Synthesis and Properties of Semiconducting Bispyrrolothiophenes for Organic Field‐Effect Transistors

A series of new highly soluble bispyrrolothiophenes were synthesized from vinyl azides by using transition‐metal‐catalyzed C?H‐bond functionalization. In addition to modifying the substituents present on the end‐pyrrolothiophene moieties, the arene linker in between the two units was also varied. The solution‐state properties and field‐effect‐transistor (FET) electrical behavior of these bispyrrolothiophenes was compared. Our investigations identified that the optical properties and oxidation potential of our compounds were dominated by the pyrrolothiophene unit with a λ_max value of approximately 400 nm and oxidation at approximately 1 V. FET devices constructed with thin films of these bispyrrolothiophenes were also fabricated by means of thin‐film solution processing. One of these compounds, a bispyrrolothiophene linked with benzothiodiazole, exhibits a mobility of approximately 0.3 cm² V^?1 s^?1 and the I_on/I_off value is greater than 10⁶.     

Isolation and Characterization of Four Phosphorus Cluster Anions P73–, P144–, P162– and P264– from the Nucleophilic Functionalization of White Phosphorus with 1,4‐Dilithio‐1,3‐butadienes

Studies on the aggregation degrees of negatively charged phosphides derived from the nucleophilic P₄ functionalization could help understand the pathway of phosphorus atoms degradation or aggregation. In this report, we have isolated and characterized four phosphorus cluster anions (P₇^3–, P₁₄^4–, P₁₆^2–, and P₂₆^4–) from the nucleophilic functionalization of P₄ with 1,4‐dilithio‐1,3‐butadienes. These phosphorus clusters could be rationalized as the P‐atom‐containing products besides the main phospholyl lithium. Their structural features and ³¹P NMR behaviors are discussed based on single crystal X‐ray diffraction analysis and ³¹P{¹H} COSY NMR analysis.     

Photoredox‐Coupled F‐Nucleophilic Addition: Allylation of gem‐Difluoroalkenes

A novel strategy for the expedient construction of CF₃‐embeded tertiary/quarternary carbon centers was developed by taking advantage of photoredox catalysis. Thanks to a key step of single‐electron oxidation, electron‐rich gem‐difluoroalkenes, which otherwise are essentially reluctant towards F‐nucleoplilic addition, now readily participate in this fluoroallylation reaction. Furthermore, this strategy provides an elegant example for the generation, as well as functionalization, of α‐CF₃‐substituted benzylic radical intermediates using cheap and readily available starting materials.     

Copper‐Catalyzed Benzylic C—H Functionalization,Oxidation and Cyclization of Methylarenes: Direct Access to 2‐Arylbenzothiazoles

The direct C—H functionalization of methylarenes is of great significance. Herein, a copper‐catalyzed oxidative C—N/C—S bond formation through benzylic C(sp³)—H functionalization, oxidation and cyclization of methylarenes is reported. Various 2‐arylbenzothiazoles have been synthesized in moderate to excellent yields with readily available o‐iodoaniline, potassium sulfide, and methylarenes as raw materials.     

Redox Non‐Innocence and Isomer‐Specific Oxidative Functionalization of Ruthenium‐Coordinated β‐Ketoiminate

This article deals with isomeric ruthenium complexes [Ru^III(L^R)₂(acac)] (S=1/2) involving unsymmetric β‐ketoiminates (AcNac) (L^R=R‐AcNac, R=H ( 1 ), Cl ( 2 ), OMe ( 3 ); acac=acetylacetonate) [R=para‐substituents (H, Cl, OMe) of N‐bearing aryl group]. The isomeric identities of the complexes, cct (cis‐cis‐trans, blue, a ), ctc (cis‐trans‐cis, green, b ) and ccc (cis‐cis‐cis_, pink, c ) with respect to oxygen (acac), oxygen (L) and nitrogen (L) donors, respectively, were authenticated by their single‐crystal X‐ray structures and spectroscopic/electrochemical features. One‐electron reversible oxidation and reduction processes of 1 – 3 led to the electronic formulations of [Ru^III(L)(L ^? )(acac)]⁺ and [Ru^II(L)₂(acac)]^? for 1 ⁺‐ 3 ⁺ (S=1) and 1^? – 3^? (S=0), respectively. The triplet state of 1 ⁺‐ 3 ⁺ was corroborated by its forbidden weak half‐field signal near g≈4.0 at 4 K, revealing the non‐innocent feature of L. Interestingly, among the three isomeric forms ( a – c in 1 – 3 ), the ctc ( b in 2 b or 3 b ) isomer selectively underwent oxidative functionalization at the central β‐carbon (C?H→C=O) of one of the L ligands in air, leading to the formation of diamagnetic [Ru^II(L)(L ′ )(acac)] (L ′ =diketoimine) in 4 / 4′ . Mechanistic aspects of the oxygenation process of AcNac in 2 b were also explored via kinetic and theoretical studies.     

Transition‐Metal‐Free Deconstructive Lactamization of Piperidines

One of the major challenges in organic synthesis is the activation or deconstructive functionalization of unreactive C(sp³)–C(sp³) bonds, which requires using transition or precious metal catalysts. We present here an alternative: the deconstructive lactamization of piperidines without using transition metal catalysts. To this end, we use 3‐alkoxyamino‐2‐piperidones, which were prepared from piperidines through a dual C(sp³)–H oxidation, as transitory intermediates. Experimental and theoretical studies confirm that this unprecedented lactamization occurs in a tandem manner involving an oxidative deamination of 3‐alkoxyamino‐2‐piperidones to 3‐keto‐2‐piperidones, followed by a regioselective Baeyer–Villiger oxidation to give N‐carboxyanhydride intermediates, which finally undergo a spontaneous and concerted decarboxylative intramolecular translactamization.     

Supramolecular Recognition Allows Remote,Site‐Selective C−H Oxidation of Methylenic Sites in Linear Amines

Site‐selective C−H functionalization of aliphatic alkyl chains is a longstanding challenge in oxidation catalysis, given the comparable relative reactivity of the different methylenes. A supramolecular, bioinspired approach is described to address this challenge. A Mn complex able to catalyze C(sp³)‐H hydroxylation with H₂O₂ is equipped with 18‐benzocrown‐6 ether receptors that bind ammonium substrates via hydrogen bonding. Reversible pre‐association of protonated primary aliphatic amines with the crown ether selectively exposes remote positions (C8 and C9) to the oxidizing unit, resulting in a site‐selective oxidation. Remarkably, such control of selectivity retains its efficiency for a whole series of linear amines, overriding the intrinsic reactivity of C−H bonds, no matter the chain length.     

Supramolecular Recognition Allows Remote,Site‐Selective C−H Oxidation of Methylenic Sites in Linear Amines

Site‐selective C−H functionalization of aliphatic alkyl chains is a longstanding challenge in oxidation catalysis, given the comparable relative reactivity of the different methylenes. A supramolecular, bioinspired approach is described to address this challenge. A Mn complex able to catalyze C(sp³)‐H hydroxylation with H₂O₂ is equipped with 18‐benzocrown‐6 ether receptors that bind ammonium substrates via hydrogen bonding. Reversible pre‐association of protonated primary aliphatic amines with the crown ether selectively exposes remote positions (C8 and C9) to the oxidizing unit, resulting in a site‐selective oxidation. Remarkably, such control of selectivity retains its efficiency for a whole series of linear amines, overriding the intrinsic reactivity of C−H bonds, no matter the chain length.     

Ruthenium‐Catalyzed Cascade CH Functionalization of Phenylacetophenones

Three orthogonal cascade C? H functionalization processes are described, based on ruthenium‐catalyzed C? H alkenylation. 1‐Indanones, indeno indenes, and indeno furanones were accessed through cascade pathways by using arylacetophenones as substrates under conditions of catalytic [{Ru(p‐cymene)Cl₂}₂] and stoichiometric Cu(OAc)₂. Each transformation uses C? H functionalization methods to form C? C bonds sequentially, with the indeno furanone synthesis featuring a C? O bond formation as the terminating step. This work demonstrates the power of ruthenium‐catalyzed alkenylation as a platform reaction to develop more complex transformations, with multiple C? H functionalization steps taking place in a single operation to access novel carbocyclic structures.     

Photoredox‐Catalyzed Functionalization of Alkenes with Thiourea Dioxide: Construction of Alkyl Sulfones or Sulfonamides

Sulfonylation of alkenes through photoredox‐catalyzed functionalization of alkenes with thiourea dioxide under visible‐light irradiation is achieved. The reaction of alkenes, thiourea dioxide and electrophiles provides a green and efficient access to alkyl sulfones and sulfonamides. A broad reaction scope is presented with good functional group compatibility and excellent regioselectivity. A plausible mechanism involving a radical addition process with sulfur dioxide radical anion (SO₂^‐) derived from the oxidation of sulfur dioxide anion (SO₂^2–) is proposed, which is supported by fluorescence quenching experiments.     

High‐Temperature and High‐Energy‐Density Dipolar Glass Polymers Based on Sulfonylated Poly(2,6‐dimethyl‐1,4‐phenylene oxide)

A new class of high‐temperature dipolar polymers based on sulfonylated poly(2,6‐dimethyl‐1,4‐phenylene oxide) (SO₂‐PPO) was synthesized by post‐polymer functionalization. Owing to the efficient rotation of highly polar methylsulfonyl side groups below the glass transition temperature (T_g≈220 °C), the dipolar polarization of these SO₂‐PPOs was enhanced, and thus the dielectric constant was high. Consequently, the discharge energy density reached up to 22 J cm^?3. Owing to its high T_g , the SO₂‐PPO₂₅ sample also exhibited a low dielectric loss. For example, the dissipation factor (tan δ) was 0.003, and the discharge efficiency at 800 MV m^?1 was 92 %. Therefore, these dipolar glass polymers are promising for high‐temperature, high‐energy‐density, and low‐loss electrical energy storage applications.     

Solvent‐Mediated Functionalization of Benzofuroxan on Electron‐Rich Ruthenium Complex Platform

An unprecedented reactivity profile of biochemically relevant R‐benzofuroxan (R=H, Me, Cl), with high structural diversity and molecular complexity on a selective {Ru(acac)₂} (acac=acetylacetonate) platform, in conjugation with EtOH solvent mediation, is revealed. This led to the development of monomeric [Ru^III(acac)₂(L^1R)] ( 1 a – 1 c ; L^1R=2‐nitrosoanilido derivatives) and dimeric [{Ru^II(acac)₂}₂(L^2R)] ( 2 a – 2 b ; L^2R=(1E,2E)‐N¹,N²‐bis(2‐nitrosophenyl)ethane‐1,2‐diimine derivatives) complexes in one pot with a change in the metal redox conditions. The functionalization of benzofuroxan in 1 and 2 implied in situ reduction of N=O to NH^? in the former and solvent‐assisted multiple N?C coupling in the latter. The aforesaid transformation processes were authenticated through structural elucidation of representative complexes, and evaluated by their spectroscopic/electrochemical features, along with C₂D₅OD labeling and monitoring of the impact of substituents (R) in the benzofuroxan framework on the product distribution process. The noninnocent potential of newly developed L¹ and L² in 1 and 2 , respectively, was also probed by spectroelectrochemistry in combination with DFT calculations.     

Seamless Rim‐Functionalization of h‐BN with Silica—Experiment and Theoretical Modeling

Boron nitride contains six‐ring layers, which are isostructural to graphene, and it exhibits similar extraordinary mechanical strength. Unlike graphene, hexagonal boron nitride (h‐BN) is an insulator and has some polar features that make it a perfect material for those applications graphene is not suitable for, for example, purely ionic conductors, insulating membranes, transparent coatings, composite ceramics, high oxidation resistance materials. We report here a selective rim‐functionalization of h‐BN with SiO₂ by using the Stöber process. A closed, protruding ring of SiO₂ is formed covering all edges perpendicular to the [001] zones of the h‐BN stacks and thus shield the most reactive centers of BN layers. SEM and HAADF‐STEM images, X‐ray spectroscopy, and atomic force microscopy confirm the rim‐functionalization by SiO₂. XRD demonstrates the absence of any intercalation phenomenon of BN and reveals the glassy nature of the SiO₂ rims. Selected variations of synthesis and theoretical modeling both confirm that rim activation by water prior to the Stöber condensation is crucial. First‐principles calculations also confirm that dangling bonds of clean BN edges merge to give interlayer bonds that make further functionalization much more difficult. The reported reaction pathway should allow for other new functionalizations of pure BN and of the rimmed SiO₂/h‐BN composites.     

Effect of Non‐Specifically Adsorbed Ions on the Surface Oxidation of Pt(111)

The oxidation processes of a Pt(111) electrode in alkaline electrolytes depend on non‐specifically adsorbed ions according to in situ X‐ray diffraction and infrared spectroscopic measurements. In an aqueous solution of LiOH, an OH_ad adlayer is formed in the first oxidation step of the Pt(111) electrode as a result of the strong interaction between Li⁺ and OH_ad, whereas Pt oxidation proceeds without OH_ad formation in CsOH solution. Structural analysis by X‐ray diffraction indicates that Li⁺ is strongly protective against surface roughening caused by subsurface oxidation. Although Cs⁺ is situated near the Pt surface, the weak protective effect of Cs⁺ results in irreversible surface roughening due to subsurface oxidation.     

One‐step,two‐electron oxidation of cis‐diaquabis(1,10‐phenanthroline)chromium(III) to cis‐dioxobis(1,10‐phenanthroline)chromium(V) by periodate in aqueous acidic solutions

The kinetics of oxidation of cis‐[Cr^III(phen)₂(H₂O)₂]³⁺ (phen = 1,10‐phenanthro‐ line) by IO₄^? has been studied in aqueous acidic solutions. In the presence of a vast excess of [IO₄^?], the reaction is first order in the chromium(III) complex concentration. The pseudo‐first‐order rate constant, k_obs, showed a very small change with increasing [IO₄^?]. The dependence of k_obs on [IO₄^?] is consistent with Eq. (i). (i) The pseudo‐first‐order rate constant, k_obs, increased with increasing pH, indicating that the hydroxo form of the chromium(III) complex is the reactive species. An inner‐sphere mechanism has been proposed for the oxidation process. The thermodynamic activation parameters of the processes involved are also reported. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 563–568, 2011     

Ruthenium‐Catalyzed Cascade C?H Functionalization of Phenylacetophenones

Three orthogonal cascade C H functionalization processes are described, based on ruthenium‐catalyzed C H alkenylation. 1‐Indanones, indeno indenes, and indeno furanones were accessed through cascade pathways by using arylacetophenones as substrates under conditions of catalytic [{Ru(p‐cymene)Cl₂}₂] and stoichiometric Cu(OAc)₂. Each transformation uses C H functionalization methods to form C C bonds sequentially, with the indeno furanone synthesis featuring a C O bond formation as the terminating step. This work demonstrates the power of ruthenium‐catalyzed alkenylation as a platform reaction to develop more complex transformations, with multiple C H functionalization steps taking place in a single operation to access novel carbocyclic structures.     

Ligand‐Promoted meta‐C−H Functionalization of Benzylamines

Meta‐C−H functionalization of benzylamines has been developed using a Pd^II/transient mediator strategy. Using 2‐pyridone ligands and 2‐carbomethoxynorbornene (NBE‐CO₂Me) as the mediator, arylation, amination, and chlorination of benzylamines are realized. This protocol features a broad substrate scope and is compatible with heterocylic coupling partners. Moreover, the loading of the Pd can be lowered to 2.5 mol % by using the optimal ligand.     

Oxidative Rearrangement Coupling Reaction for the Functionalization of Tetrahydro‐β‐carbolines with Aromatic Amines

The observation of an unexpected oxidative rearrangement coupling reaction led to the development of a novel method for the efficient functionalization of tetrahydro‐β‐carbolines (THβCs). The treatment of THβCs with photogenerated singlet oxygen (¹O₂) afforded unstable dioxetanes, which underwent further transformation to form new bonds in the presence of trifluoroacetic acid. This operationally simple protocol exhibits broad functional‐group tolerance and is suitable for the late‐stage functionalization of complex druglike molecules.     

Polyisobutylene‐based polyurethanes. VIII. Polyurethanes with ‐O‐S‐PIB‐S‐O‐ soft segments

We describe the synthesis, characterization, and select properties of a novel polyurethane (PU) prepared using a new polyisobutylene diol, HO‐CH₂CH₂‐S‐PIB‐S‐CH₂CH₂‐OH, soft segment and conventional hard segments. The diol is synthesized by terminal functionalization of ally‐telechelic PIB followed by low‐cost thiol‐ene click chemistry. Properties of ‐S‐ containing PU (PIB_S‐PU) containing 72.5% PIB were investigated and compared to similar PUs made with HO‐PIB‐OH (PIB_O‐PU). Hydrolytic resistance was studied by contact with phosphate‐buffered saline, oxidative resistance by immersing in concentrated HNO₃, and metal ion oxidation resistance by exposure to CoCl₂/H₂O₂. Hydrolytic and oxidative resistances of PIB_S‐PU and PIB_O‐PU are similar and superior to a commercial PDMS‐based PU, Elast‐Eon? E2A. According to ¹H NMR spectroscopy the ‐S‐ in PIB_S‐PUs remained unchanged upon treatment with HNO₃, however, oxidized mainly to ‐SO₂‐ by CoCl₂/H₂O_2. Static mechanical properties of PIB_S‐PU and PIB_O‐PU are similar, except creep resistance of PIB_S‐PU is surprisingly superior. The thermal stability of PIB_S‐PUs is ～15 °C higher than that of PIB_O‐PU. FTIR spectroscopy indicates H bonded S atoms (N‐H…S) between soft and hard segments, which noticeably affect properties. DSC and XRD studies suggest random low‐periodicity crystals dispersed within a soft matrix. Energy dispersive X‐ray spectroscopy–scanning electron microscopy indicates homogeneous distribution of S atoms on PIB_S‐PU surfaces. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1119–1131     

Visible‐Light‐Driven Water Oxidation by a Molecular Manganese Vanadium Oxide Cluster

Photosynthetic water oxidation in plants occurs at an inorganic calcium manganese oxo cluster, which is known as the oxygen evolving complex (OEC), in photosystem II. Herein, we report a synthetic OEC model based on a molecular manganese vanadium oxide cluster, [Mn₄V₄O₁₇(OAc)₃]^3?. The compound is based on a [Mn₄O₄]⁶⁺ cubane core, which catalyzes the homogeneous, visible‐light‐driven oxidation of water to molecular oxygen and is stabilized by a tripodal [V₄O₁₃]^6? polyoxovanadate and three acetate ligands. When combined with the photosensitizer [Ru(bpy)₃]²⁺ and the oxidant persulfate, visible‐light‐driven water oxidation with turnover numbers of approximately 1150 and turnover frequencies of about 1.75 s^?1 is observed. Electrochemical, mass‐spectrometric, and spectroscopic studies provide insight into the cluster stability and reactivity. This compound could serve as a model for the molecular structure and reactivity of the OEC and for heterogeneous metal oxide water‐oxidation catalysts.