离子液体辅助条件下由稻壳合成超级电容器用多孔炭

本文以稻壳为碳源,以离子液体1-丁基-3-甲基咪唑六氟磷酸盐(BMIMPF₆)为模板和辅助活化剂制备了多孔炭材料（PCs）. 多孔炭的比表面积达1438 m²·g^-1,总孔容达0.75 cm³·g^-1. 以PCs为超级电容器电极材料,6 mol·L^-1的KOH溶液为电解液组装成扣式电池,在0.05 A·g^-1的电流密度下,比电容高达256 F·g^-1;当电流密度增大至10 A·g^-1,其比电容仍保持在211 F·g^-1,展现出好的倍率性能. 所得的多孔炭电极均表现出优异的循环稳定性. 这一工作以BMIMPF₆作为模板和辅助活化剂,为合成生物质基超级电容器用多孔炭提供了一种新方法.     

4-甲酰基4-苯乙烯基吡啶分子聚集行为的光谱研究

苯乙烯基吡啶化合物,由于它可能在医学方面^[1]和光电子功能材料^[2]方面有实际应用前景,已引起人们的兴趣。苯乙烯吡啶化合物的光化学性质类似于二苯乙烯化合物,在光照下可以发生顺-反异构反应^[3]、加成反应和二聚反应^[4]等不同的光化学反应。     

具有大的双光子吸收截面的A-A-A型双苯乙烯基苯类化合物的合成

合成了A-A-A型双苯乙烯基苯类化合物FR[2,5-二氰基-1,4-二(4'-氟苯乙烯基)苯],并采用核磁共振、红外光谱和元素分析等手段对其进行了表征.用飞秒脉冲诱导荧光光谱法分别研究了2个A-A-A型双苯乙烯基苯类化合物FR与CY[2,5-二氰基-1,4-二(4'-氰基苯乙烯基)苯]以及2个D-A-D型双苯乙烯基苯类化合物MO[2,5-二氰基-1,4-二(4'-甲氧基苯乙烯基)苯]和MA[2,5-二氰基-1,4-二(4'-二甲胺基苯乙烯基)苯]的单、双光子吸收与发射特性.实验结果表明,最大单光子吸收与发射波长随末端取代基供电子能力的增强而增大,末端强吸电子基化合物FR和CY具有相当高的荧光量子产率(分别为0.92与0.89)、较长的荧光寿命(分别为5.8与6.1 ns)及较大的双光子吸收系数(分别为19.1与20.5).末端带强吸电子基的化合物FR与CY的双光子吸收截面(δ,分别为6350 GM和6870 GM)比末端带供电子基的化合物MO和MA的δ(分别为270 GM与1790 GM)要大得多,表明A-A-A型双苯乙烯基苯类化合物具有异常大的δ.     

1,4-双(4′-N,N-二甲基氨基苯乙烯基)萘的合成及荧光性质

利用Wittig反应合成了一个以萘为π-Center的对称型“D-π-D”有机绿色发光化合物1,4 双(4′-N,N-二甲基氨基苯乙烯基)萘(BDASN),并测试了其在不同环境中的光谱性质.在378nm激发波长的激发下,BDASN显示出很强的荧光发射峰,峰位在521nm(CH₂Cl₂).随着溶剂极性增大,最大发射波长红移且荧光强度降低,与“D-π-A”分子具有相似的分子内电荷转移(TICT)行为.在β-环糊精(β-CD)中BDASN的绿色发光带被猝灭,同时在450nm附近蓝发光带的荧光强度骤增.     

过氧化氢激活型近红外氟硼二吡咯光敏剂的设计、合成及光动力治疗研究

基于传统的氟硼二吡咯(BODIPY)荧光染料,设计合成了一种过氧化氢(H₂O₂)激活型近红外光敏剂中位-N-(4-硼酸苄基)吡啶鎓盐取代的碘化双苯乙烯基氟硼二吡咯(FP-IBDP). FP-IBDP在乙腈中的吸收和发射波长均达到近红外区,最大吸收和发射波长分别为681 nm和740 nm,对应的荧光量子效率和单线态氧效率分别为0.01和0.09.在被H₂O₂激活后, FP-IBDP转变为IBDP,其在乙腈中的最大吸收和发射波长分别为661 nm和701 nm.与FP-IBDP相比, IBDP的荧光量子效率和单线态氧效率大幅提升,分别达到0.11和0.48.细胞水平的荧光影像实验表明FP-IBDP对癌细胞内的H₂O₂具有灵敏的响应,并能通过明显的荧光增强变化实现癌细胞与正常细胞的有效区分.活性氧检测实验证明FP-IBDP能够被癌细胞内过表达的H₂O₂激活,并能在660nm光照射下在癌细胞内产生单线态氧.噻唑蓝(MT...     

2,5-双(对二甲氨基苯乙烯基)吡嗪的双光子诱导荧光性质

本工作合成了具有D-π-A-π-D对称结构的化合物2,5-双(对二甲氨基苯乙烯基)吡嗪。利用飞秒激光器研究了2,5-双(对二甲氨基苯乙烯基)吡嗪的双光子吸收特性,获得了在820 nm处的最大双光子吸收截面(σ= 212 GM)。荧光发射强度与激发光强平方的线性关系证明了2,5-双(对二甲氨基苯乙烯基)吡嗪的双光子诱导发光机制。     

星型二苯乙烯衍生物的三光子吸收及多光子荧光发射

用飞秒Ti:sapphire激光测定了星型二苯乙烯衍生物2,5-二{4-{2-N,N-二[4-(2-N,N-二苯基氨基苯乙烯基)苯基]氨基苯乙烯基}苯基}-1,3,4-噁二唑(DPASPO)和1,2,4,5-四(4-N,N-二苯氨基苯乙烯基)苯(PASB)的三光子吸收谱和多光子上转换荧光光谱. 研究了星形八极矩分子DPASPO和PASB的线性吸收、单光子荧光及荧光寿命. 在800 nm波长的飞秒激光激发下, DPASPO和PASB在二氯甲烷溶液中发出很强的黄绿色双光子上转换荧光, 荧光峰分别位于583 nm和547 nm. 在1260 nm波长的飞秒激光激发下, DPASPO和PASB的三光子上转换荧光峰分别位于612 nm和572 nm. 采用非线性透过率法测得DPASPO和PASB最大三光子吸收截面分别为16.69×10^－79 cm⁶•s²和6.81×10^－79 cm⁶•s². 这些二苯乙烯衍生物的三光子吸收截面较大. 在这些星型分子中, 三光子吸收增强来源于二苯乙烯分支的增加, 共轭体系的扩展以及分子内跨越空间电荷离域.     

十二烷基硫酸钠辅助制备高电容性能多孔碳

本工作通过一步水浴法制备高氮/氧含量密胺树脂(MF), 引入阴离子型表面活性剂十二烷基硫酸钠(SDS)改变聚合物的反应历程, 使进入SDS胶束中的三聚氰胺与甲醛在盐酸催化条件下进行聚合反应, 高温碳化后成功制备MF衍生多孔碳材料. 对MF衍生多孔碳材料分别进行了扫描电镜、比表面积等表征, 结果表明, 其具有多孔互穿网络结构, 比表面积高达387.86 m²?g^-1, 且孔径分布适宜(3.62 nm). 作为超级电容器(SCs)电极材料, 在1.0 A?g^-1下的比电容值为349.6 F?g^-1, 20.0 A?g^-1时(254.6 F?g^-1)仍能维持1.0 A?g^-1时73.0%的电容保持率, 倍率性能优异. 该样品在10.0 A?g^-1下循环15000次后的比电容值几乎没有衰减, 循环稳定性能优越. 此研究结果表明SDS可辅助提升MF衍生多孔碳材料的电容性能, 发展潜力巨大.     

2,4和8-支噁二唑衍生物的三光子吸收和三光子上转换荧光

用飞秒Ti:sapphire激光测定了3个对称噁二唑衍生物4-{N,N-双[4-(4-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]苯乙烯基)苯基]氨基}苯甲醛(Bis-oxa)、2,5-双{4-[2-N,N-双(4-{4-[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]苯乙烯基}苯基)氨基苯乙烯基]苯基}-1,3,4-噁二唑(Quadri-oxa)和2,5-双(4-{2-N,N-双[({3,5-二[5-(4-叔丁基苯基)-1,3,4-噁二唑-2]苯基}乙烯基)苯基]氨基苯乙烯基}苯基)-1,3,4-噁二唑(Octu-oxa)的三光子吸收谱和三光子荧光光谱. 在1260 nm飞秒激光激发下, 2,4和8-支噁二唑衍生物的三光子吸收系数分别为5.0×10^-5, 10.0×10^-5和10.0×10^-5 cm³/GW², 三光子频率上转换荧光发射波长分别为533, 544和551 nm. 研究了多支化合物线性吸收和透过、单光子荧光及量子产率、荧光寿命、多光子荧光光谱和三光子吸收系数谱. 对称多支噁二唑衍生物具有很强的三光子吸收和上转换荧光性质.     

共轭微孔聚合物多孔硬炭的KOH活化碳化与储锂性能

以1,3,5-三乙炔基苯为单体自聚合成了共轭微孔聚合物（CMP）,经直接碳化、KOH活化碳化分别制备了多孔硬炭（PHC）和KOH活化多孔硬炭（K-PHC）。用SEM、N₂吸附-脱附测试对K-PHC和PHC形貌结构进行了分析。K-PHC具有丰富的孔结构和较大的比表面积（1234.5 m²·g^-1）。恒流充放电测试表明：K-PHC的首次充放电比容量为972.1和2438.2 mAh·g^-1; 0.6 A·g^-1电流密度下循环300次,仍可达到627.2 mAh·g^-1的高比容量。      

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Microwave-assisted copper-catalyzed stereoselective ring expansion of three-membered heterocycles with α-diazo-β-dicarbonyl compounds

Microwave-assisted copper-catalyzed ring expansions of three-membered heterocycles with α-diazo-β-dicarbonyl compounds were investigated. Thiiranes generated 3-acyl-5,6-dihydro-1,4-oxathiines in the presence of copper sulfate and trans-3-acyl-5,6-dihydro-1,4-oxathiines as stereospecific products for 1,2-disubstituted cis-thiiranes through an intramolecular S_N2 process. Oxiranes gave rise to 2-acyl-5,6-dihydro-1,4-dioxines under the catalysis of copper hexafluoroacetylacetonate and cis-3-acyl-5,6-dihydro-1,4-dioxines as stereospecific products for 1,2-disubstituted cis-oxiranes via an intimate ion-pair mechanism. The current method provides a direct and simple strategy in efficient preparation of 3-acyl-5,6-dihydro-1,4-oxathiines and 2-acyl-5,6-dihydro-1,4-dioxines, important agents in medicinal and agricultural chemistry, from readily available thiiranes and oxiranes, respectively.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.