ELECTRONIC STRUCTURE STUDIES OF THE C60 FILM CONDENSED ON 2H-MoS2(0001) SURFACE

The electronic structure and vibrational spectrum of the C₆₀ film condensed on a 2H- MoS₂(0001) surface have been investigated by X-ray photoelectron spectroscopy (XPS), ul-traviolet photoelectron spectroscopy (UPS), Auger electron spectroscopy (AES) and infrared high-resolution electron-energy-loss spectroscopy (HREELS). AES analysis showed that at low energy side of the main transition, C₆₀ contains a total of three peaks just like that of graphite. However, the energy position of the KLL main Auger transition of C₆₀ looks like that of diamond, indicating that the hybridization of the carbon atoms in C₆₀ is not strictly in sp²- bonded state but that the curvature of the molecular surface introduces some sp²pz- bonded character into the molecular orbitals. XPS showed that the C 1s binding energy in C₆₀ was 285.0eV, and its main line was very symmetric and offered no indication of more than a single carbon species. In UPS measurement the valence band spectrum of C₆₀ within 10eV below the Fermi level (E_F) shows a very distinct five-band structure that character-izes the electronic structure of the C₆₀ molecule. HREEL results showed that the spectrum obtained from the C₆₀ film has very rich vibrational structure. At least, four distinct main loss peaks can be identified below 200 meV. The most intense loss was recorded at 66 meV, and relatively less intense losses were recorded at 95, 164 and 197meV at a primary energy of electron beam E_P = 2.0eV. The other energy-loss peaks at 46, 136, 157 and 186meV in HREEL spectrum are rather weak. These results have been compared to infrared spectrum data of the crystalline solid C₆₀ taken from recent literatures.     

Effects of potassium on the adsorption and dissociation of CH3Cl on Pd(100)

The effects of potassium on the adsorption and dissociation of CH₃Cl on a Pd(100) surface has been investigated by ultraviolet photoelectron spectroscopy (UPS), Auger electron spectroscopy (AES), electron energy loss spectroscopy (in the electronic range EELS), temperature-programmed desorption (TPD) and work function change. In contrast to the clean surface, the adsorption of CH₃Cl caused a significant work function increase, 0.9-1.4 eV, of potassium-dosed Pd. Preadsorbed K enhanced the binding energy of CH₃C1 to the surface and induced the dissociation of adsorbed molecules. The extent of the dissociation increased almost linearly with the potassium content. The appearance of a new emission in the UPS spectrum at 9.2 eV, attributed to adsorbed CH₃ species, and the low-temperature formation of ethane suggest that a fraction of adsorbed CH₃Cl dissociates even at 115–125 K on potassium-dosed Pd(100). At the same time, a significant part of adsorbed CH₃ radical is stabilized, the reaction of which occurs only at 250–300 K. By means of TPD measurements, H₂, CH₄, C₂H₆, C₂H₄, KCl and K were detected in the desorbing gases. The results are interpreted by assuming a through-metal electronic interaction at low potassium coverage and by a direct interaction of the Cl in the adsorbed CH₃Cl with potassium at high potassium coverage. The latter proposal is supported by the electron excited Auger fine structure of the Cl signal and by the formation of KCl in the desorbing gases.     

Electronic Properties of Fullerenes for Two Kinds of Hybridized Orbits

The electronic hopping energies and the band structure of a neutral C₆₀ molecule for two kinds of hybridized orbits, sp³ and sp², are studied using the Wannier function method and tight-binding approximation model, respectively. By comparison, the sp³ hybridized type is superior in the band structure obtained by employing the Wannier function method. When the effective nuclear charge number Z = 1.148 the energy gap (t_lu-h_u), bandwidth (t_3g-a_g) and threshold value (t_3g-h_u) of the ionization energy are 1.70 eV, 11.35 eV and 7.69 eV, respectively. These results are in accord with the experimental values.     

Kinetics of the C2H2 dissociation on Ni(111): A HREELS study

The C₂H₂ isothermal dissociation rate on Ni(111) was measured by following, with HREEL spectroscopy, the intensity of the CH stretching peak as a function of time. By repeating the experiment at several different temperatures we have obtained an activation energy of 1.2 ± 0.1 eV/molecule and a pre-exponential factor of 10^14±1 s⁻¹ for the first step of the C₂H₂ dissociation reaction.     

HREELS of H/GaN(0001): evidence for Ga termination

Two issues relevant to the growth and processing of GaN are the termination of the GaN(0001) surface and its reaction with hydrogen. We have used high-resolution electron energy loss spectroscopy (HREELS), low-energy electron diffraction (LEED), and Auger electron spectroscopy (AES) to study the adsorption of hydrogen on MOCVD-grown GaN(0001). LEED of the sputtered and annealed surface shows evidence of facetting. No adsorbate vibrations are observed on the clean surface by HREELS, only Fuchs–Kliewer phonons at intervals of 700 cm⁻¹. Following exposure of the clean GaN surface to hydrogen atoms, HREEL spectra show adsorbate loss peaks at 2580, 3280, and 3980 cm⁻¹. The Ga–H stretching vibration at 1880 cm⁻¹ becomes evident when the HREEL spectrum is deconvoluted to remove the phonon multiple-loss peaks. We assign the 2580, 3280, and 3980 cm⁻¹ peaks to combination modes of the Ga–H stretch and phonon(s). Upon dosing with deuterium, the Ga–D bending mode is observed at 400 cm⁻¹. No vibrational peaks due to N–H (N–D) species are observed after H (D) exposure. We conclude that sputtered and annealed GaN(0001) is Ga-terminated.     

Photoelectron spectroscopy measurements of the valence band structures of polymerized thin films of C60 and La0.1C60

The electronic valence band structures of polymerized thin films of C₆₀ and La_0.1C₆₀ have been studied by using ultra-violet photoelectron spectroscopy. Additionally, the films have been characterized by using Raman spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The valence band of the C₆₀ film shows major peaks at binding energies of 2.6, 7.2, 10.3, and 12.6 eV. In the case of the doped film, we observe (i) an additional peak with a binding energy of 13.7 eV, (ii) evidence for redistribution of the density of electronic states due to hybridization between the 5d orbitals of La and the C₆₀ cage, and (iii) significantly higher density of the electronic states near the Fermi energy. The valence band spectra of the doped film are in good agreement with recent results of the density functional theory that support strong hybridization between the d-valence orbitals of La and the C₆₀ cage.     

Adsorption and reactions of CH2I2 on Ru(001) surface

The adsorption and dissociation of CH₂I₂ were studied at 110 K with the aim of generating CH₂ species on the Ru(001) surface. The methods used included X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), temperature programmed desorption (TPD), Auger electron spectroscopy (AES) and work function measurements. Adsorption of CH₂I₂ is characterized by a work function decrease (0.96 eV at monolayer), indicating that adsorbed CH₂I₂ has a positive outward dipole moment. Three adsorption states were distinguished: a multilayer (T_p=200 K), a weakly bonded state (T_p=220 K) and an irreversibly adsorbed state. A new feature is the formation of CH₃I, which desorbs with T_p=160 K. The adsorption of CH₂I₂ at 110 K is dissociative at submonolayer, but molecular at higher coverages. Dissociation of the monolayer to CH₂ and I proceeded at 198–230 K, as indicated by a shift in the I(3d_5/2) binding energy from 620.6 eV to 619.9 eV. A fraction of adsorbed CH₂ is self-hydrogenated into CH₄ (T_p=220 K), and another one is coupled to di-σ-bonded ethylene, which — instead of desorption — is converted to ethylidyne at 220–300 K. Illumination of the adsorbed CH₂I₂ initiated the dissociation of CH₂I₂ monolayer even at 110 K, and affected the reaction pathways of CH₂.     

Influence of NH beam bombarding energy on structural characterization and cell attachment of CNx coating

The carbon nitride (CN_x) coating with its novel properties will be excellent candidate for biomedical applications. CN_x coatings were prepared on the surface of Ti–6Al–4V by ion-beam-assisted deposition (IBAD) with different NHⁿ⁺ beam bombarding energies at low substrate temperature. The coatings were characterized by Scanning electron microscopy (SEM), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and Fourier-transform infrared (FTIR) spectroscopy. The result showed that the wear-resistance of CN_x coatings was better at higher beam bombarding energy. The cell attachment tests also gave interesting results that CN_x coatings exhibited low macrophage attachment and provide desirable surface for the normal cellular growth and morphology of the fibroblasts. Structural analysis showed that NHⁿ⁺ beam bombardment at the energies of 300–400 eV could result in more nitrogen concentration and fraction of sp³CN bonds in the structure of CN_x coatings, which may be responsible for the improvement in the wear-resistance and the cell attachment.     

InSb(111)表面硫处理的研究

本文用俄歇电子能谱、X射线光电子能谱和紫外光电子能谱对用硫化铵溶液处理的InSb表面进行研究。结果表明,硫处理以后在样品表面生成。一层厚度约8?的硫化物钝化层,它对防止表面的氧化和碳沾污有明显的钝化作用。钝化层中,破原子既与锑原子成键,引起Sb3d芯能级发生1.9eV的化学位移;又与铟原子成键,引起In4d芯能级发生0.6—0.7eV的化学位移。350℃的真空退火使锑的硫化物发生分解。500℃退火没能使铟的硫化物完全分解,仍有一部分硫原子以铟的硫化物形式留在样品表面。 关键词：     

Study of ion desorption induced by a resonant core-level excitation of condensed H2O using Auger electron photo-ion coincidence (AEPICO) spectroscopy combined with synchrotron radiation

Ion desorption induced by a resonant excitation of O 1s of condensed amorphous H₂O has been studied by total ion and total electron yield spectroscopy, nonderivative Auger electron spectroscopy (AES) and Auger electron photo-ion coincidence (AEPICO) spectroscopy. The spectrum of total ion yield divided by total electron yield exhibits a characteristic threshold peak at hν = 533.4 eV, which is assigned to the 4a₁ ← O 1s resonant transition. The AES at the 4a₁ ← O 1s resonance is interpreted as being composed of the spectator-AES of the surface H₂O, and the normal-AES of the bulk H₂O, where the 4a₁ electron is delocalized before Auger transitions. H⁺ is found to be the only ion species in AEPICO spectra measured at the 4a₁ ← O 1s resonance and at the O 1s ionization (hν = 560 eV). The electron kinetic energy dependence of the AEPICO yield (AEPICO yield spectrum) at the 4a₁ ← O 1s resonance is found to be greatly different from that at the O 1s ionization. The peak positions of the AEPICO yield spectrum at the 4a₁ ← O 1s resonance are found to correspond to those of the spectator-AES of the surface H₂O, which is extracted from the AES at the 4a₁ ← O 1s resonance. Furthermore, the AEPICO yield is greatly enhanced at the 4a₁ ← O 1s resonance as compared with that at the O 1s ionization. On the basis of these results, a spectator-Auger-stimulated ion desorption mechanism and/or ultra-fast ion desorption mechanism are concluded to be responsible for the H⁺ desorption at the 4a₁ ← O 1s resonance. The enhancement of the H⁺ yield is ascribed to the O---H anti-bonding character of the 4a₁ orbital.     

Adsorbed state and vibrational excitation of N2 on Pd(110)

High-resolution vibrational electron energy loss spectroscopy, low-energy electron diffraction and Auger electron spectroscopy have been used to study the interactions of nitrogen with the Pd(110) surface. At 120 K, N₂ is chemisorbed molecularly on the Pd(110) surface, and the (2 × 1)-N₂ structure is formed. Most probably, the N₂ molecules are chemisorbed in the on-top sites of the bulk-like Pd(110) surface in the upright-linear structure. The Pd---N₂ bond energy is estimated to be ˜ 6 kcal/mol. The Pd---N₂ and N---N stretching vibrations of N₂ admolecules on Pd(110) are observed at 30 and 278 meV, respectively. The primary-energy dependence and angle dependence of their excitation cross sections agree reasonably well with the prediction of the dipole theory. The electron beam-induced effects are briefly discussed.     

Auger electron spectroscopy and electron energy loss spectroscopy studies on carbonization of Si(100) and (111) surfaces with ethylene

The reactions of Si(100) and Si(111) surfaces at 700 °C (973 K) with ethylene (C₂H₄) at a pressure of 1.3×10⁻⁴ Pa for various periods of time were studied by using Auger electron spectroscopy (AES) and electron energy loss spectroscopy (ELS). For a C₂H₄ exposure level, the amount of C on the (111) surface was larger than that on the (100) surface. The formation of β-SiC grain was deduced by comparing the C_KLL spectra from the sample subjected to various C₂H₄ exposure levels, and from β-SiC crystal.     

Quantitative Auger electron spectroscopy analysis with co-evaporated AuCu films

A method for the quantitative Auger electron spectroscopy (AES) analysis by using a co-evaporation technique is extended to the AuCu system following the previous work. The calibration curves for lower Auger energy have peaks at 60 eV for Cu and at 69 eV for Au, and for higher Auger energy peaks at 239 eV for Au and at 920 eV for Cu. It is found that a simple linear relation does not exist in the results for AES measurements and the bulk analysis by atomic absorption spectroscopy (AAS) because of the back-scattering effect and the overlap of the spectra at lower energies in the Au-Cu system. It is also found that the adsorption of oxygen caused by electron beam bombardment has a significant influence on the AES results. The calibration curves obtained after a correction for oxygen adsorption are successfully applied to the determination of the composition at the surface of a sputtered AuCu alloy.     

Potassium adsorption on graphite(0001)

Potassium adsorption on graphite has been studied with emphasis on the two-dimensional K adlayer below one monolayer. Data are presented for the work function versus coverage, high-resolution electron energy loss spectroscopy (HREELS) vibrational spectra of K-adlayers, low energy electron diffraction and ultraviolet photoemission spectroscopy (UPS) spectra at different coverages. The data provide information regarding the vibrational properties of the K-adlayer, the metallization of the adlayer at submonolayer coverages, and the charge transfer from the K adatoms to the graphite substrate. Analysis of the work function, HREELS, and UPS data provides a qualitatively consistent picture of the charge state of the K adatoms, where at low coverages, below a critical coverage θ_c (θ_c=0.2–0.3), the K adatoms are dispersed and (partially) ionized, whereas at θ>θ_c islands of a metallic 2×2 K phase develops that coexist with the dispersed a K adatoms up to θ=1. We show that it is possible to understand the variation of the work function data based on a two-phase model without invoking a depolarization mechanism of adjacent dipoles, as is normally done for alkali-metal adsorption on metal surfaces. Similarly, the intensity variation as a function of coverage of the energy loss peak at 17 meV observed in HREELS, and the photoemission peak at E_b=0.5 eV seen in UPS can be understood from a two-phase model. A tentative explanation is presented that connects apparent discrepancies in the literature concerning the electronic structure of the K adlayer. In particular, a new assignment of the K-induced states near the Fermi level is proposed.     

Deposition and characterization of carbon nitride films from hexamethylenetetramine/N2 by microwave plasma-enhanced chemical vapor deposition

Carbon nitride thin films were deposited on Si(1 0 0) substrate by microwave plasma-enhanced chemical vapor deposition (PECVD). Hexamethylenetetramine (HMTA) was used as carbon and nitrogen source while N₂ gas was used as both nitrogen source and carrier gas. The sp³-bonded C---N structure in HMTA was considered significantly in the precursor selection. X-ray diffraction analysis indicated that the film was a mixture of crystalline - and β-C₃N₄ as well as graphitic-C₃N₄ and β-Si₃N₄ which were not easily distinguished. Raman spectroscopy also suggested the existence of - and β-C₃N₄ in the films. X-ray photoelectron spectroscopy study indicated the presence of sp²- and sp³-bonded C---N structures in the films while sp³C---N bonding structure predominated to the sp² C---N bonding structure in the bulk composition of the films. N was also found to be bound to Si atoms in the films. The product was, therefore, described as CN_x:Si, where x depends on the film depth, with some evidences of crystalline C₃N₄ formation.     

添加Fe(C5H5)2合成氢掺杂金刚石大单晶及其表征

在Ni₇₀Mn₂₅Co₅-C体系中添加含氢化合物Fe(C₅H₅)₂作为新型氢源, 利用温度梯度法, 在压力为5.5-6.0 GPa、温度为1280-1400 ℃的条件下, 成功合成出氢掺杂的宝石级金刚石大单晶. 通过傅里叶显微红外光谱发现, 随着Fe(C₅H₅)₂添加量的增加, 合成晶体中与氢相关的对应于sp³杂化C-H键的对称伸缩振动和反对称伸缩振动的红外特征峰2850和2920 cm^-1逐渐增强, 而晶体中氮含量却逐渐减少. 通过合成晶体的拉曼光谱分析发现, 金刚石的拉曼峰伴随Fe(C₅H₅)₂的添加向高频偏移, 这表明氢的进入在金刚石内部产生了压应力. 观察扫描电子显微镜图像发现, 在低含量Fe(C₅H₅)₂添加时晶体表面平滑, 而高含量添加时晶体表面缺陷增多, 且呈现出气孔状. 使用新的添加剂Fe(C₅H₅)₂作为氢源, 合成出含氢宝石级金刚石单晶, 丰富了金刚石单晶中对氢的研究内容, 也可为理解天然金刚石的形成机理提供帮助.     

富勒烯C20四聚体的结构与性能研究

采用密度泛函理论(DFT)中的杂化密度泛函(B3LYP)方法, 在6-31 G基组水平上对C₂₀四聚体进行了几何参数全优化, 得到了基态构型, 并对其稳定性、电子结构、极化率和芳香性进行了计算研究. 结果表明: C₂₀碳笼以[2+2]加成方式结合形成C₂₀四聚体, 具有良好的热力学稳定性; C原子内部以sp²的方式杂化, C原子之间有少量电荷转移; C₂₀ 四聚体的IR和Raman光谱都有较多的振动峰; 随碳笼数的增加, C₂₀聚合物中原子间的成键相互作用随之增强; C₂₀四聚体具有芳香性.     

钙钛矿(C6H5CH2NH3)2PbBr4拉曼光谱研究

运用激光拉曼光谱实验和密度泛函理论计算研究了450～1 700 cm-1光谱范围内有机-无机杂化钙钛矿材料(C₆H₅CH₂NH₃)₂PbBr₄的振动模式特性。对比实验所得拉曼光谱和理论计算所得拉曼光谱,发现密度泛函理论计算可以很好的模拟(C₆H₅CH₂NH₃)₂PbBr₄有机部分的分子振动模式。同时通过比较分析密度泛函理论计算和参考文献,对450～1 700 cm-1光谱范围内的拉曼峰的分子振动模式进行了初步的归属,并发现该光谱范围内的拉曼峰主要是由(C₆H₅CH₂NH₃)₂PbBr₄分子中有机部分振动所产生的。     

Line shape and lifetime in argon 2p electron spectroscopy

The argon 2p photoelectron spectrum and the argon L₃M₂₃M₂₃ ¹S₀ Auger spectrum have been measured at several photon energies between 6 and 80 eV above the 2p_3/2 threshold with an instrumental line width significantly smaller then the natural line width. The spectra are described well by the theory of van der Straten et al. [Z. Phys. D 8 (1988) 35] provided that allowance is made for the instrumental resolution and measurements are made at a sufficiently low pressure. The lifetime (Lorentzian) line width determined from these measurements for the core-ionized atom is 112±3 meV, in good agreement with the line width for the 2p_3/2→4s core-excited state, 114±2 meV, indicating that the 4s electron has little influence on the Auger decay rate. Remeasurement of the line width for the carbon 1s hole in carbon dioxide gives values in good agreement with the previous measurement of 99 meV.     

Study of the chemical bonding of titanium with silicon and oxygen by AES and SEELS

Auger electron Spectroscopy (AES) and slow electron energy loss Spectroscopy (SEELS) have been employed to study the electronic structure of Ti, TiSi₂ and TiO₂. The changes in the Auger and loss spectra when Ti chemically binds with silicon to form TiSi₂ and with oxygen to form TiO₂ have been understood as manifestations of changes in electronic participation. AES spectra show distinct changes in line shapes of transitions involving the Ti valence electrons. The SEELS spectra provide information regarding shallow core levels, valence band and the collective excitation energies of the volume and surface plasmons. By monitoring the changes in the Auger peak at 387 eV and the 3p→ 3d quasiatomic transition (at about 45 eV), the role of d-orbital occupancies are studied in Ti and its compounds. The SEELS studies in the 0-80 eV range have enabled the authors to observe the behaviour of the 3p → 3d quasiatomic transition in Ti, which persists after oxidation but almost disappears during TiSi₂ formation. The values of the plasmon losses are related to the collective behaviour of conduction electrons.