as well as elemental analysis (EA). Moreover, the thermal behavior of benzoxazine monomer toward polymerization is also studied by DSC, indicating that the highly purified benzoxazine monomer actually polymerize upon heating. The results present evidence of an intrinsic tendency for 1,3‐benzoxazines to undergo thermally induced ring‐opening polymerization upon heating only without any impurity participating during the reaction. This reveals that polybenzoxazines can be obtained by both the traditional thermally accelerated (or activated) polymerization, where impurities or purposefully added initiators are involved in the reaction; or, by the classic thermal polymerization, where only heat is enough to initiate the reaction. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3434–3445     

Synthesis of polymers bearing 1,3‐benzoxazine moiety in the side chains from poly(allylamine) and their crosslinking behaviors

A polymer bearing 1,3‐benzoxazine moiety in the side chain was synthesized successfully from poly(allylamine) based on a stepwise strategy consisted of three steps: (1) treatment of poly(allylamine) with salicylaldehyde to convert the amino group in the side chain into the corresponding o‐(iminomethyl)phenol moiety, (2) reduction of the o‐(iminomethyl)phenol to obtain the corresponding o‐(aminomethyl)phenol moiety, and (3) formation of 1,3‐benzoxazine moiety by the reaction of the o‐(aminomethyl)phenol with formaldehyde. The content ratio of benzoxazine moieties and o‐(aminomethyl)phenol moieties in the polymer were tunable by varying amount of formaldehyde. The presence of o‐(aminomethyl)phenol moieties exhibited a significant promoting effect on the crosslinking reaction. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Concerted reactions of aldehyde groups during polymerization of an aldehyde‐functional benzoxazine

Polymerization reactions of a new aldehyde‐functional benzoxazine (4HBA‐a) were investigated in detail. The curing behavior of 4HBA‐a was studied by differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) methods. The results indicate that the disappearance of the aldehyde group from 4HBA‐a and the ring‐opening reaction of 4HBA‐a occur simultaneously. Gases evolved during the curing process of 4HBA‐a were analyzed by thermogravimetric analyzer interfaced with FTIR spectra. The elimination of CO₂ is attributed to the oxidation and decarboxylation of the aldehyde groups. In addition, the crosslink sites of the aldehyde groups in the polymer structure are confirmed by model reactions. A possible reactive position should be sited in ortho position of phenol rather than ortho and/or para positions of N‐phenyl ring. Finally, the crosslinked structures of polymerized 4HBA‐a have been proposed. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Spectroscopic studies of interactions in poly(N‐acryloyl‐N′‐methylpiperazine)/acidic polymer complexes

Poly(N‐acryloyl‐N′‐methylpiperazine) (PAMP) forms complexes with four strong acidic polymers, namely, poly(styrenesulfonic acid), poly(vinylphosphonic acid), poly(acrylic acid) and poly(methacrylic acid) in ethanol/water (1:1) solution. The nature of interpolymer interactions in various complexes was studied by Fourier transform infrared (FTIR) spectroscopy and X‐ray photoelectron spectroscopy (XPS). Both the carbonyl oxygen and the amide nitrogen of PAMP are involved in hydrogen‐bonding interactions. Some of the amine nitrogens of PAMP are protonated and therefore PAMP also interacts with the acidic polymers through ionic interactions. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 501–508, 2000     

Synthesis of high thermal stability polybenzoxazoles via ortho‐imide‐functional benzoxazine monomers

We report our work for preparing cross‐linked polyimide via a series of imide functional benzoxazine resins as precursors. The structures of synthesized monomers have been confirmed by ¹H NMR and FT‐IR. Among this class of benzoxazine monomers, the ortho‐imide functional benzoxazine resins show useful features both in the synthesis of benzoxazine monomers and the properties of the corresponding thermosets. For the cross‐linked polyimides based on ortho‐imide functional benzoxazine, an additional route is adopted to form a more thermally stable cross‐linked polybenzoxazole with the release of carbon dioxide. The ortho‐imide functional benzoxazine resins show the possibility to form high performance and even super high performance thermosets with low cost and easy processability. The thermal properties are evaluated by DSC and TGA. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1330–1338     

One‐pot synthesis and characterization of hyperbranched poly(ester‐amide)s from commercially available dicarboxylic acids and multihydroxyl secondary amines

A convenient and cost‐effective strategy for synthesis of hyperbranched poly(ester‐amide)s from commercially available dicarboxylic acids (A₂) and multihydroxyl secondary amine (CB₂) has been developed. By optimizing the conditions of model reactions, the AB₂‐type intermediates were formed dominantly during the initial reaction stage. Without any purification, the AB₂ intermediate was subjected to thermal polycondensation in the absence of any catalyst to prepare the aliphatic and semiaromatic hyperbranched poly(ester‐amide)s bearing multi‐hydroxyl end‐groups. The FTIR and ¹H NMR spectra indicated that the polymerization proceeded in the proposed way. The DBs of the resulting polymers were confirmed by a combination of inverse‐gated decoupling ¹³C NMR, and DEPT‐135 NMR techniques. The DBs of the hyperbranched poly(ester‐amide)s were in the range of 0.44–0.73, depending on the structure of the monomers used. The hyperbranched polymers exhibited moderate molecular weights with relatively broad distributions determined by SEC. All the polymers displayed low inherent viscosity (0.11–0.25 dL/g) due to the branched nature. Structural and end‐group effects on the thermal properties of the hyperbranched polymers were investigated using DSC. The thermogravimetric analysis revealed that the resulting polymers exhibit reasonable thermal stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5077–5092, 2008     

Deprotection‐free preparation of propargyl ether‐containing phosphinated benzoxazine and the structure–property relationship of the resulting thermosets

Generally, protection and deprotection procedures of amino groups are required in preparing propargyl ether‐containing benzoxazines. In this study, we report a facile, deprotection‐free preparation of a propargyl ether‐containing phosphinated benzoxazine (2) from the nucleophilic substitution of a phenolic OH‐containing phosphinated benzoxazine (1) and propargyl bromide in the catalysis of potassium carbonate. The structure of (2) was characterized and confirmed by a high‐resolution mass spectrum, ¹H, ¹³C, ¹H‐¹H, ¹H‐¹³C nuclear magnetic resonance (NMR) spectra, and X‐ray single crystal diffractogram. infrared (IR) and differential scanning calorimetry were used to monitor the ring‐opening of benzoxazine and crosslinking of propargyl ether. The microstructure and the structure–property relationship of the resulting homopolymers and copolymers are discussed. The T_g of homopolymer of (2) is 208 °C by dynamic mechanical analysis, the coefficient of thermal expansion is 43 ppm/°C, and T_d 5% (N₂) is 393 °C, respectively, which are higher than those of the homopolymer of (1) . Similar trends were observed in the copolymerization system. The results demonstrate the beneficial effect of crosslinking afforded by the propargyl ether group is higher than that by the phenolic OH group. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Diethylphosphonate‐containing benzoxazine compound as a thermally latent catalyst and a reactive property modifier for polybenzoxazine‐based resins

A diethylphosphonate‐containing benzoxazine compound (DEP‐Bz) to be used as a multi‐functional reaction agent for preparation of high performance polybenzoxazine thermosetting resins has been reported. The chemical structure of DEP‐Bz has been characterized with FTIR, ¹H NMR, and elemental analysis. The phosphonate groups of DEP‐Bz could convert into phosphonic acid groups which could catalyze the ring‐opening addition reaction of benzoxazines, to demonstrate the thermally latent catalytic effect of DEP‐Bz on the polymerization of benzoxazine compounds. Moreover, DEP‐Bz could also serve as a reactive‐type modifier for polybenzoxazines and other thermosets. DEP‐Bz modified polybenzoxazine resins have shown relatively low reaction temperature (about 190 °C), high mechanical strength with a storage modulus of about 3.0 GPa, and high flame retardancy with a limit oxygen index of about 32. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3523–3530     

Synthesis of optically active poly(amide‐imide)s derived from N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L‐leucine diacid chloride and aromatic diamines by microwave radiation

3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (4,4′‐carbonyldiphathalic anhydride) was reacted with L ‐leucine in a mixture of acetic acid and pyridine (3 : 2), and the resulting imide‐acid [N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L ‐leucine diacid] was obtained in quantitative yield. The compound was converted to the N,N′‐(4,4′‐carbonyldiphthaloyl)‐bis‐L ‐leucine diacid chloride by reaction with thionyl chloride. A new facile and rapid polycondensation reaction of this diacid chloride with several aromatic diamines such as 4,4′‐diaminodiphenyl methane, 2,4‐diaminotoluene, 4,4′‐sulfonyldianiline, p‐phenylenedi‐amine, 4,4′‐diaminodiphenylether, and m‐phenylenediamine was developed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as O‐cresol. The polymerization reactions proceeded rapidly compared with the conventional solution polycondensation and were completed within 6 min, producing a series of optically active poly(amide‐imide)s with a high yield and an inherent viscosity of 0.37–0.57 dL/g. All of the above polymers were fully characterized by IR, elemental analyses, and specific rotation. Some structural characterization and physical properties of these optically active poly(amide‐imide)s are reported. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 177–186, 2001     

Polyaddition of bifunctional 1,3‐benzoxazine and 2‐methylresorcinol

A polyaddition system consisted of a bifunctional N‐n‐propyl benzoxazine and 2‐methylresorcinol ( MR ) that proceeds at ambient temperature has been developed. In this system, the aromatic ring of MR acted as a bifunctional monomer, reacting with a two equivalent amount of benzoxazine moieties via their ring‐opening reaction. The polyaddition gave the corresponding linear polymer bearing phenolic moieties bridged by Mannich‐type linkage in the main chain. The linear polymer had a high glass transition temperature, which was comparable to that of the linear polybenzoxazine synthesized by the ring‐opening polymerization of a monofunctional N‐n‐propyl benzoxazine. The employment of a bifunctional N‐allyl benzoxazine in the polyaddition system resulted in the formation of the corresponding polymer with allyl pendants, which exhibited improved heat resistance due to its thermally induced crosslinking reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3867–3872     

Hydrogen‐bonding characteristics and unique ring‐opening polymerization behavior of Ortho‐methylol functional benzoxazine

Monofunctional benzoxazine with ortho‐methylol functionality has been synthesized and highly purified. The chemical structure of the synthesized monomer has been confirmed by ¹H and ¹³C nuclear magnetic resonance spectroscopy (NMR), Fourier transform infrared spectroscopy (FT‐IR) and elemental analysis. One‐dimensional (1D) ¹H NMR is used with respect to varied concentration of benzoxazines to study the specific nature of hydrogen bonding in both ortho‐methylol functional benzoxazine and its para counterpart. The polymerization behavior of benzoxazine monomer has been also studied by in situ FT‐IR and differential scanning calorimetry, experimentally supporting the polymerization mechanism of ortho‐methylol functional benzoxazine we proposed before. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3635–3642