Trapping Nanostructures on Surfaces through Weak Interactions

The assembly of imidazole‐functionalized phenanthroline‐strapped zinc porphyrins (ZnPorphen) with alkyl or polyethylene glycol (PEG) side chains was studied in solution and by AFM after casting on highly oriented pyrolytic graphite (HOPG) or mica. The nature of the solvent and its evaporation time influenced the morphology of the objects observed. On HOPG, short rods of about 100 nm were observed after fast evaporation of solutions of the alkyl derivatives in CHCl₃, THF, or pyridine, whereas islands of aligned rows of longer wires were obtained from methylcyclohexane (MCH). Slow evaporation of MCH led to a three‐dimensional assembly. The PEG porphyrin assembled into short wires on HOPG or fibers on mica after slow evaporation of solutions in THF. This study shows the role of surface–molecule interactions in the interfacial assembly of ZnPorphen derivatives and contributes to understanding the parameters that control their noncovalent assembly into molecular wires on a surface.     

Surface-tuned assembly of porphyrin coordination oligomers

Two self-complementary phenanthroline-strapped porphyrins bearing imidazole arms and C 12 or C 18 alkyl chains were synthesized, and their surface self-assembly was investigated by atomic force microscopy (AFM) on mica and highly ordered pyrrolitic graphite (HOPG). Upon zinc(II) complexation, stable porphyrin dimers formed, as confirmed by DOSY (1)H NMR and UV-visible spectroscopy. In solution, the dimers formed J-aggregates. AFM studies of the solutions dip-coated onto mica or drop-casted onto HOPG revealed that the morphologies of the assemblies formed were surface-tuned. On mica, fiber-like assemblies of short stacks of J-aggregates were observed. The strong influence of the mica's epitaxy on the orientation of the fibers suggested a surface-assisted assembly process. On HOPG, interactions between the alkyl chains and the graphite surface resulted in the stabilization and trapping of monomer species followed by their subsequent association into coordination polymers on the surface. Interdigitation of the alkyl chains of separate polymer strands induced lateral association of wires to form islands that grew preferentially upon drop-casting and slow evaporation. Clusters of laterally assembled wires were observed for the more mobile functionalized porphyrins bearing C 12 chains.     

Two‐Dimensional Self‐Assembly of a Porphyrin–Polypyridyl Ruthenium(II) Hybrid on HOPG Surface through Metal–Ligand Interactions

The synthesis and self‐assembly behavior of porphyrin–polypyridyl ruthenium(II) hybrid, which consists of a flexible alkyl chain attached with two conjugated moieties is described. The electronic absorption spectrum and emission spectra show that the [C₈‐TPP‐(ip)Ru(phen)₂](ClO₄)₂, abbreviated as (C₈ip)TPPC has optical properties. Scanning tunneling microscopy (STM) studies found that the π–π interaction and metal–ligand interaction allow (C₈ip)TPPC to form self‐assembled structure and have an edge‐on orientation on the highly oriented pyrolytic graphite (HOPG) surface. The multidentate structure in (C₈ip)TPPC molecules act as linkers between the molecules and form metal–ligand coordination, which forces the assembly process in the direction of stable columnar arrays. In addition, although the sample was stored for two months in ambient conditions, STM experiments showed that the order of (C₈ip)TPPC self‐assembly only slightly decreased which indicates that the self‐assembled monolayer is stable. This work demonstrates that introducing a metal‐ligand in the porphyrin‐polypyridyl compound is a useful strategy to obtain novel surface assemblies.     

Two‐ and Three‐Dimensional Molecular Organization of Schiff‐Base Derivatives

We have designed and synthesized a series of Schiff base derivatives, and studied their structural features in two‐dimensional (2D) and three‐dimensional (3D) states by combining scanning tunneling microscopy (STM) and X‐ray diffraction experiments. The Schiff‐base derivatives with short alkyl chains crystallize easily, which allows a detailed structural analysis by X‐ray diffraction. Due to the strong adsorbate–substrate interactions, those bases with long alkyl chains easily form 2D assemblies on highly oriented pyrolytic graphite (HOPG). The STM images indicate also that the introduction of two methoxy groups into the molecule can change the structure of these 2D assemblies as a result of the increased steric hindrances, for example: the Schiff‐base derivative, bearing both methoxy groups and C₁₆H₃₃ tails, forms 2D Moiré patterns, and an alignment of pairing Schiff‐base molecules may be easily resolved. Conversely, the Schiff base derivative, bearing solely C₁₆H₃₃ tails, forms 2D non‐Moiré patterns. It is demonstrated that the 3D structural features result from the compromise of intermolecular interactions of different molecular moieties. However, there is one more factor, which also governs the 2D structure: the adsorbate‐substrate interaction. The 3D crystal structure may thus help to understand many factors involved in the formation of 2D structures, and would be helpful for designing new molecular assemblies with tailoring functions.     

Vesicle Formation from an Amphiphilic Porphyrin Derivative at the Air–Water Interface

A tetraphenyl porphyrin derivative with two C₁₆ alkyl chains covalently bound to each of the four peripheral phenyl rings through ether linkages formed multilayer clusters or vesicles at the air–water surface. More interestingly, spherical vesicles were also formed when deposited on appropriate solid surfaces, and these vesicles were stable even in dry conditions. Various microscopic images of the cast film deposited on a mica surface confirmed closed‐ended nanotube/nanorod‐type formation with necking and bulging. These narrow tubes are proposed to be intermediates for the formation of vesicles by fission at either side of the bulge. Such vesicular formation is not common when either cast or Langmuir–Blodgett films were deposited on a solid surface.     

Redox Active Two‐Component Films of Palladium and Covalently Linked Zinc Porphyrin–Fullerene Dyad

Redox active films have been generated electrochemically by the reduction of dyads consisting of fullerene C₆₀ covalently linked to zinc meso‐tetraphenyloporphyrin, ZnP? C₆₀, and palladium acetate. The films are believed to consist of a polymeric network formed via covalent bonds between the palladium atoms and the fullerene moieties. In these films, the zinc porphyrin moiety is covalently linked to the polymeric chains through the pyrrolidine ring of the fullerene. The ZnP? C₆₀/Pt films are electrochemically active in both positive and negative potential excursions. At positive potentials, two oxidation steps for the zinc porphyrin are observed. In the negative potential range, electron transfer processes involving the zinc porphyrin and the fullerene entities are observed. Film formation is also accompanied by palladium deposition on the electrode surface. The presence of a metallic phase in the film influences its morphology, structure and electrochemical properties.     

Clathrate solvates of tetra­kis(4‐methoxy­carbonyl­phenyl)porphyrin and its zinc(II)–pyridine complex,in which the porphyrin host structures are stabilized by porphyrin–porphyrin stacking and C—H⋯O attractions

Tetra­kis(4‐methoxy­carbonyl­phenyl)porphyrin, or tetra­methyl 4,4′,4′′,4′′′‐porphyrin‐5,10,15,20‐tetra­benzoate, crystallizes as a nitro­benzene 1.9‐solvate, C₅₂H₃₈N₄O₈·1.9C₆H₅NO₂, (I). The solvent mol­ecules are contained in extended channels which propagate through the host lattice between parallel screw/glide‐related columns of offset‐stacked porphyrin entities. Side packing of these columns involves π–π inter­actions between the methoxy­carbonyl­phenyl residues. Mol­ecules of the porphyrin host lie on crystallographic inversion centres. The zinc(II)–pyridine derivative pyridine­(tetra­methyl 4,4′,4′′,4′′′‐porphyrin‐5,10,15,20‐tetra­benzoato)zinc(II), [Zn(C₅₂H₃₆N₄O₈)(C₅H₅N)], (II), is a square‐pyramidal five‐coordinate complex with pyridine as an apical ligand, which crystallizes as a chloro­form–pyridine solvate. The metallo­porphyrin–pyridine units form an open layered arrangement, occluding the non‐coordinated solvent moieties within the intra­layer inter­porphyrin voids. Within such arrays, the host porphyrin mol­ecules are in contact with one another through the peripheral methoxy­carbonyl substituents. The crystal packing consists of a bilayered arrangement of inversion‐related porphyrin layers, with the axial ligands mutually penetrating into the voids of neighbouring arrays and tight offset stacking of these bilayers.     

Hydrogen‐bonded assemblies of 20‐(4‐pyridyl)porphyrin‐54,104,154‐tribenzoic acid with dimethyl sulfoxide and 4‐acetylpyridine in their dimethyl sulfoxide and tetrahydrofuran solvates

Crystals of the title compounds, 20‐(4‐pyridyl)porphyrin‐5⁴,10⁴,15⁴‐tribenzoic acid–dimethyl sulfoxide (2/5), C₄₆H₂₉N₅O₆·2.5C₂H₆OS, (I), and 20‐(4‐pyridyl)porphyrin‐5⁴,10⁴,15⁴‐tribenzoic acid–4‐acetylpyridine–tetrahydrofuran (1/2/10), C₄₆H₂₉N₅O₆·2C₇H₇NO·10C₄H₈O, (II), consist of hydrogen‐bonded supramolecular chains of porphyrin units solvated by molecules of dimethyl sulfoxide [in (I)] and 4‐acetylpyridine [in (II)]. In (I), these chains consist of heterogeneous arrays with alternating porphyrin and dimethyl sulfoxide species, being sustained by COOH...O=S hydrogen bonds. They adopt a zigzag geometry and link on both sides to additional molecules of dimethyl sulfoxide. In (II), the chains consist of homogeneous linear supramolecular arrays of porphyrin units, which are directly connected to one another via COOH...N(pyridyl) hydrogen bonds. As in the previous case, these arrays are solvated on both sides by molecules of the 4‐acetylpyridine ligand via similar COOH(porphyrin)...N(ligand) hydrogen bonds. The two crystal structures contain wide interporphyrin voids, which accommodate disordered/diffused solvent molecules, viz. dimethyl sulfoxide in (I) and tetrahydrofuran in (II).     

疏水相互作用引起Gemini表面活性剂柔性联接链的弯曲

为了理解gemini表面活性剂柔性烷基联接链在自组织过程中的特殊作用,我们合成了三种gemini表面活性剂烷基-a,w-二（二-十二烷基甲基溴化铵）（记为2C12-s-2C12×2Br (s=3, 6, 8)）。2C12-s-2C12×2Br在水表面构成铺展膜后,由于每个分子带有4根烷烃链,它们形成了稠密的烷烃尾链层。增强的烷烃尾链与联接链间的疏水相互作用促使联接链弯曲朝向空气一端,可发生弯曲的联接链长度要小于吸附在水溶液表面上的gemini表面活性剂C12-s-C12×2Br,后者每个分子只有2根烷烃链。由此可见,增强的烷烃尾链与联接链间的疏水相互作用可以有效地促进联接链的弯曲。     

Ordered arrays of organometallic iridium complexes with long alkyl chains on graphite

Iridium(III) fac-tris(2-phenylpyridine) fac-[Ir(ppy)3] complexes equipped with long alkyl chains were prepared to examine their capability to form organized arrays on the surface of highly oriented pyrolytic graphite (HOPG). The molecules form lamellar arrays at the 1-phenyloctane/HOPG interface. From the analysis of the STM images, it was concluded that the molecules align with alkyl chains being interdigitated. Similar lamellar arrays were also obtained at the air/HOPG interface upon drop-casting of toluene solutions. The lamellar structure at the molecular level leads to rectangular two-dimensional crystalline domains a few hundred nanometers long (nanoslips). Infrared external reflection spectroscopy suggested that the adsorbed alkyl chains adopt the trans-zigzag conformation in the nanoslip, although the orientations of the zigzag plane of the alkyl groups are mixed. Cyclic voltammetry indicates fast electron transfer between the adsorbed molecules and the substrate and significant intermolecular electronic interactions. It was found that annealing at high temperatures is an effective method to prepare ordered assemblies more than a few micrometer scale (microslips). The orientations of the nanoslips prepared from the racemic mixture exhibited an apparent 12-fold symmetry, while its optically active enantiomer resulted in more irregular domains with a six-fold symmetry, implying an important role of chirality on packing at the molecular level and on the orientation of the domains at larger scales. When drop-cast from more concentrated solutions than a few hundreds of micromolar, multilayers were obtained, in which the alkyl chains in the molecules are more or less perpendicular to the surface. This structure can be transformed into the nanoslips upon standing.     

Self‐Assembly of a Mononuclear [FeIII(L)(EtOH)2] Complex Bearing an n‐Dodecyl Chain on Solid Highly Oriented Pyrolytic Graphite Surfaces

The synthesis and structures of the N‐[(2‐hydroxy‐3‐methyl‐5‐dodecylphenyl)methyl]‐N‐(carboxymethyl)glycine disodium salt (H L ) ligand and its neutral mononuclear complex [Fe^III( L )(EtOH)₂] ( 1 ) are reported. Structural and electronic properties of 1 were investigated by using scanning tunneling microscopy (STM) and current imaging tunneling spectroscopy (CITS) techniques. These studies reveal that molecules of 1 form well‐ordered self‐assemblies when deposited on a highly oriented pyrolytic graphite (HOPG) surface. At low concentrations, single or double chains (i.e., nanowires) of the complex were observed, whereas at high concentration the complex forms crystals and densely packed one‐dimensional structures. In STM topographies, the dimensions of assemblies of 1 found on the surface are consistent with dimensions obtained from X‐ray crystallography, which indicates the strong similarities between the crystal form and surface assembled states. Double chains are attributed to hydrogen‐bonding interactions and the molecules align preferentially along graphite defects. In the CITS image of complex 1 a strong tunneling current contrast at the positions of the metal ions was observed. These data were interpreted and reveal that the bonds coordinating the metal ions are weaker than those of the surrounding ligands; therefore the energy levels next to the Fermi energy of the molecule should be dominated by metal‐ion orbitals.     

取代烷基侧链长度对二维纳米结构的影响

合成了一系列烷基取代的间苯三酚衍生物,并在大气条件下用扫描隧道显微镜研究了它们在高定向裂解石墨表面的吸附和组装行为.实验结果表明,这些自组装分子具有条状结构特征.在链长较短的分子图像中,两条平行的烷氧基链肩并肩地排列在苯环的一侧,另一条烷氧基链则排列在苯环的另一侧,链与链之间彼此相互交错排列形成均一的烷基条带.当链长增加时,这种高稳定性和密排结构遭到破坏,出现单个分子和分子对共存的组装结构.这是由于烷基链与烷基链之间以及烷基链与基底之间的作用力共同决定的.通过调控分子烷基链的长度可以得到不同的表面二维纳米结构.     

Coordination Chemistry‐Assembled Multicomponent Systems Built from a Gable‐Like Bis‐Porphyrin: Synthesis and Photophysical Properties

Multiporphyrinic assemblies were quantitatively formed, in one step, from a gable‐like zinc(II) bis‐porphyrin ZnP₂ and free‐base porphyrins bearing pyridyl groups. The different fragments are held together by axial 4′‐N(pyridyl)–Zn interactions. Formation of a macrocycle ZnP₂?(4′‐cisDPyP) and a bis‐macrocycle (ZnP₂)₂?(TPyP) is discussed. The macrocycle and the bis‐macrocycle were crystallized and studied by X‐ray diffraction, which confirmed the excellent complementarity between the various components. Spectrophotometric and spectrofluorimetric titrations and studies reveal high association constants for both multiporphyrinic assemblies due to the almost perfect geometrical match between the interacting units. As expected, energy transfer from the zinc porphyrin component to the free‐base porphyrin quenches the fluorescence of the zinc porphyrin components in both compounds. But while in ZnP₂?(4′‐cis DPyP) sensitization of the emission of the free‐base porphyrin was observed, in (ZnP₂)₂?(TPyP) excitation of the peripheral Zn porphyrin units does not lead to quantitative sensitization of the luminescence of the free‐base porphyrin acceptor. An unusual HOMO–HOMO electron transfer reaction from ZnP₂ to the excited TPyP unit was detected and studied.     

Highly linear self-assembled porphyrin wires

An efficient noncovalent assembly process involving high geometrical control was applied to a linear bis(imidazolyl zinc porphyrin) 7Zn, bearing C(18) substitutents, to generate linear multiporphyrin wires. The association process is based on imidazole recognition within the cavity of the phenanthroline-strapped zinc porphyrin. In chlorinated solvents, discrete soluble oligomers were obtained after (7Zn)(n) was end-capped with a terminal single imidazolyl zinc porphyrin derivative 4Zn. These soluble species, as well as their destabilization in the presence of protic solvents, were studied by UV-visible and time-resolved luminescence. In the solid state, assemblies as long as 480 nm, which corresponds to 190 iterative units or a total of 380 porphyrins, were observed by atomic force microscopy measurements on mica. The length and linearity of the porphyrin wires obtained illustrate the potential of phenanthroline-strapped porphyrins for the directional control of self-assembly processes.     

Significant Effect of the Flexibility of Bridging Alkyl Chains on the Proximity of Stacked Porphyrin and Phthalocyanine Conjugated with a Fourfold Rotaxane Linkage

Spatial distance is an important factor in controlling the functional interactions between molecular units in a conjugate; therefore, the bridging unit has been closely examined. Here, we examined the effect of the flexibility of bridging alkyl chains on the proximity of stacked porphyrin and phthalocyanine conjugated with a fourfold rotaxane linkage. We found that closely stacking two π systems requires bridging alkyl chains above a certain length, and the shorter bridges hinder stacking because of their lower flexibility. The stacking distance between porphyrin and phthalocyanine in the conjugate with decyl (C₁₀) chains was estimated to be 4.03 Å and showed a unique physical character arising from short-distance interactions. The longer alkyl chains minimized steric restriction inside the fourfold rotaxane and allowed efficient communication between the porphyrin and phthalocyanine units. This is due to the flexibility of the side chains.     

Effect of long alkyl chains of aniline donor on the photovoltaic performance of D‐π‐A zinc porphyrin for dye‐sensitized solar cells

Three novel dyes of JJ1 , JJ2 , and JJ6 featured zinc porphyrin as a basic core structure; N, N‐alkyl‐4‐(prop‐1‐yn‐1‐yl)aniline as an electron donor linked to meso‐10‐position; 4‐(prop‐1‐yn‐1‐yl)benzoic acid as an electron acceptor linked to meso‐20‐position; and 2,6‐bis(dodecyloxy)phenyl or 2,6‐bis(octyloxy)phenyl respectively linked to meso‐5 and meso‐15‐positions of zinc porphyrin have been synthesized and used for dye‐sensitized solar cells. Porphyrin JJ6 featured the shortest alkyl group (─C₄H₉) on the donor, whereas JJ2 contained the longest alkyl groups (─C₁₂H₂₅), and JJ1 has a medium length of octyl groups. With these new porphyrin sensitizers, we observed that JJ6 has 7.55% power conversion efficiency under simulated one‐sun illumination (AM 1.5 G, 100 mW/cm²) with J_SC = 18.64 mA/cm², V_OC = 0.66 V, and fill factor (FF) = 0.61, which was higher than the other two; JJ1 (7.35%) with J_SC = 18.83 mA/cm², V_OC = 0.68 V, and FF = 0.60; and JJ2 (6.33%) with J_SC = 15.69 mA/cm², V_OC = 0.62 V, and FF = 0.65. The power conversion efficiency of JJ6 and JJ1 were higher than JJ2 , demonstrating that the lengthy alkyl groups on the aniline cause a decrease in efficiency of the devices.     

Synthesis,Structure and Photophysical Properties of Ferrocenyl or Mixed Sandwich Cobaltocenyl Ester Linked meso‐Tetratolylporphyrin Dyads

We report here the design and synthesis of porphyrin–metallocene dyads consisting of a metallocene [either ferrocene or mixed sandwich η⁵‐[C₅H₄(COOH)]Co(η⁴‐C₄Ph₄) connected via an ester linkage at meso phenyl position of either free‐base or zinc porphyrin. All these dyad systems were characterized by various spectroscopic and electrochemical methods. A dimeric form of this molecule was observed in the X‐ray crystal structure of Zn‐TTPCo. The absorption spectra of all four dyads indicated the absence of electronic interactions between porphyrin macrocycle and metallocene in the ground state. However, interestingly, in all four dyads, fluorescence emission of the porphyrin was quenched (19–55%) as compared to their monomeric units. The quenching was more pronounced in ferrocene derivatives rather than cobaltocenyl derivatives. The emission quenching can be attributed to the excited‐state intramolecular photoinduced electron transfer from metallocene to singlet excited state of porphyrin and the electron‐transfer rates (k_ET) were established in the range 1.51 × 10⁸ to 1.11 × 10⁹ s^?1. They were found to be solvent dependent.     

Square‐grid coordination networks of (5,10,15,20‐tetra‐4‐pyridylporphyrinato)zinc(II) in its clathrate with two guest molecules of 1,2‐dichlorobenzene: supramolecular isomerism of the porphyrin self‐assembly

The title compound, (5,10,15,20‐tetra‐4‐pyridylporphyrinato)zinc(II) 1,2‐dichlorobenzene disolvate, [Zn(C₄₀H₂₄N₈)]·2C₆H₄Cl₂, contains a clathrate‐type structure. It is composed of two‐dimensional square‐grid coordination networks of the self‐assembled porphyrin moiety, which are stacked one on top of the other in a parallel manner. The interporphyrin cavities of the overlapping networks combine into channel voids accommodated by the dichlorobenzene solvent. Molecules of the porphyrin complex are located on crystallographic inversion centres. The observed two‐dimensional assembly mode of the porphyrin units represents a supramolecular isomer of the unique three‐dimensional coordination frameworks of the same porphyrin building block observed earlier. The significance of this study lies in the discovery of an additional supramolecular isomer of the rarely observed structures of metalloporphyrins self‐assembled directly into extended coordination polymers without the use of external ligand or metal ion auxiliaries.     

Repair of defects created by Ar+ sputtering on graphite surface by annealing as confirmed using ToF‐SIMS and XPS

Defects were created on the surface of highly oriented pyrolytic graphite (HOPG) by sputtering with an Ar⁺ ion beam, then characterized using X‐ray photoelectron spectroscopy (XPS) and time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) at 500°C. In the XPS C1s spectrum of the sputtered HOPG, a sp³ carbon peak appeared at 285.3 eV, representing surface defects. In addition, 2 sets of peaks, the C_x⁻ and C_xH⁻ ion series (where x = 1, 2, 3...), were identified in the ToF‐SIMS negative ion spectrum. In the positive ion spectrum, a series of C_xH₂^+• ions indicating defects was observed. Annealing of the sputtered samples under Ar was conducted at different temperatures. The XPS and ToF‐SIMS spectra of the sputtered HOPG after 800°C annealing were observed to be similar to the spectra of the fresh HOPG. The sp³ carbon peak had disappeared from the C1s spectrum, and the normalized intensities of the C_xH⁻ and C_xH₂^+• ions had decreased. These results indicate that defects created by sputtering on the surface of HOPG can be repaired by high‐temperature annealing.     

Oligo(p‐phenylene‐ethynylene)‐Derived Super‐π‐Gelators with Tunable Emission and Self‐Assembled Polymorphic Structures

Linear π‐conjugated oligomers are known to form organogels through noncovalent interactions. Herein, we report the effect of π‐repeat units on the gelation and morphological properties of three different oligo(p‐phenylene‐ethynylene)s: OPE3 , OPE5 , and OPE7 . All of these molecules form fluorescent gels in nonpolar solvents at low critical gel concentrations, thereby resulting in a blue gel for OPE3 , a green gel for OPE5 , and a greenish yellow gel for OPE7 . The molecule–molecule and molecule–substrate interactions in these OPEs are strongly influenced by the conjugation length of the molecules. Silicon wafer suppresses substrate–molecule interactions whereas a mica surface facilitates such interactions. At lower concentrations, OPE3 formed vesicular assemblies and OPE5 gave entangled fibers, whereas OPE7 resulted in spiral assemblies on a mica surface. At higher concentrations, OPE3 and OPE5 resulted in super‐bundles of fibers and flowerlike short‐fiber agglomerates when different conditions were applied. The number of polymorphic structures increases on increasing the conjugation length, as seen in the case of OPE7 with n=5, which resulted in a variety of exotic structures, the formation of which could be controlled by varying the substrate, concentration, and humidity.