Raman spectroscopy of graphene and carbon nanotubes

This paper reviews progress that has been made in the use of Raman spectroscopy to study graphene and carbon nanotubes. These are two nanostructured forms of sp² carbon materials that are of major current interest. These nanostructured materials have attracted particular attention because of their simplicity, small physical size and the exciting new science they have introduced. This review focuses on each of these materials systems individually and comparatively as prototype examples of nanostructured materials. In particular, this paper discusses the power of Raman spectroscopy as a probe and a characterization tool for sp² carbon materials, with particular emphasis given to the field of photophysics. Some coverage is also given to the close relatives of these sp² carbon materials, namely graphite, a three-dimensional (3D) material based on the AB stacking of individual graphene layers, and carbon nanoribbons, which are one-dimensional (1D) planar structures, where the width of the ribbon is on the nanometer length scale. Carbon nanoribbons differ from carbon nanotubes is that nanoribbons have edges, whereas nanotubes have terminations only at their two ends.     

Conductivity of double-walled carbon nanotubes at pressures of up to 30 GPa

Results from experimental studies of the electrical resistance of double-walled carbon nanotubes (DWNTs) in conducting diamond high-Pressure chambers at pressures of up to 30 GPa and room temperature are presented. The effect pressure has on the structure of the outer and inner tubes is analyzed. Ranges of pressure are found in which the electrical resistance of DWNTs changes considerably.     

Carbon systems of polymerized nanotubes: Crystal and electronic structures

Molecular dynamic calculations are carried out for the (P, T) phase diagram of a covalent compound of cross-linked carbon single-wall nanotubes (SWNT) and for the structures and electronic spectra of the novel crystals of polymerized carbon nanotubes. It is shown that the transformation of covalently bonded nanotubes in a close-packed conducting structure cardinally modifies their electronic properties. The P-SWNT crystal becomes semiconducting and, upon complete transformation of sp ²-hybridized carbon atoms into sp ³-hybridized ones, it becomes an insulator.     

Mechanical properties and structures of bulk nanomaterials based on carbon nanopolymorphs

Bulk nanomaterials based on sp² carbon nanopolymorphs are promising candidates for supercapacitors due to their unique properties such as extremely high specific surface area, high conductivity and stability against graphitization. However, the mechanical response of such materials to external loading is not understood well. This Letter studies the effect of hydrostatic pressure on the mechanical properties and structures of these materials via molecular dynamics simulations. Three types of nanopolymorphs‐based nanomaterials that are composed of bended graphene flakes, short carbon nanotubes and fullerenes are considered. It is found that these three materials show a distinct relation between the pressure and volume strain. Moreover, their resistance to graphitization depends on the structure of their constituent components. The phenomena are explained by analysing the radial distribution function and coordination numbers of the atoms. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Exploring the possible interlinked structures in single‐wall carbon nanotubes under pressure by Raman spectroscopy

High‐pressure Raman measurements on single‐wall carbon nanotubes (SWNTs) have been carried out in a diamond anvil cell by using two wavelength lasers: 830 and 514.5 nm. Irrespective of using a pressure transmitting medium (PTM) or not, we found that nanotubes undergo similar transformations under pressure. The pressure‐induced changes in Raman signals at around 2 and 5 GPa are attributed to the nanotube cross‐section transitions from circle to ellipse and then to a flattened shape, respectively. Especially with pressure increasing up to 15–17 GPa, we observed that the third transition takes place in both the Raman wavenumber and the linewidth of G‐band. We propose explanations that the interlinked configuration with sp³ bonds forms in the bundles of SWNTs under pressure, which was the cause for the occurrence of those Raman anomalies, similar to the structural‐phase transition of graphite above 14 GPa. Our TEM observations and Raman measurements on the decompressed samples support this transition picture. Copyright © 2012 John Wiley & Sons, Ltd.     

Crossed graphene: Stability and electronic structure

Carbon has always attracted attention due to its rich chemistry and the almost complementary properties of the natural phases graphite and diamond. While graphite is a highly anisotropic semi‐metal, diamond shows high hardness and thermal conductivity and is a wide‐gap insulator. With the discovery of graphene, fullerenes, and carbon nanotubes which resemble properties of the two crystalline phases, research on those and novel carbon materials emerged. Since carbon is forming different covalent bonds, there is a multitude of possibilities to create new structures by just combining sp, sp², and sp³ bonded carbon. Here we report on the discovery of a new sp² and sp³ bonded carbon structure which can be seen as a crossed graphene structure providing hybrid properties of graphene and diamond by means of an evolutionary algorithm.

     

Characterization of fluorinated multiwalled carbon nanotubes by x-ray absorption spectroscopy

The C 1s and F 1s x-ray absorption spectra of fluorinated multiwalled carbon nanotubes with different fluorine contents and reference compounds (highly oriented pyrolytic graphite crystals and “white” graphite fluoride) were measured using the equipment of the Russian-German beamline at the BESSY II storage ring with a high energy resolution. The spectra obtained were analyzed with the aim of characterizing multiwalled carbon nanotubes and their products formed upon treatment of the nanotubes with fluorine at a temperature of 420°C. It was established that, within the probing depth (～15 nm) of carbon nanotubes, the process of fluorination occurs uniformly and does not depend on the fluorine concentration. The interaction of fluorine atoms with multiwalled carbon nanotubes in this case proceeds through the covalent attachment of fluorine atoms to graphene layers of the graphite skeleton and is accompanied by a change in the hybridization of the 2s and 2p valence electron states of the carbon atom from the trigonal (sp ²) to tetrahedral (sp ³) hybridization.     

Transport of liquid mercury under pressure in double-walled carbon nanotubes

In this paper, transport of liquid mercury under pressure through double-walled carbon nanotubes is studied using classical molecular dynamics simulations in conjunction with a pressure control model. The results indicate that wetting of double-walled carbon nanotubes by mercury occurs above a threshold pressure of liquid mercury. Liquid mercury can be transported through the inner tube of double-walled carbon nanotubes with the continuous increase of its pressure. The threshold pressure of liquid mercury decreases and the transport efficiency increases greatly with enlarging the inner tube size. The space between the two walls of double-walled carbon nanotubes can also transport the liquid mercury while the distance between the two walls is much larger than the radius of the inner tube. Transport efficiency of double-walled carbon nanotubes is a little lower than that of single-walled carbon nanotubes while double-walled carbon nanotubes transport liquid more steadily than single-walled carbon nanotubes.     

Free standing double walled boron nanotubes

Based on density functional calculations we propose stable structures of free standing double walled boron nanotubes in the form of two single walled boron nanotubes (SWBNTs) inside one another. Puckering of the boron sheets allows the inner atoms of the outer wall and outer atoms of the inner wall to be matched giving sp-type hybrid σ bonding between the walls. The structural stability, in the case of double walled tubes, increases as the bond interaction between the walls strengthens. All the optimized structures reported in this study are electronically conducting in good agreement with the previously calculated metallic behavior of the experimentally observed SWBNTs.     

Calculation of the structure of carbon clusters based on fullerene-like C<Subscript>24</Subscript> and C<Subscript>48</Subscript> molecules

Equilibrium structures obtained by linking with valence bonds the carbon carcasses of two fullerene-like molecules have been studied by molecular dynamics simulation. In free fullerene, carbon atoms form sp² hybridized bonds, but at places of links between fullerenes, sp³ hybridized bonds are formed, which determines the changes in the properties of such structures. In the literature, the topology of diamond-like phases is described, but equilibrium clusters based on fullerene-like molecules are underexplored. The right angles between the C–C bonds are energetically unfavorable, and the reduction in the energy of clusters in the process of relaxation is connected with the optimization of valence angles, which leads to a reduction in the symmetry of clusters and, in a number of cases, even to disruption of some valence bonds. It is shown that different fashions of linking two fullerenes result in the formation of clusters with different structures and energies. Different initial conditions can lead to different configurations of clusters with the same topology. Among the analyzed clusters, a structure with the minimum potential energy per atom was found. The results of this work contribute to the study of the real structure of carbon clusters.     

Molecular dynamics simulations of electrowetting in double-walled carbon nanotubes

On the basis of the atomistic simulations of electrowetting in single-walled carbon nanotubes, electrowetting of double-walled carbon nanotubes by mercury is studied using classical molecular dynamics simulations. Wetting of double-walled carbon nanotubes by mercury occurs above a threshold size of inner tube when the voltage is applied on the outer tube, but no wetting phenomenon appears when the voltage is applied on the inner tube. The filling rate increases greatly with enlarging the inner tube size. The space between the two walls of double-walled carbon nanotubes cannot be filled by mercury during electrowetting process.     

Si表面间水平碳纳米管束的分子动力学模拟研究

本文采用分子动力学模拟方法研究了Si表面间单壁水平碳纳米管束SWCNT (10,10)的变形和摩擦特性.系统在弛豫平衡后,首先对碳纳米管束施加压力至碳纳米管或Si表面结构破坏.之后在无压力和高压力两种情况下使上表面沿水平方向做剪切运动以研究碳纳米管束的摩擦特性.结果表明,由于碳纳米管的柔韧性,碳纳米管束在加载过程中出现明显变形,但直至3.8 GPa高压下并无结构破坏.系统无压力时SWCNT (10,10)在原地轻微随机滚动,压力为3.8 GPa时,碳纳米管束出现了整体的轻微滑动,同时伴随无规律的轻微滚动, 关键词： 碳纳米管束 摩擦 分子动力学模拟     

X-Ray Spectral Studies of the Interface Interaction in CuO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>/MWCNTs Nanocomposite

Results of a comprehensive study of the interface interaction of a nanostructured CuO_x and multiwalled carbon nanotubes (MWCNTs) in CuO_x/MWCNT nanocomposite by X-ray absorption spectroscopy (XANES, NEXAFS) and X-ray photoelectron spectroscopy (XPS) methods using a synchrotron radiation are presented. It is established that a nanostructured CuO_x in CuO_x/MWCNT nanocomposite is predominantly formed by CuO and has the form of flakelike particles 200–500 nm in size uniformly dispersed over an array of nanotubes. A chemical interaction of CuO_x and nanotubes with formation of covalent carbon–oxygen bonds, which does not lead to a significant destruction of the outer layers of carbon nanotubes, is observed at the interfaces of the nanocomposite.     

Frequency change by inter-walled length difference of double-wall carbon nanotube resonator

Ultrahigh frequency nanomechanical resonators based on double-walled carbon nanotubes with different wall lengths were investigated via classical molecular dynamics simulations. For a double-walled carbon nanotube resonator with a short outer wall, the free edge of the short outer wall plays an important role in the vibration of the long inner wall. For a double-walled carbon nanotube resonator with a short inner wall, the short inner wall can be considered as a flexible core, thus, the fundamental frequency is influenced by its length. By controlling the length of the inner or outer wall, various frequency devices can be realized by a single type of double-walled carbon nanotube with walls of equal length.     

Laser fluence dependence of the elastic properties of diamond-like carbon films prepared by pulsed-laser deposition

We studied the temperature dependence of internal friction of variety of amorphous diamond-like carbon films prepared by pulsed-laser deposition. Like the most of amorphous solids, the internal friction below 10 K exhibits a temperature independent plateau, which is caused by the atomic tunnelling states—a measure of structure disorder. In this work, we have varied the concentration of sp³ versus sp² carbon atoms by increasing laser fluence from 1.5 to 30 J/cm². Our results show that the internal friction has a nonmonotonic dependence on sp³/sp² ratio with the values of the internal friction plateaus varying between 6×10⁻⁵ and 1.1×10⁻⁴. We explain our findings as a result of a possible competition between the increase of atomic bonding and the increase of internal strain in the films, both of which are important in determining the tunneling states in amorphous solids. The importance of the internal strain in diamond-like carbon films is consistent with our previous study on laser fluence, doping, and annealing, which we will review as well. In contrast, no significant dependence of laser fluence is found in shear moduli of the films, which vary between 220 and 250 GPa.     

Pressure- and temperature-induced transformations in crystalline polymers of C60

The great advantage of the C₆₀ molecule is its potential for polymerization, due to which the molecule can be the building block of new all carbon materials. In addition, it contains, both sp ² and sp ³ hybridized carbon atoms, which allows synthesizing new carbon materials with desired physicochemical properties using both types of carbon bonding. The one- and two-dimensional polymeric phases of C₆₀ are prototype materials of this sort. Their properties, especially polymerization under pressure and room temperature via covalent bonding between molecules belonging to adjacent polymeric chains or polymeric layers, can be used for further development of new materials. The present review focuses on the study of the pressure-induced polymerization and thermodynamic stability of these materials and their recovered new phases by in-situ high-pressure Raman and X-ray diffraction studies. The phonon spectra show that the fullerene molecular cage in the high-pressure phases is preserved, while these polymers decompose under heat treatment into the initial fullerene C₆₀ monomer.     

Growth and annealing study of hydrogen-doped single diamond crystals under high pressure and high temperature

A series of diamond crystals doped with hydrogen is successfully synthesized using LiH as the hydrogen source in a catalyst-carbon system at a pressure of 6.0 GPa and temperature ranging from 1255 C to 1350 C.It is shown that the high temperature plays a key role in the incorporation of hydrogen atoms during diamond crystallization.Fourier transform infrared micro-spectroscopy reveals that most of the hydrogen atoms in the synthesized diamond are incorporated into the crystal structure as sp 3-CH 2-symmetric(2850 cm-1) and sp 3 CH 2-antisymmetric vibrations(2920 cm-1).The intensities of these peaks increase gradually with an increase in the content of the hydrogen source in the catalyst.The incorporation of hydrogen impurity leads to a significant shift towards higher frequencies of the Raman peak from 1332.06 cm-1 to 1333.05 cm-1 and gives rise to some compressive stress in the diamond crystal lattice.Furthermore,hydrogen to carbon bonds are evident in the annealed diamond,indicating that the bonds that remain throughout the annealing process and the vibration frequencies centred at 2850 and 2920 cm-1 have no observable shift.Therefore,we suggest that the sp 3 C-H bond is rather stable in diamond crystals.     

Effect of pulsed ion irradiation on the electronic structure of multi-walled carbon nanotubes

The effect of pulsed ion irradiation and vacuum annealing on the ratio of sp ²- and sp ³-hybridized orbitals of carbon atoms in the layers of oriented multi-walled carbon nanotubes has been studied by analyzing the photoemission spectra of the C1s core level and the valence band of carbon, which were obtained using the equipment of the BESSY II Russian-German beamline of synchrotron radiation and a Riber analytical system. It has been shown that the ion irradiation leads to a significant decrease in the fraction of atoms with the sp ³ hybridization of electrons. On the contrary, the annealing reduces the fraction of the sp ³-component in the spectra of carbon. Typical features of the valence band of multi-walled carbon nanotubes in the annealed and irradiated states have been established.     

Allotropic forms of carbon in the Invar Fe–Ni–C alloy before and after plastic deformation by upsetting

The effect of cold plastic deformation by upsetting (e = 1.13) on structure and hybridised bonds of carbon in the fcc Invar Fe-30.9%Ni-1.23% C alloy was studied by means of X-ray phase analysis and X-ray photoelectron spectroscopy. Carbon precipitates along grain boundaries and inside of grains in the alloy after annealing and plastic deformation were revealed. The presence of mainly sp²- and sp³-hybridised C–C bonds attributing to graphite and amorphous carbon as well as the carbon bonds with impurity atoms and metallic Fe and Ni atoms in austenitic phase were revealed in the annealed and deformed alloy. It was shown for the first time that plastic deformation of the alloy results in partial destruction of the graphite crystal structure, increasing the relative part of amorphous carbon, and redistribution of carbon between structural elements as well as in a solid solution of austenitic phase.     

A new carbon allotrope with C28 cage: T-C64

A new tetragonal carbon allotrope (named T-C₆₄) is predicted by swarm structural searches combined with first principles calculation. It contains 64 carbon atoms in a Tetragonal unit cell with I4₁/amd symmetry and exhibits distinct topologies including C28 cages. This new carbon phase has an sp²-sp³ network with calculated hardness of 68.2 GPa. In order to examine the stability of T-C₆₄ under ambient pressure, we calculated the properties of elastic constant and phonon spectrum. In addition, by calculating the electronic properties of the crystal, it is concluded that T-C₆₄ is an indirect band gap semiconductor with a band gap of 2.23 eV.