Zinc Porphyrins with a Pyridine‐Ring‐Anchoring Group for Dye‐Sensitized Solar Cells

Anchoring groups are extremely important in controlling the performance of dye‐sensitized solar cells (DSCs). The design and characterization of sensitizers with new anchoring groups, in particular non‐carboxylic acid groups, has become a recent focus of DSC research. Herein, new donor? π? acceptor zinc? porphyrin dyes with a pyridine ring as an anchoring group have been designed and synthesized for applications in DSCs. Photophysical and electrochemical investigations demonstrated that the pyridine ring worked effectively as an anchoring group for the porphyrin sensitizers. DSCs that were based on these new porphyrins showed an overall power‐conversion efficiency of about 4.0 % under full sunlight (AM 1.5G, 100 mW cm^?2).     

A new family of heteroleptic ruthenium(II) polypyridyl complexes for sensitization of nanocrystalline TiO2 films

Two new heteroleptic ruthenium(II) photosensitizers that contains 2,2';6,2'-terpyridine with extended π-conjugation with donor groups, a 4,4'-dicarboxylic acid-2,2'-bipyridine anchoring ligand and a thiocyanate ligand have been designed, synthesized and fully characterized by CHN, mass spectrometry, UV-vis and fluorescence spectroscopies and cyclic voltammetry. The new sensitizers have either 3,5-di-tert-butyl phenyl (m-BL-5) or triphenylamine (m-BL-6) groups, where the molar extinction coefficient of both the sensitizers is higher than the analogous ruthenium dyes. Both the sensitizers were tested in dye-sensitized solar cells using two different redox electrolytes.     

Low-bandgap donor-acceptor conjugated polymer sensitizers for dye-sensitized solar cells

A set of two donor-acceptor type conjugated polymers with carboxylic acid side groups have been synthesized and utilized as active materials for dye-sensitized solar cells (DSSCs). The polymers feature a π-conjugated backbone consisting of an electron-poor 2,1,3-benzothiadiazole (BTD, acceptor) unit, alternating with either a thiophene-fluorene-thiophene triad (2a) or a terthiophene (3a) segment as the donor. The donor-acceptor polymers absorb broadly throughout the visible region, with terthiophene-BTD polymer 3a exhibiting an absorption onset at approximately 625 nm corresponding to a ～1.9 eV bandgap. The polymers adsorb onto the surface of nanostructured TiO(2) due to interaction of the polar carboxylic acid units with the metal oxide surface. The resulting films absorb visible light strongly, and their spectra approximately mirror the polymers' solution absorption. Interestingly, a series of samples of 3a with different molecular weight (M(n)) adsorb to TiO(2) to an extent that varies inversely with M(n). DSSCs that utilize the donor-acceptor polymers as sensitizers were tested using an I(-)/I(3)(-) electrolyte. Importantly, for the set of polymer sensitizers 3a with varying M(n), the DSSC efficiency varies inversely with M(n), a result that reflects the difference in adsorption efficiency observed in the film absorption experiments. The best DSSC cell tested is based on a sample of 3a with M(n) ～ 4000, and it exhibits a ～65% peak IPCE with J(sc) ～12.6 mA cm(-2) under AM1.5 illumination and an overall power conversion efficiency of ～3%.     

Dye‐Sensitized Solar Cells Based on (Donor‐π‐Acceptor)2 Dyes With Dithiafulvalene as the Donor

Dipolar metal‐free sensitizers (D‐π‐A; D=donor, π=conjugated bridge, A=acceptor) consisting of a dithiafulvalene (DTF) unit as the electron donor, a benzene, thiophene, or fluorene moiety as the conjugated spacer, and 2‐cyanoacrylic acid as the electron acceptor have been synthesized. Dimeric congeners of these dyes, (D‐π‐A)₂, were also synthesized through iodine‐induced dimerization of an appropriate DTF‐containing segment. Dye‐sensitized solar cells (DSSCs) with the new dyes as the sensitizers have cell efficiencies that range from 2.11 to 5.24 %. In addition to better light harvesting, more effective suppression of the dark current than the D‐π‐A dyes is possible with the (D‐π‐A)₂ dyes.     

Donor/acceptor complex of triphenylene and trinitrotoluene on Au(111): a scanning tunneling microscopy study

The co-adsorption of trinitrotoluene (TNT), a typical π-electron acceptor, and triphenylene (TP), a typical π-electron donor, on a Au(111) surface was investigated by in situ Electrochemical Scanning Tunneling Microscopy (ECSTM). DFT calculations proved that parallelly stacked and well-overlapped TP and TNT molecules can form Donor-Acceptor dyads through intermolecular π-π charge transfer, which agree well with the experimental results in the present work.     

Restricted Rotation of σ‐Bonds through a Rigidified Donor Structure to Increase the ICT Ability of Platinum‐Acetylide‐Based DSSCs

A series of new triarylamine‐based platinum‐acetylide complexes ( WY s) have been designed and synthesized as new sensitizers for applications in dye‐sensitized solar cells (DSSCs). With the aim of investigating the effect of a rigidifying donor structure on the photoelectrical parameters of the corresponding DSSCs, two new sensitizers, WY1 and WY2 , with rigid and coplanar fluorene units as an electron donor, were prepared. Moreover, two sensitizers that contained triphenylamine units as an electron donor, WY3 and WY4 , were also synthesized for comparison. The photo‐ and electrochemical properties of all of these new complexes have been extensively explored. We found that the dimethyl‐fluorene unit exhibited a stronger electron‐donating ability and better photovoltaic performance compared to the triphenylamine unit, owing to its rigidifying structure, which restricted the rotation of σ bonds, thus increasing the conjugation efficiency. Furthermore, WY2 , which contained a dimethyl‐fluorene unit as an electron donor and bithiophene as a π bridge, showed a relatively high open‐circuit voltage (V_oc) of 640 mV and a PCE of 4.09 %. This work has not only expanded the choice of platinum‐acetylide sensitizers, but also demonstrates the advantages of restricted rotation of donor σ bonds for improved behavior of the corresponding DSSCs.     

Electron-rich heteroaromatic conjugated polypyridine ruthenium sensitizers for dye-sensitized solar cells

Ru(II) heteroleptic complexes as photosensitizers for dye-sensitized solar cells (DSCs) are presented. The article outlines design strategies, synthetic routes, optical and photovoltaic properties of ruthenium dyes based on polypyridines as ancillary ligands containing π-conjugated electron-rich heteroaromatic groups. The integration of donor heteroaromatic substituents, typically thiophene-based moieties, strongly improves the optical properties of the sensitizers in terms of bathochromic and hyperchromic shift compared to prototypical dyes N3 and N719. These favorable properties in turn yield DSCs with superior light harvesting abilities, higher external quantum efficiencies, improved device photocurrents, and top-ranked power conversion efficiencies. In combination with excellent stabilities under thermal stress and light soaking, this class of DSC photosensitizer has great potential for practical applications.     

Organic Dyes Containing Pyrenylamine‐Based Cascade Donor Systems with Different Aromatic π Linkers for Dye‐Sensitized Solar Cells: Optical,Electrochemical, and Device Characteristics

New organic dyes containing pyrenylamine donors in a cascade arrangement and cyanoacrylic acid acceptors have been synthesized and characterized by optical, electrochemical, and theoretical studies. The dyes inherit a D ‐π¹‐D ‐π²‐A (D=donor, A=acceptor) molecular architecture where the π linkers π¹ are changed from phenyl to biphenyl and fluorene, whereas the π linker π² that connects the donor fragment with the acceptor is a phenyl unit. The conjugation pathway linking the two donor segments has been found to play a major role in the optical and electrochemical properties. Shorter π linkers such as phenyl groups facilitate the donor–acceptor interaction while the nonplanar biphenyl spacer decreases the electronic communication between the donors and enhances the oxidation propensity of the corresponding dye. All the dyes display an intense longer wavelength electronic transition,which is attributable to the amine‐to‐cyanoacrylic acid charge transfer. The extinction coefficient of this peak grows dramatically on increasing the conjugation pathway length between the two donor segments. The dyes were used as sensitizers in nanocrystalline TiO₂‐based dye‐sensitized solar cells (DSSCs) and the cascade donor system contributed to the enhancement in the device efficiency due to favorable absorption and redox properties.     

Dye molecular structure device open-circuit voltage correlation in Ru(II) sensitizers with heteroleptic tridentate chelates for dye-sensitized solar cells

Dicarboxyterpyridine chelates with π-conjugated pendant groups attached at the 5- or 6-position of the terminal pyridyl unit were synthesized. Together with 2,6-bis(5-pyrazolyl)pyridine, these were used successfully to prepare a series of novel heteroleptic, bis-tridentate Ru(II) sensitizers, denoted as TF-11-14. These dyes show excellent performance in dye-sensitized solar cells (DSCs) under AM1.5G simulated sunlight at a light intensity of 100 mW cm(-2) in comparison with a reference device containing [Ru(Htctpy)(NCS)(3)][TBA](3) (N749), where H(3)tctpy and TBA are 4,4',4"-tricarboxy-2,2':6',2"-terpyridine and tetra-n-butylammonium cation, respectively. In particular, the sensitizer TF-12 gave a short-circuit photocurrent of 19.0 mA cm(-2), an open-circuit voltage (V(OC)) of 0.71 V, and a fill factor of 0.68, affording an overall conversion efficiency of 9.21%. The increased conjugation conferred to the TF dyes by the addition of the π-conjugated pendant groups increases both their light-harvesting and photovoltaic energy conversion capability in comparison with N749. Detailed recombination processes in these devices were probed by various spectroscopic and dynamics measurements, and a clear correlation between the device V(OC) and the cell electron lifetime was established. In agreement with several other recent studies, the results demonstrate that high efficiencies can also be achieved with Ru(II) sensitizers that do not contain thiocyanate ancillaries. This bis-tridentate, dual-carboxy anchor configuration thus serves as a prototype for future omnibearing design of highly efficient Ru(II) sensitizers suited for use in DSCs.     

Novel Metal Complexes Unit of Phenanthroline Derivative for Being Used as Auxiliary Electron Acceptor in Dye Sensitizer Molecules

Donor-acceptor-π bridge-acceptor (D−A−π−A) motif dyes are promising dye sensitizers in dye-sensitized solar cells (DSSCs). In this study, to strengthen with-drawing electron force of the auxiliary electron acceptors(A) in D−A−π−A motif dye sensitizers, the metal complexes unit is be used as auxiliary electron acceptor(A) instead of organic electron-withdrawing monomer. The four polymeric metal complexes were designed, synthesized, and characterized, which used metal complexes of phenanthroline derivatives as auxiliary acceptors (A), benzodithiophene-dithiophene derivatives (BDTT) as donors (D), and 8-hydroxyquinoline derivatives as π-bridges and acceptors of the dye sensitizers, and have been used for dye sensitizers. Under AM 1.5 G (100 mW cm⁻²), the photovoltaic test results indicated that the short-circuit photocurrent density (J_sc) of the DSSCs based four polymeric metal complexes are 11.26, 13.68, 14.42 and 15.57 mA cm⁻² and power conversion efficiency (PCE) are 5.96 %, 7.83 %, 8.07 %, 9.28 % respectively. Both J_sc and PCE value of the four polymeric metal complexes increased in order. This may be due to the fact that larger radius of metal ion under the same change number can enhance the coordination bond and cause stronger electron-withdrawing ability of auxiliary acceptor and stronger charge-transfer ability between the donor and the acceptor, which results in higher J_sc and higher PCE of the polymeric complex dye sensitizer.     

Organic dyes incorporating the benzo[1,2-b:4,5-b']dithiophene moiety for efficient dye-sensitized solar cells

A new class of organic sensitizers incorporating a benzo[1,2-b:4,5-b']dithiophene (BDT) unit as conjugated spacer has been synthesized and successfully used for dye-sensitized solar cells (DSSCs). The length of the π-conjugated spacers has a strong impact on electro-optical properties of these dyes, leading to the conversion efficiencies ranging from 4.17 to 5.68% under AM 1.5 G irradiation. This result indicates that the BDT unit is a promising candidate in organic sensitizers.     

3D Stereolithography by Using Two-Photon Photopolymerization

Summary: This article describes the development and evolution of two-photon lithography of 3-dimensional (3D) polymeric structures through two-photon photopolymerization (TPP) and the materials used to facilitate the same. The first part elaborates on the advantages of TPP over conventional lithographic techniques used in the fabrication of 3D microelectromechanical systems (MEMS). The second part introduces the preparation of highly efficient organic two-photon absorbing materials based on the centro-symmetric π-conjugated system and their performance as sensitizers in two-photon polymerization.     

Constructing organic D-A-π-A-featured sensitizers with a quinoxaline unit for high-efficiency solar cells: the effect of an auxiliary acceptor on the absorption and the energy level alignment

Four organic D-A-π-A-featured sensitizers (TQ1, TQ2, IQ1, and IQ2) have been studied for high-efficiency dye-sensitized solar cells (DSSCs). We employed an indoline or a triphenylamine unit as the donor, cyanoacetic acid as the acceptor/anchor, and a thiophene moiety as the conjugation bridge. Additionally, an electron-withdrawing quinoxaline unit was incorporated between the donor and the π-conjugation unit. These sensitizers show an additional absorption band covering the broad visible range in solution. The contribution from the incorporated quinoxaline was investigated theoretically by using DFT and time-dependent DFT. The incorporated low-band-gap quinoxaline unit as an auxiliary acceptor has several merits, such as decreasing the band gap, optimizing the energy levels, and realizing a facile structural modification on several positions in the quinoxaline unit. As demonstrated, the observed additional absorption band is favorable to the photon-to-electron conversion because it corresponds to the efficient electron transitions to the LUMO orbital. Electrochemical impedance spectroscopy (EIS) Bode plots reveal that the replacement of a methoxy group with an octyloxy group can increase the injection electron lifetime by a factor of 2.4. IQ2 and TQ2 can perform well without any co-adsorbent, successfully suppress the charge recombination from TiO(2) conduction band to I(3)(-) in the electrolyte, and enhance the electron lifetime, resulting in a decreased dark current and enhanced open circuit voltage (V(oc)) values. By using a liquid electrolyte, DSSCs based on dye IQ2 exhibited a broad incident photon-to-current conversion efficiency (IPCE) action spectrum and high efficiency (η=8.50?%) with a short circuit current density (J(sc)) of 15.65?mA?cm(-2), a V(oc) value of 776?mV, a fill factor (FF) of 0.70 under AM 1.5 illumination (100?mW?cm(-2)). Moreover, the overall efficiency remained at 97% of the initial value after 1000?h of visible-light soaking.     

Synthesis and photovoltaic properties of organic sensitizers incorporating a thieno[3,4-c]pyrrole-4,6-dione moiety

Novel organic sensitizers containing a thieno[3,4-c]pyrrole-4,6-dione (TPD) moiety with triphenylamine or julolidine as the electron donor have been designed and synthesized for quasi-solid-state dye-sensitized solar cells (DSSCs). For comparison, two organic dyes based on a terthiophene spacer have also been synthesized. The absorption, electrochemical and photovoltaic properties of all sensitizers have been systematically investigated. We found that the incorporation of TPD is highly beneficial to broaden the absorption spectra of the organic sensitizers and prevent the intermolecular interaction. Therefore, the charge recombination possibility is reduced, which is revealed by the controlled intensity modulated photovoltage spectroscopy. A quasi-solid-state DSSC based on sensitizer FNE38 with TPD and triphenylamine moieties demonstrates a solar energy conversion efficiency of 4.71% under standard AM 1.5G sunlight without the use of coadsorbant agents.     

Molecular engineering and theoretical investigation of organic sensitizers based on indoline dyes for quasi-solid state dye-sensitized solar cells

Novel indoline dyes, I-1-I-4, with structural modification of π-linker group in the D-π-A system have been synthesized and fully characterized. Molecular engineering through expanding the π-linker segment has been performed. The ground and excited state properties of the dyes have been studied by means of density functional theory (DFT) and time-dependent DFT (TD-DFT). Larger π-conjugation linkers would lead to broader spectral response and higher molar extinction coefficient but would decrease dye-loaded amount on TiO(2) electrode and LUMO level. While applied in DSSCs, the variation trends in short-circuit current density (J(sc)) and open-circuit voltage (V(oc)) were observed to be opposite to each other. The internal reasons were studied by experimental data and theoretical calculations in detail. Notably, I-2 showed comparable photocurrent values with liquid and quasi-solid state electrolyte, which suggested through molecular engineering of organic sensitizers the dilemma between optical absorption and charge diffusion lengths can be balanced well. Through studies of photophysical, electrochemical, and theoretical calculation results, the internal relations between chemical structure and efficiency have been revealed, which serve to enhance our knowledge regarding design and optimization of new sensitizers for quasi-solid state DSSCs, providing a powerful strategy for prediction of photovoltaic performances.     

新型四硫富瓦烯-三苯胺类光敏染料理论研究

在简单结构的D-π-A三苯胺光敏染料(YD1)中引入不同数量的四硫富瓦烯(TTF)单元作为次级电子给体以增强有机光敏染料的给电子能力,设计了两个结构分别为D-D-π-A (YD2)以及2D-D-π-A (YD3)的光敏染料分子,并且采用密度泛函理论(DFT)和含时密度泛函理论(TD-DFT)分别模拟计算了纯光敏剂分子及其吸附二氧化钛团簇后的几何构型、电子结构以及光物理性能。采用周期性密度泛函理论模拟计算光敏染料分子在二氧化钛(101)面吸附的表面形貌以及态密度(DOS)。计算结果表明,TTF单元的引入不仅可以有效减少光敏染料分子的团聚,还可以提升其吸收性能。此外,光吸收效率(LHE)、电子注入驱动力(ΔG^inject)以及DOS的计算结果显示,YD2和YD3理论上可以呈现出比YD1更高的短路电流密度(J_sc)以及开路电压(V_oc)。因此,通过本文的理论研究表明,TTF单元可以作为有机光敏染料中的次级电子给体来改善光敏染料的性能。     

σ versus π-radical: Tuning the electronic nature of neutral carbon (I) compounds with three non-bonding electrons

The bonding and reactivity of the hypo-coordinated compounds with one, two, and four non-bonding electrons namely, carbon-centered free radical, carbenes, and carbones were well earlier established. Here, we report stability, bonding and reactivity of compounds RCL, where R is one-electron donor group (R =  CH₃ ( a ),  CHO ( b ), and  NO₂ ( c )) and L is two-electron donor ligand (L = cAAC ( 1 ), CO ( 2 ), NHC ( 3 ) and PMe₃ ( 4 )), having three non-bonding electrons. The ground states of molecules exist in a doublet with a lone pair of electrons and an unpaired electron at the central carbon atom (C1). The spin hops over from π- to σ-type orbitals is observed as the π-acceptor strength of the donor ligand increases. The replacement of the methyl group by  CHO and  NO₂ indicate that the cAAC and  CHO substituted compounds gives a σ-radical except in compound 2c . These molecules show very high proton affinity and exothermic reaction energy for the hydrogen atom addition indicating dual reactivity namely, radical and lone pair reactivity.     

Molecular engineering of organic sensitizers for dye-sensitized solar cell applications

Novel unsymmetrical organic sensitizers comprising donor, electron-conducting, and anchoring groups were engineered at a molecular level and synthesized for sensitization of mesoscopic titanium dioxide injection solar cells. The unsymmetrical organic sensitizers 3-(5-(4-(diphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D5), 3-(5-bis(4-(diphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D7), 5-(4-(bis(4-methoxyphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D9), and 3-(5-bis(4,4'-dimethoxydiphenylamino)styryl)thiophen-2-yl)-2-cyanoacrylic acid (D11) anchored onto TiO2 and were tested in dye-sensitized solar cell with a volatile electrolyte. The monochromatic incident photon-to-current conversion efficiency of these sensitizers is above 80%, and D11-sensitized solar cells yield a short-circuit photocurrent density of 13.90 +/- 0.2 mA/cm(2), an open-circuit voltage of 740 +/- 10 mV, and a fill factor of 0.70 +/- 0.02, corresponding to an overall conversion efficiency of 7.20% under standard AM 1.5 sun light. Detailed investigations of these sensitizers reveal that the long electron lifetime is responsible for differences in observed open-circuit potential of the cell. As an alternative to liquid electrolyte cells, a solid-state organic hole transporter is used in combination with the D9 sensitizer, which exhibited an efficiency of 3.25%. Density functional theory/time-dependent density functional theory calculations have been employed to gain insight into the electronic structure and excited states of the investigated species.     

Synthesis of carboxylated chlorophyll derivatives and their activities in dye-sensitized solar cells

Chlorophyll-a derivatives possessing a carboxy group in the substituent at the 3-position were prepared by chemical modification of methyl pyropheophorbide-d bearing the 3-formyl group via a Wittig, Barbier-type, or Knoevenagel reaction. The synthetic carboxylated chlorophyll pigments were employed as dye sensitizers for solar cells and their performances were compared in a conventional device based on a mesoporous titanium dioxide electrode and a liquid electrolyte. The solar power conversion efficiency was suppressed with an increase in the length of the oligomethylene moiety between the chlorin π-system and the carboxy group, while a corresponding π-linked ethenylene spacer enhanced the efficiency.     

New difluorenylaminocoumarin photosensitizers for dye-sensitized solar cells

Research on Chemical Intermediates - Three difluorenylaminocoumarin sensitizers with different π-bridges bearing thiophene ring and cyanoacrylic acid acceptor were synthesized and their...