Compact superconducting single-and dual-band filter design using multimode stepped-impedance resonator

This study presents two multimode stepped-impedance structures to design single-and dual-band filters. Transmission zeroes are introduced for the single-band filter by using dual-mode stepped-impedance resonators. The single-band filter with high selectivity is centered at 6.02 GHz and has a fractional bandwidth(FBW) of 25.6%. Four stubs(two low frequency and two high frequency ones) are connected to the rectangular patch in the center to construct a quadruplemode resonator. The independent conditions of the center frequencies of the high and low bands of the resonator are analyzed. A dual-band filter, which operates at 1.53 GHz and 2.44 GHz with FWBs of 12.1% and 14.1%, respectively is designed. The single-and dual-band filters are both fabricated with double-sided YBCO films and they can be used in mobile and satellite communications.     

Single-/dual-band metamaterial absorber based on cross-circular-loop resonator with shorted stubs

A single-/dual-band metamaterial absorber (MMA) based on cross-circular-loop resonator (CCLR) with shorted stubs is discussed at microwave frequencies in this paper. The single-/dual-band characteristics are realized by adjusting the positions of the shorted stubs. We briefly analyze the equivalent circuit model of the MMA unit cell and then numerically and experimentally investigate the near-perfect absorptions in such two conditions (single- and dual-band). The results indicate that the proposed MMA exhibits near-perfect impedance matching with free space and high absorptivity of 99.74?% at 8.65?GHz for single-band condition, and absorptivities of 99.75?% and 97.35?% at 8.525 and 9.1?GHz, respectively, for dual-band condition. It also exhibits a wide range of angles of incidence for both transverse electric (TE) and transverse magnetic (TM) radiation. The two operating frequency bands, in dual-band condition, can be further controlled by adjusting the positions of shorted stubs or adding other shorted stubs. So it opens the way to fabricate controllable MMAs, and so controllable perfectly matched layers and bolometers.     

基于正六边形多开口的新型双频带左手材料

本文提出了基于正六边形多开口的新型双频带磁谐振体.在微波衬底材料的一面放置交错多开口的两个正六边形金属环,多开口结构破坏了环间耦合电容,从而使两环形成相对独立的两个谐振网络实现双频带效应.最后将该谐振结构的另一面放置金属导线形成一个双频带的新型左手材料.文中利用HFSS软件仿真和等效参数提取的方法,分析和验证该结构的正确性.     

超薄柔性透射型超构材料吸收器

设计并加工了一种超薄柔性透射型吸收器,总体厚度为0.288 mm,可实现柔性弯曲,容易做到与曲面目标共形.该吸收器由三层结构组成,底层是金属光栅,中间为介质层,表面单元由两条平行放置的尺寸不同的金属线组成.仿真和实验结果表明,对横电波在5和7 GHz的吸收分别达到97.5%和96.0%,对横磁波在3.0—6.5 GHz都能保持90%以上的透射率.两个吸收频点可分别独立调节,增加了设计的灵活性.另外,当入射角增大到60°时,该吸收器的性能基本不受影响,表现出良好的广角特性.     

Multifrequency super-thin cloaks

Bandwidth and thickness have become the most troublesome problems for EM cloaks. In this paper, we propose to solve the two problems using connected patches based on the microwave network model. By covering an obstacle with combined connected patches, cloaking effect can be achieved at multiple frequencies so as to expand the operating band. As an explicit example, a dual-band super-thin cloak using two different connected patch unit cells is demonstrated. Cloaking effect can be achieved at 3.50 GHz and 4.14 GHz simultaneously with an 8 dB transmission enhancement. The cloak design method provides a new route to broadening the bandwidth of thin EM cloaks.     

A High-gain Wideband Antenna with Double Fabry-perot Cavities

A high-gain wideband antenna, using the electromagnetic resonances of double Fabry-Perot (F-P) cavities, is proposed. The two cavities are excited by a patch antenna placed in the cavities on top of the ground plane. One of the double F-P cavities is formed by a ground plane and a single metallic strips array, and the other consists of the patch and the metallic strips array. The two F-P cavities have different resonance points which yield the frequency bandwidth of 7% between 13.0 and 14 GHz with S₁₁ ≤ 10 dB, meanwhile, in this frequency region high gain is also obtained. Moreover, the center frequency and bandwidth could be adjusted by changing the cavity length. The high-gain wideband antenna was manufactured and measured. The measured VSWR is less than 2 from 13.3 GHz to 15.2 GHz, the measured gain is 13.5 dB at 13.5 GHz. In addition to that, a considerable improvement of 7 dB in terms of gain is obtained when compared to the same antenna without metallic strips.     

Novel 53/106 GHz Dual-Band MMW LC Oscillator Implemented in SiGe BiCMOS Technology

In this Paper, we present a fully integrated millimeter wave LC voltage-controlled oscillator (VCO), which employs a novel topology, operating at dual-band frequency of 53.22 GHz-band and 106.44 GHz-band. The low-phase noise performance of –107.3 dBc/Hz and –106.1 dBc/Hz at the offset frequency of 600 kHz, –111.8 dBc/Hz and –110.6 dBc/Hz at the offset frequency of 1 MHz around 53.22 GHz and 106.44 GHz are achieved using IBM BiCMOS-6HP technology, respectively. Two tuning ranges, of 52.7 - 53.8 GHz and 105.4 - 107.6 GHz for the proposed LC VCO are obtained. The output voltage swing of this VCO is around 1.8 V_p-p at the operation frequency of 53.22 GHz and 0.45 V_p-p at 106.44 GHz; the total power consumption is about 16.5 mW. To our knowledge, this is the first oscillator which operates at dual-band frequency above 50 GHz with the best preformance.     

An Infrared Metamaterial Broadband Absorber Based on a Simple Titanium Disk with High Absorption and a Tunable Spectral Absorption Band

A metamaterial absorber is proposed that functions in the medium- (3–5 µm) and long-wavelength (8–12 µm) infrared (medium-wavelength infrared, MWIR, and long-wavelength infrared, LWIR, respectively) regions. The proposed design, which consists of periodic cells, can be tuned to achieve single-band or dual-band light absorption by changing the periodicity of the structure. Each cell forming the metamaterial absorber consists of a bottom metal plate (Al), a top metal disk (Ti), and an intermediate dielectric medium (Si or ZnS) in which a metal disk (Ti) is embedded. For a period of 0.85 µm, the absorber achieves broadband absorption in the LWIR region, with an average absorption of 92.1%. Further, the absorber shows acceptable tolerance to irradiation at oblique incidence. For a period of 2 µm, a peak absorption of 99.05% is achieved in the MWIR region, thereby providing dual-band absorption. Tuning the periodicity of the structure enhances the localized surface plasmon resonance, with the absorption mechanism explained by establishing an equivalent parallel LC circuit. The absorption properties demonstrated by the proposed metamaterial absorber are promising for thermal imaging and infrared spectroscopy.     

Electromagnetic coupling reduction in dual-band microstrip antenna array using ultra-compact single-negative electric metamaterials for MIMO application

In this paper, an ultra-compact single negative(SNG) electric waveguided metamaterial(WG-MTM) is first investigated and used to reduce the mutual coupling in E H planes of a dual-band microstrip antenna array. The proposed SNG electric WG-MTM unit cell is designed by etching two different symmetrical spiral lines on the ground, and has two stopbands operating at 1.86 GHz and 2.40 GHz. The circuit size is very compact, which is only λ_0/33.6 ×λ_0/15.1(where λ_0 is the wavelength at 1.86 GHz in free space). Taking advantage of the dual-stopband property of the proposed SNG electric WG-MTM, a dual-band microstrip antenna array operating at 1.86 GHz and 2.40 GHz with very low mutual coupling is designed by embedding a cross shaped array of the proposed SNG electric WG-MTM. The measured and simulated results of the designed dual-band antenna array are in good agreement with each other, indicating that the mutual coupling of the fabricated dual-band antenna array realizes 9.8/11.1 d B reductions in the H plane, 8.5/7.9 d B reductions in the E plane at1.86 GHz and 2.40 GHz, respectively. Besides, the distance of the antenna elements in the array is only 0.35 λ_0(where λ_0 is the wavelength at 1.86 GHz in free space). The proposed strategy is used for the first time to reduce the mutual coupling in E H planes of the dual-band microstrip antenna array by using ultra-compact SNG electric WG-MTM.     

Research on a middle infrared and long infrared dual-band laser

We propose a continuous-wave(CW)middle infrared(MIR)and long infrared(LIR)dual-band laser for the calibration and effect research of infrared detecting and imaging systems.A total output power of 18 W is achieved by the proposed dual-band laser through one DF gain medium module and one parallel placed CO2 gain medium module using a common stable resonator and output mirror with nominal transmissivities of ～5%in the MIR band and～10%in the LIR band.Spectra of dual-band laser are acquired.The power extracting efficiency of this dual-band laser can be significantly improved,as validated by a single-band test of optimized parameters.     

Numerical analysis of a dual-wave band guided-mode resonance filter with embedded bilayer asymmetric metallic gratings

In this paper, a novel guided-mode resonances (GMRs) based embedded dual-wavelength filter, which had the bilayer gratings located at the two sides of dielectric substrate and arranged at asymmetric position, was investigated and studied theoretically. As compared to symmetric structures that usually provided single wavelength of transmission resonance, as one normal incidence was used for transverse magnetic polarized light, the designed asymmetric structure could generate two remarkable narrow band wavelengths of transmission resonance. The parameters to affect the resonance wavelengths and the transmission resonance Q value (Q = λ/Δλ) of two bands were the distance between the two metallic gratings, the relatively lateral positions of the upper and lower gratings, the number of structure period, the thicknesses of metallic gratings, and the thickness of dielectric film. By optimizing the designed parameters, a GMR device with two resonance wavelengths located at 1239 and 1302 nm showed relative optimal performance because they had high transmission depth (99.9% and 90%) and ultra-narrow transmission bandwidth (2.8 and 1.8 nm) at the two resonance wavelengths. The presented structure can offer a potential route towards dual-band narrow-band filters and refractive index sensors in the near infrared.     

Dual-function terahertz metasurface based on vanadium dioxide and graphene

A dual-function terahertz metasurface based on VO₂ and graphene is proposed in this paper. It consists of a gold layer embedded with VO₂ patches, a SiO₂ spacer layer, a VO₂ layer, graphene and a SiO₂ spacer substrate. When the bottom VO₂ layer is in the metallic state, the designed metasurface can achieve absorption. When the top VO₂ patches are in the metallic state, the proposed metasurface can be used as a single-band absorber with terahertz absorptance of 99.7% at 0.736 THz. When the top VO₂ patches are in the insulating state, the designed structure behaves as a dual-band absorber with an absorptance of 98.9% at 0.894 THz and 99.9% at 1.408 THz. In addition, the absorber is polarization insensitive and keeps good performance at large angles of incidence. When the bottom VO₂ is in an insulating state, the metasurface shows electromagnetically induced transparency. The transparent window can be dynamically regulated by controlling the chemical potential of graphene. The proposed metasurface exhibits the advantages of terahertz absorption, electromagnetically induced transparency and dynamic control, which provides more options for the design of terahertz devices in the future.     

Multi-band terahertz two-handed metamaterial based on the combined ring and cross pairs

We present the design of a Multiband two-handed metamaterial (MM) with the composite structure combined ring and cross pairs (RP + CP) in the terahertz regime. The dual-band left-handed and single-band right-handed transmission properties of this composite structure were explored by the FDTD method. The MM exhibits left-handed and right-handed transmission pass bands around the frequencies of 0.43 THz, 1.32 THz and 0.85 THz for the terahertz electromagnetic (EM) wave normal incidence, respectively. The surface currents distributions are demonstrated to discuss the physical mechanism of the left-handed properties of the proposed MM. The retrieved equivalent EM parameters and the refraction phenomenon based on a wedge-shaped model verify the left-handed properties. Furthermore, the dual-band left-handed transmission properties of RP + CP structure can be tunable individually by changing the structural parameters. The presented design of terahertz two-handed MM offers a flexibility for investigation of their novel EM properties, and important terahertz device applications.     

A dual-band polarization insensitive metamaterial absorber with split ring resonator

A dual-band polarization insensitive absorber has been proposed . Unlike the previous dual band absorber composed of composite structures, only one square metal ring with a slit at the middle of each side can be used to achieve the dual-band absorption. The calculated results show two distinct absorption peaks of 0.96 at 10 GHz and 0.99 at 20 GHz. In addition, the positions of the two peaks are strongly influenced by the width of the slit (g). More importantly, the absorptions of the two peaks keep higher than 0.9 while g changing. The dual-band absorber may have many potential applications in scientific and technological areas because of its excellent absorption characteristics and concise structure.     

The primary design of advanced ground-based atmospheric microwave sounder and retrieval of physical parameters

This paper introduces a prototype of ground-based atmospheric microwave sounder that operates in K-band from 22 to 31 GHz and V-band from 51 to 59 GHz. Different from the MP3000A and RPG, the sounder adopts independent dual-band reflectors instead of sharing a dual-band reflector. The direct detect type receiver is applied, which is of smaller size, higher sensitivity, efficient data observing and lower nonlinear error than the widely used superheterodyne receiver. The observing brightness temperatures from this prototype agree well with the simulated brightness temperatures according to the ground-based radiative transfer theory. We use the artificial neural network (ANN) algorithm to retrieve temperature profiles, which has higher spatial resolution especially in the capping inversion when compared with the linear regression algorithm. The temperature retrievals are comparable with the retrievals from RPG and MP3000A retrieval models and have a smaller bias in some certain regions.     

基于高阻抗表面的多频带Salisbury屏设计

为进一步提高传统Salisbury屏的吸波性能, 本文提出了利用高阻抗表面在特定频率同相反射的特性, 替代原有结构中的金属平板设计多频带Salisbury屏的方法. 通过分析不同频率电磁波经高阻抗表面反射后空间电磁场的场强分布, 说明可以通过共用Salisbury屏的损耗层, 在高阻抗表面同相反射的特征频率附近引入新的吸收带. 以不同尺寸方形周期结构的单频和双频高阻抗表面为例, 从仿真和实验两个方面验证了多频带Salisbury屏设计的可行性, 且实验和仿真结果十分符合. 结果表明, 多频带Salisbury屏基本保留了原有的吸波性能, 同时又引入了新的吸收峰, 吸收峰的位置和数量与高阻抗表面同相反射的频带位置和数目有关. 与传统的Salisbury屏相比, 在材料增加厚度不足1 mm 的情况下, 多频带Salisbury屏的设计使反射率小于-10 dB的吸波带宽由8.5 GHz增加到10.1 GHz, 且实现了向长波方向的拓展, 最低频率由7.5 GHz拓展到5.98 GHz.     

基于发卡式开口谐振环的柔性双频带超材料

本文设计了一种基于开口谐振环(split ring resonator, SRR)混合排列单元格的小型化双频带超材料(metamaterial, MM). 该MM的单元结构为发卡式SRR, 所设计的双频带MM可以应用于无线局域网(2.4 GHz) 和全球微波互联接入(3.5GHz)系统. 并且, 采用柔性介质作为基板增加了MM的柔韧度和普适性, 实验和测试结果表明: 双频带MM的中心频率可以通过调节SRR的尺寸进行控制. 此外, 本文也对MM在不同入射角的情况进行了分析, 结果表明MM对入射角度不敏感.最后, 通过MM的表面电流分布情况研究, 进一步解释了其双频带谐振频率的产生原理.     

A wide band left handed material with high transmission

In this study, we propose guidelines to optimize the transmission and bandwidth of left handed materials (LHM) composed of two-dimensional lattice of metallic wires interleaved with double split ring resonators (SRRs). Several LHM structures are fabricated to test the proposed rules of design and operate between 7 and 14 GHz. In a first step, we show that adding extra SRR layers within each period of wire layers (i.e. interleaving the wire lattice with several SRR lattices) increases the transmittance of the material. In a second step, we demonstrate that adding extra SRR layers in a non-equidistant manner (i.e. inserting several SRR lattices shifted one another by different distances) widens the LHM frequency bandwidth. The results of experimental characterization are found to be in excellent agreement with theoretical predictions. A LHM behavior is obtained in a wide frequency band of 1 GHz around 8.2 GHz with a transmission of −1.2 dB measured at resonance. The negative refraction of the material is verified from measurements at oblique incidence.     

基于black phosphorus纳米棒耦合的等离激元诱导透明

提出了基于black phosphorus(BP)纳米棒耦合的多频段等离激元诱导透明(PIT)电磁模型,通过FDTD和辐射双振荡器(RTO)模型从数值计算和理论研究两方面分析了模型的电磁特性.结果表明:由于不同长度的BP纳米棒之间的明-明耦合,可以在实现单频段PIT效应的基础之上,进一步产生双频段和三频段的PIT效应.其次,通过改变BP的弛豫速率ns,可以在单频段、双频段、三频段PIT模型中同时实现透明窗谐振频率的可调性.当ns增大时,各频段PIT窗口的谐振频率将会逐渐增大,发生蓝移.进一步研究了单频段PIT模型的传感特性,该模型随背景材料折射率变化的灵敏度(sensitivity)达到了6110.6 (nm/RIU),优值系数(FOM)达到了7.39 (1/RIU)这为多频带滤波、超灵敏传感器的设计提供了理论参考.     

Dual-Band Bi-Directional Pattern Reconfigurable Fractal Patch Antenna for Millimeter Wave Application

A novel dual-band bi-directional reconfigurable antenna based on Koch patch is presented in this paper. By controlling the switches in the slots etched on the Koch patch, different far field bi-directional patterns at the dual-band around 60 GHz/80 GHz could be achieved. And full azimuthal coverage at this dual-band is possible by electronically controlling the switches in the slots of the patch. This work was supported by the National Natural Science Foundation of China (No. 60371008, No. 90505001) and the CRT Program of UESTC.