Plasmonics properties of trimetallic Al@Al2O3@Ag@Au and Al@Al2O3@AuAg nanostructures

Bimetallic and trimetallic nanoparticles have attracted significant attention in recent times due to their enhanced electrochemical and catalytic properties compared to monometallic nanoparticles. The numerical calculations using Mie theory has been carried out for three-layered metal nanoshell dielectric–metal–metal (DMM) system consisting of a particle with a dielectric core (Al@Al₂O₃), a middle metal Ag (Au) layer and an outer metal Au (Ag) shell. The results have been interpreted using plasmon hybridization theory. We have also prepared Al@Al₂O₃@Ag@Au and Al@Al₂O₃@AgAu triple-layered core–shell or alloy nanostructure by two-step laser ablation method and compared with calculated results. The synthesis involves temporal separations of Al, Ag, and Au deposition for step-by-step formation of triple-layered core–shell structure. To form Al@Ag nanoparticles, we ablated silver for 40 min in aluminium nanoparticle colloidal solution. As aluminium oxidizes easily in water to form alumina, the resulting structure is core–shell Al@Al₂O₃. The Al@Al₂O₃ particle acts as a seed for the incoming energetic silver particles for multilayered Al@Al₂O₃@Ag nanoparticles is formed. The silver target was then replaced by gold target and ablation was carried out for different ablation time using different laser energy for generation of Al@Al₂O₃@Ag@Au core–shell or Al@Al₂O₃@AgAu alloy. The formation of core–shell and alloy nanostructure was confirmed by UV–visible spectroscopy. The absorption spectra show shift in plasmon resonance peak of silver to gold in the range 400–520 nm with increasing ablation time suggesting formation of Ag–Au alloy in the presence of alumina particles in the solution.     

A facile strategy to synthesize bimetallic Au/Ag nanocomposite film by layer-by-layer assembly technique

A facile strategy has been developed for the preparation of bimetallic gold–silver (Au–Ag) nanocomposite films by alternating absorption of poly-(ethyleneimine)–silver ions and Au onto substrates and subsequent reduction of the silver ions. The composition, micro-structure and properties of the {PEI–Ag/Au}_n nanocomposite films were characterized by ultraviolet visible spectroscopy (UV–vis), transmisson electron microscopy (TEM), field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), surface enhanced Raman scattering (SERS) and cyclic voltammetry (CV). The UV–vis characteristic absorbances of {PEI–Ag/Au}_n nanocomposite thin film increase almost linear with the number of bilayers, which indicates a process of uniform assembling. Appearance of a double plasmon bands in the visible region and the lack of apparent core–shell structures in the TEM images confirm the formation of bimetallic Au–Ag nanoparticles. The result of XPS also demonstrates the existence of Ag and Au nanoparticles in the nanocomposite films. TEM and FESEM images show that these Ag and Au nanoparticles in the films possess sphere structure with the size of 20–25 nm. The resulting {PEI–Ag/Au}_n films inherit the properties from both the metal Ag and Au, which exhibits a unique performance in SERS and electrocatalytic activities to the oxidation of dopamine. As a result, the {PEI–Ag/Au}_n films are more attractive compared to {PEI–Ag/PSS}_n and {PEI/Au}_n films.     

A novel method of nanocrystal fabrication based on laser ablation in liquid environment

Metal nanoparticles can be prepared by a novel technique that consists of the laser ablation of a solid target immersed in a water solution of a metal salt. Silicon was chosen as the most adequate target to synthesize silver and gold nanoparticles from a water solution of either AgNO₃ or HAuCl₄. The influence of both the silver nitrate concentrations and the irradiation time of the Si target on the optical properties of the Au and Ag nanoparticles have been investigated. The crystalline nature of the metal nanoparticles has been determined by X-ray diffraction (XRD). Average size and particle size distribution have been measured by means of TEM. The absorbance spectra show the characteristic band of the surface resonant plasmon of silver and gold nanoparticles.     

Comparison of silver nanoparticles confined in nanoporous silica prepared by chemical synthesis and by ultra-short pulsed laser ablation in liquid

Hexagonally ordered mesoporous silica materials, MCM-41 and SBA-15, have been synthesized and loaded with Ag nanoparticles, utilizing both chemical synthesis and ultra-short pulsed laser ablation in liquid. In laser ablation, a silver target, immersed in aqueous suspension of ordered mesoporous silica SBA-15, was irradiated by ultra-short laser pulses to generate silver nanoparticles. For comparison, samples of similar silver contents were prepared either by incorporating silver into the SBA-15 during a hydrothermal synthesis or by introducing silver in MCM-41 by template ion-exchange. Samples were characterized by XRD, N₂ physisorption, TEM and UV–vis spectroscopy. All preparations contained significant amount of 5–50 nm size silver agglomerates on the outer surface of the silica particles. The laser ablation process did not cause significant destruction of the SBA-15 structure and metallic silver (Ag⁰) nanoparticles were mainly generated. It is demonstrated that by laser ablation in aqueous silica suspension smaller and more uniform metallic silver particles can be produced and loaded on the surface of the silica support than by synthesis procedures. Catalytic properties of the samples have been tested in the total oxidation of toluene. Because of its favorable Ag dispersity, the Ag/SBA-15 catalyst, generated by the laser ablation method, had better catalytic stability and, relative to its Ag load, higher activity than the conventional Ag/SBA-15 preparations.     

Synthesis of composite gold/tin-oxide nanoparticles by nano-soldering

Composite Au–SnO₂ nanoparticles (NPs) are synthesized by nano-soldering of pure Au and SnO₂ NPs. The multi-step process involves synthesis of pure Au and SnO₂ NPs separately by nanosecond pulse laser ablation of pure gold and pure tin targets in deionized water and post-ablation laser heating of mixed solution of Au colloidal and SnO₂ colloidal to form nanocomposite. Transmission Electron Microscopy (TEM) and High-Resolution Transmission Electron Microscopy (HRTEM) were used to study the effect of laser irradiation time on morphology of the composite Au–SnO₂ NPs. The spherical particles of 4 nm mean size were obtained for 5 min of post-laser heating. Increased mean size and elongated particles were observed on further laser heating. UV–vis spectra of Au–SnO₂ nanocomposites show red shift in the plasmon resonance absorption peak and line shape broadening with respect to pure Au NPs. The negative binding energy shift of Au 4f_7/2 peak observed in X-ray Photoelectron Spectra (XPS) indicates charge transfer in the nano-soldered Au–SnO₂ between gold and tin oxide and formation of soldered nanocomposite.     

Dynamics of formation and decay of supercritical fluid silver colloid under pulse laser ablation conditions

The effect of the density of supercritical carbon dioxide (SC-CO₂) on the dynamics of formation of supercritical fluid (SCF) silver colloids during pulse laser ablation and their post-pulse degradation was studied by in situ UV/vis absorption spectroscopy. Laser irradiation of a silver target in SC-CO₂ caused ablative formation of Ag nanoparticles of different shapes and sizes: quasi-spherical particles (~4 nm) and larger Ag nanoparticles (hundreds of nanometers). A change in the colloid density from 0.24 to 0.82 g/cm³ caused significant changes in the dynamics of ablative formation of large and small particles, the rate of aggregation of small Ag particles into large particles, and the rate of gravitation-induced sedimentation of nanoparticles in the SCF colloid.     

Fabrication of surface‐enhanced Raman scattering‐active ZnO/Ag composite microspheres

We show in this paper how zinc oxide (ZnO)/silver (Ag) composite microspheres can be prepared by the reduction of Ag(NH₃)₂⁺ with the reducing agent formaldehyde in aqueous solution on the surface of ZnO microspheres. During the preparation, Sn²⁺ was absorbed on the surface of ZnO microspheres for sensitization and activation, and then Ag(NH₃)₂⁺ was reduced to Ag nanoparticles by the reducing agent to obtain ZnO/Ag composite microspheres. SEM and TEM images revealed silver nanoparticles with a diameter ranging from tens to 100 nm. X‐Ray photoelectron spectra (XPS), X‐ray diffraction (XRD) patterns and UV‐vis spectra were used to characterize the structure of the ZnO/Ag composite microspheres. The origin of the surface‐enhanced Raman scattering properties was traced to the surface of the ZnO/Ag composite microspheres. The enhancement factor was estimated in detail, and the enhancement mechanism for the SERS effect was also investigated. Copyright © 2007 John Wiley & Sons, Ltd.     

Biosynthesis of gold and silver nanoparticles by natural precursor clove and their functionalization with amine group

We report a simple and cost effective way for synthesis of metallic nanoparticles (Au and Ag) using natural precursor clove. Au and Ag nanoparticles have been synthesized by reducing the aqueous solution of AuCl₄ and AgNO₃ with clove extract. One interesting aspect here is that reduction time is quite small (few minutes instead of hours as compared to other natural precursors). We synthesized gold and silver nanoparticles of different shape and size by varying the ratio of AuCl₄ and AgNO₃ with respect to clove extract, where the dominant component is eugenol. The evolution of Au and Ag nanoparticles from the reduction of different ratios of AuCl₄ and AgNO₃ with optimised concentration of the clove extract has been evaluated through monitoring of surface plasmon behaviour as a function of time. The reduction of AuCl₄ and AgNO₃ by eugenol is because of the inductive effect of methoxy and allyl groups which are present at ortho and para positions of proton releasing –OH group as two electrons are released from one molecule of eugenol. This is followed by the formation of resonating structure of the anionic form of eugenol. The presence of methoxy and allyl groups has been confirmed by FTIR. To the best of our knowledge, use of clove as reducing agent, the consequent very short time (minutes instead of hours and without any scavenger) and the elucidation of mechanism of reduction based on FTIR analysis has not been attempted earlier.     

Size control synthesis of starch capped-gold nanoparticles

Metallic gold nanoparticles have been synthesized by the reduction of chloroaurate anions [AuCl₄]⁻ solution with hydrazine in the aqueous starch and ethylene glycol solution at room temperature and at atmospheric pressure. The characterization of synthesized gold nanoparticles by UV–vis spectroscopy, high resolution transmission electron microscopy (HRTEM), electron diffraction analysis, X-ray diffraction (XRD), and X-rays photoelectron spectroscopy (XPS) indicate that average size of pure gold nanoparticles is 3.5 nm, they are spherical in shape and are pure metallic gold. The concentration effects of [AuCl₄]⁻ anions, starch, ethylene glycol, and hydrazine, on particle size, were investigated, and the stabilization mechanism of Au nanoparticles by starch polymer molecules was also studied by FT-IR and thermogravimetric analysis (TGA). FT-IR and TGA analysis shows that hydroxyl groups of starch are responsible of capping and stabilizing gold nanoparticles. The UV–vis spectrum of these samples shows that there is blue shift in surface plasmon resonance peak with decrease in particle size due to the quantum confinement effect, a supporting evidence of formation of gold nanoparticles and this shift remains stable even after 3 months.     

Novel fabrication and catalytic application of poly(ethylenimine)-stabilized gold–silver alloy nanoparticles

Novel synthesis of amine-stabilized Au–Ag alloy nanoparticles with controlled composition has been devised using poly(ethylenimine) (PEI) as a reducing and a stabilizing agent simultaneously. The composition of Au–Ag alloy nanoparticles was readily controlled by varying the initial relative amount of HAuCl₄ and AgNO₃. Due to the presence of abundant amine functional groups in PEI, which could act as the dissolving ligand for AgCl, the precipitation problem of Ag⁺ in the presence of Cl⁻ from the gold salt was avoided. On this basis, the relatively high concentrations of HAuCl₄ and AgNO₃ salts were used for the fabrication of Au–Ag alloy nanoparticles. The PEI thus plays triple roles in this study that include the co-reducing agents for HAuCl₄ and AgNO₃, the stabilizing agents for Au–Ag alloy nanoparticles, and even the dissolving agents for AgCl. As a novel material for use in catalysis, the Au–Ag alloy nanoparticles including pure Au and Ag samples were exploited as catalysts for the reduction of 4-nitrophenol in the presence of NaBH₄. As the Au content was increased in the Au–Ag alloy nanoparticles, the rate constant of the reduction was exponentially increased from pure Ag to pure Au.     

Synthesis and characterization of composite Au/TiO2 nanoparticles by laser irradiation

Composite Au/TiO₂ nanoparticles were synthesized by laser ablation of gold plate in TiO₂ sol. The nanoparticles were characterized by UV-visible spectroscopy, transmission electron microscopy, X-ray diffraction, and atomic force microscopy. The peak of surface plasmon is at 550 nm with a red shift of 30 nm compared with that of Au nanoparticles in water. Monolayers of composite Au/TiO₂ nanoparticles were obtained by dip-coating technique. The XRD pattern of Au/TiO₂ powders resembles a mixture of anatase TiO₂ and gold.     

De Haas-van Alphen effect studies in dilute alloys of silver and gold

De Haas-van Alphen experiments have been used to determine the scattering temperatures which characterize the [111] neck and belly extremal orbits in some dilute alloys of silver and gold. The relaxation time is anisotropic withτ _N/τ _B≃2 in both Ag(Au) and Au(Ag) when the scattering is dominated by the solute. This anisotropy is in the opposite sense to that observed in another homovalent alloy Ag(Cu) and to that observed in the presence of charged impurities.     

Nanoparticle preparation of quinacridone and β-carotene using near-infrared laser ablation of their crystals

Quinacridone nanoparticles with a mean size of about 200 nm are successfully prepared using nanosecond near-infrared (NIR) laser ablation of its microcrystalline powders in heavy water. The absorption spectra of the formed colloidal solutions depend on the excitation wavelengths, which is eventually ascribed to number and energy of absorbed photons. β-carotene has low photostability and is easily decomposed upon UV/VIS laser ablation of its solid, while its nanoparticles are prepared utilizing this NIR laser ablation technique. The advantage of nanoparticle preparation by NIR laser ablation is discussed.     

Nonlinear optical properties of nanometer-size silver composite azobenzene containing polydiacetylene film

Diacetylene monomer containing p-nitrophenyl azobenzene moiety (NADA) was synthesized. Silver nanoparticles with different concentrations were adulterated in the above polymerized NADA (PNADA) films and the third-order nonlinear optical properties were investigated in detail. UV–vis spectra and transmission electron microscopy were used to confirm the formation of PNADA/Ag nanocomposite films. The silver nanoparticles (average size of 10 nm) were well dispersed in the polymer films. The value of the nonlinear refractive index n ₂ for PNADA films (8.48×10⁻¹⁵ cm²/W) was much higher than that of pure polydiacetylene films. Further, the introduction of silver nanoparticles into the PNADA polymer films led to the further enhancement of nonlinear optical properties. The maximum value of n ₂ for PNADA/Ag nanocomposite films could be 11.6×10⁻¹⁵ cm²/W. This enhancement should be ascribed to the surface plasmon resonance of silver nanoparticles.     

Generation of higher harmonics of femtosecond radiation in clusters

The frequency conversion of laser radiation in cluster media is studied by the method of laser ablation of surfaces containing different nanoparticles (Cr₂O₃, In₂O₃, Ag, Sn, Au, and Cu). Using plasma that contains In₂O₃ nanoparticles as an example, it is shown that the resonant amplification of certain harmonics in the plateau-like distribution of harmonics, which is characteristic of the ablation of certain solid targets, is considerably modified in the case of targets that contain cluster formations. An increase in the conversion efficiency to harmonics in nanoparticle-containing media is discussed. In order to determine optimal characteristics of laser plasma with nanoparticles, their morphology is studied before and after laser ablation.     

Laser induced synthesis of nanoparticles in liquids

The review of results on nanoparticles formation is presented under laser ablation of Ag, Au, and Cu-containing solid targets in liquid environments (H₂O, C₂H₅OH, C₂H₄Cl₂, etc.). X-ray diffractometry (XRD), UV-vis optical transmission spectrometry, and high resolution transmission electron microscopy (HRTEM) characterize the nanoparticles. The morphology of nanoparticles is studied as the function of both laser fluence and nature of the liquid. The possibility to control the shape of nanoparticles by ablation of an Au target by an interference pattern of two laser beams is demonstrated. Formation of alloyed Au-Ag and Ag-Cu nanoparticles is reported under laser exposure of a mixture of individual nanoparticles. The effect of internal segregation of brass nanoparticles is discussed due to their small lateral dimensions. The factors are discussed that determine the distribution function of particles size under laser ablation. The influence of laser parameters as well as the nature on the liquid on the properties of nanoparticles is elucidated.     

Synthesis and photo physical properties of Au @ Ag (core @ shell) nanoparticles disperse in poly vinyl alcohol matrix

Synthesis of core @ shell (Au @ Ag) nanoparticle with varying silver composition has been carried out in aqueous poly vinyl alcohol (PVA) matrix. Core gold nanoparticle (~15 nm) has been synthesized through seed-mediated growth process. Synthesis of silver shell with increasing thickness (~1–5 nm) has been done by reducing Ag⁺ over the gold sol in the presence of mild reducing ascorbic acid. Characterization of Au @ Ag nanoparticles has been done by UV–Vis, High resolution transmission electron microscope (HRTEM) and energy dispersive X-ray (EDX) spectroscopic study. The blue shift of surface plasmon resonance (SPR) band with increasing mole fraction of silver has been interpreted due to dampening of core, i.e. Au SPR by Ag. The dependence of nonlinear optical response of spherical core @ shell nanoparticles has been investigated as a function of relative composition of each metal. Simulation of SPR extinction spectra based on quasi-static theory is done. A comparison of our experimental and the simulated extinction spectra using quasi-static theory of nanoshell suggests that our synthesized bimetallic particles have core @ shell structure rather than bimetallic alloy particles.     

Bimetallic Au–Ag nanochains as SERS substrates

Au–Ag bimetallic nanochains were prepared using pulsed laser ablation in liquid medium. Synthesis was performed by ablating silver target in a gold colloidal suspension. The plasmon characteristics of the nanostructures are found to be sensitive to ablation duration. AFM and TEM images indicate that almost all nanoparticles, both Au and Ag in the suspension participate in the growth process. An attempt was also made to realize plasmon hybridization by reducing the volume of the suspension by simple evaporation. The nanochains were tested for application as SERS substrates by using crystal violet as probe molecules.     

Nanoparticles produced by laser ablation of solids in liquid environment

A review of results on nanoparticles formation is presented under laser ablation of Ag, Au, and Ti solids targets in liquid environments (H₂O, C₂H₅OH, C₂H₄Cl₂, etc.). X-ray diffractometry (XRD), UV-Vis optical transmission spectrometry, and high-resolution transmission electron microscopy (HRTEM) characterise the nanoparticles. The morphology of nanoparticles is studied as a function of both laser fluence and nature of the liquid. The evidence of an intermediate phase of Au-Ag alloy is presented under exposure of a mixture of individual nanoparticles to laser radiation. Self-influence of the beam of a femtosecond laser is discussed under the ablation of the Ag target in liquids under Ti:sapphire laser. The factors are discussed that determine the distribution function of particle size under laser ablation. The influence of laser parameters as well as the nature on the liquid on the properties of nanoparticles is elucidated. PACS 42.62.-b; 61.46.+w; 78.66.-w     

Elaboration and characterization of bimetallic nanoparticles obtained by laser ablation of Ni75Pd25 and Au75Ag25 targets in water

A YAG laser operating at the second harmonic wavelength (532 nm, 10 Hz, 8 ns and 40 mJ) was used to elaborate bimetallic nanoparticles by laser ablation of Ni₇₅Pd₂₅ and Au₇₅Ag₂₅ targets in water. TEM–EDX, UV–Vis spectroscopy and PIXE measurements were performed to obtain information on their mean sizes, size distributions and chemical composition as a function of the time of laser ablation. The surface of the laser impacted regions of the targets were characterized by RBS in order to check their composition after the laser ablation. The so-obtained bimetallic nanoparticles always show a homogeneous composition. However, while the composition of Au–Ag nanoparticles was found to be very similar to the one of the alloy target, the composition of the Ni–Pd nanoparticles can be different from the nominal composition of the alloy target. Segregation phenomena can be invoked to explain the difference between the Ni–Pd nanoparticles and the Au–Ag nanoparticles compositions obtained in the same conditions. However, an influence of chemical reactions occurring in the high pressure plasma created locally at liquid–solid interface (called ‘reactive quenching’) cannot be completely ruled out.