Influence of Cyclodextrins on the Kinetics of Oxidation of Amino Acids and BSA by Hydrazyl Radicals

The kinetics of oxidation of amino acids (Arg, His, Lys, Phe, Thr and Tyr), a dipeptide (Gly-His), and BSA (bovine serum albumin) by two persistent water soluble free radicals of the hydrazyl type has been studied.The rate decreases in the order Arg>Lys>Tyr>Thr>HisBSAPheGly-His with bothfree radicals. Addition to the reaction mixture of - and -cyclodextrin decreases the oxidation rate, probably due to amino acidencapsulation in the cyclodextrin cavity. -Cyclodextrin protects more efficiently against oxidation than -cyclodextrin.     

The microscopic investigation of structures of moving flux lines by neutron and muon techniques

We have used a variety of microscopic techniques to reveal the structure and motion of flux line arrangements, when the flux lines in low T _c type II superconductors are caused to move by a transport current. Using small-angle neutron scattering by the flux line lattice (FLL), we are able to demonstrate directly the alignment by motion of the nearest-neighbor FLL direction. This tends to be parallel to the direction of flux line motion, as had been suspected from two-dimensional simulations. We also see the destruction of the ordered FLL by plastic flow and the bending of flux lines. Another technique that our collaboration has employed is the direct measurement of flux line motion, using the ultra-high-resolution spectroscopy of the neutron spin-echo technique to observe the energy change of neutrons diffracted by moving flux lines. The muon spin rotation (μSR) technique gives the distribution of values of magnetic field within the FLL. We have recently succeeded in performing μSR measurements while the FLL is moving. Such measurements give complementary information about the local speed and orientation of the FLL motion. We conclude by discussing the possible application of this technique to thin film superconductors.     

Electrochemical synthesis of cobalt hydroxide films with tunable interlayer spacings

An electrochemical synthetic condition is developed to produce cobalt hydroxide films with significantly increased basal spacings (d(001)>or= 25.0 A) by incorporating anionic surfactants (i.e. sodium dodecyl sulfate and 1-hexadecanesulfonate) into the interlayer regions via electrodeposition.     

Elucidating the structure-dependent photocatalytic properties of Bi2WO6: a synthesis guided investigation

Polycrystalline microspheres and single-crystalline microplates of Bi(2)WO(6) have been synthesized by ultrasonic spray pyrolysis. Herein, these materials are evaluated as photocatalysts for the visible light mediated degradation of rhodamine B, a model pollutant, and the results compared to those obtained with Bi(2)WO(6) prepared by traditional methods. The microplates, which displayed the best crystallinity and highest surface area, were anticipated to facilitate the greatest rate of dye photodegradation. However, the polycrystalline microspheres outperformed both the Bi(2)WO(6) microplates and traditional samples. To understand the origin of this result, the local and macroscale structures of the Bi(2)WO(6) samples were comprehensively characterized by spectroscopy techniques (diffuse reflectance, fluorescence, Raman, and X-ray photoelectron spectroscopy) as well as electron microscopy and diffraction. This analysis found that the enhanced performance of the Bi(2)WO(6) microspheres results from the expression of a hydrophilic surface, a low concentration of point defects, and a moderate surface area. This finding highlights the significant role synthesis plays in imparting structure and functionality to solid materials.     

Investigation of the quantitative properties of the quadrupole orthogonal acceleration time-of-flight mass spectrometer with electrospray ionisation using 3,4-methylenedioxymethamphetamine

This paper describes the investigation of the potential of a quadrupole orthogonal acceleration time-of-flight mass spectrometer (Q-TOF) equipped with an atmospheric pressure ionisation interface for quantitative measurements of small molecules separated by reversed phase liquid chromatography. To this end, the detection limits and linear dynamic range in particular were studied in an LC/MS/MS experiment using 3,4-methylenedioxymethamphetamine standards and 3,4-methylenedioxyethylamphetamine for internal standardisation. In a second phase, the experiment was repeated with real biological extracts (whole blood, serum, and vitreous humour). A calibration for 3,4-methylenedioxymethamphetamine and its metabolite 3,4-methylenedioxyamphetamine was prepared in each of these matrices again using 3,4-methylenedioxyethylamphetamine as internal standard. The resulting quantitative data were compared with those obtained by liquid chromatography with fluorescence detection for the same extracts. The Q-TOF results revealed excellent sensitivity and a linear dynamic range of nearly four decades (2-10 000 pg on-column, r(2) = 0.9998, 1/x weighting). Furthermore, all the calibration curves prepared in biological material were superimposable, LC/MS/MS and LC-fluorescence, and the quantitative results for actual samples compared very favourably. It was concluded that the Q-TOF achieves a linear dynamic range for quantitative LC/MS/MS work exceeding that of fluorescence detection and at much better absolute sensitivity. Copyright 1999 John Wiley & Sons, Ltd.     

Anodic construction of lamellar structured ZnO films using basic media via interfacial surfactant templating

Zinc oxide films with ordered lamellar structures were anodically deposited in basic media using an interfacial surfactant templating method. Sodium dodecyl sulfate (SDS) and lauric acid served as efficient structure-directing agents and incorporated a lamellar structure with d(001) = 3.5 and 2.8 nm, respectively, into ZnO films. When 0.03 M cetyltrimethylammonium bromide (CTAB) or tetramethylammonium bromide (TAB) was added as supporting electrolytes, the amount of SDS required to template the lamellar structures was decreased from 10 to 5 wt % and the basal spacing of the resulting lamellar structure was decreased to 3.1 nm. The effects created by the addition of CTAB and TAB are identical, indicating that the amphiphilic nature of CTAB does not play a major role in altering SDS assemblies. Investigation of the effect of various supporting cations and anions (e.g., NaCl, NaBr, NaI, Na2SO4) demonstrated that the effect seen with the addition CTAB and TAB is primarily due to the cationic groups reducing the repulsion of SDS head groups and enhancing interactions between anionic inorganic species (i.e., [Zn(OH)4]2-) and anionic SDS. Br- and I- ions also appear to have a slight effect on improving the ordering of interfacial SDS assemblies, while no apparent changes were observed when NaCl and Na2SO4 were added. These results indicate that it is not the increase in concentration of any salts but the specific type of cations and anions that can alter the interfacial SDS assemblies.     

Electrochemical synthesis of Zn-Al layered double hydroxide (LDH) films

A new electrodeposition condition to produce Zn-Al LDH films was developed using nitrate solutions containing Zn (2+) and Al (3+) ions. Deposition was achieved by reducing nitrate ions to generate hydroxide ions on the working electrode. This elevates the local pH on the working electrode, resulting in precipitation of Zn-Al LDH films. The effect of deposition potential, pH of the plating solution, and the Zn (2+) to Al (3+) ratio in the plating solution on the purity and crystallinity of the LDH films deposited was systematically studied using X-ray diffraction and energy dispersive spectroscopy (EDS). The optimum deposition potential to deposit pure and well-ordered Zn-Al LDH films was E = -1.65V versus a Ag/AgCl in 4 M KCl reference electrode at room temperature using a solution containing 12.5 mM Zn(NO 3) 2.6H 2O and 7.5 mM Al(NO 3) 3.9H 2O with pH adjusted to 3.8. The resulting film contained 39 atomic %Al (3+) ions replacing Zn (2+) ions, leading to a composition of Zn 0.61Al 0.39(OH) 2(NO 3) 0.39. xH 2O. Increasing or decreasing the aluminum concentration in the plating solution resulted in the formation of aluminum- or zinc-containing impurities, respectively, instead of varying aluminum content incorporated into the LDH phase. Choosing an optimum deposition potential was important to obtain LDH as a pure phase in the film. When the potential more negative than the optimum potential is used, zinc metal or zinc hydroxide was deposited as a side product, whereas making the potential less negative than the optimum potential resulted in the formation of zinc oxide as the major phase. The pH condition of the plating solution was also critical, as increasing pH destabilizes the formation of the LDH phase while decreasing pH promoted deposition of other impurities.     

Electrochemical tailoring of lamellar-structured ZnO films by interfacial surfactant templating

Zinc oxide films with ordered lamellar structures can be electrochemically produced by interfacial surfactant templating. This method utilizes amphiphile assemblies at the solid-liquid interface (i.e., the surface of a working electrode) as a template to electrodeposit inorganic nanostructures. To gain the ability to precisely tailor inorganic lamellar structures, the effect of various chemical and electrochemical parameters on the repeat distances, homogeneity, orientation, and quality of the interfacial amphiphilic bilayers were investigated. Surfactants with anionic headgroups (e.g., 1-hexadecanesulfonate sodium salt, dodecylbenzenesulfonate sodium salt, dioctyl sulfosuccinate sodium salt, mono-dodecyl phosphate, and sodium dodecyl sulfate) are critical because they incorporate Zn(2+) ions into their bilayer assemblies as counterions and guide the lamellar growth of ZnO films. Unlike surfactant structures in solution, the interfacial surfactant assemblies are insensitive to the surfactant concentration in solution. The use of organic cosolvents (e.g., ethylene glycol, dimethyl sulfoxide) can increase the homogeneity of bilayer assemblies when multiple repeat distances are possible in a pure aqueous medium. In addition, organic cosolvents can make the interfacial structure responsive to the change in bulk surfactant concentrations. The presence of quaternary alkylammonium salts (e.g., cetyltrimethylammonium bromide) as cationic cosurfactants improves the ordering of anionic bilayers significantly. Consequently, it also affects the orientation of lamellar structures relative to the substrate as well as the surface texture of the films. The quality of lamellar structures incorporated in ZnO films is also dependent on the deposition potentials that determine deposition rates. A higher degree of ordering is achieved when a slower deposition rate (I < 0.15 mA/cm(2)) is used. The results described here will provide a useful foundation to design and optimize synthetic conditions for the electrochemical construction of broader types of inorganic nanostructures.