A PC-Program for the Calculation of Neutron Flux and Element Contents Using the ki-Method of Neutron Activation Analysis

A computer program is described, which calculates the induced activities of isotopes after irradiation in a known neutron field, thermal and epithermal neutron fluxes from the measured induced activities and from nuclear data of 2–4 monitor nuclides as well as the element concentrations in samples irradiated together with the monitors. The program was developed for operation in Windows 3.1 (or higher). The application of the program for neutron activation analysis allows to simplify the experimental procedure and to reduce the time. The program was tested by measuring different types of standard reference materials at the FRJ-2 (Research Centre, Jülich, Germany) and Triga (University Mainz, Germany) reactors. Comparison of neutron flux parameters calculated by this program with those calculated by a VAX program developed at the Research Centre, Jülich was done. The results of testing seem to be satisfactory.     

Application of ICP-MS for Multielement Analysis in Small Sample Amoun ts of Pathological Thyroid Tissue

 As a result of the Chernobyl nuclear power plant accident in 1986, thyroid pathologies occurred among children in some regions of Belarus. Besides the irradiation of children’s thyroids by radioactive iodine and caesium nuclides, toxic elements from fallout are a direct risk to health. Inductively coupled plasma quadrupole-based mass spectrometry was used for multielement determination in small amounts (1–10 mg) of thyroid tissue samples obtained during thyroid operations in Minsk hospitals. The accuracy of the applied analytical technique for small biological sample amounts was checked using NIST Standard Reference Material oyster tissue (SRM 1566b) and by comparison with independent analytical methods, such as neutron activation analysis. Almost all essential elements as well as a number of toxic elements such as Cd, Pb, Hg, U etc. were determined in a multitude of human and animal thyroid tissues (up to 1 mg sample material) by quadrupole-based ICP-MS using micronebulization. In general, the thyroid tissue affected by pathology is characterized by higher calcium content. Some other elements, among them Fe, Mn, V, As, Cr, Ni, Pb, U, Ba, Sb, were also accumulated in such tissue. The results obtained will be used as initial material for further specific studies of the role of particular elements in thyroid pathology development. Received November 15, 1999. Revision March 15, 2000.     

Fissile radionuclides in thyroid of the inhabitants of the gomel region in belarus and peculiarities of their distribution

Severe radiation damages with the following substitution of connective tissue are the effect of high doses in microvolumes of the thyroid. Calcium, strontium and uranium deposited into these sections was more as compared to a normal tissue of the thyroid. An estimation of the microdistribution of fissile radionuclides was carried out using the method of fragmental radiography. The analysis of tracks done visually using a microscope magnification of 300 revealed the local density of fission fragments up to 10³ mm⁻². The irradiation of the surrounded cells which contain the hidden genetic damages, initiated by radioiodine, does not exclude their possible promoter role in thyroid cancerogenesis.     

Isotopic composition of commercially available uranium chemicals and elemental analysis standards

Journal of Radioanalytical and Nuclear Chemistry - Reference information on isotopic composition of various uranium materials, determined with high accuracy and precision, is of essential value for...     

ICP–MS with hexapole collision cell for isotope ratio measurements of Ca, Fe, and Se

To avoid mass interferences on analyte ions caused by argon ions and argon molecular ions via reactions with collision gases, an rf hexapole filled with helium and hydrogen has been used in inductively coupled plasma mass spectrometry (ICP–MS), and its performance has been studied. Up to tenfold improvement in sensitivity was observed for heavy elements (m > 100 u), because of better ion transmission through the hexapole ion guide. A reduction of argon ions Ar⁺ and the molecular ions of argon ArX⁺ (X = O, Ar) by up to three orders of magnitude was achieved in a hexapole collision cell of an ICP–MS (“Platform ICP”, Micromass, Manchester, UK) as a result of gas-phase reactions with hydrogen when the hexapole bias (HB) was set to 0 V; at an HB of 1.6 V argon, and argon-based ions of masses 40 u, 56 u, and 80 u, were reduced by approximately four, two, and five orders of magnitude, respectively. The signal-to-noise ratio ⁸⁰Se/ ⁴⁰Ar₂ ⁺ was improved by more than five orders of magnitude under optimized experimental conditions. Dependence of mass discrimination on collision-cell properties was studied in the mass range 10 u (boron) to 238 u (uranium). Isotopic analysis of the elements affected by mass-spectrometric interference, Ca, Fe, and Se, was performed using a Meinhard nebulizer and an ultrasonic nebulizer (USN). The measured isotope ratios were comparable with tabulated values from IUPAC. Precision of 0.26%, 0.19%, and 0.12%, respectively, and accuracy of 0.13% 0.25%, and 0.92%, respectively, was achieved for isotope ratios ⁴⁴Ca/ ⁴⁰Ca and ⁵⁶Fe/⁵⁷Fe in 10 μg L^–1 solution nebulized by means of a USN and for ⁷⁸Se/⁸⁰Se in 100 μg L^–1 solution nebulized by means of a Meinhard nebulizer. Received: 15 December 2000 / Revised: 26 March 2001 / Accepted: 27 March 2001     

Determination of stoichiometry and concentration of trace elements in thin BaxSr1–xTiO3 perovskite layers

This paper describes an analytical procedure for determining the stoichiometry of Ba_xSr_1–xTiO₃ perovskite layers using inductively coupled plasma mass spectrometry (ICP-MS). The analytical results of mass spectrometry measurements are compared to those of X-ray fluorescence analysis (XRF). The performance and the limits of solid-state mass spectrometry analytical methods for the surface analysis of thin Ba_xSr_1–xTiO₃ perovskite layers – sputtered neutral mass spectrometry (SNMS) – are investigated and discussed.     

Determining the isotopic compositions of uranium and fission products in radioactive environmental microsamples using laser ablation ICP–MS with multiple ion counters

This paper presents the application of a multicollector inductively coupled plasma mass spectrometer (MC–ICP–MS)—a Nu Plasma HR—equipped with three ion-counting multipliers and coupled to a laser ablation system (LA) for the rapid and sensitive determination of the ²³⁵U/²³⁸U, ²³⁶U/²³⁸U, ¹⁴⁵Nd/¹⁴³Nd, ¹⁴⁶Nd/¹⁴³Nd, ¹⁰¹Ru/(⁹⁹Ru+⁹⁹Tc) and ¹⁰²Ru/(⁹⁹Ru+⁹⁹Tc) isotope ratios in microsamples collected in the vicinity of Chernobyl. Microsamples with dimensions ranging from a hundred μm to about 1 mm and with surface alpha activities of 3–38 mBq were first identified using nuclear track radiography. U, Nd and Ru isotope systems were then measured sequentially for the same microsample by LA–MC–ICP–MS. The application of a zoom ion optic for aligning the ion beams into the ion counters allows fast switching between different isotope systems, which enables all of the abovementioned isotope ratios to be measured for the same microsample within a total analysis time of 15–20 min (excluding MC–ICP–MS optimization and calibration). The ¹⁰¹Ru/(⁹⁹Ru+⁹⁹Tc) and ¹⁰²Ru/(⁹⁹Ru+⁹⁹Tc) isotope ratios were measured for four microsamples and were found to be significantly lower than the natural ratios, indicating that the microsamples were contaminated with the corresponding fission products (Ru and Tc). A slight depletion in ¹⁴⁶Nd of about 3–5% was observed in the contaminated samples, but the Nd isotopic ratios measured in the contaminated samples coincided with natural isotopic composition within the measurement uncertainty, as most of the Nd in the analyzed samples originates from the natural soil load of this element. The ²³⁵U/²³⁸U and ²³⁶U/²³⁸U isotope ratios were the most sensitive indicators of irradiated uranium. The present work yielded a significant variation in uranium isotope ratios in microsamples, in contrast with previously published results from the bulk analysis of contaminated samples originating from the vicinity of Chernobyl. Thus, the ²³⁵U/²³⁸U ratios measured in ten microsamples varied in the range from 0.0073 (corresponding to the natural uranium isotopic composition) to 0.023 (corresponding to initial ²³⁵U enrichment in reactor fuel). An inverse correlation was observed between the ²³⁶U/²³⁸U and ²³⁵U/²³⁸U isotope ratios, except in the case of one sample with natural uranium. The heterogeneity of the uranium isotope composition is attributed to the different burn-up grades of uranium in the fuel rods from which the microsamples originated. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Determination of phosphorus in small amounts of protein samples by ICP–MS

Inductively coupled plasma mass spectrometry (ICP-MS) is used for phosphorus determination in protein samples. A small amount of solid protein sample (down to 1 micro g) or digest (1-10 micro L) protein solution was denatured in nitric acid and hydrogen peroxide by closed-microvessel microwave digestion. Phosphorus determination was performed with an optimized analytical method using a double-focusing sector field inductively coupled plasma mass spectrometer (ICP-SFMS) and quadrupole-based ICP-MS (ICP-QMS). For quality control of phosphorus determination a certified reference material (CRM), single cell proteins (BCR 273) with a high phosphorus content of 26.8+/-0.4 mg g(-1), was analyzed. For studies on phosphorus determination in proteins while reducing the sample amount as low as possible the homogeneity of CRM BCR 273 was investigated. Relative standard deviation and measurement accuracy in ICP-QMS was within 2%, 3.5%, 11% and 12% when using CRM BCR 273 sample weights of 40 mg, 5 mg, 1 mg and 0.3 mg, respectively. The lowest possible sample weight for an accurate phosphorus analysis in protein samples by ICP-MS is discussed. The analytical method developed was applied for the analysis of homogeneous protein samples in very low amounts [1-100 micro g of solid protein sample, e.g. beta-casein or down to 1 micro L of protein or digest in solution (e.g., tau protein)]. A further reduction of the diluted protein solution volume was achieved by the application of flow injection in ICP-SFMS, which is discussed with reference to real protein digests after protein separation using 2D gel electrophoresis.The detection limits for phosphorus in biological samples were determined by ICP-SFMS down to the ng g(-1) level. The present work discusses the figure of merit for the determination of phosphorus in a small amount of protein sample with ICP-SFMS in comparison to ICP-QMS.     

ICP-MS with hexapole collision cell for isotope ratio measurements of Ca, Fe, and Se

To avoid mass interferences on analyte ions caused by argon ions and argon molecular ions via reactions with collision gases, an rf hexapole filled with helium and hydrogen has been used in inductively coupled plasma mass spectrometry (ICP-MS), and its performance has been studied. Up to tenfold improvement in sensitivity was observed for heavy elements (m > 100 u), because of better ion transmission through the hexapole ion guide. A reduction of argon ions Ar+ and the molecular ions of argon ArX+ (X = O, Ar) by up to three orders of magnitude was achieved in a hexapole collision cell of an ICP-MS ("Platform ICP", Micromass, Manchester, UK) as a result of gas-phase reactions with hydrogen when the hexapole bias (HB) was set to 0 V; at an HB of 1.6 V argon, and argon-based ions of masses 40 u, 56 u, and 80 u, were reduced by approximately four, two, and five orders of magnitude, respectively. The signal-to-noise ratio 80Se/ 40Ar2+ was improved by more than five orders of magnitude under optimized experimental conditions. Dependence of mass discrimination on collision-cell properties was studied in the mass range 10 u (boron) to 238 u (uranium). Isotopic analysis of the elements affected by mass-spectrometric interference, Ca, Fe, and Se, was performed using a Meinhard nebulizer and an ultrasonic nebulizer (USN). The measured isotope ratios were comparable with tabulated values from IUPAC. Precision of 0.26%, 0.19%, and 0.12%, respectively, and accuracy of 0.13% 0.25%, and 0.92%, respectively, was achieved for isotope ratios 44Ca/ 40Ca and 56Fe/57Fe in 10 microg L(-1) solution nebulized by means of a USN and for 78Se/80Se in 100 microg L(-1) solution nebulized by means of a Meinhard nebulizer.     

Nuclear track radiography of “Hot” aerosol particles

Nuclear track radiography was applied to identify aerosol “hot” particles which contain elements of nuclear fuel and fallout after Chernobyl NPP accident. For the determination of the content of transuranium elements in radioactive aerosols the measurement of the -activity of “hot” particles by SSNTD was used in this work, as well as radiography of fission fragments formed as a result of the reactions (n,f) and (γ,f) in the irradiation of aerosol filters by thermal neutrons and high energy gamma quanta. The technique allowed the sizes and alpha-activity of “hot” particles to be determined without extracting them from the filter, as well as the determination of the uranium content and its enrichment by ²³⁵U, ²³⁹Pu and ²⁴¹Pu isotopes. Sensitivity of determination of alpha activity by fission method is 5×10⁻⁶ Bq per particle. The software for the system of image analysis was created. It ensured the identification of track clusters on an optical image of the SSNTD surface obtained through a video camera and the determination of size and activity of “hot” particles.