Efficient and Selective Carboligation with Whole‐Cell Biocatalysts in Pickering Emulsion

Pickering emulsions (PEs) are particle‐stabilized multiphase systems with promising features for synthetic applications. Described here is a novel, simplified set‐up employing catalytically active whole cells for simultaneous emulsion stabilization and synthetic reaction. In the stereoselective carboligation of benzaldehyde to (R)‐benzoin catalyzed by a benzaldehyde lyase in E. coli, the set‐up yielded maximum substrate conversion within very short time, while economizing material demand and waste. Formation and activity of freshly produced PEs were enhanced when the catalytic whole cells were covered with hydrophobic silicone prior to PE formation. Benchmarked against other easy‐to‐handle whole‐cell biocatalysts in pure organic solvent, neat substrate, an aqueous emulsion in substrate, and a micro‐aquatic system, respectively, the cell‐stabilized PE outperformed all other systems by far.     

High‐Internal‐Phase Pickering Emulsions Stabilized Solely by Peanut‐Protein‐Isolate Microgel Particles with Multiple Potential Applications

High‐internal‐phase Pickering emulsions have various applications in materials science. However, the biocompatibility and biodegradability of inorganic or synthetic stabilizers limit their applications. Herein, we describe high‐internal‐phase Pickering emulsions with 87 % edible oil or 88 % n‐hexane in water stabilized by peanut‐protein‐isolate microgel particles. These dispersed phase fractions are the highest in all known food‐grade Pickering emulsions. The protein‐based microgel particles are in different aggregate states depending on the pH value. The emulsions can be utilized for multiple potential applications simply by changing the internal‐phase composition. A substitute for partially hydrogenated vegetable oils is obtained when the internal phase is an edible oil. If the internal phase is n‐hexane, the emulsion can be used as a template to produce porous materials, which are advantageous for tissue engineering.     

C‐Glycosyl Amino Acids through Hydroboration–Cross‐Coupling of exo‐Glycals and Their Application in Automated Solid‐Phase Synthesis

O‐Glycosylation is one of the most important post‐translational modifications of proteins. The attachment of carbohydrates to the peptide backbone influences the conformation as well as the solubility of the conjugates and can even be essential for binding to specific ligands in cell–cell interactions or for active transport over membranes. This makes glycopeptides an interesting class of compounds for medical applications. To enhance the long‐term availability of these molecules in vivo, the stabilization of the glycosidic bond between the amino acid residue and the carbohydrate is of interest. The described modular approach affords β‐linked C‐glycosyl amino acids by a sequence of Petasis olefination of glyconolactones, stereoselective hydroboration and a mild B‐alkyl‐Suzuki coupling reaction. The coupling products were transformed to C‐glycosyl amino acid building‐blocks suitable for solid‐phase synthesis and successfully incorporated into a partial sequence of the tumor‐associated MUC1‐glycopeptide. The resulting C‐glycopeptides are candidates for the development of long‐term stable mimics of O‐glycopeptide vaccines.     

Hydrophilic polymer foams with well‐defined open‐cell structure prepared from pickering high internal phase emulsions

Open‐cell hydrophilic polymer foams are prepared through oil‐in‐water Pickering high internal phase emulsions (HIPEs). The Pickering HIPEs are stabilized by commercial titania (TiO₂) nanoparticles with adding small amounts of non‐ionic surfactant Tween85. The morphologies, such as average void diameter and interconnectivity, of the foams can be tailored easily by varying the TiO₂ nanoparticles and Tween85 concentrations. Further, investigation of the HIPE stability, emulsion structure and the location of TiO₂ nanoparticles in resulting foams shows that the surfactant tends to occupy the oil‐water interface at the contact point of adjacent droplets, where the interconnecting pores are hence likely to be formed after the consolidation of the continuous phase. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of millimeter‐sized hydrogel beads by inverse Pickering polymerization using starch‐based nanoparticles as emulsifier

The preparation of millimeter‐sized poly(acrylamide‐co‐acrylic acid) hydrogel beads via inverse Pickering emulsion polymerization using starch‐based nanoparticles (SNPs) as stabilizers is reported. Amphiphilic starch is fabricated by the introduction of butyl glycidyl ether groups and palmitate groups, and the hydrophobically modified SNPs are fabricated by a nanoprecipitation process. The obtained SNPs could adsorb at oil‐water interfaces to stabilize an inverse Pickering emulsion, and the effects of oil/water volume fraction ratio and SNP concentration on emulsions are comprehensively studied. Poly(acrylamide‐co‐acrylic acid) hydrogel beads with a size of approximately 1 mm are obtained by inverse Pickering emulsion polymerization stabilized by SNPs. The morphology and structure of hydrogel beads are extensively investigated, which confirms that SNPs locate on the surface of hydrogel beads and act as emulsifiers and network structures present inside the beads. Polymerization is also detected to investigate the potential formation mechanism of hydrogel beads. The pH‐responsive property of hydrogel beads and its potential application for drug delivery are also explored.     

Two‐Dimensional Noble‐Metal Chalcogenides and Phosphochalcogenides

Noble‐metal chalcogenides, dichalcogenides, and phosphochalcogenides are an emerging class of two‐dimensional materials. Quantum confinement (number of layers) and defect engineering enables their properties to be tuned over a broad range, including metal‐to‐semiconductor transitions, magnetic ordering, and topological surface states. They possess various polytypes, often of similar formation energy, which can be accessed by selective synthesis approaches. They excel in mechanical, optical, and chemical sensing applications, and feature long‐term air and moisture stability. In this Minireview, we summarize the recent progress in the field of noble‐metal chalcogenides and phosphochalcogenides and highlight the structural complexity and its impact on applications.     

Synthesis of all‐conjugated poly(3‐hexylthiophene)‐block‐ poly(3‐(4′‐(3″,7″‐dimethyloctyloxy)‐3′‐pyridinyl)thiophene) and its blend for photovoltaic applications

New all‐conjugated block copolythiophene, poly(3‐hexylthiophene)‐block‐poly(3‐(4′‐(3″,7″‐dimethyloctyloxy)‐3′‐pyridinyl)thiophene) (P3HT‐b‐P3PyT) was successfully prepared by Grignard metathesis polymerization. The supramolecular interaction between [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) and P3PyT was proposed to control the aggregated size of PCBM and long‐term thermal stability of the photovoltaic cell, as evidenced by differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and optical microscopy. The effect of different solvents on the electronic and optoelectronic properties was studied, including chloroform (CL), dichlorobenzene (DCB), and mixed solvent of CL/DCB. The optimized bulk heterojunction solar cell devices using the P3HT‐b‐P3PyT/PCBM blend showed a power conversion efficiency of 2.12%, comparable to that of P3HT/PCBM device despite the fact that former had a lower crystallinity or absorption coefficient. Furthermore, P3HT‐b‐P3PyT could be also used as a surfactant to enhance the long‐term thermal stability of P3HT/PCBM‐based solar cells by limiting the aggregated size of PCBM. This study represents a new supramolecular approach to design all‐conjugated block copolymers for high‐performance photovoltaic devices. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Gram‐Scale Synthesis of Chiral Cyclopropane‐Containing Drugs and Drug Precursors with Engineered Myoglobin Catalysts Featuring Complementary Stereoselectivity

Engineered hemoproteins have recently emerged as promising systems for promoting asymmetric cyclopropanations, but variants featuring predictable, complementary stereoselectivity in these reactions have remained elusive. In this study, a rationally driven strategy was implemented and applied to engineer myoglobin variants capable of providing access to 1‐carboxy‐2‐aryl‐cyclopropanes with high trans‐(1R,2R) selectivity and catalytic activity. The stereoselectivity of these cyclopropanation biocatalysts complements that of trans‐(1S,2S)‐selective variants developed here and previously. In combination with whole‐cell biotransformations, these stereocomplementary biocatalysts enabled the multigram synthesis of the chiral cyclopropane core of four drugs (Tranylcypromine, Tasimelteon, Ticagrelor, and a TRPV1 inhibitor) in high yield and with excellent diastereo‐ and enantioselectivity (98–99.9% de; 96–99.9% ee). These biocatalytic strategies outperform currently available methods to produce these drugs.     

Multimetal‐Substituted Epsilon‐Iron Oxide ϵ‐Ga0.31Ti0.05Co0.05Fe1.59O3 for Next‐Generation Magnetic Recording Tape in the Big‐Data Era

From the viewpoints of large capacity, long‐term guarantee, and low cost, interest in magnetic recording tapes has undergone a revival as an archive storage media for big data. Herein, we prepared a new series of metal‐substituted ?‐Fe₂O₃, ?‐Ga^III_0.31Ti^IV_0.05Co^II_0.05Fe^III_1.59O₃, nanoparticles with an average size of 18 nm. Ga, Ti, and Co cations tune the magnetic properties of ?‐Fe₂O₃ to the specifications demanded for a magnetic recording tape. The coercive field was tuned to 2.7 kOe by introduction of single‐ion anisotropy on Co^II (S=3/2) along the c‐axis. The saturation magnetization was increased by 44 % with Ga^III (S=0) and Ti^IV (S=0) substitution through the enhancement of positive sublattice magnetizations. The magnetic tape media was fabricated using an actual production line and showed a very sharp signal response and a remarkably high signal‐to‐noise ratio compared to the currently used magnetic tape.     

Preparation of l‐phenylalanine‐imprinted solid‐phase extraction sorbent by Pickering emulsion polymerization and the selective enrichment of l‐phenylalanine from human urine

A novel l‐ phenylalanine molecularly imprinted solid‐phase extraction sorbent was synthesized by the combination of Pickering emulsion polymerization and ion‐pair dummy template imprinting. Compared to other polymerization methods, the molecularly imprinted polymers thus prepared exhibit a high specific surface, large pore diameter, and appropriate particle size. The key parameters for solid‐phase extraction were optimized, and the result indicated that the molecularly imprinted polymer thus prepared exhibits a good recovery of 98.9% for l‐ phenylalanine. Under the optimized conditions of the procedure, an analytical method for l‐ phenylalanine was well established. By comparing the performance of the molecularly imprinted polymer and a commercial reverse‐phase silica gel, the obtained molecularly imprinted polymer as an solid‐phase extraction sorbent is more suitable, exhibiting high precision (relative standard deviation 3.2%, n = 4) and a low limit of detection (60.0 ± 1.9 nmol·L^?1) for the isolation of l‐ phenylalanine. Based on these results, the combination of the Pickering emulsion polymerization and ion‐pair dummy template imprinting is effective for preparing selective solid‐phase extraction sorbents for the separation of amino acids and organic acids from complex biological samples.     

A FRET Probe for Cell‐Based Imaging of Ganglioside‐Processing Enzyme Activity and High‐Throughput Screening

Gangliosides are important signaling molecules in the cell membrane and are processed by several enzymes. Deficiencies in these enzymes can cause human lysosomal storage diseases. Building an understanding of the pathways of glycosphingolipid catabolism requires methods for the analysis of these enzymatic activities A GM3‐derived FRET probe was synthesized chemoenzymatically for the detection and quantitation of a range of ganglioside‐degrading enzymes, both in cell lysates and in living cells. This is the first substrate that enables the ratiometric fluorogenic assay of sphingolipid ceramide N‐deacylase and endoglycoceramidase and can detect and localize neuraminidase activity in living cells. It is therefore a valuable tool for building a better understanding of membrane‐confined enzymology. It also enables the robust and reliable assay of ganglioside‐degrading enzymes in a microtiter plate, thus opening the door to screening for novel or engineered biocatalysts or for new inhibitors.     

Synthesis of Dual‐Stimuli‐Responsive Microcontainers with Two Payloads in Different Storage Spaces for Preprogrammable Release

Stimuli‐responsive microcontainers have become a major topic of interest, from fundamental aspects to applications in materials science. However, microcontainers that enable the loading of multiple species and programmable release are mostly unexplored. Herein, we describe the design and synthesis of a dual‐responsive organic/inorganic hybrid microcontainer with two payloads in separate storage spaces that is formed by the rapid UV‐initiated polymerization of Pickering emulsions. The stellate mesopore silica nanoparticles with poly(N ‐isopropylacrylamide) grafted inside the mesopores were loaded with one compound (Nile red) and used as Pickering emulsifiers to stabilize oil‐in‐water droplets. Upon UV irradiation, pH‐responsive monomers were polymerized in the presence of 5(6)‐carboxyfluorescein diacetate (CFDA) to form hybrid colloidal microcontainers. The release of Nile red and CFDA could be selectively activated by changing the temperature or pH value.     

Polymer‐Based Surfaces Designed to Reduce Biofilm Formation: From Antimicrobial Polymers to Strategies for Long‐Term Applications

Contact‐active antimicrobial polymer surfaces bear cationic charges and kill or deactivate bacteria by interaction with the negatively charged parts of their cell envelope (lipopolysaccharides, peptidoglycan, and membrane lipids). The exact mechanism of this interaction is still under debate. While cationic antimicrobial polymer surfaces can be very useful for short‐term applications, they lose their activity once they are contaminated by a sufficiently thick layer of adhering biomolecules or bacterial cell debris. This layer shields incoming bacteria from the antimicrobially active cationic surface moieties. Besides discussing antimicrobial surfaces, this feature article focuses on recent strategies that were developed to overcome the contamination problem. This includes bifunctional materials with simultaneously presented antimicrobial and protein‐repellent moieties; polymer surfaces that can be switched from an antimicrobial, cell‐attractive to a cell‐repellent state; polymer surfaces that can be regenerated by enzyme action; degradable antimicrobial polymers; and antimicrobial polymer surfaces with removable top layers.     

Artificial Light‐Harvesting Complexes Enable Rieske Oxygenase Catalyzed Hydroxylations in Non‐Photosynthetic cells

In this study, we coupled a well‐established whole‐cell system based on E. coli via light‐harvesting complexes to Rieske oxygenase (RO)‐catalyzed hydroxylations in vivo. Although these enzymes represent very promising biocatalysts, their practical applicability is hampered by their dependency on NAD(P)H as well as their multicomponent nature and intrinsic instability in cell‐free systems. In order to explore the boundaries of E. coli as chassis for artificial photosynthesis, and due to the reported instability of ROs, we used these challenging enzymes as a model system. The light‐driven approach relies on light‐harvesting complexes such as eosin Y, 5(6)‐carboxyeosin, and rose bengal and sacrificial electron donors (EDTA, MOPS, and MES) that were easily taken up by the cells. The obtained product formations of up to 1.3 g L^?1 and rates of up to 1.6 mm h^?1 demonstrate that this is a comparable approach to typical whole‐cell transformations in E. coli. The applicability of this photocatalytic synthesis has been demonstrated and represents the first example of a photoinduced RO system.     

Interaction of bacteria and ion‐exchange particles and its potential in separation for matrix‐assisted laser desorption/ionization mass spectrometric identification of bacteria in water

Identification of microbial contaminants in drinking water is a challenge to matrix‐assisted laser desorption/ionization mass spectrometry (MALDI‐MS) due to low levels of microorganisms in fresh water. To avoid the time‐consuming culture step of obtaining enough microbial cells for subsequent MALDI‐MS analysis, a combination of membrane filtration and nanoparticles‐ or microparticles‐based magnetic separation is a fast and efficient approach. In this work, the interaction of bacteria and fluidMAG‐PAA, a cation‐exchange superparamagnetic nanomaterial, was investigated by MALDI‐MS analysis and transmission electron microscopy. FluidMAG‐PAA selectively captured cells of Salmonella, Bacillus, Enterococcus and Staphylococcus aureus. This capture was attributed to the aggregation of negatively charged nanoparticles on bacterial cell regional surfaces that bear positive charges. Three types of non‐porous silica‐encapsulated anion‐exchange magnetic microparticles (SiMAG‐Q, SiMAG‐PEI, SiMAG‐DEAE) were capable of concentrating a variety of bacteria, and were compared with silica‐free, smaller fluidMAG particles. Salmonella, Escherichia coli, Enterococcus and other bacteria spiked in aqueous solutions, tap water and reservoir water were separated and concentrated by membrane filtration and magnetic separation based on these ion‐exchange magnetic materials, and then characterized by whole cell MALDI‐MS. By comparing with the mass spectra of the isolates and pure cells, bacteria in fresh water can be rapidly detected at 1 × 10³ colony‐forming units (cfu)/mL. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and Microtubule‐Destabilizing Activity of N‐Cyclopropyl‐4‐((3,4‐dihydroquinolin‐1(2H)‐yl)sulfonyl)benzamide and its Analogs

While clinically useful, microtubule‐targeting agents are limited by factors that include their susceptibility to multidrug resistance. A series of aryl sulfonamides, terminally substituted with an amide or carboxylic acid, was synthesized and assayed for biological activity in two human cancer cell lines. The resulting antiproliferative activity data demonstrated that an amide was superior to a carboxylic acid in the para position. The most potent compound ( 3 ) had an IC₅₀ for growth inhibition in the low micromolar range, caused cells to accumulate in G₂M of the cell cycle, and led to depolymerization of microtubules. It was also not susceptible to the P‐glycoprotein drug efflux pump that underpins the resistance of cells to long‐term drug treatment schedules.     

Fluorescent PEGulated Oligourethane Nanoparticles for Long‐Term Cellular Tracing

We have introduced a new ABA‐type amphiphilic block copolymer consisting of functional oligourethane hydrophobic blocks and two polyethylene glycol (PEG) hydrophilic blocks. The polymer was synthesized in a single step by step‐growth polymerization between two monomers, namely tetraphenylethylene (TPE)‐diol and hexamehylene di‐isocyanate in the presence of a monofunctional impurity PEG‐2000. The polymer exhibits facile self‐assembly in water by synergistic effects of H‐bonding and π–π interaction among the oligourethane core, leading to the formation of robust nanoparticles with remarkable aggregation‐induced emission (AIE). These nanoparticles show very low critical aggregation concentration, stability over a large pH window, and excellent biocompatibility as revealed by an MTT assay. Cellular imaging with cancer cells showed facile cellular uptake and, more importantly, retention of AIE in cellular milieu for long times, which was successfully utilized for long‐term cancer cell tracking.     

Modulation of Higher‐order Behaviour in Model Protocell Communities by Artificial Phagocytosis

Collective behaviour in mixed populations of synthetic protocells is an unexplored area of bottom‐up synthetic biology. The dynamics of a model protocell community is exploited to modulate the function and higher‐order behaviour of mixed populations of bioinorganic protocells in response to a process of artificial phagocytosis. Enzyme‐loaded silica colloidosomes are spontaneously engulfed by magnetic Pickering emulsion (MPE) droplets containing complementary enzyme substrates to initiate a range of processes within the host/guest protocells. Specifically, catalase, lipase, or alkaline phosphatase‐filled colloidosomes are used to trigger phagocytosis‐induced buoyancy, membrane reconstruction, or hydrogelation, respectively, within the MPE droplets. The results highlight the potential for exploiting surface‐contact interactions between different membrane‐bounded droplets to transfer and co‐locate discrete chemical packages (artificial organelles) in communities of synthetic protocells.     

Gp91phox‐derived Reactive Oxygen Species/Urocortin 2/Corticotropin‐releasing Hormone Receptor Type 2 Play an Important Role in Long‐term Ultraviolet A Eye Irradiation‐induced Photoaging

Photoaging is induced by long‐term ultraviolet A (UVA) eye irradiation. However, the mechanism of skin damage due to UVA eye irradiation is still not well understood. In this study, we used C57BL/6j and gp91phox knockout (gp91phox^?/?) mice for the long‐term effects of UVA irradiation. The eye or dorsal skin of the mice was locally exposed to UVA for 12 months. The reactive oxygen species (ROS), gp91phox, corticotropin‐releasing hormone (CRH), urocortin 2, and CRH receptor (CRHR) type 1 and type 2 levels in the brain and mast cell tryptase and histamine levels in the dorsal skin all increased after UVA irradiation. The levels of CRH, urocortin 2, CRHR type 1 and type 2 in the brain also increased more after UVA eye irradiation than after UVA skin irradiation. Moreover, photoaging of the UVA eye irradiation mice was not induced following the administration of a ROS inhibitor in the brain. In addition, in gp91phox^?/? mice, photoaging by UVA eye irradiation was not induced. These results indicate that long‐term UVA eye irradiation led to increased gp91phox‐derived ROS in the brain and the increased expression of urocortin 2 and CRHR type 2, resulting in photoaging; however, further studies are needed to confirm these findings.     

Yttrium‐86 Is a Positron Emitting Surrogate of Gadolinium for Noninvasive Quantification of Whole‐Body Distribution of Gadolinium‐Based Contrast Agents

Gadolinium‐based contrast agents (GBCAs) are used to provide diagnostic information in clinical magnetic resonance (MR) examinations. Gadolinium (Gd) has been detected in the brain, bone and skin of patients, months and years following GBCA administration, raising concerns about long term toxicity. Despite increased scrutiny, the concentration, chemical form and fate of the retained gadolinium species remain unknown. Importantly, the whole body biodistribution and organ clearance of GBCAs is poorly understood in humans. Gadolinium lacks suitable isotopes for nuclear imaging. We demonstrate that the yttrium‐86 isotope can be used as a gadolinium surrogate. We show that Gd and their analogous Y complexes have similar properties both in solution and in vivo, and that yttrium‐86 PET can be used to track the biodistribution of GBCAs over a two‐day period.