基于数据挖掘方法的开放骨架磷酸铝定向合成参数分析

开放骨架磷酸铝化合物是多孔晶体材料的一个重要家族。然而,这类材料的合成受到反应原料、凝胶组成、溶剂、模板剂、结晶温度和结晶时间等多个因素的影响。本文以吉林大学“无机制备与合成化学国家重点实验室”建立的开放骨架磷酸铝合成反应数据库为研究对象,采用最大权重最小冗余特征选择算法(Maximum weight and minimum redundancy,MWMR),在充分考虑合成参数自身的重要程度和合成参数之间的相关关系的前提下,分析了溶剂、模板剂等合成参数对于合成含有(8,6)元环结构开放骨架磷酸铝的影响。通过大量实验验证了该方法在开放骨架磷酸铝合成参数分析中的有效性,分析了合成参数对产物生成的影响。实验结果表明模板剂的几何参数、模板剂中C原子和N原子的个数比,溶剂的偶极距等参数可能对于该类结构的合成具有较为重要的影响。     

基于数据挖掘方法的开放骨架磷酸铝定向合成参数分析

开放骨架磷酸铝化合物是多孔晶体材料的一个重要家族。然而,这类材料的合成受到反应原料、凝胶组成、溶剂、模板剂、结晶温度和结晶时间等多个因素的影响。本文以吉林大学"无机制备与合成化学国家重点实验室"建立的开放骨架磷酸铝合成反应数据库为研究对象,采用最大权重最小冗余特征选择算法(Maximum weight and minimum redundancy,MWMR),在充分考虑合成参数自身的重要程度和合成参数之间的相关关系的前提下,分析了溶剂、模板剂等合成参数对于合成含有(8,6)元环结构开放骨架磷酸铝的影响。通过大量实验验证了该方法在开放骨架磷酸铝合成参数分析中的有效性,分析了合成参数对产物生成的影响。实验结果表明模板剂的几何参数、模板剂中C原子和N原子的个数比,溶剂的偶极距等参数可能对于该类结构的合成具有较为重要的影响。     

数据挖掘辅助定向合成(Ⅰ)具有特定孔道结构的微孔磷酸铝

采用决策树方法对微孔磷酸铝的合成反应数据库进行了数据挖掘研究, 结果表明, 有机胺模板剂的属性对特定孔道的生成起着至关重要的作用. 进一步分析得到合成十二元环AlPO4-5微孔磷酸铝的约束条件, 并从理论上预测出用于合成十二元环AlPO4-5微孔磷酸铝的一系列新的有机胺模板剂. 部分理论分析结果得到了分子力学计算的有力支持, 并被合成实验所验证.     

数据挖掘辅助定向合成（I）——具有特定孔道结构的微孔磷酸铝

采用决策树方法对微孔磷酸铝的合成反应数据库进行了数据挖掘研究．结果表明，有机胺模板剂的属性对特定孔道的生成起着至关重要的作用．进一步分析得到合成十二元环AlPO4-5微孔磷酸铝的约束条件，并从理论上预测出用于合成十二元环AlPO4-5微孔磷酸铝的一系列新的有机胺模板剂．部分理论分析结果得到了分子力学计算的有力支持，并被合成实验所验证．     

用分子动力学模拟方法研究层孔与微孔磷酸铝化合 物中有机胺的模板作用: 指 导定向合成的有效途径

用分子动力学方法,研究了有机胺模板剂对二维层孔与三维微孔磷酸铝化合物的模板作用。依据主-客体间的非键相互作用能量,可以有效地预测出适于某一特定结构的有机胺模板剂。通过选择理论预测的有机胺分子作模板剂,在溶剂热体系中可以定向地合成出具有特定结构的化合物。这一工作对于微孔功能体系的分子工程学研究具有一定的指导意义。     

用分子动力学模拟方法研究层孔与微孔磷酸铝化合 物中有机胺的模板作用: 指 导定向合成的有效途径

用分子动力学方法,研究了有机胺模板剂对二维层孔与三维微孔磷酸铝化合物的模板作用。依据主-客体间的非键相互作用能量,可以有效地预测出适于某一特定结构的有机胺模板剂。通过选择理论预测的有机胺分子作模板剂,在溶剂热体系中可以定向地合成出具有特定结构的化合物。这一工作对于微孔功能体系的分子工程学研究具有一定的指导意义。     

新型层状氟化磷酸铝[C4H12N2][Al2(PO4)2(H2O)2F2]的水热合成与表征

自从1982年Wilson等发现一类新型微孔材料磷酸铝分子筛(AlPO4-n)以来,大量具有新颖结构的磷酸铝化合物被合成出来,它们在催化、离子交换、吸附和主-客体组装等方面均具有潜在的应用前景,这类化合物大多是在水热或溶剂热体系中和有机模板剂存在条件下合成的,1978年,Flanigen等首先在反应体系中加入氟离子作矿化剂合成了硅晶体,后来,氟离子方法在硅铝体系和金属磷酸盐体系中也得到了广泛的应用,氟离子在反应过程中起到矿化剂或结构导向剂的作用,     

开放骨架磷酸铝合成反应数据库的建立与应用（I）

本文介绍了开放骨架磷酸铝合成反应数据库的建立、收录的数据资料信息和数据库的检索查询方法,并对该数据库就骨架元素组成、反应产物的结构维数、孔道环数、合成所用的有机模板剂等方面做了统计分析．磷酸铝合成反应数据库的建立对于微孔功能体系的分子工程学研究提供了重要的基础数据．     

模板固相合成磷酸铝及其表征

Ｔ－磷酸铝的合成用水热方法,需９５０℃,２０天才能得到［１］。研究结果表明用固相方法,１５０℃,２小时合成了Ｔ－磷酸铝,同样条件下有模板存在可以得到磷酸铝微晶和Ｔ－磷酸铝,用ＸＲＤ、ＩＲ、ＩＣＰ和化学分析方法对产物进行了表征。 磷酸铝是一类具有广而重要应用的材料,过去十多年里,应用模板在胶态介质中水热方法合成了具有微孔、小孔、中孔的一系列磷酸铝类材料。由于其具有多种结构和组成,对热和水热的稳定性,使得它们在吸附分离、催化剂及催化剂载体、土壤科学、污水处理、医药上调节胃酸等中起着重要作用。特别是在…     

基于特征选择的决策树方法在磷酸铝AlPO4-5定向合成中的应用

分子筛类开放骨架材料的合成与结构关系研究对实现这类材料的定向合成起着至关重要的作用. 本文在建立开放骨架磷酸铝合成反应数据库的基础上, 提出了利用基于特征选择的决策树(C5.0)方法, 考察了不同反应条件(即各反应特征参数)对磷酸铝分子筛AlPO4-5生成的影响. 基于决策树模型, 利用8个反应特征参数,可以有效预测磷酸铝分子筛AlPO4-5的生成, 准确率达到88.18%, 接收者操作特性(ROC)曲线下面积(AUC)达到90%. 研究结果表明, 在众多的反应特征参数中, 有机模板剂的几何尺寸参数, 特别是模板剂的次长距离, 是影响AlPO4-5分子筛合成的重要因素.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.