Template- and pH-directed assembly of diruthenium diphosphonates with different topologies and oxidation states

In the presence of organic templates, six diruthenium diphosphonates, namely, [H3N(CH2)3NH3]2[Ru2(hedp)2] (1), [H3N(CH2)4NH3]2[Ru2(hedp)2].4H2O (2), [H3N(CH2)5NH3]2[Ru2(hedp)2].4H2O (3), [H3N(CH2)3NH3][Ru2(hedp)(hedpH)].H2O (4), [H3N(CH2)4NH3][Ru2(hedpH(0.5))2].2H2O (5), and [H3N(CH2)5NH3]2[Ru2(hedp)2][Ru2(hedpH)2]] (6) [hedp = 1-hydroxyethylidenediphosphonate, CH3C(OH)(PO3)2] have been synthesized under hydrothermal conditions. Compounds 1-3 contain homovalent paddlewheel cores of Ru2(II,II)(hedp)2(4-) that are connected through edge-sharing of the [RuO5Ru] octahedra, resulting in infinite linear chains. Compounds 4-6 contain mixed-valent diruthenium(II,III) phosphonate paddlewheel cores of Ru2(II,III)(hedpH(n))2(3-2n)- that are connected by phosphonate oxygen atoms, forming distorted square-grid layers in 4 and 6 or a kagomé lattice in 5. Both the templates and the pH values are found to play important roles in directing the final products with particular topologies and oxidation states of the diruthenium unit. The magnetic studies show that weak antiferromagentic interactions are propagated between the homovalent diruthenium units in compounds 1-3. For compounds 4-6, weak ferromagnetic interactions are observed.     

Rhenium(V) oxocomplexes with novel pyrazolyl-based N4- and N3S-donor chelators

The novel pyrazolyl-based ligands 3,5-Me2pz(CH2)2NH(CH2)2NH(CH2)2NH2 and pz*(CH2)2NH-Gly-CH2STrit (pz*=pz, 3,5-Me2pz, 4-(EtOOC)CH(2)-3,5-Me2pz) were synthesized, and their suitability to stabilize Re(V) oxocomplexes was evaluated using different starting materials, namely (NBu4)[ReOCl4], [ReOCl3(PPh3)2] and trans-[ReO2(py)4]Cl. Compound reacts with trans-[ReO2(py)4]Cl yielding the cationic compound [ReO(OMe){3,5-Me2pz(CH2)2N(CH2)2NH(CH2)2NH2}](BPh4) in a low isolated yield. In contrast, the neutral complexes [ReO{pz*(CH2)2NH-Gly-CH2S}] (pz*=pz, 3,5-Me2pz, 4-(EtOOCCH2)-3,5-Me2pz) were synthesized almost quantitatively by reacting [ReOCl3(PPh3)2] or (NBu4)[ReOCl4] with the trityl-protected chelators. The X-ray diffraction analysis of and confirmed the tetradentate coordination mode of the respective ancillary ligands. In the monoanionic chelator coordinates to the metal through four nitrogen atoms, while in the chelator is trianionic, coordinating to the metal through three nitrogens and one sulfur atom. Solution NMR studies of , including two-dimensional NMR techniques (1H COSY and 1H/13C HSQC), confirmed that the N3S coordination mode of the chelators is retained in solution. Unlike , complexes may be considered relevant in the development of radiopharmaceuticals, as further corroborated by the synthesis of the congener [99mTcO{pz(CH2)2-NH-Gly-CH2S}]. This radioactive compound was obtained from 99mTcO4- in aqueous medium, in almost quantitative yield and with high specific activity and radiochemical purity.     

Synthesis, structural characterization, gas sorption and guest-exchange studies of the lightweight, porous metal-organic framework alpha-[Mg3(O2CH)6

Unsolvated magnesium formate crystallizes upon reaction of the metal nitrate with formic acid in DMF at elevated temperatures. Single-crystal XRD studies reveal the formation of [Mg3(O2CH)6 [symbol: see text] DMF], 1, a metal-organic framework with DMF molecules filling the channels of an extended diamondoid lattice. The DMF molecules in 1 can be entirely removed without disruption to the framework, giving the guest-free material alpha-[Mg3(O2CH)6], 2. Compound 2 has been characterized by both powder and single-crystal XRD studies. Thermogravimetric analyses of 1 show guest loss from 120 to 190 degrees C, with decomposition of the sample at approximately 417 degrees C. Gas sorption studies using both N2 and H2 indicate that the framework displays permanent porosity. The porosity of the framework is further demonstrated by the ability of 2 to uptake a variety of small molecules upon soaking. Single-crystal XRD studies have been completed on the six inclusion compounds [Mg3(O2CH)6 [symbol: see text] THF], 3; [Mg3(O2CH)6 [symbol: see text] Et2O], 4; [Mg3(O2CH)6 [symbol: see text] Me2CO], 5; [Mg3(O2CH)6 [symbol: see text] C6H6], 6; [Mg3(O2CH)6 [symbol: see text] EtOH], 7; and [Mg3(O2CH)(6) [symbol: see text] MeOH], 8. Analyses of the metrical parameters of 1-8 indicate that the framework has the ability to contract or expand depending on the nature of the guest present.     

Synthesis and characterization of methylammonium borohydride

A new borohydride, [CH(3)NH(3)](+)[BH(4)](-), has been synthesized through the metathesis of CH(3)NH(3)F and NaBH(4) in methylamine. Room-temperature X-ray diffraction studies have shown that [CH(3)NH(3)](+)[BH(4)](-) adopts a tetragonal unit cell with considerable hydrogen mobility similar to that observed in NH(3)BH(3). The kinetics and thermodynamics of hydrogen release have been investigated and were found to follow a similar pathway to that of [NH(4)](+)[BH(4)](-). Decomposition of [CH(3)NH(3)](+)[BH(4)](-) occurred slowly at room temperature and rapidly at ca. 40 °C to form [BH(2)(CH(3)NH(2))(2)](+)[BH(4)](-), the methylated analogue of the diammoniate of diborane. The decomposition has been investigated by means of in situ X-ray diffraction and solid state (11)B NMR spectroscopy and occurred in the absence of any detectable intermediates to form crystalline [BH(2)(CH(3)NH(2))(2)](+)[BH(4)](-). [(CH(3))(2)NH(2)](+)[BH(4)](-) and [BH(2){(CH(3))(2)NH}(2)](+)[BH(4)](-) have also been synthesized through analogous routes, indicating a more general applicability of the synthetic method.     

Electronic structure of iron chlorins: characterization of bis(l-valine methyl ester)(meso-tetraphenylchlorin)iron(III)triflate and bis(l-valine methyl ester)(meso-tetraphenylchlorin)iron(II)

The synthesis and characterization of the two iron chlorin complexes [Fe(III)(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) and Fe(II)(TPC)[(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2))](2) (2) are reported. The crystal structure of complex 1 has been determined. The X-ray structure shows that the porphyrinate rings are weakly distorted. The metal-nitrogen distances to the reduced pyrrole N(4), 2.034(4) A, and to the pyrrole trans to it N(2), 2.012(4) A, are longer than the distances to the two remaining nitrogens [N(1), 1.996(4) A, and N(3), 1.984(4) A], leading to a core-hole expansion of the macrocycle due to the reduced pyrrole. The (1)H NMR isotropic shifts at 20 degrees C of the different pyrrole protons of 1 varied from -0.8 to -48.3 ppm according to bis-ligated complexes of low-spin ferric chlorins. The EPR spectrum of [Fe(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) in solution is rhombic and gives the principal g values g(1) = 2.70, g(2) = 2.33, and g(3) = 1.61 (Sigmag(2) = 15.3). These spectroscopic observations are indicative of a metal-based electron in the d(pi) orbital for the [Fe(TPC)(NH(2)CH(CO(2)CH(3))(CH(CH(3))(2)))(2)]CF(3)SO(3) (1) complex with a (d(xy))(2)(d(xz)d(yz))(3) ground state at any temperature. The X-ray structure of the ferrous complex 2 also shows that the porphyrinate rings are weakly distorted. The metal-nitrogen distances to the reduced pyrrole N(4), 1.991(5) A, and to the pyrrole trans to it N(2), 2.005(6) A, are slightly different from the distances to the two remaining nitrogens [N(1), 1.988(5) A, and N(3), 2.015(5) A], leading to a core-hole expansion of the macrocycle due to the reduced pyrrole.     

An organically templated iron sulfate with a distorted Kagome lattice exhibiting unusual magnetic properties

A layered iron sulfate of the composition [H3N(CH2)2NH2(CH2)2NH2(CH2)2NH3][FeII3F6(SO4)2], possessing a distorted Kagome lattice, prepared hydrothermally, is found to exhibit magnetic hysteresis like a ferrimagnet besides the characteristics of a frustrated system, like those of a spin glass.     

Reduction of (imine)Pt(IV) to (imine)Pt(II) complexes with carbonyl-stabilized phosphorus ylides

A novel method is reported for generation of the difficult-to-obtain (imine)Pt(II) compounds that involves reduction of the corresponding readily available Pt(IV)-based imines by carbonyl-stabilized phosphorus ylides, Ph3P=CHCO2R, in nonaqueous media. The reaction between neutral (imino)Pt(IV) compounds [PtCl4[NH=C(Me)ON=CR1R2]2] [R1R2 = Me2, (CH2)4, (CH2)5, (Me)C(Me)=NOH], [PtCl4[NH=C(Me)ONR2]2] (R = Me, Et, CH2Ph), (R1 = H; R2 = Ph or C6H4Me; R3 = Me) as well as anionic-type platinum(IV) complexes (Ph3PCH2Ph)[PtCl5[NH=C(Me)ON=CR2]] [R2 = Me2, (CH2)4, (CH2)5] and 1 equiv of Ph3P=CHCO2R (R = Me, Et) proceeds under mild conditions (ca. 4 h, room temperature) to give selectively the platinum(II) products (in good to excellent isolated yields) without further reduction of the platinum center. All thus prepared compounds (excluding previously described Delta4-1,2,4-oxadiazoline complexes) were characterized by elemental analyses, FAB mass spectrometry, IR and 1H, 13C[1H], 31P[1H] and 195Pt NMR spectroscopies, and X-ray single-crystal diffractometry, the latter for [PtCl2[NH=C(Me)ON=CMe2]2] [crystal system tetragonal, space group P4(2)/n (No. 86), a = b = 10.5050(10) A, c = 15.916(3) A] and (Ph3PCH2CO2Me)[PtCl3(NCMe)] [crystal system orthorhombic, space group Pna2(1) (No. 33), a = 19.661(7) A, b = 12.486(4) A, c = 10.149(3) A]. The reaction is also extended to a variety of other Pt(II)/Pt(IV) couples, and the ylides Ph3P=CHCO2R are introduced as mild and selective reducing agents of wide applicability for the conversion of Pt(IV) to Pt(II) species in nonaqueous media, a route that is especially useful in the case of compounds that cannot be prepared directly from Pt(II) precursors, and for the generation of systematic series of Pt(II)/Pt(IV) complexes for biological studies.     

Rhenium(V) and technetium(V) complexes with phosphoraneimine and phosphoraneiminato ligands

Air-stable rhenium(V) nitrido complexes are formed when [ReOCl3(PPh3)2], [NBu4][ReOCl4], or [NBu4][ReNCl4] are treated with an excess of silylated phosphoraneiminates of the composition Me3SiNPPh3 or Ph2P(NSiMe3)CH2PPh2 in CH2Cl2. Complexes of the compositions [ReNCl(Ph2PCH2PPh2NH)2]Cl (1), [ReN(OSiMe3)(Ph2PCH2PPh2NH)2]Cl (2) or [ReNCl2(PPh3)2] (3) were isolated and structurally characterized. The latter compound was also produced during a reaction of the rhenium(III) precursor [ReCl3(PPh3)2(CH3CN)] and Me3SiNPPh3. Nitrogen transfer from the phosphorus to the rhenium atoms and the formation of nitrido ligands were observed in all examples. All products of reactions with an excess of the potentially chelating phosphoraneiminate Me3SiNP(Ph2)CH2PPh2 contain neutral Ph2PCH2PPh2NH ligands. The required protons are supplied by a metal-induced decomposition of the solvent dichloromethane. The Re-N(imine) bond lengths (2.055-2.110 A) indicate single bonds, whereas the N-P bond with lengths between 1.596 A and 1.611 A reflect considerable double bond character. An oxorhenium(V) phosphoraneiminato complex, the dimeric compound [ReOCl2(mu-N-Ph2PCH2PPh2N)]2 (4), is formed during the reaction of [NBu4][ReOCl4] with an equivalent amount of Ph2P(NSiMe3)CH2PPh in dry acetonitrile. The blue neutral complex with two bridging phosphoraneiminato units is stable as a solid and in dry solvents. It decomposes in solution, when traces of water are present. The rhenium-nitrogen distances of 2.028(3) and 2.082(3) A are in the typical range of bridging phosphoraneiminates and an almost symmetric bonding mode. Technetium complexes with phosphoraneimine ligands were isolated from reactions of [NBu4][TcOCl4] with Me3SiNPPh3, and [NBu4][TcNCl4] with Me3SiNP(Ph2)CH2PPh2. Nitrogen transfer and the formation of a five-coordinate nitrido species, [TcNCl2(HNPPh3)2] (5), was observed in the case of the oxo precursor, whereas reduction of the technetium(VI) starting material and the formation of the neutral technetium(V) complex [TcNCl2(Ph2PCH2PPh2NH)] (6) or [TcNCl(Ph2PCH2PPh2NH)2]Cl (7) was observed in the latter case. Both technetium complexes are air stable and X-ray structure determinations show bonding modes of the phosphoraneimines similar to those in the rhenium complexes.     

Tautomerization of methyldiazene to formaldehyde-hydrazone in ruthenium and osmium complexes

Mixed-ligand hydrazine complexes [M(CO)(RNHNH2)P4](BPh4)2 (1, 2) [M = Ru, Os; R = H, CH3, C6H5; P = P(OEt)3] with carbonyl and triethyl phosphite were prepared by allowing hydride [MH(CO)P4]BPh4 species to react first with HBF4.Et2O and then with hydrazines. Depending on the nature of the hydrazine ligand, the oxidation of [M(CO)(RNHNH2)P4](BPh4)2 derivatives with Pb(OAc)4 at -30 C gives acetate [M(kappa1-OCOCH3)(CO)P4]BPh4 (3a), phenyldiazene [M(CO)(C6H5N=NH)P4](BPh4)2 (3c, 4c), and methyldiazene [M(CO)(CH3N=NH)P4](BPh4)2 (3b, 4b) derivatives. Methyldiazene complexes 3b and 4b undergo base-catalyzed tautomerization of the CH3N=NH ligand to formaldehyde-hydrazone NH2N=CH2, giving the [M(CO)(NH2N=CH2)P4](BPh4)2 (5, 6) derivatives. Complexes 5 and 6 were characterized spectroscopically and by the X-ray crystal structure determination of the [Ru(CO)(NH2N=CH2)[P(OEt)3]4](BPh4)2 (5) derivative. Acetone-hydrazone [M(CO)[NH2N=C(CH3)2]P4](BPh4)2 (7, 8) complexes were also prepared by allowing hydrazine [M(CO)(NH2NH2)P4](BPh4)2 derivatives to react with acetone.     

High-pressure- and low-temperature-induced changes in [(CH3)2NH(CH2)2NH3][SbCl5

The structure of N,N-dimethylethylenediammonium pentachloroantimonate(III), [(CH3)2NH(CH2)2NH3][SbCl5], NNDP, was investigated at 100 and 15 K at ambient pressure, as well as at pressures up to 4.00 GPa at room temperature in the diamond-anvil cell. The stable structure at low temperatures and low pressures consists of isolated [SbCl5]2- anions and [(CH3)2NH(CH2)2NH3]2+ cations. The inorganic anions have a distorted square pyramidal geometry. They are arranged in linear chains parallel to the c axis. In contrast to the low-temperature studies, where no phase transition was detected, pressure induces a P2(1)/c --> P2(1)/n phase transition between 0.55 and 1.00 GPa, accompanied by a doubling of the a unit-cell parameter. This solid-solid transition results from changes in the electron configuration of the Sb(III) atom and formation of the Sb-Cl bridging bonds between inorganic polyhedra to form, at approximately 1.0 GPa, isolated [Sb2Cl10]4- units consisting of [SbCl6]3- octahedra and [SbCl5]2- square pyramids connected by a common corner. The intermolecular distances continuously decrease with further increase in pressure, and at approximately 3.1 GPa, zigzag [{SbCl5}n]2n- chains containing corner-sharing [SbCl6]3- octahedra are formed. The unit-cell volume of NNDP decreases by 18.15% between room pressure and 4.00 GPa. The linear distortions of the [SbCl5]2- and [SbCl6]3- polyhedra decrease with increasing pressure and decreasing temperature and indicate a reduction in the stereochemical activity of the lone electron pair on the Sb(III) atom.     

Vanadium-based, extended catalytic lifetime catechol dioxygenases: evidence for a common catalyst

In 1999, a catechol dioxygenase derived from a V-polyoxometalate was reported which was able to perform a record >100 000 total turnovers of 3,5-di-tert-butylcatechol oxygenation using O2 as the oxidant (Weiner, H.; Finke, R. G. J. Am. Chem. Soc. 1999, 121, 9831). An important goal is to better understand this and other vanadium-based catechol dioxygenases. Scrutiny of 11 literature reports of vanadium-based catechol dioxygenases yielded the insight that they all proceed with closely similar selectivities. This, in turn, led to a "common catalyst hypothesis" for the broad range of vanadium based catechol dioxygenase precatalysts presently known. The following three classes of V-based compounds, 10 complexes total, have been explored to test the common catalyst hypothesis: (i) six vanadium-based polyoxometalate precatalysts, (n-Bu4N)4H5PV14O42, (n-Bu4N)7SiW9V3O40, (n-Bu4N)5[(CH3CN)(x)Fe(II).SiW9V3O40], (n-Bu4N)9P2W15V3O62, (n-Bu4N)5Na2[(CH3CN)(x)Fe(II).P2W15V3O62], and (n-Bu4N)4H2-gamma-SiW10V2O40; (ii) three vanadium catecholate complexes, [V(V)O(DBSQ)(DTBC)]2, [Et3NH]2[V(IV)O(DBTC)2].2CH3OH, and [Na(CH3OH)2]2[V(V)(DTBC)3]2.4CH3OH (where DBSQ = 3,5-di-tert-butylsemiquinone anion and DTBC = 3,5-di-tert-butylcatecholate dianion), and (iii) simple VO(acac)2. Product selectivity studies, catalytic lifetime tests, electron paramagnetic resonance spectroscopy (EPR), negative ion mode electrospray ionization-mass spectrometry (negative ion ESI-MS), and kinetic studies provided compelling evidence for a common catalyst or catalyst resting state, namely, Pierpont's structurally characterized vanadyl semiquinone catecholate dimer complex, [VO(DBSQ)(DTBC)]2, formed from V-leaching from the precatalysts. The results provide a considerable simplification and unification of a previously disparate literature of V-based catechol dioxygenases.     

Studies relevant to catalytic reduction of dinitrogen to ammonia by molybdenum triamidoamine complexes

In this paper we explore several issues surrounding the catalytic reduction of dinitrogen by molybdenum compounds that contain the [(HIPTNCH2CH2)3N]3- ligand (where HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3). Four additional plausible intermediates in the catalytic dinitrogen reduction have now been crystallographically characterized; they are MoN= NH (Mo = [(HIPTNCH2CH2)3N]Mo), [Mo=NNH2][BAr'4] (Ar' = 3,5-(CF3)2C6H3), [Mo=NH][BAr'4], and Mo(NH3). We also have crystallographically characterized a 2,6-lutidine complex, Mo(2,6-Lut)+, which is formed upon treatment of MoH with [2,6-LutH][B(C6F5)4]. We focus on the synthesis of compounds that have not yet been isolated, which include Mo=NNH2, Mo=NH, and Mo(NH2). Mo=NNH2, formed by reduction of [Mo=NNH2]+, has not been observed. It decomposes to give mixtures that contain two or more of the following: MoN=NH, Mo triple bond N, Mo(NH3)+, Mo(NH3), and ammonia. Mo=NH, which can be prepared by reduction of [Mo=NH]+, is stable for long periods in the presence of a small amount of CrCp*2, but in the absence of CrCp*2, and in the presence of Mo=NH+ as a catalyst, Mo=NH is slowly converted into a mixture of Mo triple bond N and Mo(NH2). Mo(NH2) can be produced independently by deprotonation of Mo(NH3)+ with LiN(SiMe3)2 in THF, but it decomposes to Mo triple bond N upon attempted isolation. Although catalytic reduction of dinitrogen could involve up to 14 intermediates in a "linear" sequence that involves addition of "external" protons and/or electrons, it seems likely now that several of these intermediates, along with ammonia and/or dihydrogen, can be produced in several reactions between intermediates that themselves behave as proton and/or electron sources.     

Chemistry of re with N,N'-bis(2-pyridylmethyl)ethylenediamine (H2pmen): hydrolysis, dehydrogenation, and ternary complexes

A number of Re complexes with N,N'-bis(2-pyridylmethyl)ethylenediamine (H2pmen) have been made from [NH4][ReO4]. [ReOCl2(H2pmen)]Cl, [ReOCl(Hpmen)][ReO4], and [ReO2(H2pmen)][ReO4] are related by hydrolysis/HCl substitution. [ReOCl(Hpmen)][ReO4] was structurally characterized and found to contain a water-stable amido-Re bond. Dehydrogenation of the N-donor ligand from each amine to imine with concomitant two-electron reduction of the Re center occurs readily in these systems. With suitable 3-hydroxy-4-pyrones, ternary complexes such as [ReIIICl(ma)(C14H14N4)][ReO4].CH3OH, 5, were made from [NH4][ReO4], H2pmen.4HCl and pyrones in one-pot syntheses. 5, a seven-coordinate ReIII complex, was structurally characterized.     

Imido Complexes Derived from the Reactions of Niobium and Tantalum Pentachlorides with Primary Amines: Relevance to the Chemical Vapor Deposition of Metal Nitride Films

Reactions of niobium and tantalum pentachlorides with tert-butylamine (>/=6 equiv) in benzene afford the dimeric imido complexes [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) (90%) and [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) (79%). The niobium complex exists as two isomers in solution, while the tantalum complex is composed of three major isomers and at least two minor isomers. Analogous treatments with isopropylamine (>/=7 equiv) give the monomeric complexes NbCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2) (84%) and TaCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2) (84%). The monomeric complexes are unaffected by treatment with excess isopropylamine, while the dimeric complexes are cleaved to the monomers MCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)(2) upon addition of excess tert-butylamine in chloroform solution. Treatment of niobium and tantalum pentachlorides with 2,6-diisopropylaniline affords insoluble precipitates of [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (100%) and [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[TaCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (100%), which react with 4-tert-butylpyridine to afford the soluble complexes [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (45%) and [4-t-C(4)H(9)C(5)H(4)NH](2)[TaCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] (44%). Sublimation of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), MCl(2)(N(i)Pr)(NH(i)Pr)(NH(2)(i)Pr)(2), and [NH(3)(2,6-(CH(CH(3))(2))(2)C(6)H(3))](2)[MCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] leads to decomposition to give [MCl(3)(NR)(NH(2)R)](2) as sublimates (32-49%), leaving complexes of the proposed formulation MCl(NR)(2) as nonvolatile residues. By contrast, [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) sublimes without chemical reaction. Analysis of the organic products obtained from thermal decomposition of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2) showed isobutylene and tert-butylamine in a 2.2:1 ratio. Mass spectra of [NbCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), [TaCl(2)(N(t)Bu)(NH(t)Bu)(NH(2)(t)Bu)](2), and [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2) showed the presence of dimeric imido complexes, monomeric imido complexes, and nitrido complexes, implying that such species are important gas phase species in CVD processes utilizing these molecular precursors. The crystal structures of [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))], [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2), [NbCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2), and [TaCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) were determined. [4-t-C(4)H(9)C(5)H(4)NH](2)[NbCl(5)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))] crystallizes in the space group P2(1)/c with a = 12.448(3) ?, b = 10.363(3) ?, c = 28.228(3) ?, beta = 94.92(1) degrees, V = 3628(5) ?(3), and Z = 4. [NbCl(3)(N(i)Pr)(NH(2)(i)Pr)](2) crystallizes in the space group P2(1)/c with a = 9.586(4) ?, b = 12.385(4) ?, c = 11.695(4) ?, beta = 112.89(2) degrees, V = 1279.0(6) ?(3), and Z = 2. [NbCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) crystallizes in the space group P2(1)/n with a = 10.285(3) ?, b = 11.208(3) ?, c = 23.867(6) ?, beta = 97.53 degrees, V = 2727(1) ?(3), and Z = 2. [TaCl(3)(N(2,6-(CH(CH(3))(2))(2)C(6)H(3)))(NH(2)(2,6-(CH(CH(3))(2))(2)C(6)H(3)))](2) crystallizes in the space group P2(1)/n with a = 10.273(1) ?, b = 11.241(2) ?, c = 23.929(7) ?, beta = 97.69(2) degrees, V = 2695(2) ?(3), and Z = 2. These findings are discussed in the context of niobium and tantalum nitride film depositions from molecular precursors.     

Ammonium, alkylammonium, and amino acid complexes of a hexacopper fluoro-metallacrown cavitand

Reaction of CuF2 with one equivalent of 3{5}-(pyrid-2-yl)-5{3}-(tertbutyl)pyrazole (HL) and excess NH4OH in MeOH affords crystalline [NH4{Cu(micro-F)(microL)}6(CH2Cl2)2]HF2 in moderate yield. This compound contains the 12-MC-6 metallacrown [{Cu(micro-F)(micro-L)}6] (1) with a NH4 + ion at its center, and CH2Cl2 molecules complexed in bowl-shaped cavities above and below the Cu6F6 ring. Similar reactions using the bases MeNH2, glycine, l-alanine or beta-alanine afforded solvated crystals of [1(H3NMe)2]Cl2, [1(gly)2], [1(l-ala)2], and [1(beta-ala)2], respectively. The metallacrown 1 in these products contains methylammonium and zwitterionic amino-acid guests in its two bowl-shaped cavities; each of the amino acids hydrogen-bonds to three F atoms. A related reaction using 1,6-diaminohexane resulted in fixation of CO2 from the air to give solvated [1(H3NC6H12NHCO2)2], again with a zwitterionic guest. NMR, ESI-MS and UV/vis measurements suggest that the metallacrown 1 retains its integrity in several organic solvents, although it is unclear to what extent guest binding takes place in solution.     

双取代铵氧化物(R2HNO)与双取代羟胺(R2NOH)的 相互转换机制的量子化学研究

在B3LYP/6-311＋＋G(d,p)水平下, 首次对一系列双取代铵氧化物(R2HNO)与双取代羟胺(R2NOH) [R＝CH3, NH2, OH, F, CH2CH3, CH(CH3)2, C(CH3)3]同分异构体的相互转换机制进行了理论计算研究, 并与已知的H3NO和H2NOH进行了比较. 结果表明, 相对于双取代羟胺(R2NOH), 按照H＜CH3＜NH2＜OH＜F的顺序, 增加取代基R的电负性有助于提高双取代铵氧化物(R2HNO)的热力学和动力学稳定性. 此外, 对烷基取代基R [R＝CH3, CH2CH3, CH(CH3)2, C(CH3)3], 其空间位阻越大越能增加双取代铵氧化物(R2HNO)的热力学稳定性, 动力学稳定性也有相应增加, 但不显著. 对所研究的7种取代基[R＝CH3, NH2, OH, F, CH2CH3, CH(CH3)2, C(CH3)3], R2HNO向R2NOH转换的能垒介于27.0～56.3 kcal/mol之间, 表明在气相条件下极有可能观测到双取代铵氧化物(R2HNO).     

Open-framework aluminoborates co-templated by two types of primary amines

A series of open-framework aluminoborates (ABOs), [CH(3)NH(3)][(CH(3)CH(2))(2)NH(2)][Al(B(5)O(10))] (1), [CH(3)CH(2)NH(3)][(CH(3)CH(2))(2)NH(2)][Al(B(5)O(10))] (2), [CH(3)CH(2)NH(3)][(CH(3))(2)NH(2)](H(2)O)(0.5)[Al(B(5)O(10))] (3) and [CH(3)NH(3)][CH(3)CH(2)NH(3)](H(2)O)(2)[Al(B(5)O(10))] (4) have been made co-templated by two types of primary amines under solvothermal conditions and characterized by elemental analysis, IR, TGA, UV-Vis, powder XRD, single crystal XRD and NLO determination, respectively. These four ABOs display two structural types: 1, 2 and 3 are isostructural and exhibit CrB(4) topology, showing three different layers along three different directions; while 4 contains 8-, 14-ring layers, which are packed along the [001] direction to form a noncentrosymmetric 3D framework with 8-, 14-ring channels, showing second harmonic generation (SHG) response that is about 0.5 times that of KDP (KH(2)PO(4)). The electronic structure calculations for 1 and 4 also have been performed.     

Thermodynamic characterization of the biocompatible ionic liquid effects on protein model compounds and their functional groups

The stability of proteins under co-solvent conditions is dependant on the nature of the co-solvent; the co-solvent can alter a protein's properties and structural effects through bimolecular interactions between its functional groups and co-solvent particles. Ionic liquids (ILs) represent a rather diverse class of co-solvents that are combinations of different ions, which are liquids at or close to room temperature. To quantify the bimolecular interactions of protein functional groups with biocompatible ILs, we report the systematic and quantitative apparent transfer free energies (ΔG'(tr)) of a homologous series of cyclic dipeptides (CDs) from water to aqueous solutions of ILs through solubility measurements, as a function of IL concentration at 25 °C under atmospheric pressure. The materials investigated in the present work included the CDs of cyclo(Gly-Gly), cyclo(Ala-Gly), cyclo(Ala-Ala), cyclo(Leu-Ala), and cyclo(Val-Val). The ILs used such as diethylammonium acetate ([Et(2)NH][CH(3)COO], DEAA), triethylammonium acetate ([Et(3)NH][CH(3)COO], TEAA), diethylammonium dihydogen phosphate ([Et(3)NH][H(2)PO(4)], DEAP), triethylammonium dihydogen phosphate ([Et(3)NH][H(2)PO(4)], TEAP), diethylammonium sulfate ([Et(3)NH][HSO(4)], DEAS) and triethylammonium sulfate ([Et(3)NH][HSO(4)], TEAS). We observed positive values of ΔG'(tr) for CDs from water to ILs, indicating that interactions between ILs and CDs are unfavourable, which leads to stabilization of the native structure of CDs. The experimental results were further used for estimating the transfer free energies (Δg'(tr)) of the peptide bond (-CONH-), the peptide backbone unit (-CH(2)C=ONH-), and various functional groups from water to IL solutions. Our results explicitly elucidate that a series of all ammonium ILs act as stabilizers for tested model compounds through the exclusion of ILs from CDs surface.     

Synthesis and reactivity of the monomeric late-transition-metal parent amido complex [Ir(Cp*)(PMe3)(Ph)(NH2)

The late-transition-metal parent amido compound [Ir(Cp*)(PMe3)(Ph)(NH2)] (2) has been synthesized by deprotonation of the corresponding ammine complex [Ir(Cp*)(PMe3)(Ph)(NH3)][OTf] (6) with KN(SiMe3)2. An X-ray structure determination has ascertained its monomeric nature. Proton-transfer studies indicate that 2 can successfully deprotonate p-nitrophenylacetonitrile, aniline, and phenol. Crystallographic analysis has revealed that the ion pair [Ir(Cp*)(PMe3)(Ph)(NH3)][OPh] (8) exists as a hydrogen-bonded dimer in the solid state. Reactions of 2 with isocyanates and carbodiimides lead to overall insertion of the heterocumulenes into the N--H bond of the Ir-bonded amido group, demonstrating the ability of 2 to act as an efficient nucleophile. Intriguing reactivity is observed when amide 2 reacts with CO or 2,6-dimethylphenyl isocyanide. eta4-Tetramethylfulvene complexes [Ir(eta4-C5Me4CH2)(PMe3)(Ph)(L)] (L=CO (15), CNC6H3-2,6-(CH3)2 (16)) are formed in solution through displacement of the amido group by the incoming ligand followed by deprotonation of a methyl group on the Cp* ring and liberation of ammonia. Conclusive evidence for the presence of the Ir-bonded eta4-tetramethylfulvene moiety in the solid state has been provided by an X-ray diffraction study of complex 16.