A rod‐coil‐rod block copolymer, polyhexylisocyanate‐block‐polystyrene‐block‐polyhexylisocyanate, of controlled molecular weight was synthesized quantitatively via living anionic polymerization using potassium naphthalenide in the presence of sodium tetraphenylborate. The use of K+ as the counterion for the polymerization of styrene, and Na+ (NaBPh4) for the polymerization of isocyanate leads to the formation of a well‐controlled novel triblock copolymer.
A Dissipative particle dynamics (DPD) simulations are performed to study the cooperative self‐assembly of coil–rod–coil triblock copolymers and nanoparticles in solution. The results show that, when the nanoparticle concentration exceeds a given value, the ternary systems can form a novel nanocage composed of two‐end coil‐caps and middle rod‐linkers. The novel nanocage is very similar to the real bird cage and the captured nanoparticles like the bird. It is the first nanocage from the self‐assembly of coil–rod–coil triblock copolymers. This may be used for the release of drugs and fertilizers, or as nanoreactors.
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
Summary: Amphiphilic triblock copolymers (PEOx‐b‐PDMSy‐b‐PEOx) with different block lengths were synthesized and multi‐morphological complex crew‐cut, star‐like, and short‐chain aggregates were prepared by self‐assembly of the given copolymers. The morphologies and dimensions of the aggregates can be well controlled by variation of the preparation conditions. TEM, SEM, FFR‐TEM, and LLS studies show the resulting morphologies range from LCMs, unilamellar or multilayer vesicles, LCVs, porous spheres to nanorods.
TEM images of the vesicles formed from PEO‐b‐PDMS‐b‐PEO. 相似文献
We report a new type of step‐growth radical addition‐coupling polymerization (RACP) involving consecutive addition of carbon‐centered radical derived from α,α′‐dibromo dibasic ester to NO double bond of C‐nitroso compound followed by cross‐coupling of carbon‐centered radical and in situ formed nitroxyl radical, which produces alternating copolymers with high molecular weight and unimodal molecular weight distribution from saturated and unsaturated monomers.
A one‐step method to fabricate a biomimetic dual‐scale hierarchical structure for a transparent anti‐reflective, self‐cleaning layer for organic solar cells is reported. Template‐mediated UV replica molding is used to directly create a multi‐functional surface with an acrylate‐functionalized perfluoropolyether without complicated processing steps. The surface exhibits superhydrophobic properties and self‐cleaning characteristics. In addition, the surface leads to an enhancement of photovoltaic power conversion efficiency by ≈10% as a result of reflection suppression and transmittance enhancement. The method can easily be applied to large area substrates (22 cm × 24 cm) in a cost‐effective manner. Furthermore, the solar cell can withstand harsh outdoor conditions for a long time, without a notable change in the device performance, owing to robust surface layer and non‐fouling properties.
A new approach toward the grafting of norborn‐2‐ene derivatives onto ROMP‐based monolithic supports has been developed. Grafting yields were governed by three variables, which are the catalyst, temperature and the crosslinker used. Three different catalysts, three grafting temperatures, as well as two different crosslinkers were investigated. By optimizing all variables 4‐fold amounts of grafted monomers compared to previously reported procedures were obtained reaching values of 1.04 mmol of monomer/g monolith.
Grafted monolithic supports applying the method reported here. 相似文献
Amphiphilic star‐shaped oligo(ethylene glycol)s with a hydrophobic bile acid core and varying number of hydrophilic arms have been made. Their thermal behavior in aqueous solutions depends on the number rather than the length of the arms. The two‐armed lithocholate derivative showed the strongest tendency for association and exhibited the lowest cloud point (79 °C) of the oligomers made, as well as another phase separation at a lower temperature (31 °C). The “double thermosensitivity” arising both from the salt‐dependent LCST of the oligo(ethylene glycol) segments and the temperature‐responsive self‐assembly of amphiphilic bile acid derivative provides an interesting path in the design of bile acid‐based smart materials.
Magnetic nanomaterials have been studied in order to generate novel nanocomposites that display both the magnetic properties of the nanoparticles and the ability to self‐assemble of the amorphous block copolymer matrix. Towards this goal, iron oxide magnetic nanoparticles have been modified with PS brushes by ATRP in order to improve both the dispersion and the affinity of the nanoparticles with one of the blocks of a polystyrene‐block‐polybutadiene‐block‐polystyrene block copolymer. This method of preparation of nanocomposites opens new strategies for the generation of magnetic nanomaterials. The samples are characterized using DSC and atomic and magnetic force microscopies.
Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.
Crystallization of poly(2‐isobutyl‐2‐oxazoline) and poly(2‐nonyl‐2‐oxazoline) is found to occur by room temperature annealing below the upper critical solution temperature in ethanol–water solvent mixtures. Both polymers produce similar self‐assembled structures (see image), resembling the previously reported crystalline hierarchical structures obtained from hot aqueous poly(2‐isopropyl‐2‐oxazoline) solutions above the lower critical solution temperature. These observations suggest that the crystallization induced self‐assembly process is a rather general phenomenon occurring for semicrystalline polymers in liquid–liquid two phase systems.
Summary: The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine (PhOZI) with methyl tosylate (MeOTs) and butyl iodide (BuI) as initiators were performed in refluxing butyronitrile. Reaction kinetics under microwave irradiation was compared with conventional oil bath heating. The polymerization rates, under microwave irradiation, showed an acceleration by a factor of 1.8 (independently from the used initiator). The investigation of the thermal properties of the obtained poly(N‐benzoyl‐trimethyleneimine) showed the influence of molecular weight and end‐groups on the glass transition temperature.
The ring‐opening polymerizations of 2‐phenyl‐5,6‐dihydro‐4H‐1,3‐oxazine performed in refluxing butyronitrile. 相似文献
We have used dissipative particle dynamics (DPD) to simulate the self‐assembling behavior of A‐block‐(B‐graft‐C) coil‐comb molecules, in which each B segment is covalently bonded with one C segment. In addition to the composition, we found that by varying any of the interaction parameters between each pair of components I and J, where I, J = A, B, C, we can also induce a series of morphology transitions associated with two length scales. Moreover, we observed that if the length of the BC‐comb block is not long enough, the resulting morphology is mainly in the large‐length‐scale, ordering between the A‐rich and C‐rich domains with most of the B in the interfaces. By increasing the length of the BC‐comb block, one may expect that both B and C can pack orderly to form a lamellar structure. As a result, various experimentally observed structure‐within‐structures have been simulated via DPD.
Nylon‐6/poly(ethylene terephthalate) (PET) ultra‐multi‐island sea–island conjugated melt‐spun fibers are flow‐drawn at a draw ratio of 174 with heating by CO2 laser irradiation. Continuous PET nanofibers that have a diameter of 39 nm could be obtained from the flow‐drawn fiber with further drawing and removal of the sea component. In addition, the drawn fiber has a strength of 0.54 GPa. This result shows that a PET nanofiber having a strength almost equal to that of a conventional PET fiber can be obtained by the combination of conjugate‐melt‐spinning and laser‐heated flow‐drawing.
Two porphyrin‐cored thiophene dendrimers T(3T)P and T(7T)P have been successfully synthesized and characterized by UV‐vis and fluorescence measurements. The self‐assembly of these two water‐insoluble free base porphyrins to form both intrinsic H‐ and J‐aggregates has been reported for the first time. This intrinsic behavior is in contrast to the use of surfactants, dyes, and metal ions to induce aggregation behavior on most porphyrin systems. This work emphasizes the importance of controlling the size, solvent, and extent of conjugation of polythiophene dendron groups in porphyrin systems. These materials may yet be applied to polythiophene or porphyrin blend system in energy conversion devices with the light‐harvesting properties of the polythiophene dendrons.
Summary: Nitroxide‐mediated polymerization of styrene in a continuous tubular reactor has been demonstrated for the first time. The polymerization kinetics in the tubular reactor are similar to those in a batch reactor. The number average molecular weight increases linearly with conversion, and chain extension experiments were successful, indicating that the living nature of the polymerization is maintained in the tubular reactor.
Evolution of molecular weight as measured by GPC for chain‐extended latex in continuous tubular reactor. 相似文献
This paper reports on the cell uptake and trafficking properties of a series of non‐covalent polymer–drug conjugates. These nanomedicines are composed of a poly(N‐(2‐hydroxypropyl)methacrylamide) backbone functionalized with multiple copies of a drug. The drug moieties are attached to the polymer via a non‐covalent, so called coiled coil motif, which is formed by heterodimerization of two complementary peptide strands, one of which is attached to the polymer carrier and the other to the drug. Cytotoxicity and FACS experiments, which were carried out with model anticancer drug or fluorophore conjugates, provided insight into the cell uptake and trafficking behavior of these conjugates.
Atomic force microscopy characterization has been conducted to reveal the morphological difference between single‐ring bands in poly(butylene adipate) (PBA). Furthermore, morphological features of the ring‐less Maltese‐cross spherulites are compared to the ring‐band spherulites. Periodic changes in height seem to be common for either the ring‐band or ring‐less (Maltese‐cross) crystal domains; however, the steepness in height change is greater for the ring‐band crystal, while height change in the ring‐less crystal exhibits a terrace‐like layer pattern. In the ring‐band crystal region, the lamellar stalks, which taper off to pointed needle‐like stalks, monotonously protrude out of the layers of softer materials, with no signs of twisting, bending, or turning. In contrast, all lamellae in the ring‐less (Maltese‐cross) crystal region are uniform platelets arranged like flower petals in a layered pattern.
