金属氧化物对聚丙烯膨胀阻燃体系阻燃性能的影响

将Bi2O3、Sb2O3、SnO2添加到聚磷酸铵(APP)和双季戊四醇(DPER)膨胀型阻燃聚丙烯(PP)体系中,采用氧指数(OI)、热分析(TGA)、热红联用(TG-FTIR)和扫描电镜(SEM),考察它们对膨胀阻燃体系的催化协效作用,探讨其作用机理.结果表明,3种金属氧化物在适量的添加下都可以提高体系的氧指数.TG结果表明,Bi2O3的加入可以提高膨胀炭层在高温时的热稳定性,增加高温时残余物的量;TG-FTIR结果显示添加Bi2O3后,膨胀阻燃剂在热分解过程中,气体的释放过程发生了改变.膨胀炭层的SEM图表明,Bi2O3可以改善膨胀炭层的形貌,提高炭层的隔热隔质性能.0.1 wt%的Bi2O3和1 wt%的纳米黏土复配用于膨胀阻燃体系中,可以在阻燃剂添加20份下,样品氧指数达到28.3;在阻燃剂添加25时,样品(3.2 mm)通过UL-94 V-0级.0.1 wt%的Bi2O3和1 wt%纳黏粘土的添加,还可以提高体系的力学性能.     

Effects of zinc and nickel salts in intumescent flame-retardant polypropylene

Variable amounts of zinc and nickel salts, such as ZnSO₄·7H₂O and NiSO₄·6H₂O, have been incorporated into blends of polypropylene (PP)/ammonium polyphosphate (APP)/dipentaerythritol (DPER) with the aim of studying their effect on intumescent flame retardance (IFR). The PP/IFR/salt composites have been prepared using a twin-screw extruder, and their IFR behaviours have been evaluated through limiting oxygen index (LOI), vertical burning tests (UL-94), and cone calorimeter tests (CONE). The results show that, at an appropriate level, zinc and nickel salts can increase the LOI and decrease the heat release rate (HRR). The composites have been studied with the aid of thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The flame-retardant mechanism of the PP/IFR/salts system is also discussed in terms of catalytic charring. ZnSO₄·7H₂O has been shown to be the most effective among the aforementioned metal salts, which has proved to be strongly associated with its low melting point and the interaction between DPER and SO₄²⁻.     

海泡石对膨胀阻燃聚丙烯燃烧和热分解的影响

将改性后的海泡石添加到聚磷酸铵(APP)和双季戊四醇(DPER)膨胀阻燃聚丙烯(PP/IFR)体系中,采用氧指数(LOI)、热重分析(TGA)、光电子能谱(XPS)、傅里叶变换红外(FTIR)光谱、锥形量热仪(CONE)和扫描电镜(SEM)考察其对膨胀阻燃体系的催化协效作用,探讨作用机理.LOI结果表明,改性的海泡石比纳米水滑石和有机改性的蒙脱土有更好的催化协效作用.CONE数据证实,海泡石可以降低膨胀阻燃聚丙烯体系的热释放速率和总的热释放量.通过观察SEM图片发现,海泡石可以改善膨胀炭层的形貌,提高炭层的隔热隔质性能.TGA结果表明,在氮气和空气气氛下,海泡石均可以提高膨胀炭层的热稳定性,增加高温时残余物的量,其主要作用对象为APP.FTIR和XPS测试发现加热过程中海泡石可以与APP发生化学反应,形成P—O—Si键,增加了APP高温时的稳定性.     

Combined effect of transition metal phosphide (MxPy,M = Ni,Co, and Cu) and intumescent flame retardant system on polypropylene

In this paper, three typical transition metal phosphide nanocrystallines (M_xP_y, M = Ni, Co, and Cu) were synthesized by a novel hydrothermal method, and their structures were characterized by X‐ray diffraction and transmission electron microscopy. Then they were used as synergistic agents with intumescent flame retardant (IFR) to improve the fire safety of polypropylene (PP). Thermogravimetry analysis (TGA) results indicated that the introduction of these synergists could improve the thermal stability and char yields of the PP/IFR system. The addition of 2 wt.% Ni₁₂P₅ and Co₂P increased the limiting oxygen index values of the PP/IFR system significantly from 28% to 36% and 34%, respectively, and the system could reach V‐0 rating. The cone calorimeter test results revealed that the combination of transition metal phosphide nanocrystallines and IFR system could result in excellent flame retardancy. The incorporation of these synergists into IFR led to a remarkable influence on charring of PP composites as revealed by TGA and cone data. The morphological structure of char residue proved that the addition of transition metal phosphide nanocrystallines was capable of forming a compact and homogeneous char on the surface, which turned out to be of most importance for the flame retardancy. Thermogravimetric analysis/infrared spectrometry results indicated that the flame retardant mechanism of PP/IFR/M_xP_y (M = Ni, Co, and Cu) system was in the condensed phase rather than in the gas phase. Copyright © 2014 John Wiley & Sons, Ltd.     

Microencapsulated Ammonium Polyphosphate with Polyurethane Shell: Application to Flame Retarded Polypropylene/Ethylene-propylene Diene Terpolymer Blends

Microencapsulated ammonium polyphosphate with polyurethane resin (PUMAPP) was prepared by in situ polymerization and characterized by X-ray photoelectron spectroscopy (XPS). The flame retardation of PUMAPP/dipentaerythritol(DPER) and ammonium polyphosphate (APP)/DPER flame retarded polypropylene (PP)/ethylene propylene diene rubber (EPDM) composites were studied using limiting oxygen index (LOI), UL-94 test and cone calorimeter. Results demonstrated that the flame retardancy of the PP/EPDM/PUMAPP/DPER composites was better than that of the PP/EPDM/APP/DPER composites at the same additive loading. Real time Fourier transform infrared (FTIR) and thermogravimetric analysis (TG) were used to study the thermal degradation and stability of the PP/EPDM/PUMAPP/DPER composite. The hydrolytic stability of the flame retarded PP/EPDM composites was studied. It was found that the microencapsulation of APP with the PU resin leaded to a decrease in the particle's water solubility. Moreover, the synergistic effect of vinyltrimethoxysilane (VTMS) on the PP/EPDM/PUMAPP/DPER composite was also investigated.     

Effect of anion of polyoxometalate based organic–inorganic hybrid material on intumescent flame retardant polypropylene

In this work, 12‐tungestocobaltic acid based organic–inorganic hybrid material, [Bmim]₆CoW₁₂O₄₀ (CoW) was synthesized and applied as a synergist in polypropylene (PP)/intumescent flame retardant (IFR) composites. The flame retardant properties were investigated by the limiting oxygen index (LOI), UL‐94 vertical burning test, thermal gravimetric analyzer (TGA), cone calorimeter and scanning electron microscopy (SEM) etc. The results showed that the PP composites with 16 wt% IFR and 1 wt% CoW achieves the UL‐94 V‐0 rating and gets a LOI value 28.0. However, only add no less than 25 wt% single IFR, can the PP composites obtain the UL‐94 V‐0 rating, which suggests that CoW has good synergistic effects on flame retardancy of PP/IFR composites. In addition, the SEM and cone calorimeter tests indicated the CoW improves the quality of char layer. The rate of char formation has been enhanced also because of the existence of CoW. It is the combination of a better char quality and a high rate of char formation promoted by CoW that results in the excellent flame retardancy of PP/IFR composites. Copyright © 2016 John Wiley & Sons, Ltd.     

Synergistic effect of cocondensed nanosilica in intumescent flame‐retardant polypropylene

Amino‐functionalized nanosilica (SiO₂‐NH₂) was prepared through cocondensation method using aminopropyltriethoxysilane as comonomer to hydrolyze and cocondense with tetraethylorthosilicate. The synergistic effect of combination of ammonium polyphosphate and pentaerythritol with SiO₂‐NH₂ on the thermal and flame‐retardant properties of intumescent flame‐retardant (IFR) polypropylene (PP) has been investigated by thermogravimetric analysis (TGA), scanning electron microscopy, Raman spectra, X‐ray diffraction (XRD), limiting oxygen index (LOI), and UL 94 tests. When 1.0 wt.% SiO₂‐NH₂ was added, the LOI value of the PP/IFR composite with 25 wt.% of IFR increased from 26.6% to 31.7%, while the UL 94 rating raised from not classified to V‐0. The TGA data demonstrated that the SiO₂‐NH₂ nanoparticles increased the charred residue of the PP/IFR composites. The morphological structures and the orderliness of the charred residue proved that SiO₂‐NH₂ promoted the formation of compact intumescent charred layer, which effectively protected the underlying polymer from burning. The XRD patterns of the charred residue indicated that nanosilica reacted with APP to form SiP₂O₇ crystal structure during combustion, which was beneficial to the formation of compact charred layers. In comparison with the inorganic SiO₂‐cal nanoparticles, the amino‐functionalized nanosilica revealed much more efficient synergistic flame‐retardant effect due to the difference of surface properties.     

Synthesis of a novel ionic liquid containing phosphorus and its application in intumescent flame retardant polypropylene system

A novel ionic liquid containing phosphorus ([PCMIM]Cl) was synthesized and characterized by FTIR, ¹H NMR, ¹³C NMR and ³¹P NMR. Moreover, a new intumescent flame retardant (IFR) system, which was composed of [PCMIM]Cl and ammonium polyphosphate (APP), was used to impart flame retardancy and dripping resistance to polypropylene (PP). The flammability and thermal behaviors of intumescent flame‐retarded PP (PP/IFR) composites were evaluated by limiting oxygen index (LOI), UL‐94 test, thermogravimetric analysis (TGA) and cone calorimeter test. It was found that there was an obvious synergistic effect between [PCMIM]Cl and APP. When the weight ratio of [PCMIM]Cl and APP was 1:5 and the total amount of IFR was kept at 30 wt%, LOI value of PP/IFR composite reached 31.8, and V‐0 rating was obtained. Moreover, both the peak heat release rate and the peak mass loss rate of PP/IFR composites decreased significantly relative to PP and PP/APP composite from cone calorimeter analysis. The TGA curves suggested that [PCMIM]Cl had good ability of char formation, and when combined with APP, it could greatly promote the char formation of PP/IFR composites, hence improved the flame retardancy. Additionally, the rheological behaviors and mechanical properties of PP/IFR composites were also investigated, and it was found that [PCMIM]Cl could also serve as an efficient lubricant and compatibilizer between APP and PP, endowing the materials with satisfying processability and mechanical properties. Copyright © 2013 John Wiley & Sons, Ltd.     

Synergistic effects of ferric pyrophosphate (FePP) in intumescent flame‐retardant polypropylene

Ferric pyrophosphate (FePP) was added to an ammonium polyphosphate (APP)—pentaerythritol (petol) intumescent flame retardant (IFR) system in polypropylene (PP) matrix, with subsequent investigation into the synergistic effect between FePP and the IFRs. Limited oxygen index (LOI), UL‐94 test and cone calorimeter test were employed to study the flame retardance of the synthesized flame retardant PP composites. Thermogravimetric analysis (TGA) and thermogravimetric analysis‐infrared spectrometry (TG‐IR) were used to study their thermal degradation characteristics and gas products. TG‐IR results demonstrate that there is no Fe (CO)₅ produced from PP/IFR/FePP system, which implies that the flame retardant mechanism of PP/IFR/FePP system is in the condensed phase rather than in the gas phase. Real time FTIR and X‐ray photoelectron spectroscopy (XPS) were used to monitor the thermal oxidative stability and the high temperature performance of the flame retardant PP composites. The real time FTIR spectra show that all peaks around 2900 cm^?1 almost disappear at 380°C for the PP/IFR system, meaning that PP decomposes completely at this temperature. But after the addition of 2 wt%wt% FePP, the peaks still exist till 400°C. XPS shows that the aliphatic carbon atom content in PP/23 wt%wt% IFR/2 wt%wt% FePP (63.8%) is much higher than the one without FePP, and the total oxygen atom content in PP/23 wt%wt% IFR/2 wt%wt% FePP is just 19.1%, while the one in PP/25 wt% IFR is as high as 35.7%. Copyright © 2009 John Wiley & Sons, Ltd.     

The synergistic flame‐retardant effect of O‐MMT on the intumescent flame‐retardant PP/CA/APP systems

The flame retardancy of a novel intumescent flame‐retardant polypropylene (IFR‐PP) system, which was composed of a charring agent (CA), ammonium polyphosphate (APP), and polypropylene (PP), could be enhanced significantly by adding a small amount (1.0 wt%) of an organic montmorillonite (O‐MMT). The synergistic flame‐retardant effect was studied systematically. The thermal stability and combustion behavior of the flame‐retarded PP were also investigated by thermogravimetric analysis (TGA), limiting oxygen index (LOI), vertical burning test (UL‐94), scanning electronic microscopy (SEM), and cone calorimeter test (CCT). TGA results demonstrated that the onset decomposition temperatures of IFR‐PP samples, with or without O‐MMT, were higher than that of neat PP. Compared with IFR‐PP, the LOI value of IFR‐PP containing 1.0 wt% O‐MMT was increased from 30.8 to 33.0, and the UL‐94 rating was also enhanced to V‐0 from V‐1 when the total loading of flame retardant was the same. The cone calorimeter results showed that the IFR‐PP with 1.0 wt% of O‐MMT had the lowest heat release rate (HRR), total heat release (THR), total smoke production (TSP), CO production (COP), CO₂ production (CO₂P), and mass loss (ML) of all the studied IFR‐PP samples, with or without O‐MMT. All these results indicated that O‐MMT had a significantly synergistic effect on the flame‐retardancy of IFR‐PP at a low content of O‐MMT. Copyright © 2009 John Wiley & Sons, Ltd.     

Joint‐aggregation intumescent flame‐retardant effect of ammonium polyphosphate and charring agent in polypropylene

In order to explore the structure mode of intumescent flame retardants (IFRs) with higher efficiency, IFR particles with joint‐aggregation structure (@IFR) were obtained through the treatment of ammonium polyphosphate (APP) and a charring agent (PT‐Cluster) in their aqueous solution. Then, the joint‐aggregation IFR effect was researched using its application in polypropylene. In case of 20 wt% IFR loading, the limiting oxygen index (LOI) value of @IFR/PP was 1.1% higher than that of 15APP/5PT‐Cluster/PP mixture, and a 1.6 mm‐thick @IFR/PP composite passed the UL 94 V‐2 rating test, while 15APP/5PT‐Cluster/PP demonstrated no flame‐retardant rating in UL 94 vertical burning tests. In a cone calorimeter test, @IFR also had a better inhibition effect on heat release. The average heat release rate (av‐HRR) value during 0 to 120 seconds of @IFR/PP was only 41 kW m^?2, which was 33.9% lower than that of the 15APP/5PT‐Cluster/PP. Furthermore, the peak heat release rate (pk‐HRR) of @IFR/PP was 20.5% lower than that of 15APP/5PT‐Cluster/PP, and the time to pk‐HRR of @IFR/PP was 710 seconds, while that of 15APP/5PT‐Cluster/PP was 580 seconds. The better inhibition effect on HRR and the delay of time to pk‐HRR were caused by the joint‐aggregated structure of @IFR, which can rapidly react to form stable and efficient char layers. This kind of join‐aggregation IFR effect has great significance in suppressing the spread of fire in reality. In addition, @IFR also increased the mechanical properties of PP composites slightly compared with the APP/PT‐Cluster mixture.     

An investigation into synergistic effects of rare earth oxides on intumescent flame retardancy of polypropylene/poly (octylene‐co‐ethylene) blends

Synergistic effects of two kinds of rare earth oxides (REOs), neodymium oxide (Nd₂O₃) or lanthanum oxide (La₂O₃) on the intumescent flame retardancy of thermoplastic polyolefin (TPO) made by polypropylene/poly (octylene‐co‐ethylene) blends were investigated systemically by various methods. The limiting oxygen index (LOI) of flame retardant TPO (FRTPO) filled by 30 wt% intumescent flame retardants (IFR) composed of ammonium polyphosphate (APP) and pentaerythritol (PER) has been increased from 30 to 32.5 and 33.5 when 0.5 wt% of IFR was substituted by La₂O₃ and Nd₂O₃, respectively. Cone calorimetry tests also reveal the existence of synergistic effects. Thermalgravimetric analyses (TGA) demonstrate that the presence of REOs promotes the esterification and carbonization process in low‐temperature range while enhances the thermal stability of IFR and FRTPO in high‐temperature range. X‐ray diffraction (XRD) reveals that the interaction of Nd₂O₃ with IFR results in the formation of neodymium phosphate (NdP₅O₁₄) with high‐thermal stability. Thermal scanning rheological tests show that the presence of REOs increases complex viscosity of FRTPO in the temperature range of 190～300°C so as to suppress melt dripping but decreases the complex viscosity and increases the loss factors tan δ in temperature range of 300～400°C to make the carbonaceous strucuture more flexible and viscous to resist stress, expand better and keep intact. Copyright © 2009 John Wiley & Sons, Ltd.     

Enhancement of a hyperbranched charring and foaming agent on flame retardancy of polyamide 6

A hyperbranched polyamine was prepared using an A₂ + B₃ approach. It acted as a hyperbranched charring and foaming agent (HCFA) in combination with ammonium polyphosphate (APP) to form a new intumescent flame retardant (IFR) system for polyamide 6 (PA6). Effect of HCFA on flame retardant and thermal degradation properties of IFR‐PA6 was investigated by limiting oxygen index (LOI), UL‐94 vertical burning, cone calorimeter, and thermogravimetric analysis (TGA) tests. The IFR system presented the most effective flame retardancy in PA6 when the weight ratio of APP to HCFA was 2:1. The LOI value of IFR‐PA6 could reach 36.5 with V‐0 rating when the IFR loading was 30 wt%. Even if the loading decreased to 25 wt%, IFR‐PA6 could still maintain V‐0 rating with an LOI value of 31. TGA curves indicated that APP would interact with both PA6 and HCFA in PA6/APP/HCFA composite under heating. The interaction between APP and HCFA improved the char formation ability of IFR system and then much more char was formed for PA6/APP/HCFA composite than for PA6/APP. Therefore, better flame retardancy was achieved. Moreover, the structure and morphology of char residue were studied by Fourier transform infrared (FTIR), X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The results indicated that compact and foaming char layer containing P‐O‐C structure was formed for PA6/APP/HCFA system during combustion. Copyright © 2010 John Wiley & Sons, Ltd.     

Effects of common synergistic agents on intumescent flame retardant polypropylene with a novel charring agent

In this article, the laboratory-made poly (p-ethylene terephthalamide) (PETA) was used as a novel charring agent and it combined with ammonium polyphosphate (APP) to prepare the intumescent flame retardant (IFR). For improving the flame-retardant efficiency of IFRs on polypropylene (PP), several general synergistic agents, such as common zinc oxide (Com-ZnO), nanometer structural zinc oxide (Nano-ZnO), zeolite 4A, and aluminum hypophosphite(Al(H₂PO₂)₃), were added in composites of PP/IFR, and the synergistic effect was investigated by the limited oxygen index (LOI), the UL-94 (vertical flame) test, thermogravimetric analysis (TG), thermogravimetry-fourier transform infraredspectroscopy (TG-IR) test, and scanning electron microscopy (SEM). It indicated that the flame retardancy was significantly enhanced in terms of prompting the char formation of PETA and interaction between APP and synergistic agents. Overall, Al(H₂PO₂)₃ was the most effective synergistic agent among them. TG-IR analysis showed that the addition of Al(H₂PO₂)₃ could delay the release of NH₃, and make the release of NH₃ more smooth, which was useful to form a dense char. SEM presented that compact, continuous and good intumescent charring layers were observed in all PP/IFR systems with synergistic agent.     

Flame retardant mechanism of an efficient flame-retardant polymeric synergist with ammonium polyphosphate for polypropylene

An efficient flame retardant polymeric synergist poly[N⁴-bis(ethylenediamino)-phenyl phosphonic-N², N⁶-bis(ethylenediamino)-1,3,5-triazine-N-phenyl phosphonate] (PTPA) was designed and synthesized from cyanuric chloride, ethylenediamine and phenylphosphonic dichloride. It was characterized by Fourier Transform Infrared (FTIR), ¹H NMR and ³¹P NMR, Elemental Analysis (EA) and Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES). Combined with ammonium polyphosphate (APP), a new intumescent flame retardant (IFR) was obtained. The flammability behaviors of polypropylene (PP)/IFR system were investigated by limiting oxygen index (LOI), vertical burning test (UL-94) and cone calorimetry. With 25 wt% of IFR (APP:PTPA = 2:1), the PP/IFR system could achieve a LOI value of 34.0% and UL-94 V-0 rating, and the heat release rate (HRR), peak heat release rate (PHRR), total heat release (THR) and smoke production rate (SPR) were considerably reduced, especially HRR and SPR were decreased by 85% and 79%, respectively. The results indicate that there is an excellent synergism between APP and PTPA, which endows PP with both good flame retardancy and good smoke suppression. Furthermore, the thermal degradation mechanism of IFR and the flame-retardant mechanism of PP/IFR system were investigated by thermogravimetric analysis (TGA), FT-IR, TG-FTIR and scanning electron microscope (SEM). The study on the flame-retardant mechanism of IFR indicated that a structure containing –CN was formed due to the reaction between APP and PTPA.     

Synergistic effect of DOPO immobilized silica nanoparticles in the intumescent flame retarded polypropylene composites

The synergistic effect of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) immobilized silica (SiO₂‐DOPO) nanoparticles with an intumescent flame retardant (IFR) on the flame retardancy of polypropylene (PP) was investigated by UL 94 vertical tests and limiting oxygen index (LOI) measurements. It was found that the PP/IFR composites (25 wt%) achieved the UL94 V0 grade and LOI increased to 32.1 with an incorporation of 1.0 wt% SiO₂‐DOPO nanoparticles. Based on thermogravimetric analysis, scanning electronic microscopy and rheological analysis, it is speculated that three factors are mainly contributed to the improvement of the flame retardancy. First, the thermal stability of PP/IFR composites was improved by incorporating SiO₂‐DOPO nanoparticles. Second, the presence of SiO₂‐DOPO nanoparticles could induce the formation of a continuous char skin layer during combustion. The compact char layer could effectively impede the transport of bubbles and heat. Third, rheological analysis indicated that SiO₂‐DOPO nanoparticles could increase viscosity of the PP/IFR composites, which was also benefited to increase flame retardancy. Copyright © 2013 John Wiley & Sons, Ltd.     

Synergistic effects of cerium phosphate and intumescent flame retardant on EPDM/PP composites

An intumescent flame retardant system composed of ammonium polyphosphate (APP) and pentaerythritol (PER) was used for flame retarding ethylene–propylene–diene‐modified elastomer (EPDM)/polypropylene (PP) blends. Cerium phosphate (CeP) was synthesized and the effect on flame retardancy and thermal stability of EPDM/PP composites based on intumescent flame retardant (IFR) were studied by limiting oxygen index (LOI), UL‐94, and thermogravimetic analysis (TGA), respectively. Scanning electron microscopy (SEM) and Fourier transform infrared spectrometry (FTIR) were used to analyze the morphological structure and the component of the residue chars formed from the EPDM/PP composites, and the mechanical properties of the materials were also studied. The addition of CeP to the EPDM/PP/APP/PER composites gives better flame retardancy than that of EPDM/PP/APP/PER composites. TGA and RT‐FTIR studies indicated that an interaction occurs among APP, PER, and EPDM/PP. The incorporation of CeP improved the mechanical properties of the materials. Copyright © 2010 John Wiley & Sons, Ltd.     

Synergistic effects of lanthanum oxide on a novel intumescent flame retardant polypropylene system

The effects of lanthanum oxide (La₂O₃) as a synergistic agent on the flame retardancy of intumescent flame retardant polypropylene composites (IFR-PP) were studied, and the new IFR system mainly consisted of the charring-foaming agent (CFA) and ammonium polyphosphate (APP). The limiting oxygen index (LOI), UL-94 test, thermogravimetric analysis (TGA), cone calorimeter (CONE) and scanning electron microscopy (SEM) were used to evaluate the synergistic effects of La₂O₃. It was found that when IFR was fixed at 20 wt% in IFR-PP composites, only a little amount of La₂O₃ could enhance LOI value and pass the UL-94 V0 rating test (1.6 mm). The TGA data showed that La₂O₃ could enhance the thermal stability of the IFR-PP systems at high temperature and effectively increase the char residue formation. The CONE results revealed that La₂O₃ and IFR could clearly change the decomposition behavior of PP and form a char layer on the surface of the composites, consequently resulting in efficient reduction of the flammability parameters, such as heat release rate (HRR), total heat release (THR), smoke production rate (SPR), total smoke production (TSP), ignition time (IT) and so on. The morphological structures observed by SEM demonstrated that La₂O₃ could promote to form the homogenous and compact intumescent char layer. Thus, a suitable amount of La₂O₃ plays a synergistic effect in the flame retardancy and smoke suppression of IFR composites.     

过渡金属氧化物对阻燃剂聚磷酸铵热分解的影响机制

过渡金属氧化物(MO)可以显著影响聚磷酸铵(APP)的热分解过程, 进而改善APP复配膨胀阻燃聚合物材料的阻燃效率。将ZnO、Fe₂O₃、TiO₂掺入到APP中, 采用热失重分析(TGA)、X射线光电子能谱(XPS)和X射线衍射分析(XRD), 考察了3种MO对APP热分解行为的影响, 分析了相互作用过程中金属原子和磷原子化学结合状态的变化以及高温热分解产物的物相结构。TGA和XPS图谱分析结果表明, MO可降低APP的起始热分解温度, 并催化APP释放NH₃和H₂O, 而在热分解后期由于金属磷酸盐的形成可显著增加APP的高温残留量。3种MO催化APP热分解脱NH₃和H₂O的活性由大到小的顺序是:ZnO>Fe₂O₃>TiO₂, 而对APP凝聚相热分解P-O产物的交联能力从大到小的顺序为:Fe₂O₃>ZnO>TiO₂。XRD结果显示, ZnO在高温下与APP反应生成了Zn(PO₃)₂晶体, 而Fe₂O₃和TiO₂与APP反应分别生成了Fe₄(P₂O₇)₃和TiP₂O₇晶体。     

过渡金属氧化物对阻燃剂聚磷酸铵热分解的影响机制

过渡金属氧化物(MO)可以显著影响聚磷酸铵(APP)的热分解过程,进而改善APP复配膨胀阻燃聚合物材料的阻燃效率。将ZnO、Fe2O3、TiO2掺入到APP中,采用热失重分析(TGA)、X射线光电子能谱(XPS)和X射线衍射分析(XRD),考察了3种MO对APP热分解行为的影响,分析了相互作用过程中金属原子和磷原子化学结合状态的变化以及高温热分解产物的物相结构。TGA和XPS图谱分析结果表明,MO可降低APP的起始热分解温度,并催化APP释放NH3和H2O,而在热分解后期由于金属磷酸盐的形成可显著增加APP的高温残留量。3种MO催化APP热分解脱NH3和H2O的活性由大到小的顺序是:ZnO>Fe2O3>TiO2,而对APP凝聚相热分解P-O产物的交联能力从大到小的顺序为:Fe2O3>ZnO>TiO2。XRD结果显示,ZnO在高温下与APP反应生成了Zn(PO3)2晶体,而Fe2O3和TiO2与APP反应分别生成了Fe4(P2O7)3和TiP2O7晶体。