Spectrofluorimetric determination of nucleic acids as 8-hydroxyquinoline/ yttrium ternary complexes

The formation of nucleic acids/8-hydroxyquinoline/yttrium(III) ternary complexes and their fluorescent properties have been studied. The nucleic acids studied include native and thermally denatured calf thymus DNA, fish sperm DNA and yeast RNA. In the range of pH 7.6–8.5, controlled by NH₃-NH₄C1 buffer, ternary complexes are formed that fluoresce at different wavelengths with different nucleic acids. Based on the fluorescence reactions, sensitive spectrofluorimetric methods for nucleic acids are proposed. In optimal conditions, the calibration curves were linear in the range 0.5–4.0 gml^–1 for calf thymus DNA, 0.5–2.5 g ml^–1 for fish sperm DNA and 0.5–4.0 g ml^–1 for yeast RNA. The limits of determination (3 ) were 0.030 g ml^–1 for calf thymus DNA, 0.020 g ml^–1 for fish sperm DNA and 0.090 g ml^–1 for yeast RNA. Corresponding to the interferences of coexisting substances, six synthetic samples were constructed and the results of determination were satisfactory.     

Characterization of airborne particulates by laser microprobe mass analysis

Summary Laser microprobe mass analysis (LAMMA) was applied to characterize aerosol particles collected and separated from 16m to 0.06m by a low pressure cascade impactor. Positive ion LAMMA spectra showed characteristic molecular peaks such as PbCl⁺, a series of Si₂O⁺–Si₂O₄ ⁺ and NaAl₂Si₂O₂ ⁺–NaAl₂Si₂O₅ ⁺, and TiO⁺ in 0.06–0.12m, 0.5–1m and 4–8m fraction, respectively. In the negative ion LAMMA spectra, it was observed that the fragment peaks of sulfate ions were deficient above 2m and those of nitrate ions were deficient under 2m. LAMMA allows remarkable insights into the chemical nature of aerosol particles.

---

Charakterisierung luftgetragener Teilchen durch Laser-Microprobe-Massenspektrometrie

Zusammenfassung Laser-Microprobe-Spektrometrie (LAMMS) wurde zur Analyse atmosphärischen Aerosols herangezogen, welches im Korngrößenbereich zwischen 16m und 0.06m mit einem Niederdruckkaskadenimpaktor fraktioniert gesammelt wurde. Positive LAMMS-Spektren zeigten charakteristische molekulare Peaks, wie etwa PbCl⁺, eine Serie von Si₂O⁺–Si₂O₄ ⁺ und NaAl₂Si₂O₂ ⁺–NaAl₂Si₂O₅ ⁺, sowie TiO⁺ in der 0,06–0,12-m,- 0,5–1–m- bzw. 4–8-m-Fraktion. In den negativen LAMMS-Spektren konnten über 2m keine Fragmentpeaks für Sulfationen, unter 2m. keine für Nitrationen beobachtet werden. LAMMS ermöglicht eine bemerkenswerte Einsicht in die chemische Natur von Aerosolteilchen.

     

Spectrophotometric determination of mercury with 5,10,15,20-tetrakis(3-chloro-4-sulfophenyl)porphine by flow injection analysis

5,10,15,20-tetrakis(3-chloro-4-sulfophenyl)porphine (m-Cl-TPPS₄) was synthesized and used for the Spectrophotometric determination of mercury by flow injection analysis. A pseudo-first-order reaction kinetic mechanism was proposed with a rate constant of 0.8 min^–1 for Hg(II) withm-Cl-TPPS₄ in the presence of 8-hydroxyquinoline in a medium of 1.0M acetic acid and sodium acetate buffer solution (pH 6.22). In the optimum conditions of reaction temperature (85 ° C), stopped-flow time (60 s) and sampling volume (100 l), the method's relative standard deviation was 0.82% (n = 12) at 5.0 g ml^–1 mercury, with a linear range of 0–12.0 g ml^–1 and an analytical frequency of 60h^–1. The detection limit (3) was 0.025 g ml^–1. Interference studies showed that most metal ions co-existing with Hg²⁺ could be tolerated at 100-fold excess levels, but Zn²⁺, Cu²⁺ and Mn²⁺ needed to be masked. The method has been applied to the analysis of water samples with satisfactory results.     

Differential pulse voltammetric methods for the simultaneous estimation of uranium-iron and uranium-cadmium mixtures in solution

Differential pulse voltammetric methods have been developed for the simultaneous estimation of the constituents of uranium-iron and uranium-cadmium mixtures in solution. A mixture of 1M H₃PO₄–1M KH₂PO₄ (with a pH1.5), was found to be the most ideal supporting electrolyte for both methods, among many that were evaluated for their suitability. In uranium-iron mixtures the calibration for iron was found to be linear up to 150 g ml^–1 (r²=0.9986), while that of uranium up to 500 g ml^–1 (r²=0.999). Iron at 6.7 g ml^–1 level could be determined in the presence of 800 fold uranium (wt/wt) without significant interference. Uranium at 21 g ml^–1 level could be analyzed with 5-fold iron (wt/wt). This upper limit of iron was due to the precipitation of iron as phosphate. In the case of uranium — cadmium mixtures, cadmium calibration for cadmium was found to be linear up to 1300 g ml^–1 (r²=0.9993). Concentration levels of 4.6 g ml^–1 Cd could be determined at a 500-fold excess (wt/wt) of uranium. Uranium calibration was linear up to 500 g ml^–1 (r²=0.999) and 21 g ml^–1 uranium could tolerate up to a 1000-fold excess of cadmium (wt/wt). Both procedures could tolerate 10 g ml^–1 levels of metal ions, such as chromium, copper, manganese, molybdenum and vanadium.     

Spectrophotometric and derivative spectrophotometric determination of palladium(II) using pyridopyridazine dithione in the presence of non-ionic surfactant

Pyridopyridazine dithione (PPD) was synthesized as a new sensitive and selective reagent for spectrophotometric and derivative spectrophotometric determination of palladium(II). In aqueous and micellar medium, PPD forms 1:4 complexes having molar absorptivities of 4.68 × 10⁴ and 5.74 × 10⁴lmol^–1 cm^–1 at 570 and 615 nm, respectively. Beer's law was obeyed up to 2.2 and 2.5 g ml^–1 with detection limits of 0.2 and 0.1g ml^–1. The relative standard deviations for 1.23g ml^–1 were 2.6 and 1.3%, in the absence and presence of Triton X-100. In fourth-derivative mode, the regression equation, linear range, detection limit and RSD for 0.075 g ml^–1 wereD ₄ = 4.3C + 1.5 × 10^–3, 0.013 – 0.23 g ml^–1, 3.7 ng ml–1 and 0.78%, respectively. The ionization constants of the reagent and stability constants of the complexes were evaluated. The method is free from interference by most common metal ions and anions. The method was applied for determination of palladium in activated charcoal.     

Simultaneous determination of aluminium and iron in glasses,phosphate rocks and cement using first- and second-derivative spectrophotometry

First- and second-derivative spectrophoto-metric methods for the simultaneous determination of aluminium and iron in their mixtures are described. The methods are based on the colored complexes formed by aluminium and iron with hematoxylin in the presence of cetyltrimethylammonium bromide as a surfactant. The zero-crossing method has been utilized to measure the first- and second-derivative value of the derivative spectrum. Aluminium (0.05–1 gml^-1) could be determined in the presence of iron (0.09–1.6 gml^-1) and vice versa. The detection limits of aluminium and iron are 0.01 and 0.09 gml^-1, respectively in the first-derivative mode and 0.014 and 0.1 gml^-1 in the second-derivative mode. The proposed method has been applied to the simultaneous determination of aluminium and iron in glasses, phosphate rocks, cement and magnesite alloy.     

Rapid Determination of Mercury in Water by Stripping Voltammetry at a Gold-Modified Carbon Electrode

A procedure was developed for determining mercury in natural water by stripping voltammetry on a gold-modified carbon electrode. The concentration dependence of the anodic stripping current of mercury is linear in the range 0.02–5 g/L Hg(II). The interference of Fe(III), Cu(II), Cl^–, Br^–, I^–, and F^– ions with the determination of mercury was studied. Ozonation was used for rapid sample preparation. The detection limit for mercury was 0.02 g/L at an electrolysis time of 5 min.     

Estimation of inorganic phosphate in aqueous solutions of DNA: A modification of the Berenblum-Chain method

Some modifications of the stannous chloride reduction method for the estimation of inorganic phosphate reported by Berenblum-Chain are suggested. By this method, it is possible to measure 25 g l^–1 of phosphorus /P/ as inorganic phosphate in the presence of macromolecules like deoxyribonucleic acid /100 g ml^–1/, as compared to 200 g l^–1 of P by the original method. If a larger sample volume /30 ml/ is used, even 5 g l^–1 of P can be measured.     

Determination of fission product ruthenium by isotope dilution mass spectrometry

Isotope dilution mass spectrometry using enriched isotope⁹⁶Ru as a spike was applied to the determination of ruthenium as a fission product. Ruthenium in the solution was oxidized to RuO₄ by Ce/IV/ and separated from coexisting metal elements by distillation. Silica-gel technique was employed to enhance ion current of ruthenium in the mass spectrometric measurement. The lower detection limit was 0.005 g ml^–1 and the relative standard deviations /n=3/ for 1.2 and 0.05 g ml^–1 of ruthenium were 0.2 and 0.5%, respectively.     

Photometric detection of cyclodextrins in liquid chromatography by using iodine generated electrochemically in-situ

A method has been developed for photometric detection of cyclodextrins (CD) in liquid chromatography using iodine (I₂) generated electrochemically in-situ. Iodide ion in the mobile phase was electrochemically oxidized to I₂ which was subsequently reacted with I^–, in an electrochemical flow cell, forming I₃^–. The absorbance of I₃^– was found to be greatly enhanced when CD were present in the mobile phase. The absorbance enhancement was caused by the change in the mole fraction of I₃^–, because of the inclusion reaction of I₃^– with CD. On the basis of this phenomenon, CD were detected by means of a photodiode-array UV–visible detector positioned downstream of the electrochemical flow cell. The signals were found to be linearly dependent on CD concentration. Because the formation constants of I₃^– with CD decrease in the order -CD>-CD>-CD, -CD was most detectable by the method. Detection limits were 1.0 mol L^–1 for -CD, 65 mol L^–1 for monoG1--CD, 100 mol L^–1 for -CD, and 200 mol L^–1 for -CD.     

Simultaneous determination of chromium(VI) and chromium(III) by flame atomic absorption spectrometry with a chelating ion-exchange flow injection system

Summary Simultaneous Determination of Chromium(VI) and Chromium(III) by Flame Atomic Absorption Spectrometry with a Chelating Ion-Exchange Flow Injection System A simple method is described for the simultaneous determination of chromium(VI) and chromium(III) in a flow injection system comprising chelating ion-exchange and flame atomic absorption spectrometry. Sampling rates for 2001 and 1 ml sample volumes were 120 and 60 h^–1 (240 and 120 speciations per hour), respectively. Typical relative standard deviations were 0.52% for Cr(VI) (0.50g ml^–1 and 0.67% for Cr(III) (0.10,g ml^–1) and the corresponding limits of detection were 85 ng ml^–1, and 16 ng ml^–1, respectively.On leave from University of Belgrade.     

Difference spectrophotometric determination of some pharmaceutically important thioxanthene derivatives in dosage forms

A Spectrophotometric method is described for the rapid determination of four thioxanthene derivatives, namely chlorprothixene, thiothixene, flupenthixol hydrochloride and clopenthixol hydrochloride. The method is based on measuring the first derivative spectrum (D ₁) of the oxidized drug relative to a solution of the underivatized drug. At the wavelength of maximum difference in first derivative (range 285–315 nm), only the oxidation products have an appreciable difference in first derivative and the oxidizing agent has no absorbance. The oxidation products (assumed to be the thioxanthone sulphoxides) are formed rapidly at room temperature by the addition of peroxyacetic acid, prepared by the slow reaction of hydrogen peroxide and glacial acetic acid. The first derivative of the absorbance is proportional to the concentration of the drugs in solution over the ranges 2–14 g ml^–1 for chloroprothixene, 2–20 g ml^–1 for clopenthixol hydrochloride, 2–24 g ml^–1 for thiothixene and 4–40 g ml^–1 for flupenthixol hydrochloride. The method is specific for the intact drug and can be adopted in the presence of oxidative and photochemical decomposition products and tablet excipients. The recoveries ranged from 99.7 ± 1.3 to 100.2 ± 1.5%. The validity of the method was tested by analysing synthetic samples of thioxanthenes and some dosage forms containing the drugs; the results were in accordance with those given by the official methods.     

An upper bound to bond electric dipole moments

An upper bound can be set to the dipole moment of the X-H bond (with X+H^– polarity) for symmetrical molecules of XH₄ and XH₃ type from the experimental values of the g factor and bond length. The following upper bounds have been found to the bond dipole moments: CH₄ (C+H^–<0.902 D, SiH₄, (Si+H^–)<4.21 D, GeH₄+ (Ge+H^–)<3.59 D, NH₃ (N+H^–)<0, PH₃ (P+H^–)<2.74 D. These results enable one to rule out certain published data on the dipole moment of the C-H bond in methane as certainly incorrect. In the case of the ammonia molecule, the possibility of N+H^– polarity is ruled out.Translated from Teoreticheskaya i Éksperimental'naya Khitniya, No. 3, pp. 346–350, May–June, 1985.     

Spectrophotometric determination of vanadium(IV) in the presence of vanadium(V) using Br-PADAP

In the present paper, a simple and sensitive method is proposed for vanadium(IV) determination in the presence of vanadium(V). This is based on the oxidation of vanadium(IV) present in the sample to vanadium(V) by addition of iron(III) cation, followed by a complexation reaction of iron(II) with the spectrophotometric reagent 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP). The iron(II) reacts with Br-PADAP immediately, forming a stable complex with a large molar absorptivity. The vanadium(IV) determination is possible, with a calibration sensitivity of 0.549 g ml^–1, for an analytical curve of 18.8 ng ml^–1 to 2.40 g ml^–1, molar absorptivity of 2.80 × 10⁴ 1 mole^–1 cm^–1 and a detection limit of 5.5 ng ml^–1. Selectivity was increased with the use of EDTA as a masking agent. The proposed method was applied for the vanadium(IV) determination in the presence of several amounts of vanadium(V). The results revealed that 200 g of vanadium(V) do not interfere with determination of 5.00 g of vanadium(IV). The precision and the accuracy obtained were satisfactory (R. S. D.<2%).     

Platinum concentration in silicone breast implant material and capsular tissue by ICP-MS

Inductively coupled plasma-mass spectrometry (ICP-MS) was used to determine the concentration of platinum (Pt) in silicone breast implant gel (range, 0.26–48.90 g g^–1 Pt; n=15), elastomer (range, 3.05–28.78 g g^–1 Pt; n=7), double lumen (range, 5.79–125.27 g g^–1 Pt; n=7), foam (range, 5.79–8.36 g g^–1 Pt; n=2), and capsular tissue (range, 0.003–0.272 g g^–1 Pt; n=15). The results show that very high levels of Pt are present in the encasing elastomer, double lumen, and foam envelope materials. Silicone breast implants can be a source of significant Pt exposure for individuals with these implants.     

Determination of palladium, platinum and gold by first derivative spectrophotometry

Summary The application of first-derivative spectrometry to the simultaneous determination of palladium(II), platinum(IV) and gold(III) is described. Light absorption of stable chlorocomplexes formed in 1 mol/l hydrochloric acid provides the basis of their determinations. A difference in the derivative amplitudes between two first-derivative zero crossing points of one metal A is read, corrected for the contribution of metal B and used for quantitation of metal C. Palladium (0.48–20 g ml^–1), platinum (0.16–24 g ml^–1) and gold (0.32–24 g ml^–1) have been determined with good precision and accuracy without any separations. Results are also presented for the simultaneous determination of the three precious metals in the presence of several major constituents.     

Catalytic-fluorimetric determination of EDTA and iron(III) by flow injection analysis

Summary In this paper the authors report on several methods for the direct determination of EDTA and indirect determination of iron(III), based on the inhibition effect of EDTA on the catalytic action of copper (II) on the oxidation of 2,2-dipyridyl ketone hydrazone by hydrogen peroxide and on the decrease of this inhibition effect in the presence of Fe(III), respectively. These methods allow the determination of EDTA in the ranges of 0.4–2.0 g · ml^–1 and 0.2–1.0 g · ml^–1 for the normal and reversed FIA modes, respectively, and of 40–240 ng · ml^–1 for Fe(III) by reversed FIA.

---

Katalytisch-fluorimetrische Bestimmung von EDTA und Eisen(III) durch FließinjektionsanalyseInhibitionsmethoden

Zusammenfassung Verfahren zur direkten Bestimmung von EDTA sowie zur indirekten Bestimmung von Eisen(III) werden beschrieben. Sie beruhen auf der Inhibitorwirkung von EDTA auf den katalytischen Effekt von Kupfer(II) bei der Oxidation von 2,2-Dipyridylketonhydrazon mit Wasserstoffperoxid bzw. auf der Schwächung dieser Inhibitorwirkung in Gegenwart von Eisen(III). Es ist mit diesen Methoden möglich, EDTA im Bereich von 0,4–2,0 g/ml (normale FIA) bzw. 0,2–1,0 g/ml (umgekehrte FIA) und Eisen im Bereich von 40–240 ng/ml (umgekehrte FIA) zu bestimmen.

     

Determination of Benzimidazole Fungicides by HPLC with Fluorescence Detection After Micellar Extraction

An analytical method was developed to determine the benzimidazole fungicides and their residues (benomyl, carbendazim, thiabendazole and fuberidazole) in real water samples. Analyses were performed by reverse phase (RP) HPLC with direct fluorescence detection with mobile phase methanol:water, 40:60 (v/v) with 0.6% (v/v) ammonia. The extraction of analytes from water samples was performed with the use of micellar systems. Specifically, oligoethylene glycol monoalkyl ether (Genapol X-080) and polyoxyethylene 10 lauryl ether (POLE) were used as extractants. The recoveries of fungicides obtained in spiked water samples ranged from 68% to 94% for Genapol and from 68% to 96% for POLE. The limit of detection (LOD) was lower than 6 g L^–1 for carbendazim, 7 g L^–1 benomyl, 0.15 g L^–1 for thiabendazole and 0.01 g L^–1 for fuberidazole in both surfactants.     

A Simple Sensitive Spectrophotometric Method for the Determination of Ce4+ Using Variamine Blue as a Chromogenic Reagent

A rapid and sensitive spectrophotometric method is described for the determination of trace amounts of cerium using Variamine Blue (VB) as a chromogenic reagent. The proposed method is based on the reaction of cerium with potassium iodide in acidic medium to liberate iodine, which oxidizes Variamine Blue to give a violet colored species with an absorption maximum at 560nm. Beers law was obeyed in the range 2–10µg mL^–1 of cerium. The molar absorptivity and Sandells sensitivity are found to be 1.65×10⁴L mol^–1cm^–1 and 8.48×10^–3µgcm^–2, respectively. The proposed method has been successfully applied to the determination of cerium in alloy and synthetic mixtures.     

Nuclear interferences of uranium and thorium in a reactor neutron activation analysis determination of cerium using the radionuclides141Ce and143Ce

The interference contributions of uranium and thorium to the determination of cerium based on radionuclides¹⁴¹Ce and¹⁴³Ce produced by irradiation in a reactor core was determined. The values of the interference contributions for¹⁴¹Ce were 0.28±0.01 g Ce/g U and /2.01±0.05/x10^–3 g Ce/g Th, and for¹⁴³Ce 1.33±0.03 g Ce/g U and /9.0±0.2/x10^–3 g Ce/g Th.