大气压光电离技术及其应用研究进展

大气压光电离离子源(APPI)是一种新兴的用于液质联用的软电离离子源,它是利用光化学作用将气相中样品电离的离子化技术,该技术促进了质谱技术对弱极性化合物的分析检测。介绍了液相色谱–质谱/质谱联用技术中大气压光电离的基本原理、应用优点,综述了其在定性、定量分析检测中的应用。     

计算机辅助确定LC-MS中的分子离子的初步研究

LC-MS联用技术灵敏度高、专属性好、样品处理简单、快速,而且多级质谱能够提供丰富的化合物结构信息.同时,电喷雾离子化(ESI)是一种软电离技术,特别适合热不稳定炸药及耐热炸药的分析,有关电喷雾电离质谱对炸药的分析已有若干报道.     

薄层色谱与质谱联用的研究进展

薄层色谱(TLC)是一类非常实用的液相色谱方法,由于其装置简单、操作便捷、灵活、通量高、成本低,以及样品前处理简单等优点,在许多行业的检测中都有广泛的应用并扮演着重要的角色。随着现代检测技术的不断发展以及各种检测技术综合应用程度的加深,薄层色谱与质谱的联用(TLC-MS)也成为这一方法的重要发展方向。随着我国医药、食品、科学仪器等事业的不断发展和升级,相信薄层色谱-质谱联用技术可以起到更好的作用,并迎来发展的契机。该综述将目前薄层色谱-质谱的联用形式分为3类,一是接口仪器的间接联用,二是质谱对薄层板的原位检测,三是质谱对薄层分离过程的实时监测,并按此分类对典型的联用形式进行了总结和简要描述。随着薄层色谱-生物自显影技术的广泛使用,薄层色谱与质谱联用的技术方法极大地提高了食品、药用生物活性物质的研发效率。目前,薄层色谱与质谱联用发展的主要瓶颈是“即插即用”型部件的设计和商品化。具有实时监测功能,同时又兼备灵活扫描功能和高通量特点的TLC-MS技术也很令人期待。此外,不同种类TLC-MS解吸-电离技术的对比研究也是有待讨论的应用问题。     

辅助电极对纳升电喷雾影响的研究

电喷雾质谱作为一种有效的软电离技术易于和各种液相分离技术如高效液相色谱以及毛细管电泳等技术实现在线联用,已越来越广泛地用于生物大分子的分析鉴定,但常规电喷雾技术要求分析试剂流速一般为1～10μL／min,耗样量大．因而低样品消耗、高灵敏的纳升电喷雾技术的研究越来越受到重视。纳升电喷雾技术因其喷雾头口径较小,产生的泰勒锥体也相应减小,样品分子的去溶剂化和离子化效率大大提高,有文献报道,利用纳升电喷雾技术可检测到10^-18mol级蛋白样品。     

基于毛细管电泳技术的高灵敏度蛋白质组学技术发展

近年来,蛋白质组学技术在样品前处理、分离技术和质谱检测技术方面获得了快速发展,已经可以实现在几小时内对上万种蛋白的同时定性和定量分析。然而,目前的主流蛋白质组学技术仍无法满足极微量生物样品,尤其是单细胞样品的组学分析需求。毛细管电泳分离技术具有峰宽窄、柱效高、样品用量少等优势,是与高分辨质谱在线联用的理想选择之一。该文评述了集成化和在线样品前处理以及主流的纳升液相色谱-质谱联用系统在高灵敏度蛋白质组学分析领域的发展现状和挑战,认为该领域的重要技术挑战之一在于目前的纳升液相色谱分离已经无法完全匹配现代高分辨质谱超过40 Hz的超高扫描速度,从而导致质谱使用效率的降低。针对上述技术挑战,该文重点探讨了毛细管电泳-质谱联用技术的独特技术优势和潜在发展机遇,主要包括：（1）面向微量酶解多肽样品的高柱效毛细管电泳分离。通过采用毛细管电色谱可以进一步改善毛细管电泳柱容量不足的局限;（2）面向高灵敏度分析的无鞘液/鞘液接口开发;（3）高效毛细管电泳分离与高扫描速度质谱检测的协同化使用。总之,我们预期毛细管电泳-质谱联用技术的进一步发展有望在针对单细胞等超微量生物学样品的蛋白质组学分析中获得更广泛的应用。     

中药方剂化学成分液质联用分析中标准质谱库的建立和应用

利用电喷雾离子化四级杆飞行时间串联质谱(ESI-Q-TOF)技术,以四物汤类方为例,建立了类方成分的液质联用分析质谱库。利用Masslynx工作站的Chromalynx模块的检索和与质谱库比较的功能,可以快速鉴定色谱图中各个色谱峰。此方法可应用于液质联用检测系统的谱库检测,提高了对类方成分鉴定的效率和可靠性。本质谱库共收录了液质联用条件下57个四物汤类方标准品的质谱信息,包括正负离子模式下各成分的保留时间、准分子离子峰及其碎片离子的精确质量数。该质谱库支持标准NIST谱图检索及比对方法,可自动完成总离子流色谱图中各色谱峰的识别、质谱图提取及鉴定。     

薄层色谱—质谱联用技术及其进展

概述了薄层色谱同质谱的联用（TLC-MS）技术及其进展，着重介绍了TLC-MS联用技术中的多种接口及已经开始广泛使用的几种较先进的电离方法。     

碳纤维离子化质谱技术的研究与应用

碳纤维离子化技术是一种新型敞开式质谱技术,可在开放式大气压环境下对各种形态的样品或样品表面物质进行检测,其分析成本低、通量高、简便、实时、快速,简化了工作流程,降低了样品的基质效应。该文从碳纤维离子化质谱技术的原理出发,介绍了影响其电离效率的主要因素,如碳纤维形态、碳纤维温度、碳纤维上所加电压、碳纤维与离子进样口的距离以及样品添加的方式,并对该技术近几年的改进和发展,及其在食品药品、法医毒物及生物样品、品种鉴别和环境分析等领域的应用进行了综述,详细介绍了其特点和优势。最后讨论了碳纤维离子化质谱技术存在的不足,以及未来可能的研究方向。     

质谱及色谱-质谱联用技术在多糖结构分析中的应用

综述了从1968-2010年间质谱及色谱-质谱联用分析法在多糖结构分析中的应用,包括电子轰击质谱、化学电离质谱、快原子轰击质谱、电喷雾质谱、基质辅助激光解吸离子化质谱、气相色谱-质谱、液相色谱-质谱和毛细管电泳-质谱法(引用文献42篇)。     

液相色谱-质谱分析中的基质效应

介绍了液相色谱-质谱(LC-MS)分析中基质效应的产生机制、来源、评定方法和消除措施.基质效应由共流出的分析物和基质的竞争以及影响接口的离子化效率所致,主要来源于生物样品中的内源性组分和样品处理后引入的杂质.不同批次的生物样品,其基质效应存在差异,可通过柱后注射法和提取后添加法2种方法评定基质效应.实例介绍了基质效应、提取回收率和整个方法过程效率的具体计算方法.基质效应可能影响LC-MS方法的灵敏度、准确度和精密度,通过样品前处理、氘代内标的使用、色谱分离、质谱分析等过程的优化可有效消除基质效应.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.