Metal-driven viscoelastic wormlike micelle in anionic/zwitterionic surfactant systems and template-directed synthesis of dendritic silver nanostructures

In this work, metal ion-induced viscoelastic wormlike micelles in anionic/zwitterionic surfactant solutions (sodium dodecylsulfate/tetradecyldimethylammoniumpropanesulfonate, SDS/TPS) are reported. Steady and dynamic rheology and cryogenic transmission electron microscopy (cryo-TEM) are employed to characterize wormlike micelles in the SDS/TPS/Ca(NO(3))(2) system. Moreover, the surfactant mixing ratio and surfactant tail length are varied to reveal the factors that influence wormlike micelle growth and solution viscoelasticity. A series of metal ions such as Na(+), Mg(2+), Zn(2+), and Al(3+) are proven to promote viscoelastic wormlike micelle formation in the SDS/TPS system. The metal-containing wormlike micelles are expected to be good candidates for directing the synthesis of inorganic nanomaterials. In this article, dendritic silver nanostructures have been prepared in the surfactant wormlike micelle by in situ UV irradiation for the first time.     

Controllable synthesis of conducting polypyrrole nanostructures

Wire-, ribbon-, and sphere-like nanostructures of polypyrrole have been synthesized by solution chemistry methods in the presence of various surfactants (anionic, cationic, or nonionic surfactant) with various oxidizing agents [ammonium persulfate (APS) or ferric chloride (FeCl3), respectively]. The surfactants and oxidizing agents used in this study have played a key role in tailoring the nanostructures of polypyrrole during the polymerization. It is inferred that the lamellar structures of a mesophase are formed by self-assembly between the cations of a long chain cationic surfactant [cetyltrimethylammonium bromide (CTAB) or dodeyltrimethylammonium bromide (DTAB)] and anions of oxidizing agent APS. These layered mesostructures are presumed to act as templates for the formation of wire- and ribbon-like polypyrrole nanostructures. In contrast, if a short chain cationic surfactant octyltrimethylammonium bromide (OTAB) or nonionic surfactant poly(ethylene glycol) mono-p-nonylphenyl ether (Opi-10) is used, sphere-like polypyrrole nanostructures are obtained, whichever of the oxidizing agents mentioned above is used. In this case, micelles resulting from self-assembly among surfactant molecules are envisaged to serve as the templates while the polymerization happens. It is also noted that, if anionic surfactant sodium dodeyl surfate (SDS) is used, no characteristic nanostructures of polypyrrole were observed. This may be attributed to the doping effect of anionic surfactants into the resulting polypyrrole chains, and as a result, micelles self-assembled among surfactant molecules are broken down during the polymerization. The effects of monomer concentration, surfactant concentration, and surfactant chain length on the morphologies of the resulting polypyrrole have been investigated in detail. The molecular structures, composition, and electrical properties of the nanostructured polypyrrole have also been investigated in this study.     

Interfacially formed organized planar inorganic, polymeric and composite nanostructures

This paper discusses synthetic strategies for fabrication of new organized planar inorganic, polymeric, composite and bio-inorganic nanostructures by methods based on chemical reactions and physical interactions at the gas-liquid interface, Langmuir monolayer technique, interfacial ligand exchange and substitution reactions, self-assembling and self-organization processes, DNA templating and scaffolding. Stable reproducible planar assemblies of ligand-stabilized molecular nanoclusters containing definite number of atoms have been formed on solid substrate surfaces via preparation and deposition of mixed Langmuir monolayers composed by nanocluster and surfactant molecules. A novel approach to synthesis of inorganic nanoparticles and to formation of self-organized planar inorganic nanostructures has been introduced. In that approach, nanoparticles and nanostructures are fabricated via decomposition of insoluble metal-organic precursor compounds in a layer at the gas-liquid interface. The ultimately thin and anisotropic dynamic monomolecular reaction system was realized in that approach with quasi-two-dimensional growth and organization of nanoparticles and nanostructures in the plain of Langmuir monolayer. Photochemical and redox reactions were used to initiate processes of interfacial nucleation and growth of inorganic phase. It has been demonstrated that morphology of resulting inorganic nanostructures can be controlled efficiently by variations of growth conditions via changes in state and composition of interfacial planar reaction media, and by variations of composition of adjacent bulk phases. Planar arrays and chains of iron oxide and ultrasmall noble metal (Au and Pd) nanoparticles, nanowires and new organized planar disk, ring, net-like, labyrinth and very high-surface area nanostructures were obtained by methods based on that approach. Highly organized monomolecular polymeric films on solid substrates were obtained via deposition of Langmuir monolayer formed by water-insoluble amphiphilic polycation molecules. Corresponding nanoscale-ordered planar polymeric nanocomposite films with incorporated ligand-stabilized molecular metallic nanoclusters and interfacially grown nanoparticles were fabricated successfully. Novel planar DNA complexes with amphiphilic polycation monolayer were formed at the gas-aqueous phase interface and then deposited on solid substrates. Toroidal and new net-like conformations were discovered in those complexes. Nanoscale supramolecular organization of the complexes was dependent on cationic amphiphile monolayer state during the DNA binding. These monolayer and multilayer DNA/amphiphilic polycation complex Langmuir-Blodgett films were used as templates and nanoreactors for generation of inorganic nanostructures via metal cation binding with DNA and following inorganic phase growth reactions. As a result, ultrathin polymeric nanocomposite films with integrated DNA building blocks and organized inorganic semiconductor (CdS) and iron oxide quasi-linear nanostructures were formed. It has been demonstrated that interaction of deposited planar DNA/amphiphilic polycation complexes with bulk phase colloid inorganic cationic ligands (CdSe nano-rods) can result in formation of new highly organized hybrid bio-inorganic nanostructures via interfacial ligand exchange and self-organization processes. The methods developed can be useful for investigation of fundamental mechanisms of nanoscale structural organization and transformation processes in various inorganic and molecular systems including bio-molecular and bio-inorganic nanostructures. Also, those methods are relatively simple, environmentally safe and thus could prove to be efficient practical instruments of molecular nanotechnology with potential of design and cost-effective fabrication of new controlled-morphology organized planar inorganic and composite nanostructured materials. Possible applications of obtained nanostructures and future developments are also discussed.     

Photoelectron spectroscopy of metal β-diketonato complexes

The electronic structures of yttrium(III), gadolinium(III) and ytterbium(III) tris-2,2,6,6-tetramethyl-3,5-heptanedione (tmhd) complexes have been investigated by HeI and HeII photoelectron spectroscopy (UPS), UDFT and OVGF calculations. We discuss metal-ligand bonding in the series of metal β-diketonato complexes on the basis of empirical arguments. The photoionization cross-sections and orbital energies of metal atoms must both be taken into account in order to rationalize changes in relative band intensities of the HeI/HeII spectra.     

Electrochemical tailoring of lamellar-structured ZnO films by interfacial surfactant templating

Zinc oxide films with ordered lamellar structures can be electrochemically produced by interfacial surfactant templating. This method utilizes amphiphile assemblies at the solid-liquid interface (i.e., the surface of a working electrode) as a template to electrodeposit inorganic nanostructures. To gain the ability to precisely tailor inorganic lamellar structures, the effect of various chemical and electrochemical parameters on the repeat distances, homogeneity, orientation, and quality of the interfacial amphiphilic bilayers were investigated. Surfactants with anionic headgroups (e.g., 1-hexadecanesulfonate sodium salt, dodecylbenzenesulfonate sodium salt, dioctyl sulfosuccinate sodium salt, mono-dodecyl phosphate, and sodium dodecyl sulfate) are critical because they incorporate Zn(2+) ions into their bilayer assemblies as counterions and guide the lamellar growth of ZnO films. Unlike surfactant structures in solution, the interfacial surfactant assemblies are insensitive to the surfactant concentration in solution. The use of organic cosolvents (e.g., ethylene glycol, dimethyl sulfoxide) can increase the homogeneity of bilayer assemblies when multiple repeat distances are possible in a pure aqueous medium. In addition, organic cosolvents can make the interfacial structure responsive to the change in bulk surfactant concentrations. The presence of quaternary alkylammonium salts (e.g., cetyltrimethylammonium bromide) as cationic cosurfactants improves the ordering of anionic bilayers significantly. Consequently, it also affects the orientation of lamellar structures relative to the substrate as well as the surface texture of the films. The quality of lamellar structures incorporated in ZnO films is also dependent on the deposition potentials that determine deposition rates. A higher degree of ordering is achieved when a slower deposition rate (I < 0.15 mA/cm(2)) is used. The results described here will provide a useful foundation to design and optimize synthetic conditions for the electrochemical construction of broader types of inorganic nanostructures.     

Gold nanostructures from cube-shaped crystalline intermediates

Conventional bottom-up approaches for building nanostructures rely on the ability to synthesize nanoparticles of different shapes and sizes in a controlled manner that are then assembled to produce useful structures. Here, we present an alternate approach for producing nanostructures based on the formation of a crystalline intermediate in which the metal ion can be reduced in a controlled manner. Partial reduction of HAuCl4 by a long-chain amine results in the formation of a cube-shaped crystalline intermediate in which Au is present in a +1 oxidation state. By control of the nucleation of the metal in the intermediate, a variety of nanostructures can be synthesized. Here, we present results on the formation of superlattices, hollow cubes, nanotubes, and extended hollow structures starting from the intermediate. Direct evidence for the formation of metal within the intermediate by in situ electron-beam-induced reduction in the transmission electron microscope is presented.     

Anionic hybrid threadlike micelle formation in an aqueous solution

Novel anionic hybrid threadlike micelle formation was found in an aqueous solution of an anionic surfactant, sodium tetradecylsulfate (NaC(14)S), and partially quarternized polyelectrolyte at ca. 0.55, poly(N,N-diallyl-N-methylamine-ran-N,N-diallyl-N-ethyl-N-methylammonium bromide) (P(DAM/DAEMBr)). The system precipitated insoluble complexes at a composition of iso-electric points, forming long and stable hybrid threadlike micelles at a composition close to an iso-molar point between NaC(14)S and P(DAM/DAEMBr) in monomer units. Then, the system turned into transparent liquids and showed remarkable viscoelasticity due to entanglements between the formed anionic hybrid threadlike micelles.     

SAXS study on complexes formed by anionic poly(sodium methacrylate‐co‐N‐isopropylacrylamide) gels with cationic surfactants

Small‐angle X‐ray scattering (SAXS) has been used to study the nanostructures of complexes formed by slightly crosslinked anionic copolymer gels of poly(sodium methacrylate‐co‐N‐isopropylacrylamide) [P(MAA/NIPAM)] interacting with cetylpyridinium bromide (CPB), and alkyltrimethylammonium bromide (C_nTAB, 10 ≤n ≤ 18), respectively. Both the charge density of polyelectrolyte gels and the surfactant alkyl tail length could induce the phase structure transition from Pm3n space group cubic to hexagonal close packing of spheres (HCP), while the different polar groups of pyridinium and trimethylammonium with the same hydrophobic cetyl chain in surfactants had no significant effects on the structures of complexes formed with the same gels. The highly ordered structures were shown to be formed by the self‐assembly of ionic surfactants inside the anionic gel network, driven by both electrostatic and hydrophobic interactions. Freeze drying the water‐equilibrated complexes could collapse the formed ordered structures. However, the highly ordered structures could be restored after the dried complexes were reswollen by water under the same conditions, indicating that the highly ordered water‐equilibrated complexes were thermodynamically stable. Copyright © 2000 John Wiley & Sons, Ltd.     

Polymer-induced structural changes in lecithin/sodium dodecyl sulfate-based multilamellar vesicles

Aqueous concentrated lecithin mixtures (asolectin from soybean) show typical lamellar liquid crystalline behavior and the individual lamellae tend to form spherical supramolecular structures, i.e., multilamellar vesicles. When part of the lecithin is replaced by the anionic surfactant sodium dodecyl sulfate (SDS), the compact multilamellar vesicles disappear and the viscosity decreases. By adding poly(diallyldimethylammonium chloride) (PDADMAC) to the lecithin/SDS system, the formation of multilamellar vesicles can be induced again and the viscosity increases. However, one characteristic feature of these polymer-modified systems is a temperature-dependent phase transition from a compact multilamellar vesicle phase to a more swollen liquid crystalline phase. The polymer-modified multilamellar compact vesicles are of interest for utilization as new thermosensitive drug delivery systems.     

Temperature-induced intermicellization and contraction in aqueous mixtures of sodium dodecyl sulfate and an amphiphilic diblock copolymer

Aqueous solutions of a thermoresponsive amphiphilic diblock copolymer, containing poly(N-isopropylacrylamide), in the presence of the anionic sodium dodecyl sulfate (SDS) surfactant can undergo a temperature-induced transition from loose intermicellar clusters to collapsed core–shell nanostructures. The polymer–surfactant mixtures have been characterized with the aid of turbidity, small-angle neutron scattering (SANS), intensity light scattering (ILS), dynamic light scattering (DLS), shear viscosity, and rheo-small angle light scattering (rheo-SALS). In the absence of SDS, compressed intermicellar structures are formed at intermediate temperatures, and at higher temperatures further aggregation is detected. The SANS results disclose a structure peak in the scattered intensity profile at the highest measured temperature. This peak is ascribed to the formation of ordered structures (crystallites). In the presence of a low amount of SDS, a strong collapse of the intermicellar clusters is observed at moderate temperatures, and only a slight renewed interpolymer association is found at higher temperatures because of repulsive electrostatic interactions. Finally, at moderate surfactant concentrations, temperature-induced loose intermicellar clusters are detected but no shrinking was registered in the considered temperature range. At a high level of SDS addition, large polymer–surfactant complexes appear at low temperatures, and these species are compressed at elevated temperatures. The rheo-SALS results show that the transition structures are rather fragile under the influence of shear flow.     

Effect of terbium(III) chloride on the micellization properties of sodium decyl- and dodecyl-sulfate solutions

The effect of TbCl3 on the aggregation processes of the anionic surfactants sodium decyl sulfate (SDeS) and sodium dodecyl sulfate (SDS) has been investigated. Electrical conductivity data, combined with Tb(III) luminescence measurements suggest that the formation of micelles involving TbCl3 and SDS occurs at concentrations below the critical micelle concentration (cmc) of the pure surfactants; the formation of these mixed aggregates was also monitored by light scattering, which indicates that the addition of TbCl3 to surfactant concentration at values below the pure surfactant cmc results in a much greater light scattering than that found with pure sodium alkylsulfate surfactant micelles. This phenomenon is dependent upon the alkyl chain length of the surfactant. With Tb(III)/DS-, complexes are formed with a cation/anion binding ratio varying from 3 to 6, which depends upon the initial concentration of Tb(III). This suggests that the majority of the cation hydration water molecules can be exchanged by the anionic surfactant. When the carbon chain length decreases, interactions between surfactant and Tb(III) also decrease, alterations in conductivity and fluorescence data are not so significant and, consequently, no binding ratio can be detected even if existing. The surfactant micellization is dependent on the presence of electrolyte in solution with apparent cmc being lower than the corresponding cmc value of pure SDS.     

聚合物复合物层层组装膜

层层组装是一种基于物质交替沉积而制备复合膜的方法,可以实现膜的结构和组成的精确调控.聚合物复合物是基于各种分子间弱相互作用力而形成的超分子聚集体,其种类包括聚阳离子-聚阴离子复合物、聚电解质-有机小分子复合物、中性聚合物-聚合物复合物以及聚合物-无机杂化复合物等.在本文中,以作者的研究结果为基础,阐明聚合物复合物的层层组装是一种方便、快捷的功能复合膜的构筑方法,具有如下优点:(1)聚合物复合物大的尺度可以实现聚合物复合物层层组装膜的快速构筑;(2)聚合物复合物的结构在组装溶液中和成膜后都容易调控,方便聚合物复合物层层组装膜结构的精细调控.(3)聚合物复合物层层组装膜可以构筑非复合的聚合物层层组装所不能获得的膜结构及功能.     

LA/C14DMAO/H2O体系多结构自组装体及其模板金纳米材料制备与性能

月桂酸(LA)与十四烷基二甲基氧化胺(C₁₄DMAO)形成的无盐阴/阳离子表面活性剂混合体系表现出丰富的相行为。运用冷冻蚀刻透射电子显微镜(FF-TEM)和偏光显微镜(POM)、差示扫描量热(DSC)、流变和[2]H NMR测定对体系相行为和微观结构进行了研究,发现水溶液中可自聚集形成胶束(L₁)、层状(L_αl)、囊泡(L_αν)和凝胶相。以胶束相和层状相为软模板制备了金纳米材料,运用透射电子显微镜(TEM)和能谱仪(EDS)表征了金纳米材料。与用传统阳离子表面活性剂溶液制备金纳米材料相比,该体系由于具有自身还原性而不需要加入还原剂NaBH₄。实验证明：还原过程不会破坏模板溶液原有微观结构,且可通过调控聚集体结构实现控制制备金纳米材料形貌的目的。HK-2细胞的噻唑蓝(MTT)比色法实验进一步证明,本体系制备的球形金纳米材料作为基因载体具有高效和低毒的特点,在基因治疗中具有潜在的实际应用价值,可为寻求安全可靠的基因治疗途径提供实验数据和理论参考。     

Investigation on the aggregation behaviors of DDAB/NaDEHP catanionic vesicles in the absence and presence of a negatively charged polyelectrolyte

The aggregation behaviors of the cationic and anionic (catanionic) surfactant vesicles formed by didodecyldimethylammonium bromide (DDAB)/sodium bis(2-ethylhexyl) phosphate (NaDEHP) in the absence and presence of a negatively charged polyelectrolyte are investigated. The amount of the charge on the vesicle can be tuned by controlling the DDAB/NaDEHP surfactant molar ratio. The charged vesicular dispersions made of DDAB/NaDEHP are mixed with a negatively charged polyelectrolyte, poly(4-styrenesulfonic acid-co-maleic acid) sodium (PSSAMA), to form complexes. Depending on the polyelectrolyte/vesicle charge ratio, complex flocculation or precipitation occurs. Characterization of the catanionic vesicles and the complexes are performed by transmission electron microscope (TEM), Cryo-TEM, dynamic light scattering (DLS), conductivity, turbidity, zeta potential, isothermal titration calorimetry (ITC) and small-angle X-ray scattering (SAXS) measurements.     

Rheological Properties of Anionic Surfactant Solutions in the Presence of Al3+ Counterion

Aqueous solutions of ionic surfactants with strongly binding counterions exhibit wormlike or network properties. The properties of anionic micelles of sodium dodecyltrioxyethylene sulfate (AES) in the presence of multivalent counterion Al³⁺ were investigated by dynamic rheological methods. The steady-shear viscosity and stress, the zero-shear viscosity, the complex viscosity, and the dynamic shear modulus have been determined as a function of the surfactant and salt concentrations. Some interesting and noticeable results have been obtained, which can express the micellar growth and structure. The formation of wormlike micelles or network structure in surfactant solutions becomes much easier with increasing surfactant and salt concentrations. The Cox-Merz rule and the Cole-Cole plot are not applicable perfectly to the systems studied. The nonlinear viscoelasticity and non-Newtonian behavior can be found in all solutions according to the comparison with the simple Maxwell model. The technique of freeze-fracture transmission electron microscopy (FF-TEM) was also applied to confirm the formation of these interesting structures.     

Synthesis and characterization of "hairy urchin"-like polyaniline by using β-cyclodextrin as a template

A novel synthesis of "hairy urchin"-shaped polyaniline (PAni) and its surface coverage with nanospikes was achieved from a simple microemulsion polymerization technique in the presence of β-cyclodextrin (β-CD). The rodlike micelle phase was characterized, and the key factors affecting the formation of PAni nanostructures were systematically examined. Ferric chloride (FeCl(3)) has played a role as a structural directing agent to fabricate the polymer as hairy urchin-like structure/nanorods via a cooperative interaction between FeCl(3) and DoTAC in an aqueous medium. Host-guest inclusion complex of β-cyclodextrin with aniline was used as a monomer. It has been revealed that the formation of the supramolecular complexes of polyaniline with β-CD due to host-guest interaction is indispensable for the fabrication of these unique PAni nanostructures, and a suitable β-CD to aniline molar ratio is essential to their exclusive formation. Different varieties of PAni nanostructures such as hairy urchin, branched particles consisting of rodlike branches, and regular rodlike particles were obtained in the presence of FeCl(3). Also, in the absence of FeCl(3), a predominant product of regular spherical particles and wirelike aggregation exhibiting faceted surfaces were obtained. The structures of polyaniline hairy urchin-like nanorods were analyzed using transmission electron microscopy (TEM). The synthesized polymer was characterized by Fourier-transform infrared spectroscopy and X-ray diffraction technique. Additionally, the relationship between the morphology and the conductivity of the PAni nanostructures was investigated as well.     

Effect of Surfactant Addition on the Structure of Silver Aggregates Produced by Galvanic Cell Reaction and Fabrication of Superhydrophobic Surfaces

The effect of cationic or anionic surfactant on the structure of the silver particles produced by galvanic cell reaction is studied. In the absence of any surfactant, both spherical and spindle-like Ag particles are produced, which exhibit binary structures with both micro- and nanoscale characteristics. Addition of cationic surfactant cetyltrimethylammonium bromide (CTAB) in the reaction solution results in the formation of spherical Ag particles with much smaller sizes. While anionic surfactant sodium dodecyl sulfate (SDS) results in the spindle-like Ag particles. Moreover, the rough Ag surfaces can be easily fabricated by direct deposition of the Ag aggregates onto the silicon surface from solution. After further chemisorption of a self-assembled monolayer of n-dodecanethiol, the Ag aggregates exhibit superhydrophobic properties.     

Fluorescence drainage profiles of thin liquid films

Fluorescence drainage-profiles of thin liquid films formed from Rhodamine solutions containing anionic, cationic and non-ionic surfactants have been investigated. It is found that the influence of system variables such as electrolyte concentration, dye concentration, film environment and solution viscosity can be evaluated by means of the profiles. The addition of sodium chloride leads to the expansion (non-ionic surfactant), or contraction (anionic surfactant) of the profiles. In the case of the cationic surfactant, it reduces the number of fringes in the profiles. The height of selected fringes changes linearly with dye concentration, and no fringes are observed when the films are submerged in non-polar solvents. The influence of solution viscosity on film thickness and drainage rate is demonstrated by the number and frequency of fringes in the profile. The formation of first and second "black films" from solutions containing varying concentrations of sodium chloride can be shown.     

Long‐lived layered silicates‐immobilized 2,6‐bis(imino)pyridyl iron (II) catalysts for hybrid polyethylene nanocomposites by in situ polymerization: Effect of aryl ligand and silicate modification

Heterogeneous‐layered silicate‐immobilized 2,6‐bis(imino)pyridyl iron (II) dichloride/MMAO catalysts, in which the active polymerization species are intercalated within sodium‐ and organomodified‐layered silicate galleries, were prepared for producing hybrid exfoliated polyethylene (PE) nanocomposites by means of in situ polymerization. The inorganic filler was first treated with modified‐methylaluminoxane (MMAO) to produce a supported cocatalyst: MMAO reacts with silicates replacing most of the organic surfactant, thus modifying the original crystallographic clay order. MMAO anchored to the nanoclay was able to activate polymerization iron complexes initiating the polymer growth directly from the filler lamellae interlayer. The polymerization mechanism taking place in between the montmorillonite lamellae separates the layers, thus promoting deagglomeration and effective clay dispersion. Transmission electron microscopy revealed that in situ polymerization by catalytically active iron complexes intercalated within the lower organomodified clay led to fine dispersion and high exfoliation extent. The intercalated clay catalysts displayed a longer polymerization life‐time and brought about ethylene polymerization more efficiently than analogous homogeneous systems. PEs having higher molecular masses were obtained. These benefits resulted to be dependent more on the filler nature than on the ligand environment around the iron metal center and the experimental synthetic route. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 548–564, 2009