网络安全产品研究

本文在研究了网络安全的国内外有关情况后对网络安全技术进行了探讨 ,介绍了一种简单而实用的网络安全产品 ,添补了这方面的空白 ,而且本文介绍的产品已经应用到了许多部门 ,为网络安全做出了贡献     

探究两个一次函数图像的对称规律

在学习了反比例函数后,老师带大家总结了两个点及函数图像的对称性.对于两个一次函数对称的情况,我自己进行了探索,发现了     

分数阶Chen-like系统混沌性态分析及控制

提出了一类Chen-like系统,研究了该系统奇点稳定性、混沌等动力学性态.讨论了Chen-like系中参数与阶数对系统混沌性态的影响,并给出了Chem-like系统出现混沌性态的阶次范围.与分数阶Chen系统相比,系统出现混沌性态的阶次范围增大了.根据分数阶系统稳定性理论及线性反馈控制,对系统进行了混沌控制,得出了混沌系统在平衡点处的稳定性条件.数值模拟验证了理论分析的正确性.     

数学教辅书中的一类极值问题解答错误及修正

指出了一些微积分教辅书中一类极值问题的解答错误,分析了产生错误的原因,仔细研究了变量之间的关系,从而给出了正确的答案.     

一种积分数据的函数重构及其误差估计

本文考虑了一种基于函数积分平均值的函数重构方法,在定义了一个插值算子之后建立了误差估计.从理论分析结果可以看出这种方法得到的解是适定的,因此我们不需要选择正则化参数,这样就简化了算法,而且最后一系列的数值结果很好的验证了这种方法的有效性.     

对称阵的最小多项式及其应用

本文研究了对称阵的最小多项式的存在唯一性,利用对称阵的正交分解的基本思想,获得了对称阵的最小多项式的具体表示形式,改进了Hamilton-Caylay定理.并且给出了对称阵最小多项式的几个应用.     

分层教学的Bayes分析

对学校分层教学进行了初步探索 ,提出了分层分班的 Bayes决策 ,介绍了分层分班方法 ,获得了一些结论 ,并完成了对这些结论的证明 ,从理论上论述了分层教学是实施“因材施教”教育原则和素质教育的有效途径 ,给出了应用实例 .     

标准体系的使用期的模型与分析

本文提出了关于标准体系使用期的两个模型。首先定义了标准使用期,然后讨论了模型的合理性。通过模型讨论了标准使用期的性质,给出了数值示例。提出了需进一步研究的问题。     

分数阶抛物方程控制系统最优控制的稳定性

本文研究了一类分数阶抛物方程的最优控制问题,主要讨论了其最优控制与最优值的稳定性.利用了凸方法获得了获得了这类问题最优控制的稳定性结果,并且推广了在参考文献[3]中的最优控制稳定性结论.     

系统动力学在城市污水再生回用系统中的应用

用系统动力学方法研究了城市污水回用系统.首先分析了影响城市污水回用系统的诸多因素以及它们之间的相互关系,探讨了污水再生回用系统行为和结构的特点,确定了系统中因素之间的定量关系,建立了城市污水回用系统动力学(SD)模型,并介绍了模型的检验方法.同时给出了SD模型的具体应用实例,对西北地区的某一城市的污水回用进行了预测和分析,提出了符合该城市发展的污水回用方案.     

宏观因素影响下的系统中元件重要性研究

为研究复杂系统在工作环境中其组成元件对系统安全运行的重要性,将汪培庄先生的因素空间理论与笔者提出的空间事故树理论相结合,构造了一套元件重要性研究方法.构建系统T={U,C,D},将元件作为研究对象集合U,系统工作的宏观环境作为因素集C,元件重要性排序集作为D.对宏观环境中的工作时间a1和温度a_2进行划分形成不同的状态区域S_q,计算在S_q中元件xj的失效权重γ(AS_q(x_j))和在S_q中系统T的失效权重δ(AS_q(T))),从而得到x_j在S状态下的等效失效权重Z(AS_q(x_j)),研究状态S_q下的原件重要性排序D_η,及元件x_j失效性对a_1及a_2的敏感性.使用一个实际的电气系统维修情况统计资料,使用上述方法进行了研究,结果表明:不同工作环境下元件对系统的重要程度是不同的.元件对温度和使用时间是敏感的,并得到了在10³0°且5030°且50⁷5d环境下工作系统可靠性是最高的结论.在给定工作环境下,重要性大的元件多储备,重要性小的元件少储备,以满足系统维修需要,并指导实际工程.     

On the local semiconcavity of the solutions of the eikonal equation

We show that if the Hamiltonian is locally semiconvex with respect to the state variables and strictly convex with respect to the gradient then every viscosity solution of the eikonal equation is locally semiconcave. Furthermore, in the 1D case, we show that every viscosity solution of the eikonal equation is semiconcave if and only if the Hamiltonian is Lipschitz continuous with respect to the state variable.     

On the numerical approach of the enthalpy method for the Stefan problem

In this article an error bound is derived for a piecewise linear finite element approximation of an enthalpy formulation of the Stefan problem; we have analyzed a semidiscrete Galerkin approximation and completely discrete scheme based on the backward Euler method and a linearized scheme is given and its convergence is also proved. A second‐order error estimates are derived for the Crank‐Nicolson Galerkin method. In the second part, a new class of finite difference schemes is proposed. Our approach is to introduce a new variable and transform the given equation into an equivalent system of equations. Then, we prove that the difference scheme is second order convergent. © 2004 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2004     

On the analyticity and the almost periodicity of the solution to the Euler equations with non-decaying initial velocity

The Cauchy problem of the Euler equations in the whole space is considered with non-decaying initial velocity in the frame work of . It is proved that if the initial velocity is real analytic then the solution is also real analytic in spatial variables. Furthermore, a new estimate for the size of the radius of convergence of Taylor's expansion is established. The key of the proof is to derive the suitable estimates for the higher order derivatives of the bilinear terms. It is also shown the propagation of the almost periodicity in spatial variables.     

On the determination of the control parameters of the optimal can-order policy

This paper considers the well-known class of can-order policies. This type of coordinated replenishment policies accounts for a joint set-up cost structure, where a major set-up cost is incurred for any order and an individual minor set-up cost is charged for each item in the replenishment. Recent comparative studies have pointed out that the performance of the optimal can-order policy is poor, compared to other coordinated replenishment strategies, when the major set-up cost is high. This paper shows that it is the approximate decomposition method to calculate the optimal canorder parameters which performs bad in such situations and not the policy itself. Attention is focused to a subclass of can-order policies, which is close to the optimal can-order policy for high major set-up costs. A solution procedure is developed to calculate the optimal control parameters of this policy. It is shown that a properly chosen combination of the solution procedures to calculate can-order parameters leads to a can-order strategy which performs as well as other coordinated replenishment policies.     

逆谱理论新方法中A-函数和势函数依赖关系的稳定性研究

对于一维Schrdinger算子,本文基于Simon给出的惟—性定理(势函数由A-函数惟一确定)证明了势函数连续依赖于A-函数;反过来,若势函数q∈L~1(0,∞),给出了A-函数也连续依赖于势函数的结论.     

Acceleration of the convergence of the Laguerre series in the problem of inverting the Laplace transform

When the Laplace transform is inverted numerically, the original function is sought in the form of a series in the Laguerre polynomials. To accelerate the convergence of this series, the Euler-Knopp method is used. The techniques for selecting the optimal value of the parameter of the transform on the real axis and in the complex plane are proposed.     

On the algorithm of the solution of the signorini problem

An algorithm is proposed for solving the Signorini problem /1/ in the formulation of a unilateral variational problem for the boundary functional in the zone of possible contact /2/. The algorithm is based on a dual formulation of Lagrange maximin problems for whose solution a decomposition approach is used in the following sense: a Ritz process in the basis functions that satisfy the linear constraint of the problem, the differential equation in the domain, is used in solving the minimum problem (with fixed Lagrange multipliers); the maximum problem is solved by the method of descent (a generalization of the Frank-Wolf method) under convexity constraints on the Lagrange multipliers. The algorithm constructed can be conisidered as a modification of the well-known algorithm to find the Udzawa-Arrow-Hurwitz saddle points /3, 4/. The convergence of the algorithm is investigated. A numerical analysis of the algorithm is performed in the example of a classical contact problem about the insertion of a stamp in an elastic half-plane under approximation of the contact boundary by isoparametric boundary elements. The comparative efficiency of the algorithm is associated with the reduction in the dimensionality of the boundary value problem being solved and the possibility of utilizing the calculation apparatus of the method of boundary elements to realize the solution.     

不忽略一次项损失时望大特性质量损失函数设计

田口先生提出的质量特性损失函数是用二次项来表示的,对于望大特性而言,质量特性实际上不可能达到无穷大。讨论了不能忽略一次项损失时,望大特性质量损失函数应采用二次式表示。研究了二次式损失函数中一次项损失系数和二次项损失系数确定的方法。比较分析了二次式损失函数中一次项损失和二次项损失的大小。本文的研究结果显示,田口先生经典的二次项损失函数是二次式损失函数的一种形式。实际问题也验证了本文的研究成果。     

On the fallacy of the likelihood principle

By using the direct and inverse binomial experiments it is shown that there is a situation where Birnbaum's basic axiom of mathematical equivalence and the likelihood principle is a tautology. This observation disqualifies Birnbaum's proof of the likelihood principle based on the axioms of mathematical equivalence and conditionality. The implication of this disproof of Birnbaum's argument for Bayesian statistics is briefly discussed.