Two-step adsorption on jungle-gym-type porous coordination polymers: dependence on hydrogen-bonding capability of adsorbates, ligand-substituent effect, and temperature

A preliminary study of isopropanol (IPA) adsorption/desorption isotherms on a jungle-gym-type porous coordination polymer, [Zn(2)(bdc)(2)(dabco)](n) (1, H(2)bdc = 1,4-benzenedicarboxylic acid, dabco =1,4-diazabicyclo[2.2.2]octane), showed unambiguous two-step profiles via a highly shrunk intermediate framework. The results of adsorption measurements on 1, using probing gas molecules of alcohol (MeOH and EtOH) for the size effect and Me(2)CO for the influence of hydrogen bonding, show that alcohol adsorption isotherms are gradual two-step profiles, whereas the Me(2)CO isotherm is a typical type-I isotherm, indicating that a two-step adsorption/desorption is involved with hydrogen bonds. To further clarify these characteristic adsorption/desorption behaviors, selecting nitroterephthalate (bdc-NO(2)), bromoterephthalate (bdc-Br), and 2,5-dichloroterephthalate (bdc-Cl(2)) as substituted dicarboxylate ligands, isomorphous jungle-gym-type porous coordination polymers, {[Zn(2)(bdc-NO(2))(2)(dabco)]·solvents}(n) (2 ? solvents), {[Zn(2)(bdc-Br)(2)(dabco)]·solvents}(n) (3 ? solvents), and {[Zn(2)(bdc-Cl(2))(2)(dabco)]·solvents}(n) (4 ? solvents), were synthesized and characterized by single-crystal X-ray analyses. Thermal gravimetry, X-ray powder diffraction, and N(2) adsorption at 77 K measurements reveal that [Zn(2)(bdc-NO(2))(2)(dabco)](n) (2), [Zn(2)(bdc-Br)(2)(dabco)](n) (3), and [Zn(2)(bdc-Cl(2))(2)(dabco)](n) (4) maintain their frameworks without guest molecules with Brunauer-Emmett-Teller (BET) surface areas of 1568 (2), 1292 (3), and 1216 (4) m(2) g(-1). As found in results of MeOH, EtOH, IPA, and Me(2)CO adsorption/desorption on 2-4, only MeOH adsorption on 2 shows an obvious two-step profile. Considering the substituent effects and adsorbate sizes, the hydrogen bonds, which are triggers for two-step adsorption, are formed between adsorbates and carboxylate groups at the corners in the pores, inducing wide pores to become narrow pores. Interestingly, such a two-step MeOH adsorption on 2 depends on the temperature, attributed to the small free-energy difference (ΔF(host)) between the two guest-free forms, wide and narrow pores.     

Efficient hydrogen sorption in 8-connected MOFs based on trinuclear pinwheel motifs

Two new metal-organic frameworks based on trinuclear pinwheel motifs are prepared using dicarboxylate and diamine ligands. The structure of [Co3(bdc)3(dabco)] (1) (bdc = 1,4-benzenedicarboxylate; dabco = 1,4-diazabicyclo[2.2.2]octane) is described as pillared layers, whereas [Co3(ndc)3(dabco)] (2) (ndc = 2,6-naphthalenedicarboxylate) forms a variation of primitive cubic net with 3D connected pores. The two 8-connected MOFs are thermally stable at 160 and 250 degrees C for 1 and 2 respectively in the air and possess corrugated channels owing to the high connectivities of the secondary building unit. As a result, they show highly efficient hydrogen sorption capabilities. Especially, a high hydrogen uptake (2.45 wt % at 77 K and 1 bar) is observed for 2 that has the unique combination of high surface area and small portals.     

Flexibility and sorption selectivity in rigid metal-organic frameworks: the impact of ether-functionalised linkers

The functionalisation of well-known rigid metal-organic frameworks (namely, [Zn(4)O(bdc)(3)](n), MOF-5, IRMOF-1 and [Zn(2)(bdc)(2)(dabco)](n); bdc = 1,4-benzene dicarboxylate, dabco = diazabicyclo[2.2.2]octane) with additional alkyl ether groups of the type -O-(CH(2))(n)-O-CH(3) (n = 2-4) initiates unexpected structural flexibility, as well as high sorption selectivity towards CO(2) over N(2) and CH(4) in the porous materials. These novel materials respond to the presence/absence of guest molecules with structural transformations. We found that the chain length of the alkyl ether groups and the substitution pattern of the bdc-type linker have a major impact on structural flexibility and sorption selectivity. Remarkably, our results show that a high crystalline order of the activated material is not a prerequisite to achieve significant porosity and high sorption selectivity.     

Mixed-ligand metal-organic frameworks with large pores: gas sorption properties and single-crystal-to-single-crystal transformation on guest exchange

Two isomorphous 3D metal-organic frameworks, {[Cu2(BPnDC)2(bpy)].8 DMF.6 H2O}n (1) and {[Zn2(BPnDC)2(dabco)].13 DMF.3 H2O}n (2), have been prepared by the solvothermal reactions of benzophenone 4,4'-dicarboxylic acid (H2BPnDC) with Cu(NO3)(2).2.5 H2O and 4,4'-bipyridine (bpy), and with Zn(NO3)(2).6 H2O and 4-diazabicyclo[2.2.2]octane (dabco), respectively. Compounds 1 and 2 are composed of paddle-wheel {M2(O2CR)4} cluster units, and they generate 2D channels with two different large pores (effective size of larger pore: 18.2 A for 1, 11.4 A for 2). The framework structure of desolvated solid, [Cu2(BPnDC)2(bpy)]n (SNU-6; SNU=Seoul National University), is the same as that of 1, as evidenced by powder X-ray diffraction patterns. SNU-6 exhibits high permanent porosity (1.05 cm3 g(-1)) with high Langmuir surface area (2910 m2 g(-1)). It shows high H2 gas storage capacity (1.68 wt % at 77 K and 1 atm; 4.87 wt % (excess) and 10.0 wt % (total) at 77 K and 70 bar) with high isosteric heat (7.74 kJ mol(-1)) of H2 adsorption as well as high CO2 adsorption capability (113.8 wt % at 195 K and 1 atm). Compound 2 undergoes a single-crystal-to-single-crystal transformation on guest exchange with n-hexane to provide {[Zn2(BPnDC)2(dabco)].6 (n-hexane).3 H2O}n (2hexane). The transformation involves dynamic motion of the molecular components in the crystal, mainly a bending motion of the square planes of the paddle-wheel units resulting from rotational rearrangement of phenyl rings and carboxylate planes of BPnDC2-.     

High-pressure in situ 129Xe NMR spectroscopy and computer simulations of breathing transitions in the metal-organic framework Ni2(2,6-ndc)2(dabco) (DUT-8(Ni))

Recently, we have described the metal-organic framework Ni(2)(2,6-ndc)(2)(dabco), denoted as DUT-8(Ni) (1) (DUT = Dresden University of Technology, 2,6-ndc = 2,6-naphthalenedicarboxylate, dabco = 1,4-diazabicyclo[2.2.2]octane). Upon adsorption of molecules such as nitrogen and xenon, this material exhibits a pronounced gate-pressure effect which is accompanied by a large change of the specific volume. Here, we describe the use of high-pressure in situ (129)Xe NMR spectroscopy, i.e., the NMR spectroscopic measurements of xenon adsorption/desorption isotherms and isobars, to characterize this effect. It appears that the pore system of DUT-8(Ni) takes up xenon until a liquid-like state is reached. Deeper insight into the interactions between the host DUT-8(Ni) and the guest atom xenon is gained from ab initio molecular dynamics (MD) simulations. van der Waals interactions are included for the first time in these calculations on a metal-organic framework compound. MD simulations allow the identification of preferred adsorption sites for xenon as well as insight into the breathing effect at a molecular scale. Grand canonical Monte Carlo (GCMC) simulations have been performed in order to simulate adsorption isotherms. Furthermore, the favorable influence of a sample pretreatment using solvent exchange and drying with supercritical CO(2) as well as the influence of repeated pore opening/closure processes, i.e., the "aging behavior" of the compound, can be visualized by (129)Xe NMR spectroscopy.     

Directing the breathing behavior of pillared-layered metal-organic frameworks via a systematic library of functionalized linkers bearing flexible substituents

Flexible metal-organic frameworks (MOFs), also referred to as soft porous crystals (SPCs), show reversible structural transitions dependent on the nature and quantity of adsorbed guest molecules. In recent studies it has been reported that covalent functionalization of the organic linker can influence or even integrate framework flexibility ("breathing") in MOFs. However, rational fine-tuning of such responsive properties is very desirable but challenging as well. Here we present a powerful approach for the targeted manipulation of responsiveness and framework flexibility of an important family of pillared-layered MOFs based on the parent structure [Zn(2)(bdc)(2)(dabco)](n) (bdc = 1,4-benzenedicarboxylate; dabco = 1,4-diazabicyclo[2.2.2]octane). A library of functionalized bdc-type linkers (fu-bdc), which bear additional dangling side groups at different positions of the benzene core (alkoxy groups of varying chain length with diverse functionalities and polarity), was generated. Synthesis of the materials [Zn(2)(fu-bdc)(2)(dabco)](n) yields the respective collection of highly responsive MOFs. The parent MOF is only weakly flexible; however, the substituted frameworks of [Zn(2)(fu-bdc)(2)(dabco)](n) contract drastically upon guest removal and expand again upon adsorption of DMF (N,N-dimethylformamide), EtOH, or CO(2), etc., while N(2) is hardly adsorbed and does not open the narrow-pored form. These "breathing" dynamics are attributed to the dangling side chains that act as immobilized "guests", which interact with mobile guest molecules as well as with themselves and with the framework backbone. The structural details of the guest-free, contracted form and the gas sorption behavior (phase transition pressure, hysteresis loop) are highly dependent on the nature of the substituent at the linker and can therefore be adjusted using our approach. Combining our library of functionalized linkers with the concept of mixed-component MOFs (solid solutions) offers very rich additional dimensions of tailoring the structural dynamics and responsiveness. Implementation of two differently functionalized linkers in varying ratios yields multicomponent single-phased [Zn(2)(fu-bdc')(2x)(fu-bdc″)(2-2x)(dabco)](n) MOFs (0 < x < 1) of increased inherent complexity, which feature a non-linear dependence of their gas sorption properties on the applied ratio of components. Hence, the responsive behavior of such pillared-layered MOFs can be extensively tuned via an intelligent combination of functionalized linkers.     

Tuning MOF Stability and Porosity via Adding Rigid Pillars

High stability and permanent porosity are the premise of general applicability for metal-organic framework materials (MOFs). By varying degrees of success on increasing the connectivity of the linear pillar 4,4'-bipyridine (bpy), two isostructural flexible frameworks [M(2)(obb)(2)(DMF)(2)]·2DMF (1, M = Zn or Cu; H(2)obb = 4,4'-oxybis(benzoic acid), DMF = N,N-dimethylformamide) with no gas sorption are structurally modified into two rigid frameworks [Zn(2)(obb)(2)(bpy)]·DMF (2) and [Cu(2)(obb)(2)(bpy)(0.5)(DMF)]·2DMF (3) with notable gas sorption and separation properties. Especially for 3, it exhibits gas selective uptake for the adsorption of CO(2) over N(2) and CH(4) under 273 K and has an interesting physically lock effect in benzene and cyclohexane sorption. The results provide a successful strategy on tuning framework stability of flexible structures via adding rigid pillars.     

Rationally designed, polymeric, extended metal-ciprofloxacin complexes

Reactions of the antimicrobial fluoroquinolone ciprofloxacin (cfH) with metal salts in the presence of aromatic polycarboxylate ligands or under basic conditions produce fourteen new metal-cfH complexes, namely, [Ba2(cf)2(1,4-bdc)(H2O)2] x H2O (1), [Sr6(cf)6(1,4-bdc)3(H2O)6] x 2H2O (2), [M2(cfH)2(bptc)(H2O)2] x 8H2O (M = Mn3 and Cd4), [M(cfH)(1,3-bdc)] (M = Mn5, Co6, and Zn7), [Zn2(cfH)4(1,4-bdc)](1,4-bdc) x 13H2O (8), [Ca(cfH)2(1,2-Hbdc)2] x 2H2O (9) and [M(cf)2] x 2.5H2O (M = Mn10, Co11, Zn12, Cd13, and Mg14) (1,4-bdc = 1,4-benzenedicarboxylate, bptc = 3,3',4,4'-benzophenonetetracarboxylate, 1,3-bdc = 1,3-benzenedicarboxylate, 1,2-bdc = 1,2-benzenedicarboxylate). Their structures were determined by single-crystal X-ray diffraction analyses and further characterized by elemental analyses, IR spectra, and thermogravimetric analyses. The structures of 1 and 2 consist of unique two-dimensional arm-shaped layers. Compounds 3 and 4 are isostructural and feature one-dimensional structures formed from the interconnection of [M2(cfH)2(H2O)2] dimers with bptc ligands. Compounds 5-7 are isostructural and contain double-chain-like ribbons constructed from [M2(cfH)2(CO2)2] dimers and 1,3-bdc. Compound 8 consists of a pair of [Zn(cfH)2]2+ fragments bridged by a 1,4-bdc into a dinuclear dumbbell structure. Compound 9 is a neutral monomeric complex. To the best of our knowledge, compounds 1-9 are the first examples of metal-quinolone complexes that contain aromatic polycarboxylate ligands. Compounds 10-14 are isostructural and exhibit interesting two-dimensional rhombic grids featuring large cavities with dimensions of 13.6x13.6 A. Up to now, polymeric extended metal-cfH complexes have never been reported.     

Water-free neodymium 2,6-naphthalenedicarboxylates coordination complexes and their application as catalysts for isoprene polymerization

A series of four coordination polymers based on neodymium have been hydrothermally synthesized with different carboxylic acids as a linker. The structures of the compounds Nd(2)(2,6-ndc)(3)(H(2)O)(3)·H(2)O (1), Nd(2)(2,6-ndc)(2)(ox)(H(2)O)(2) (2), and Nd(2,6-ndc)(form) (3) (2,6-ndc = 2,6-naphthalenedicarboxylate; ox = oxalate; and form = formate) have been determined by single-crystal X-ray diffraction analysis. They exhibit rather dense networks built up from infinite chains of NdO polyhedra connected to each other through the 2,6-ndc ligand. Terminal and bridging aquo species are present in the coordination sphere of Nd for 1, whereas some of them are partially replaced by oxalate groups in 2 and fully substituted by formate groups in 3. The water-free phase 3 as well as the compound Nd(form)(3) (4) were considered for catalytic reaction for polymerization of isoprene in the presence of Al-based cocatalyst, affording cis-polyisoprene with good conversions. Residual Nd material with unchanged structure was found in the polymeric material. The neodymium luminescence of compounds 3 and 4 was also measured.     

Engineered Bifunctional Luminescent Pillared-Layer Frameworks for Adsorption of CO2 and Sensitive Detection of Nitrobenzene in Aqueous Media

Through a dual-ligand synthetic approach, five isoreticular primitive cubic (pcu)-type pillared-layer metal–organic frameworks (MOFs), [Zn₂(dicarboxylate)₂(NI-bpy-44)] ⋅ x DMF ⋅ y H₂O, in which dicarboxylate=1,4-bdc ( 1 ), Br-1,4-bdc ( 2 ), NH₂-1,4-bdc ( 3 ), 2,6-ndc ( 4 ), and bpdc ( 5 ), have been engineered. MOFs 1 – 5 feature twofold degrees of interpenetration and have open pores of 27.0, 33.6, 36.8, 52.5, and 62.1 %, respectively. Nitrogen adsorption isotherms of activated MOFs 1′ – 5′ at 77 K all displayed type I adsorption behavior, suggesting their microporous nature. Although 1′ and 3′ – 5′ exhibited type I adsorption isotherms of CO₂ at 195 K, MOF 2′ showed a two-step gate-opening sorption isotherm of CO₂. Furthermore, MOF 3′ also had a significant influence of amine functions on CO₂ uptake at high temperature due to the CO₂–framework interactions. MOFs 1 – 5 revealed solvent-dependent fluorescence properties; their strong blue-light emissions in aqueous suspensions were efficiently quenched by trace amounts of nitrobenzene (NB), with limits of detection of 4.54, 5.73, 1.88, 2.30, and 2.26 μm , respectively, and Stern–Volmer quenching constants (K_sv) of 2.93×10³, 1.79×10³, 3.78×10³, 4.04×10³, and 3.21×10³ m ⁻¹, respectively. Of particular note, the NB-included framework, NB@ 3 , provided direct evidence of the binding sites, which showed strong host–guest π–π and hydrogen-bonding interactions beneficial for donor–acceptor electron transfer and resulting in fluorescence quenching.     

A new ZnII two-dimensional coordination polymer, {[Zn(μ-4,4′-bipy)(1,4-ndc)(H2O)2] · (H2O)} n (4,4′-bipy= 4,4′-bipyridine and 1,4-ndc=1,4-naphthalenedicarboxylate)

A 2D Zn^II(μ-4,4′-bipy) coordination polymer with 1,4-naphthalenedicarboxylate, {[Zn(μ-4,4′-bipy)(1,4-ndc)(H₂O)₂] · (H₂O)} _n , has been synthesized, characterized and studied by X-ray crystallography. The structural studies show the Zn atoms have six-coordinate geometry with a distorted octahedral environment. The 2D structure is grown by hydrogen bonds into a hybrid three-dimensional network.     

Pentacobalt(II) cluster based pcu network exhibits both magnetic slow-relaxation and hysteresis behaviour

A pentacobalt(II) cluster based 3D pcu network, [Co(5)(μ(3)-OH)(2)(bpdc)(4)(dabco)(H(2)O)(2)] (bpdc = benzophenone-2,4'-dicarboxylate and dabco = 1,4-diazabicyclo[2,2,2] octane), exhibiting both slow magnetic relaxation and hysteresis behavior, has been hydrothermally synthesized.     

Synthesis and Crystal Structure of a New Lead Coordination Polymer： [Pb（L）（1,4-ndc）]

The title coordination polymer, [Pb(L)(1,4-ndc)] 1 (L = 2-(4-fluorophenyl)-1Himidazo[4,5f1,10]phenanthroline, 1,4-ndc = naphthalene-1,4-dicarboxylic acid), has been obtained by using hydrothermal synthesis and characterized by elemental analysis, IR and singlecrystal X-ray diffraction. It crystallizes in monoclinic, space group P21/c with a = 10.1043(11), b = 14.3162(15), c = 17.6061(18), β = 95.3990(10)°, V = 2535.5(5)3, Z = 4, C31H17FN4O4Pb, Mr = 735.68, Dc = 1.927 g/cm3, F(000) = 1416, μ(MoKa) = 6.709 mm-1, R = 0.0201 and wR = 0.0489. The 1,4-ndc dianions link neighboring Pb(II) atoms in a bis-chelating mode, yielding a one-dimensional chain structure along the c axis. The C–H···π interactions between the carbon atom of L ligand and the benzene ring of 1,4-ndc lead the one-dimensional chains to form a two-dimensional supramolecular layer. The π-π interactions between L ligand and 1,4-ndc ligand make the two-dimensional layers generate a three-dimensional supramolecular architecture. Additionally, the N–H···O hydrogen bonds further stabilize the structure of 1.     

The first porous MOF with photoswitchable linker molecules

We synthesized a porous twofold interpenetrated MOF [Zn(2)(NDC)(2)(1)] (coined CAU-5) using 3-azo-phenyl-4,4'-bipyridine (1), 2,6-naphthalenedicarboxylic acid, and Zn(NO(3))(2)·6H(2)O. The azo-functionality protrudes into the pores, and can be switched, by irradiation with UV light (365 nm), from the thermodynamically stable trans-isomer to the cis-isomer. Back-switching was achieved thermally and with an irradiation wavelength of λ(max) = 440 nm.     

Effect of the guest solvent molecules on preparation of different morphologies of ZnO nanomaterials from the [Zn2(1,4-bdc)2(dabco)] metal-organic framework

The host and the apohost framework of [Zn₂(1,4-bdc)₂(dabco)]?·?4DMF?·?½H₂O (1?·?4DMF?·?½H₂O) (1,4-bdc?=?1,4-benzenedicarboxylate and dabco?=?1,4-diazabicyclo[2.2.2]octane) were used for the preparation of ZnO nanomaterials. With calcination of the host framework of 1?·?4DMF?·?½H₂O, ZnO nanoparticles could be fabricated. By the same process on fully desolvated framework of 1, ZnO microrods composed of ZnO nanoparticles were formed. These results indicate with removal of the guest solvent from the pores of this metal-organic framework (MOF), nanoparticle agglomeration increases and the role of this MOF in preparation of ZnO nanoparticles was reduced.     

Liquid phase separation of polyaromatics on [Cu2(BDC)2(dabco)

The porous coordination polymer (PCP) [Cu(2)(BDC)(2)(dabco)] is capable of selectively adsorbing up to 25 wt % of either 1-methylnaphthalene or 2-methylnaphthalene. Uptakes of unsubstituted naphthalene and 1,4-dimethylnaphthalene are significantly lower (7-13 wt %), suggesting that monomethyl substituted polyaromatics can be separated from the other fractions. Furthermore, this PCP can perform the difficult separation of 1-methylnaphthalene from 2-methylnaphthalene with separation factors as high as 2.6, proving that specific interactions of the methyl group with the lattice play an important role in determining the adsorption selectivity.     

1D helix, 2D brick-wall and herringbone, and 3D interpenetration d10 metal-organic framework structures assembled from pyridine-2,6-dicarboxylic acid N-oxide

Five novel interesting d(10) metal coordination polymers, [Zn(PDCO)(H2O)2]n (PDCO = pyridine-2,6-dicarboxylic acid N-oxide) (1), [Zn2(PDCO)2(4,4'-bpy)2(H2O)2.3H2O]n (bpy = bipyridine) (2), [Zn(PDCO)(bix)]n (bix = 1,4-bis(imidazol-1-ylmethyl)benzene) (3), [Zn(PDCO)(bbi).0.5H2O]n (bbi = 1,1'-(1,4-butanediyl)bis(imidazole)) (4), and [Cd(PDCO)(bix)(1.5).1.5H2O]n (5), have been synthesized under hydrothermal conditions and structurally characterized. Polymer 1 possesses a one-dimensional (1D) helical chainlike structure with 4(1) helices running along the c-axis with a pitch of 10.090 Angstroms. Polymer 2 has an infinite chiral two-dimensional (2D) brick-wall-like layer structure in the ac plane built from achiral components, while both 3 and 4 exhibit an infinite 2D herringbone architecture, respectively extended in the ac and ab plane. Polymer 5 features a most remarkable and unique three-dimensional (3D) porous framework with 2-fold interpenetration related by symmetry, which contains channels in the b and c directions, both distributed in a rectangular grid fashion. Compounds 1-5, with systematic variation in dimensionality from 1D to 2D to 3D, are the first examples of d(10) metal coordination polymers into which pyridinedicarboxylic acid N-oxide has been introduced. In addition, polymers 1, 4, and 5 display strong blue fluorescent emissions in the solid state. Polymer 3 exhibits a strong SHG response, estimated to be approximately 0.9 times that of urea.     

Self-assembly, crystal structures, and properties of metal-2-sulfoterephthalate frameworks based on [M4(μ3-OH)2]6+ clusters (M = Co, Mn, Zn and Cd)

Hydro- and solvo-thermal reactions of d-block metal ions (Mn(2+), Co(2+), Zn(2+) and Cd(2+)) with monosodium 2-sulfoterephthalate (NaH(2)stp) form six 3D coordination polymers featuring cluster core [M(4)(μ(3)-OH)(2)](6+) in common: [M(2)(μ(3)-OH)(stp)(H(2)O)] (M = Co (1), Mn (2) and Zn (3)), [Zn(2)(μ(3)-OH)(stp)(H(2)O)(2)] (4), [Zn(4)(μ(3)-OH)(2)(stp)(2)(bpy)(2)(H(2)O)]·3.5H(2)O (5) and [Cd(2)(μ(3)-OH)(stp) (bpp)(2)]·H(2)O (6) (stp = 2-sulfoterephthalate, bpy = 4,4'-bipyridine and bpp = 1,3-di(4-pyridyl)propane). All these coordination polymers were characterized by single crystal X-ray diffraction, IR spectroscopy, thermogravimetric and elemental analysis. Complexes 1-3 are isostructural coordination polymers with 3D frameworks based on the chair-like [Zn(4)(μ(3)-OH)(2)](6+) core and the quintuple helixes. In complex 4, there exist double helixes in the 3D framework based on the chair-like cluster cores. Complex 5 possesses a 2-fold interpenetration structure constructed from boat-like cluster core and the bridging ligands stp and bpy. For complex 6, the chair-like cluster cores and stp ligands form a 2D (4,4) network which is further pillared by bpp linkers to a 3D architecture. Magnetic studies indicate that complex 1 exhibits magnetic ordering below 4.9 K with spin canting, and complex 2 shows weak antiferromagnetic coupling between the Mn(II) ions with g = 2.02, J(wb) = -2.88 cm(-1), J(bb) = -0.37 cm(-1). The fluorescence studies show that the emissions of complexes 3-6 are attributed to the ligand π-π* transition.     

Synthesis, structures, and properties of two three-dimensional metal-organic frameworks, based on concurrent ligand extension

A tritopic carboxylate ligand, tris(4'-carboxybiphenyl)amine (L-H(3)), has been synthesized and applied in the construction of microporous metal-organic frameworks (MOFs). Two novel metal-organic frameworks (MOFs), {[Zn(2)(L)(OH)]·2DMF·H(2)O}(∞) (1) and {[Cu(L-H)(DMA)]·DMA·2H(2)O}(∞) (2), have been constructed out of L-H(3), Zn(2+), and Cu(2+), respectively. 1 has a 2-fold interpenetrating three-dimensional framework formed by L connectors and the [Zn(2)(CO(2))(3)] secondary building units (SBUs). As for 1, it is worth pointing out that one μ(2)-OH group links two Zn atoms between two neighboring SBUs to produce interesting Zn-O-Zn zigzag chains in the structure. 2 has a two-dimensional grid sheet formed by L-H connectors and the typical paddle-wheel [Cu(2)(CO(2))(4)] SBUs. Two-dimensional (2D) sheets nest with each other, which finally forms a three-dimensional (3D) nested framework. Two MOFs are characterized by infrared (IR) spectroscopy, thermogravimetry, single-crystal and elemental analyses, and powder X-ray diffraction methods. Framework 1' exhibits high permanent porosity (Langmuir surface area = 848 m(2)/g), high thermal stability (up to 450 °C), highly active properties for Friedel-Crafts alkylation reaction, as well as the potential application for the CO(2) gas storage and luminescent material. The catalytic results reveal that 2' is indeed an efficient heterogeneous catalyst for olefin epoxidation reactions.     

Release behavior,kinetic and antimicrobial study of nalidixic acid from [Zn2(bdc)2(dabco)] metal-organic frameworks

In the present study, a hydrothermal method was developed to prepare nalidixic acid-loaded [Zn₂(bdc)₂(dabco)] metal–organic frameworks. The self-assembly of primary building blocks was used for synthesis of [Zn₂(bdc)₂(dabco)] at room temperature. The zinc metal ion was used as a connector, 1,4-benzenedicarboxylate (bdc) as a chelating ligand, and 1,4-diazabicyclo[2.2.2]octane (dabco) as a bridging ligand. The metal organic frameworks were used as the carriers for drug delivery system, where it could entrap nalidixic acid as a model drug. X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), ultraviolet-visible spectroscopy (UV–vis), BET nitrogen adsorption–desorption method, and scanning electron microscopy (SEM) were used for characterization of samples. The drug release was also monitored, and 96 and 62% of the loaded drug were released over 120 h at pH values of 5.0 and 7.4, respectively. The antimicrobial activities of [Zn₂(bdc)₂(dabco)] and nalidixic acid-loaded [Zn₂(bdc)₂(dabco)] were tested against Gram-positive and Gram-negative species. The results revealed that this nanoscale metal organic framework may be regarded as a simple and stable platform for drug release in the treatment of infectious diseases.