新型复合介孔材料HPMo/SBA-15的合成与表征

合成了一种新型复合介孔材料HPMo/SBA-15, 通过XRD, TEM, UV-Vis和IR等方法表征证明HPMo均匀且稳定地包藏到介孔材料SBA-15的由SiO2网络组成的孔壁中. 催化实验结果表明, 该材料在大分子催化裂化反应中具有很高的活性, 在大分子催化氧化反应中连续循环使用未发现活性组分流失, 显示了其在大分子催化和均相催化反应多相化中具有很好的应用前景.     

银离子修饰的介孔磷钨酸/二氧化硅催化剂氧化脱硫性能研究(英文)

采用银修饰介孔磷钨酸/二氧化硅(mesoporous HPW/SiO2)催化剂,并研究了其在模拟柴油和真实柴油氧化脱硫反应中的催化性能.通过银修饰介孔HPW/SiO2,结合银离子对有机硫化物的选择吸附性和HPW对有机硫化物的催化氧化活性,以达到选择氧化脱硫的目的.模拟柴油分别采用石油醚、苯、1-辛烯和二苯并噻吩配制,当银离子与HPW的摩尔比为2时,催化剂具有最高的选择催化氧化活性.采用N2 吸附-脱附、XRD、UV-vis和EDS表征了银修饰的介孔HPW/SiO2催化剂,结果表明,银物种分散均匀且以Ag+形式存在.真实柴油的脱硫研究表明,相比介孔HPW/SiO2催化剂,修饰的催化剂介孔Ag2-HPW/SiO2脱硫率提高了4.6%,初始硫含量为1800×10-6的直馏柴油能被脱除至228×10-6,脱硫率为87.3%.介孔Ag2-HPW/SiO2催化剂具有良好的再生性能,经再生处理后,Ag的损失量极少,其三次脱硫率达到84.8%.     

介孔沸石材料

介孔沸石材料是含有丰富介孔的结晶沸石,不仅保留了沸石材料优良的酸性和水热稳定性,而且由于介孔的引入改善了其对大分子的吸附和扩散性能,在催化领域特别是涉及大分子的催化反应中是极有应用前景的材料。本文综述了介孔沸石材料的制备方法并进行了比较分析,概述了近年来介孔沸石材料在不同催化反应中的应用,探讨了介孔沸石材料今后的研究方向。     

双杂原子介孔材料的合成及催化应用

在强酸性条件下,采用沸石前驱体溶液与表面活性剂自组装的方法,合成双杂原子掺杂的介孔催化材料Sn/Ti-MS-1. 表征结果显示,Sn/Ti-MS-1具有典型的介孔结构,骨架中含有TS-1沸石的结构单元. 在苯酚和2,3,6-三甲基苯酚的双氧水氧化反应中,焙烧前后的Sn/Ti-MS-1均表现出了良好的催化反应活性,表明其钛物种具有良好的热稳定性,并且在大分子氧化反应应用中具有明显的优势. 同时,这种Sn/Ti双杂原子介孔材料显示了较快的催化反应速率.     

银离子修饰的介孔磷钨酸/二氧化硅催化剂氧化脱硫性能研究

采用银修饰介孔磷钨酸/二氧化硅（mesoporous HPW/SiO₂）催化剂,并研究了其在模拟柴油和真实柴油氧化脱硫反应中的催化性能。通过银修饰介孔HPW/SiO₂,结合银离子对有机硫化物的选择吸附性和HPW对有机硫化物的催化氧化活性,以达到选择氧化脱硫的目的。模拟柴油分别采用石油醚、苯、1-辛烯和二苯并噻吩配制,当银离子与HPW的摩尔比为2时,催化剂具有最高的选择催化氧化活性。采用N₂ 吸附-脱附、XRD、UV-vis和EDS表征了银修饰的介孔HPW/SiO₂催化剂,结果表明,银物种分散均匀且以Ag⁺形式存在。真实柴油的脱硫研究表明,相比介孔HPW/SiO₂催化剂,修饰的催化剂介孔Ag₂-HPW/SiO₂脱硫率提高了4.6%,初始硫含量为1800×10^-6的直馏柴油能被脱除至228×10^-6,脱硫率为87.3%。介孔Ag₂-HPW/SiO₂催化剂具有良好的再生性能,经再生处理后,Ag的损失量极少,其三次脱硫率达到84.8%。     

SO2-4/SiO2表面酸性的红外光谱和密度泛函理论研究

对介孔SiO2及硫酸根促进的SiO2样品进行了原位吡啶吸附红外光谱测试,分别建立了硫酸根促进前后的SiO2表面原子簇模型,用密度泛函理论对其吡啶吸附行为进行了计算,分析了SO2-4/SiO2表面酸性产生的机理. 实验和计算结果表明, SO2-4/SiO2表面不存在Lewis酸中心,原位红外谱图中表征Lewis酸性的特征峰对应于氢键吸附吡啶的环振动,这种氢键作用因SiO2表面的硫酸根促进而得到加强. HSO-4螯合结构为SO2-4/SiO2表面Br(φ)nsted酸中心,其酸强度强于表面磺酸基团修饰的介孔SiO2材料SO3H-MSU, 而弱于HZSM-5. SO2-4/SiO2的酸催化活性源于其表面的Br(φ)nsted酸性.     

两种形貌的介孔SiO2对纤维素内切酶吸附性能的研究

以EDTA2-、SO42-作为反离子分别合成了具有管状和圆盘状结构的介孔SiO2,并测定了2种介孔SiO2焙烧至不同温度时的表面积、孔体积参数,及其等电点;通过752分光光度计在550nm处测定纤维素内切酶的吸光度,研究了2种形貌的介孔SiO2对纤维素内切酶的吸附性能,同时测定了固定酶的活性。结果表明,管状和圆盘状结构的介孔SiO2对纤维素内切酶的吸附等温线分别为Ⅱ和Ⅰ型;介孔SiO2焙烧至700℃时,两者皆为Ⅱ型;至850℃时,前者转化为Ⅰ型,而后者转化为Ⅴ型。吸附等温线类型与介孔SiO2的结构、等电点以及酶分子尺寸与介孔尺寸的相匹配有关。酶经过介孔SiO2吸附固定后,稳定性明显提高;其中,管状结构的介孔SiO2对酶具有最大的负载量,但固定酶的活性却较低。     

磷酸盐辅助一步合成介孔Beta分子筛

在合成纳米Beta分子筛的体系中添加磷酸二氢钠等无机盐,通过一步晶化制备介孔Beta分子筛.纳米分子筛组装形成的二次粒子克服了传统纳米粒子难以过滤分离的问题,同时所形成的粒间介孔改善了分子在催化剂内的扩散从而提高催化反应效率.采用X射线衍射、扫描电镜、氮吸附-脱附和氨程序升温脱附等表征方法对材料进行表征,结果表明磷酸二氢钠的用量对介孔体积有很大影响.当NaH2PO4/SiO2摩尔比为0.1时,合成的材料具有较好的孔结构和酸性,并在叔丁醇与苯酚的液相烷基化反应中表现出最好的催化活性.     

介孔SiO2的改性及对诺维信漆酶的交联固定化

采用十六烷基三甲基溴化铵(CTAB)为模板剂,四乙氧基硅烷(正硅酸乙酯,TEOS)为硅源,硝酸为催化剂来制备介孔SiO2,并采用后嫁接法对介孔SiO2进行氨基化改性。利用红外光谱(IR),X射线粉末衍射(XRD),差热-热重分析(DTA-TG),扫描电镜(SEM),元素分析,微电泳法及N2吸附-脱附方法对改性前后的产物进行表征。结果表明氨基已成功嫁接到介孔SiO2孔道中,改性后的介孔SiO2有序度有所下降,但仍为介孔材料;改性之后介孔材料的孔径、比表面积、孔体积均变小。等电点由原来的2.74变为4.75。本文还以氨基修饰的介孔SiO2为载体,通过交联剂戊二醛固定诺维信(Novozymes)工业级漆酶,并采用正交设计法对固定化条件进行了优化。研究表明漆酶经固定化后,其操作稳定性比游离酶高。     

孔道三维相互连通锐钛矿TiO2-SiO2纳米复合介孔材料的制备及其高光催化活性

本文报道一种孔道三维相互连通锐钛矿TiO2-SiO2纳米复合介孔材料的制备.该介孔材料是以两维六方有序结构、直孔道、锐钛矿70TiO2-30SiO2-950纳米复合介孔材料(于950oC晶化2 h)为前驱体, NaOH为SiO2的刻蚀剂,通过“在孔壁内造孔”的方法获得.我们的策略是采用温和的造孔条件,如稀NaOH溶液,合适的温度与固/液比等.采用X射线衍射(XRD),透射电镜(TEM)和低温N2吸附等技术对样品的介孔结构进行了系统表征.结果表明,墙内孔的密度非常高,孔径均一(平均尺寸3.6 nm),且在三维网络高度连通原孔道,但介孔结构仍保持其完整性.锐钛矿纳米晶粒的结晶度和大小在墙内造孔前后基本保持不变.该材料光催化降解罗丹明B(0.303 min–1)与亚甲基蓝(0.757 min–1)的活性相当高,此活性分别是其母体材料的5.1和5.3倍,甚至是Degussa P25光催化剂的16.5和24.1倍.这充分表明三维连通孔道结构对活性的大幅提高起了关键作用.孔道三维连通式锐钛矿TiO2-SiO2纳米复合介孔材料对上述污染物展现出意想不到的高降解活性,显著高于迄今已报道的金属氧化物基介孔材料对上述污染物的降解活性.更重要的是,该光催化剂具有相当高的稳定性和重复使用性.相信,本方法将为具有超高性能的孔道三维相互连通其它金属氧化物基介孔材料的制备铺平了道路.
　　小角XRD结果表明,母体材料的孔道是两维六方有序结构,在孔壁内造孔之后,样品原有的介孔结构仍保持其规整性.宽角XRD结果显示,二氧化钛的晶相是锐钛矿,晶粒尺寸为10.8 nm.造新孔之后,锐钛矿纳米晶粒的结晶度和大小与母体样品的相比变化不大. TEM结果显示,母体样品的孔壁内没有孔.孔道是两维六方有序排列的直孔道,孔径大小均一(平均尺寸4.1 nm).高分辨透射电镜(TEM)观察揭示,锐钛矿纳米晶粒(平均大小11.3 nm)在孔壁内随机排列,并与无定形SiO2纳米颗粒相互连接,相间共存,形成类似“砖块?水泥砂浆”砌成的孔壁,这种独特的复合骨架结构赋予其很高的稳定性.当一些SiO2纳米颗粒被去除之后, TEM观察显示,孔壁内有密集分布的孔,这些孔取向随机,并在三维方向连通原孔道,但介孔骨架结构仍保持其完整性.墙内孔的大小范围很窄(3.1?4.3 nm),平均大小为3.6 nm.高分辨TEM观察显示,锐钛矿晶粒大小与母体材料内的相比基本未变.上述结果与XRD结果一致.低温N2吸附表征结果显示,母体样品内只有一种孔道,孔径为4.0 nm.去除部分SiO2后的样品内有两种孔道,孔径分别是3.4和4.1 nm.这些结果与TEM的观察吻合.罗丹明B与亚甲基蓝在造孔前后样品内扩散速率评价结果显示,其在三维连通孔道内的扩散速率很高,大约是其母体材料内的5倍以上.这表明相互连通的孔道网络结构非常有利于客体分子在其内扩散.光催化降解性能评价结果显示,罗丹明B与亚甲基蓝在相互连通孔道内降解的速率相当高,分别是其在不连通孔道内的5.1和5.3倍.这充分证明孔道三维相互连通对活性的大幅提高起了关键作用.我们对材料的稳定性和重复使用性作了评价,经过10次循环使用孔道三维相互连通锐钛矿TiO2-SiO2纳米复合介孔材料,其吸附与光催化降解罗丹明B的性能变化不大.这充分证明本文制备的孔道连通复合介孔材料的性能是相当稳定的和可重复使用的.该方法可用于制备具有超高性能的孔道三维相互连通其它金属氧化物基介孔材料,如Nb2O5, Ta2O5等.     

Étude physicochimique de nouveaux composés formés par incorporation directe d’hétéropolyacide dans une silice mésoporeuse organisée

Heteropolyacids (HPW) are known as active catalysts for various redox reactions. The direct incorporation of HPW species in a mesoporous organised silica molecular sieve during the synthesis was studied. The association of two type of surfactants is essential for the preparation of such solids. The silica-organised materials comprising heteropoly compounds thus obtained were thermally stable porous materials with mesopores and large surface areas.     

Photocatalytic Degradation of Imidacloprid by Phosphotungstic Acid Supported on a Mesoporous Sieve MCM‐41

Solid catalysts consisting of polyoxometalates (POM) namely phosphotungstic acid H₃PW₁₂O₄₀ (HPW) supported on a mesoporous sieve MCM‐41 have been prepared and characterized by FT‐IR, X‐ray diffraction, nitrogen adsorption and high resolution transmission electron microscope (HRTEM). The HPW/MCM‐41 with different HPW loadings from 10 to 60 wt% possess large specific surface area and rather uniform mesopores. Keggin structure of HPW retains on the prepared composite catalysts. The photocatalytic performance of HPW/MCM‐41 was examined by degradation of a durable pesticide imidacloprid. It is found that the prepared photocatalysts exhibit high activity under irradiation of 365 nm monochromatic light. For 50 mL of imidacloprid (10 mg/L), conversion of imidacloprid using 20 mg of HPW/MCM‐41 with 50 wt% loading level and calcined at 300°C reaches 58.0% after 5 h irradiation.     

双酸体系下有序介孔SO42-/ZrO2-SiO2材料的合成

采用一锅合成法通过调变自组装过程中硫酸和盐酸的体积比,成功制备了系列介孔SO₄^2-/ZrO₂-SiO₂固体酸材料(Zr/Si物质的量为1.1).XRD、UV-Vis DRS、HR-TEM等表征结果表明,所得材料均具有高度有序的二维介孔结构及四方相氧化锆的晶体结构.氮吸附和FT-IR表征结果进一步发现,通过改变硫酸/盐酸体积比可有效调变材料比表面积、孔容、孔径及表面L酸与B酸的相对强度.与纯硅介孔分子筛SBA-15不同,此系列SO₄^2-/ZrO₂-SiO₂固体酸材料均在正戊烷的异构化反应中表现出较高的催化活性和稳定性.其原因在于,在合成过程中硫酸的加入不仅促使了酸基的形成,而且稳定了催化剂的晶体结构;盐酸的存在则保持了有序的介孔结构.由此可见,混酸合成体系有望制备出结构有序、酸性可调、催化性能优越的新型催化材料,并在众多酸催化反应中取得应用.     

In situ synthesis, characterization, and catalytic performance of tungstophosphoric acid encapsulated into the framework of mesoporous silica pillared clay

Mesoporous silica pillared clay (SPC) incorporated with tungstophosphoric acid (HPW) has been synthesized via in situ introducing P and W source in the acidic suspension of the clay interlayer template during the formation of the silica pillared clay. The samples were characterized by XRD, XRF, FT-IR, TG-DTA, N(2) adsorption-desorption, and SEM techniques. The results showed that the HPW formed by in situ method has been effectively introduced into the framework of mesoporous silica pillared clay and its Keggin structure remained perfectly after formation of the materials. In addition, samples with similar HPW loadings were also prepared by impregnation method using SPC as the support. HPW in the incorporated samples was better dispersed into the silica pillared clay than in the impregnated samples. The results of catalytic tests indicated that the encapsulated materials demonstrated better catalytic performance than the impregnated samples in oxidative desulfurization (ODS) of dibenzothiophene (DBT).     

Synergistic effect of Zr-incorporated framework and subsequent deposition of PEHA towards efficient and reusable HPW/PEHA/ZrSBA-15 composites

Heteropolyacid-based catalysts with molecular level distributions of surface functionalities were synthesized by anchoring phosphotungstic acid (HPW) onto the pentaethylenehexamine (PEHA) layers stabilized by platelet ZrSBA-15 with short mesochannels. Namely, the presence of zirconium species in pore walls could significantly improve the surface acidity to attract and stabilize PEHA species, leading to a stronger interaction between them and a superiority to make HPW species highly stable. Standard characterizations of XRD, SEM, TEM, FT-IR, TG, N₂ adsorption–desorption and N elemental analyses were preserved to demonstrate the synergistic effect. The resulting composite were investigated for the oxidation of benzaldehyde to benzoic acid in the H₂O₂-mediated environment, the catalyst 25 % HPW/PEHA/ZrSBA-15 screened high yield for benzoic acid (~99.7 %). Besides, various reaction parameters such as reaction temperature, reaction time, the amount of hydrogen peroxide and catalyst reusability were also investigated for the oxidation of benzaldehyde to benzoic acid with a target to confirm the validity of the catalyst.     

Enhanced oxygen reduction at Pd catalytic nanoparticles dispersed onto heteropolytungstate-assembled poly(diallyldimethylammonium)-functionalized carbon nanotubes

Both Keggin-type phosphotungstic acid (HPW) and Pd are not prominent catalysts towards the oxygen reduction (ORR), but their composite Pd-HPW catalyst produces a significantly higher electrochemical activity for the ORR in acidic media. The novel composite catalyst was synthesized by self-assembly of HPW on multi-walled carbon nanotubes (MWCNTs) via the electrostatic attraction between negatively charged HPW and positively charged poly(diallyldimethylammonium (PDDA)-wrapped MWCNTs, followed by dispersion of Pd nanoparticles onto the HPW-PDDA-MWCNT assembly. The as-prepared catalyst was characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). TEM images show that Pd nanoparticles were uniformly dispersed on the surface of MWCNTs even when the Pd loading was increased to 60 wt%. Electrochemical activity of the catalysts for the ORR was evaluated by steady state polarization measurements using a rotating disk electrode. Compared with the acid treated MWCNTs, Pd nanoparticles supported on the HPW-assembled MWCNTs show a much higher ORR activity that is comparable to conventional Pt/C catalysts. The high electrocatalytic activities could be related to high dispersion of Pd nanoparticles as well as synergistic effects originating from the high proton conductivity of HPW. The Pd/HPW-PDDA-MWCNTs system as the cathode catalyst in proton exchange membrane fuel cells is demonstrated.     

Mesoporous zirconium–silica nanocomposite modified with heteropoly tungstophosphoric acid catalyst for ultra-deep oxidative desulfurization

An adsorbent catalyst was proposed to reduce the leaching of active species of the catalyst and enhance the kinetics of the oxidative desulfurization (ODS) reaction of dibenzothiophene (DBT) from model diesel fuel. By loading phosphotungstic acid (HPW) species onto a zirconium-modified hexagonal mesoporous silica (Zr-HMS), a novel catalyst was synthesized and utilized for the ODS process. An ultrafast ODS kinetics was specifically identified using 20%HPW/Zr-HMS as catalyst. Within 30 min, more than 95% of the 350 ppm DBT content of the model fuel was oxidized by H₂O₂. The synthesized catalyst retained its sulfur removal ability even after five subsequent ODS reactions and the leaching of HPW species was found to be suppressed successfully. Overall, this new reusable catalyst provided an alternative for highly efficient ultra-deep desulfurization process.     

A highly efficient heterogeneous catalytic system for Heck reactions with a palladium colloid layer reduced in situ in the channel of mesoporous silica materials

A new catalyst, Pd-SBA, was prepared by the introduction of an Si-H function into the channel of SBA-15 mesoporous materials resulting in a highly dispersed metal colloid layer on the pore walls of the support material, creating one of the most active heterogeneous catalysts for Heck coupling reactions.     

Controlled polymerization in mesoporous silica toward the design of organic-inorganic composite nanoporous materials

Free-radical polymerization inside mesoporous silica has been investigated in order to open a route to functional polymer-silica composite materials with well-defined mesoporosity. Various vinyl monomers, such as styrene, chloromethyl styrene, 2-hydroxyethyl methacrylate, and methacrylic acid, were polymerized after impregnation into mesoporous silicas with various structures, which were synthesized using polyalkylene oxide-type block copolymers. The location of the polymers was systematically controlled with detailed structures of the silica framework and the polymerization conditions. Particularly noteworthy is the polymer-silica composite structure obtained by in situ polymerization after the selective adsorption of monomers as a uniform film on silica walls. The analysis of XRD data and the N(2) adsorption isotherms indicates the formation of uniform polymer nanocoating. The resultant polymer-silica composite materials can easily be post-functionalized to incorporate diverse functional groups in high density, due to the open porous structure allowing facile access for the chemical reagent. The fundamental characteristics of the composite materials are substantiated by testing the biomolecule's adsorption capacity and catalytic reactivity. Depending on the structure and composition of polymers, the resultant polymer-silica composite materials exhibit notably distinct adsorption properties toward biomolecules, such as proteins. Furthermore, it is demonstrated that the nanocoatings of polymers deposited on the mesopore walls have remarkably enhanced catalytic activity and selectivity, as compared to that of bulk polymer resins. We believe that, due to facile functionalization and attractive textural properties, the mesoporous polymer-silica composite materials are very useful for applications, such as adsorption, separation, host-guest complexes, and catalysis.