Determination of99Tc in coastal seawater collected in Fukuoka,Japan

Concentrations of⁹⁹Tc were determined by inductively coupled plasma mass spectrometry (ICP-MS) on coastal seawater in the general environment in Japan. Technetium was enriched on iron hydroxide by repetitive co-precipitation method from a large volume of seawater and separated from impurities by solvent extraction and ion-exchange techniques. The concentrations of⁹⁹Tc were 1.0 to 7.4 Bq1^–1, which was one order of magnitude lower than the level reported on seawater from general environment by beta-ray counting. Concentrations of¹³⁷Cs determined on the same seawater were 3.7 and 3.9 mBq1^–1. The activity ratio of⁹⁹Tc/¹³⁷Cs was calculated to be 2.7×10^–4. This ratio was very close to the value expected for fallout from nuclear tests.     

Simultaneous flow injection speciation of iron(II) and iron(III) cyano complexes utilizing electrochemical and atomic absorption detectors in series

Summary A method is described for the simultaneous speciation of Fe(CN) ₆ ^4– and Fe(CN) ₆ ^3– in a flow injection (FIA) system comprising electrochemical (EC) and flame atomic absorption spectrometry (AAS) detectors in series. One of these species is detected amperometrically at a Pt-electrode by applying the required potential and measuring the resulting reduction or oxidation current of the appropriate iron cyanide complex. Total iron in both species is determined by an AAS detector. The EC detector is inherently more sensitive, with a detection limit of 0.5 g Fe l^–1 and a relative standard deviation of 1.0% for a 0.040 g Fe ml^–1 sample. The limit of detection for the AAS detector is 0.5 g Fe ml^–1, and the relative standard deviation for a 5.70 g Fe ml^–1 sample is 0.40%. The method enables up to 60 analyses (120 speciations) per hour and obviates the problem of easy oxidation of Fe(CN) ₆ ^4– .

---

Simultane Speziation von Eisen(II)- und Eisen(III)-Cyanokomplexen durch Flie\injektionsanalyse mit Hilfe von hintereinander geschalteten elektrochemischen und AAS-Detektoren

     

Spectrophotometric determination of mercury with 5,10,15,20-tetrakis(3-chloro-4-sulfophenyl)porphine by flow injection analysis

5,10,15,20-tetrakis(3-chloro-4-sulfophenyl)porphine (m-Cl-TPPS₄) was synthesized and used for the Spectrophotometric determination of mercury by flow injection analysis. A pseudo-first-order reaction kinetic mechanism was proposed with a rate constant of 0.8 min^–1 for Hg(II) withm-Cl-TPPS₄ in the presence of 8-hydroxyquinoline in a medium of 1.0M acetic acid and sodium acetate buffer solution (pH 6.22). In the optimum conditions of reaction temperature (85 ° C), stopped-flow time (60 s) and sampling volume (100 l), the method's relative standard deviation was 0.82% (n = 12) at 5.0 g ml^–1 mercury, with a linear range of 0–12.0 g ml^–1 and an analytical frequency of 60h^–1. The detection limit (3) was 0.025 g ml^–1. Interference studies showed that most metal ions co-existing with Hg²⁺ could be tolerated at 100-fold excess levels, but Zn²⁺, Cu²⁺ and Mn²⁺ needed to be masked. The method has been applied to the analysis of water samples with satisfactory results.     

Rapid and sensitive determination of pertechnetate in99Mo/99mTc generator eluates by reversed-phase high-performance liquid chromatography

Reversed-phase high-performance liquid chromatography with u.v. detection was applied for rapid and sensitive determination of pertechnetate in⁹⁹Mo/^99mTc generator eluates, using a mixture solvent of acetonitrile and 0.04M aqueous acetate buffer (1/1) containing a few volume percentage of 0.5 M tetra-n-butylammonium hydroxide as the mobile phase. Employing a -bondapak C₁₃ column, the TcO ₄ ^– species was separated, monitored with absorbance at 254 nm, and observed at the retention time of 3.5 min. The detection limit was found to be 5.2·10^–10 g of Tc for each injection. Total Tc contents in the^99mTc eluates from clinically-used⁹⁹Mo/^99mTc generator were analyzed by this technique. The^99mTc (⁹⁹Tc) species was separated from the contaminant⁹⁹Mo. This method was found to be useful for the purification of^99mTc (⁹⁹Tc) as well as the determination of total Tc content.     

Simultaneous determination of chromium(VI) and chromium(III) by flame atomic absorption spectrometry with a chelating ion-exchange flow injection system

Summary Simultaneous Determination of Chromium(VI) and Chromium(III) by Flame Atomic Absorption Spectrometry with a Chelating Ion-Exchange Flow Injection System A simple method is described for the simultaneous determination of chromium(VI) and chromium(III) in a flow injection system comprising chelating ion-exchange and flame atomic absorption spectrometry. Sampling rates for 2001 and 1 ml sample volumes were 120 and 60 h^–1 (240 and 120 speciations per hour), respectively. Typical relative standard deviations were 0.52% for Cr(VI) (0.50g ml^–1 and 0.67% for Cr(III) (0.10,g ml^–1) and the corresponding limits of detection were 85 ng ml^–1, and 16 ng ml^–1, respectively.On leave from University of Belgrade.     

Application of isotope-dilution laser ablation ICP–MS for direct determination of Pu concentrations in soils at pg g<Superscript>−1</Superscript> levels

The methods available for determination of environmental contamination by plutonium at ultra-trace levels require labor-consuming sample preparation including matrix removal and plutonium extraction in both nuclear spectroscopy and mass spectrometry. In this work, laser-ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) was applied for direct analysis of Pu in soil and sediment samples. Application of a LINA-Spark-Atomizer system (a modified laser ablation system providing high ablation rates) coupled with a sector-field ICP–MS resulted in detection limits as low as 3×10^–13 g g^–1 for Pu isotopes in soil samples containing uranium at a concentration of a few g g^–1. The isotope dilution (ID) technique was used for quantification, which compensated for matrix effects in LA–ICP–MS. Interferences by UH⁺ and PbO₂⁺ ions and by the peak tail of ²³⁸U⁺ ions were reduced or separated by use of dry plasma conditions and a mass resolution of 4000, respectively. No other effects affecting measurement accuracy, except sample inhomogeneity, were revealed. Comparison of results obtained for three contaminated soil samples by use of -spectrometry, ICP–MS with sample decomposition, and LA–ICP–IDMS showed, in general, satisfactory agreement of the different methods. The specific activity of ^239+240Pu (9.8±3.0 mBq g^–1) calculated from LA–ICP–IDMS analysis of SRM NIST 4357 coincided well with the certified value of 10.4±0.2 mBq g^–1. However, the precision of LA–ICP–MS for determination of plutonium in inhomogeneous samples, i.e. if "hot" particles are present, is limited. As far as we are aware this paper reports the lowest detection limits and element concentrations yet measured in direct LA–ICP–MS analysis of environmental samples.Sergei F. Boulyga is on leave from The Radiation Physics and Chemistry Problems Institute, 220109 Sosny, Minsk, Belarus.     

Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

Spectrofluorimetric flow-injection determination of cerium in carbon and low alloy steels

Cerium can be determined spectrofluorimetrically (_em 350 nm, _ex 260 nm) based on the relatively intense native fluorescence of the cerium(III) aquo-ion. The main potential interference in the analysis of steel from iron(III), cerium(IV) and chromium(VI) are removed by use of a carrier solution containing 2.5% w/v hydroxylammonium chloride. The slight residual interference from iron(II) can be corrected by a matrix matching factor linearly related to the amount of iron present. The calibration graphs are linear over the range 0–7 g ml^–1 based on 250 l injection volumes. The sampling rate was 30 h^–1. The relative standard deviation was 2.0% (n=5) at 3 g ml^–1 cerium. The system has been applied to the determination of cerium in carbon or low alloy steels.     

Determination of technetium in99Mo/99m Tc-generators

The Tc budget in several ROTOP-generators was determined by neutron activation analysis (NAA) and UV-spectroscopy. The complete procedure included the preparation of the generator, elution cycle in 24 to 72 h intervals and evaporation of the eluates to dryness. The samples were aliquoted, irradiated in the reactor and analyzed via⁹⁹Tc(n, n')^99mTc⁹⁹Tc reaction as well as by UV-absorption due to pertechnetate. The most reliable method proved to be NAA including chemical separation from²⁴Na by ion exchange after the complete decay of³⁸Cl. The detection limit was 50 ppb (3 ng Tc), compared with the total amount of several 10^–5 g down to 10^–7 g Tc in the system and its fractions. The mass balance and the elution profiles obtained correspond very well to the theoretical values. The results permit further quantitative considerations on both elution kinetics and the generator system.     

Spectrofluorimetric determination of aluminium in silicon and in electronic grade reagents

Summary A sensitive spectrofluorimetric method is based on the complexation of Al with the dye Mordant Black 17 or Calcon (CI 15705). The complex solution in n-propyl alcohol (1.5×10^–4 mol/l) is mixed (5:20) with 1 mol/l acetic acid — sodium acetate buffer (pH 4.8) and maintained at 40°C for 60 min. The fluorescence intensity is measured at Ex=565 nm, Em=610 nm: The calibration curve for Al was found to be linear in the range 0 to 60 ng×ml^–1 with a standard deviation of =1.5 and an Al detection limit of 3 ng×ml^–1. The interferences due to more than 40 ions were investigated; the presence of Fe³⁺, Cr³⁺, Co²⁺, Cu²⁺, Ti⁴⁺, VO²⁺, ZrO²⁺, WO ₄ ^2– , MoO ₄ ^2– , CrO ₄ ^2– and particularly F^–, must be avoided or masked during the determination of Al. The sample of silicon/silicon dioxide was treated with a mixture of conc. HF and HNO₃ (2:1), followed by digestion and distillation at 90°C to eliminate the matrix as fluorosilicic acid. A small residue of AlF₃ was decomposed with HClO₄. In SiO₂ anodized layers (25–250 g) the minimum detection of Al was estimated to be 10¹⁸ At×cm^–3, in monocrystalline silicon (25–250 mg) 10¹⁶ At×cm^–3. The method can also be employed to determine the presence of Al in the residues by distillation of a small quantity (5–10g) of many solvents or reagent solutions. Presented at: IX. Congresso Nazionale — Div Chim Anal (S.C.I.) Ferrara 1990     

Spectrophotometric determination of vanadium(IV) in the presence of vanadium(V) using Br-PADAP

In the present paper, a simple and sensitive method is proposed for vanadium(IV) determination in the presence of vanadium(V). This is based on the oxidation of vanadium(IV) present in the sample to vanadium(V) by addition of iron(III) cation, followed by a complexation reaction of iron(II) with the spectrophotometric reagent 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP). The iron(II) reacts with Br-PADAP immediately, forming a stable complex with a large molar absorptivity. The vanadium(IV) determination is possible, with a calibration sensitivity of 0.549 g ml^–1, for an analytical curve of 18.8 ng ml^–1 to 2.40 g ml^–1, molar absorptivity of 2.80 × 10⁴ 1 mole^–1 cm^–1 and a detection limit of 5.5 ng ml^–1. Selectivity was increased with the use of EDTA as a masking agent. The proposed method was applied for the vanadium(IV) determination in the presence of several amounts of vanadium(V). The results revealed that 200 g of vanadium(V) do not interfere with determination of 5.00 g of vanadium(IV). The precision and the accuracy obtained were satisfactory (R. S. D.<2%).     

Determination of medecamycin by adsorptive stripping voltammetry with an activated electrode

The adsorptive and electrochemical behaviors of medecamycin were investigated on a glassy carbon electrode (GCE) pretreated by anodic oxidation at +1.8 V for 5 min in 0.025 mol l^–1 NH₃-NH₄Cl (pH 8.6) solution. An adsorptive stripping voltammetric method for the determination of medecamycin at the pretreated glassy carbon electrode has been developed. Medecamycin was accumulated in NH₃-NH₄Cl buffer (pH 9.0) at a potential of –0.7 V (vs. saturated calomel electrode (SCE)) for a certain time, and then determined by second-order differential anodic stripping voltammetry. The second-order differential anodic stripping peak current at +0.72 V was proportional to the concentration of medecamycin in the range 2.0 g ml^–1 to 50.0 g ml^–1. The detection limit (three times the signal-to-noise) was 1.0 g ml^–1 and the relative standard deviation of the results was 3.28% for eight successive determinations of 10.0 g ml^–1 medecamycin. This method has been applied to the direct determination of medecamycin in commercial tablets and spiked urine samples with satisfactory results.     

Determination of nitrate and nitrite by continuous liquid-liquid extraction with a flow-injection atomic-absorption detection system

Summary A flow injection system coupled on-line with a continuous liquid-liquid extractor is used for the indirect determination of nitrate and nitrite with an atomic-absorption detection system. These anions form ion-pairs with the copper(I)-neocuproine chelate which are extracted into methyl-isobutyl-ketone, the atomic-absorption signal of copper from the organic phase being proportional to the nitrate or nitrite concentration. The methods proposed herein are suitable for determining nitrate or nitrite at the g ml^–1 level with a sampling frequency of 35 ± 5 h^–1. The methods compare favourably with their batch counterparts with regard to sensitivity, selectivity, sample volume and sampling frequency.

---

Bestimmung von nitrat und nitrit durch kontinuierliche flüssig-flüssig-extraction mit detektion durch ein fließinjektions-AAS-system

Zusammenfassung Ein Fließinjektionssytem, das on-line mit einem Flüssig-Flüssig-Extraktor gekoppelt ist, wird zur indirekten AAS-Bestimmung von Nitrat und Nitrit benutzt. Diese Anionen bilden mit Kupfer(I)-neocuproinchelat Ionenpaare, die mit Methylisobutylketon extrahiert werden. Das AAS-Signal des Kupfers aus der organischen Phase ist der Nitrat- bzw. Nitritkonzentration proportinal. Die vorgeschlagenen Verfahren eignen sich zur Nitrat- oder Nitritbestimmung im g/ml-Bereich mit einer Probenfrequenz von 35 ± 5 je Stunde. Diese Methoden sind den Batch-Verfahren in bezug auf Empfindlichkeit, Selektivität sowie Probevolumen und -frequenz überlegen.

     

Technetium-99 in the Rhône river water

⁹⁹Tc a pure -particle emitter with long half-life (T=2.13×10⁵ y) was measured in Rhône river water and in Mediterranean sea water near the river mouth. The values obtained in the Rhône river allowed us to show the downstream distribution of the effluents from the nuclear fuel reprocessing plant of Marcoule: the⁹⁹Tc activity which is low above the plant, 0.016 mBq 1^–1, is 0.4 mBq 1^–1 at Roquemaure, located 14 km below the plant, and then decreases as a function of distance from the plant.     

Technetium-99m generator based on 12-molybdocerate —99Mo precipitate as column matrix

The preparation of insoluble 12-molybdocerate(IV) from⁹⁹Mo of low specific activity, produced by thermal neutron irradiation of MoO₃, is described. Samples of the material are dried at 50, 100 and 200°C and used as column matrices from which the generated^99mTc activity is periodically eluted with saline solution or saline solution containing 5·10^–5M K₂CrO₄ as an oxidant. The elution yields of^99mTc are high and reproducible (95–81%) with radionuclidic purity 99.98%. Both chemical and radiochemical purity (as TcO ₄ ^– ) of the eluates decrease with increasing drying temperature of the column matrix. Using chromated saline solution as eluent improves the radiochemical purity of the^99mTc eluate.     

Flow-injection extraction-spectrophotometric determination of permanganate with the triphenylsulphonium cation

Summary Permanganate can be determined spectrophotometrically at 548 nm after flow-injection extraction into chloroform of the ion-associate triphenylsulphonium permanganate. The carrier stream was a pH 6 buffer containing 10% (w/v) ammonium fluoride and the reagent stream was 0.10% (w/v) triphenylsulphonium chloride. The injection rate was 20 h^–1. The calibration graph is linear up to 40 g ml^–1 and the detection limit is 1.10 g ml^–1 Mn(VII), based on injection volumes of 250 l. The system has been applied to the determination of manganese in steels and a cupro-nickel alloy.     

Radiochenical determination of technetium-99 in LLW by chelation with sodium diethyl dithiocarbamate (NaDDC) and extraction with chloroform

A radiochemical method has been developed for the determination of⁹⁹Tc in low-level radioactive, waste from nuclear facilities, using^99mTc as an internal tracer. Radioactive contaminants were removed by carrier hydroxide precipitation and chelating extraction with NaDDC/CHCl₃ system at pH 4. The final technetium was chelated with NaDDC in 3N HCl solution and extracted selectively into chloroform. The average of radiochemical recovery for various types of LLW sample is about 90%. The decontamination factors for most radioactive nuclides are higher than 10⁵. The detection limit for⁹⁹Tc in a sample of about 10 g is 0.17 pCi/g (6.5 Bq·kg^–1) for a 100-minute count.     

Flow-injection determination of HMF in honey by the Winkler method

Summary A new method for the semiautomatic determination of 5-hydroxymethylfurfural (HMF) by photometric flow injection analysis on the basis of the Winkler's reaction is proposed. The derivative FIA-gram signals were also obtained and detection limit was decreased. The linear range of determination is 2.3–98 g·ml^–1. The presence of sugars is well tolerated. The proposed method can be employed to determine HMF in honey samples with a sampling frequency of 35 h^–1.     

Automated analysis of terbutaline (BricanylR) in human plasma with liquid chromatography and electrochemical detection using column-switching (multidimensional chromatography)

Summary An automated method based on liquid chromatography has been developed for the determination of terbutaline in human plasma in the range of 5–50 pmole·ml^–1. The necessary sensitivity and selectivity was obtained by using electrochemical detection and a microprocessor-controlled column switching system. A combination of three columns was used: a C₈ type for pre-separation, a C₁₈ type for trapping and, for final separation, a strongly acidic ion exchanger. The accuracy of the method was examined by comparison with a method based on gas chromatography — mass spectrometry. The overall precision was ±3.5% and ±2.2% respectively at 5 and 50 pmole·ml^–1. The total absolute recovery for terbutaline and internal standard at the above concentration levels were in the range 85–106%.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Methods and results of99Tc analysis of Nevada test site groundwaters

Samples of the long-lived fission product⁹⁹Tc were isolated from liter quantities of selected groundwaters from the Cheshire, Bilby, Nash, Bourbon, Cambric and Faultless event sites and the⁹⁹Tc concentrations determined by liquid scintillation counting. Although⁹⁹Tc was detected in several of the samples, the concentrations did not exceed the MPC_w of 3·10^–4 Ci/ml and the results indicated that the Tc was present primarily in solution rather than sorbed on colloidal-size material.