二氧化硅-聚丙烯腈核-壳结构复合纳米粒子的制备与表征

以甲基丙烯酸-3-(三甲氧基硅基)丙酯改性的SiO2纳米粒子为种子,采用乳液聚合法制备了粒径分布较窄的SiO2-聚丙烯腈(SiO2-PAN)核-壳结构复合纳米粒子。采用动态光散射、傅里叶红外光谱、透射电镜和扫描电镜表征了复合纳米粒子的粒径及分布、组成、形态和结构,并研究了表面活性剂的加入方式、反应温度及交联剂的引入对制备SiO2-PAN复合纳米粒子的影响。结果表明:SiO2-PAN复合纳米粒子为核-壳结构。采用半连续加入表面活性剂的方法,可以成功抑制乳液聚合中次级粒子的生成。通过增加表面活性剂的初始加入量、加快表面活性剂的补加速率,或降低反应温度,可使SiO2-PAN复合纳米粒子的粒径变小。反应温度的降低以及交联剂的引入使SiO2-PAN复合纳米粒子的表面变得平滑。     

高分散性SiO2/PMMA复合材料的制备与表征——SiO2在纤维内的分散

将复杂接枝(接枝率为1540.3％)、简单接枝(接枝率为484.4％)和未接枝3种具有不同接枝交联结构的SiO2/聚甲基丙烯酸甲酯(PMMA)复合材料作为无机预分散母料,通过与PMMA树脂的溶液共混,制得一系列PMMA/SiO2/N,N-二甲基甲酰胺(DMF)高分子溶液,再将其应用于静电纺丝制备相应的电纺复合纤维.发现,只有简单接枝复合材料所制共混高分子溶液具有较好的可纺性,且通过纺丝工艺和配方的改变,即可较方便地调控电纺纤维的尺寸和SiO2含量.进一步通过粒度分析(DLS)、扫描电镜(SEM)和透射电镜(TEM)考察SiO2在高分子溶液和电纺复合纤维内的分散状态;通过超声水洗、氢氟酸刻蚀并结合马弗炉锻烧实验,定量评估SiO2在电纺复合纤维体系各部分中的分布情况.结果表明,通过上述简单过程,即可较方便地实现绝大部分简单接枝SiO2在PMMA/DMF高分子溶液和PMMA电纺纤维内初级粒子形式的高度均匀稳定分散.     

Pickering乳液聚合制备核-壳结构PS-SiO2复合微球

用二氯二甲基硅烷对纳米SiO2粒子进行疏水改性,当其表面Zeta电位由-54.8 mV变成-25.8 mV时,SiO2粒子就能在苯乙烯-水界面自组装,形成稳定的Pickering乳液,即以胶体粒子为乳化剂的乳液.利用Pickering乳液聚合制备了以聚苯乙烯(PS)为核、纳米SiO2为壳的PS-SiO2复合微球.用FT-IR、XPS、SEM、偏光显微镜等对复合微球进行了表征.结果表明:复合微球由聚苯乙烯和纳米二氧化硅粒子组成,二氧化硅粒子以单层、六方密排的方式分布在聚苯乙烯微球表面.     

纳米SiO_2粒子锚固偶氮引发剂及接枝聚甲基丙烯酸甲酯

对纳米SiO2 粒子锚固偶氮引发剂 ,进而引发甲基丙烯酸甲酯聚合而制备聚甲基丙烯酸甲酯(PMMA) 纳米SiO2 复合粒子进行了研究 .纳米SiO2 先用环氧型硅烷偶联剂处理 ,再与偶氮二氰基戊酸发生缩合反应而锚固上偶氮引发剂 ,通过差示扫描量热和元素分析证明了引发剂在纳米SiO2 表面的锚固 .通过改性纳米SiO2 存在下MMA的乳液聚合 ,制备得到了接枝率为 2 3 2 %、接枝效率为 36 1%的PMMA 纳米SiO2 复合粒子 .经乳液聚合后 ,纳米SiO2 粒子团聚程度减小 ,在水相中分散稳定 .     

团聚纳米SiO_2在苯乙烯乳液聚合过程中的再分散过程及机理

用二氧化硅 (SiO2 )存在下的乳液聚合法制备了聚苯乙烯 (PSt) 纳米SiO2 复合材料 ,研究了苯乙烯(St)乳液聚合过程中团聚纳米SiO2 的解离与再分散过程及分散的机理 .发现商品纳米SiO2 粒子以团聚体形式存在 ,团聚体大小远超出纳米级范围 .随聚合时间的延长 ,St的转化率逐渐增加 ,而PSt SiO2 复合微胶囊的粒径逐渐减小 ,反应 12 0min后 ,转化率和复合微胶囊粒子的粒径趋于稳定 .透射电镜 (TEM)也显示PSt SiO2 复合微胶囊粒子具有海岛结构 ,而SiO2 粒子的粒径在纳米范围内 ,表明在乳液聚合过程中SiO2 团聚体被逐渐解离 ,并重新分散到纳米尺度 .红外光谱研究发现 ,在乳液聚合过程中 ,除生成PSt均聚物外 ,还在纳米SiO2 表面生成了PSt接枝共聚物 ,改善了无机纳米粒子与聚合物之间的界面相容性 .聚合过程中的反应热和剪切搅拌是团聚体被解离和重新分散的主要原因 ,而生成的聚合物起到隔离作用     

二氧化硅纳米粒子薄膜的制备及光学性能

以二氧化硅胶体和聚二烯丙基二甲基氯化铵(PDDA)为原料,利用静电自组装技术制备了PDDA/SiO2复合薄膜. TEM图象显示,薄膜中的SiO2纳米粒子为密堆积,薄膜均匀、致密;电子衍射实验结果显示,所组装的薄膜为非晶态膜.载玻片表面组装SiO2纳米粒子薄膜后,透射率随薄膜双层数增加呈现周期变化.薄膜具有增透作用,载玻片双面组装薄膜后在一定波长范围内的透射率可提高5％以上. PDDA/SiO2复合薄膜的光学性质主要由SiO2纳米粒子决定,每一双层的平均物理厚度小于SiO2纳米粒子的粒径,薄膜中存在层间穿插现象,逐层组装的复合薄膜具有单层光学薄膜的特性.     

Chitosan/Fe3O4/SiO2复合纳米粒子的制备及催化特性研究

功能型复合纳米材料的设计与合成具有重要的意义.基于反相微乳液法,合成了Chitosan/Fe3O4/SiO2复合纳米粒子,并应用TEM、磁滞回线、SEM能谱、XRD和zeta电位等方法表征了复合纳米粒子.此外,还研究了复合纳米粒子的电化学发光催化特性,研究结果显示:包埋于SiO2壳层中的Fe3O4可基于复合于其中的Chitosan凝胶所提供的纳米通道,而展现出一定的催化过氧化氢氧化鲁米诺的特性.     

聚丙烯酸丁酯接枝的纳米SiO2对聚甲醛的改性

采用原子转移自由基聚合法(ATRP)在纳米SiO2粒子表面接枝聚丙烯酸丁酯(PBA)制备了纳米复合粒子SiO2-g-PBA,并以此对聚甲醛(POM)进行改性. 通过红外光谱、热失重分析、透射电子显微镜及扫描电子显微镜等分析技术进行了表征. 结果,SiO2-g-PBA在POM中分散均匀,使POM/SiO2-g-PBA复合材料的缺口冲击强度明显高于POM及POM/ SiO2复合材料. 当SiO2-g-PBA纳米复合粒子的质量分数为2%时,POM/SiO2-g-PBA复合材料的冲击强度达71.2 kJ/m2,较纯POM提高了7倍多,同时拉伸强度也有一定的提高,达到68.1 MPa.     

甲基丙烯酸甲酯/纳米SiO_2粒子分散液的细乳化和细乳液聚合

对包含纳米SiO2粒子的甲基丙烯酸甲酯(MMA)的细乳化和细乳液聚合行为进行了研究.发现在超声细乳化过程中,90%以上的分散于MMA相的纳米SiO2粒子将从油相逃逸到水相.采用甲基丙烯酸3-(三甲氧基甲硅烷基)丙酯(MPS)偶联剂处理SiO2粒子,可以增加其表面亲油性,抑止这种逃逸,经测定几乎全部SiO2粒子在超声细乳化后仍稳定停留在细乳化亚微液滴中.通过进一步细乳液聚合,得到了分散稳定、界面清晰的包裹有纳米SiO2粒子的聚甲基丙烯酸甲酯复合粒子乳液.     

纳米SiO2改性超高分子量聚乙烯纤维的制备及其结构性能研究

采用萃取阶段加入纳米粒子的方式,制得纳米SiO2改性的超高分子量聚乙烯(UHMWPE)纤维.借助于扫描电镜、声速法、WAXD、DSC、TMA和强力测试等手段,研究了纳米SiO2对UHMWPE纤维结构和性能的影响.结果表明,纳米SiO2粒子在UHMWPE纤维中可达到均匀分散,分散尺寸约为50～100nm;改性后纤维取向度、结晶度基本不变,纤维横向晶粒尺寸大大降低,纤维力学强度稍有增加,力学模量大大增加(由1359.2cNdtex增加到1505.9cNdtex),同时,纤维热性能和热力学性能也得到大大改善.     

Highly effective sulfated zirconia nanocatalysts grown out of colloidal silica at high temperature

A large surface-to-volume ratio is a prerequisite for highly effective catalysts. Making catalysts in the form of nanoparticles provides a good way to achieve the aim. However, agglomeration of nanoparticles during the preparation and utilization of nanocatalysts remains a formidable problem. Here, we present a novel approach in which nano units of catalysts are formed in the matrix of a colloidal carrier, with assistance of a cross-linking agent, and then grow out of the carrier upon calcination at high temperature. This ensures that the catalysts not only do not agglomerate, but also have a low cost and high catalytic efficiency due to the large surface-to-volume ratio and the absence of carbon deposition. The technique is demonstrated by the successful preparation of a binary nanocatalyst that consists of a silica nanoparticle core and a sulfated zirconia (SZ) nanocrystal shell (JML-1). The synthesis was achieved by converting sulfated zirconia (SZ) and silica solutions into a composite gel by means of sol-gel processing in the presence of triethoxysilane as the cross-linking agent, followed by heating at 50 degrees C and calcining at 550 degrees C. Relative to other catalysts, such as pure SZ, non-nanodispersed SZ over silica (SZ/SiO2), and zeolites Y, Beta, and ZSM-5, JML-1 exhibits superior catalytic activity in many reactions. For example, the activity of JML-1 in the production of gasoline by alkylation of 1-butene with isobutene remained at 95% or higher after 20 h of reaction and was over 90% after being regenerated five times. In sharp contrast, SZ and SZ/SiO2 give a high activity only for 2 h and the initial activity of zeolites Beta and ZSM-5 are about 88 and 60%, respectively. These findings demonstrate that non-agglomerated nanoparticles anchored onto a carrier surface can be prepared and the technique provides a versatile route to new highly effective nanocatalyst systems.     

同轴静电纺丝法在纳米中空TiO2纤维中填充Ag的应用

以聚乙烯吡咯烷酮(PVP)溶胶/钛酸四正丁酯和PVP溶胶/银颗粒为前驱体, 以共轴静电纺丝法制备了银填充的TiO2中空纳米纤维. 将双组分纤维在200 ℃下热处理去除乙醇与表面吸附水后, 继而在空气气氛中焙烧至600 ℃, 可以得到在内表面上沉积银颗粒的TiO2纳米管, 银颗粒的直径为5-40 nm, TiO2纳米管的外径150-300 nm, 管臂厚10-20 nm. 用红外吸收光谱(IR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等测试手段对超细纤维进行了表征. 中空纤维的直径和管壁可以通过改变电纺参数来调节. 与Ag-TiO2纳米纤维、TiO2纳米中空纤维、TiO2纳米纤维及TiO2纳米粉体相比较, Ag颗粒填充的TiO2纳米中空纤维在光分解亚甲基蓝上表现出了更好的光催化性能.     

同轴静电纺丝法在纳米中空Ti02纤维中填充Ag的应用

以聚乙烯吡咯烷酮(PVP)溶胶,钛酸四正丁酯和PVP溶胶,银颗粒为前驱体,以共轴静电纺丝法制备了银填充的TiO2中空纳米纤维.将双组分纤维在200℃下热处理去除乙醇与表面吸附水后,继而在空气气氛中焙烧至600℃.可以得到在内表面上沉积银颗粒的TiO2纳米管,银颗粒的直径为5-40 nm,TiO2纳米管的外径150-300 nm.管臂厚10-20 nm.用红外吸收光谱(IR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等测试手段对超细纤维进行了表征.中空纤维的直径和管壁可以通过改变电纺参数来调节.与Ag-TiO2纳米纤维、TiO2纳米中空纤维、TiO2纳米纤维及TiO2纳米粉体相比较,Ag颗粒填充的TiO2纳米中空纤维在光分解亚甲基蓝上表现出了更好的光催化性能.     

LiCoO2 Hollow Nanofibers by Co‐Electrospinning Sol‐Gel Precursor

LiCoO₂ xerogel hollow nanofibers were first prepared by co‐electrospinning the sol precursor, and the polycrystalline LiCoO₂ hollow nanofibers were obtained after calcination of the xerogel fibers. The obtained hollow nanofibers made up of 20～30 nm nanocrystals were about 100 nm to several micrometers in outer diameter. The hollow nanofibers were detected by means of SEM, TEM, TG, DSC, FTIR, and XRD techniques.     

Mesoporous TiO2/SiO2 composite nanofibers with selective photocatalytic properties

Mesoporous TiO2/SiO2 composite nanofibers with a diameter of 100-200 nm and silica shell thickness of 5-50 nm have been fabricated by a sol-gel combined two-capillary co-electrospinning method; the composite nanofibers exhibited selective photocatalytic activity based on the decomposition of Methylene Blue, Active Yellow and Disperse Red.     

Preparation of nearly monodisperse multiply coated submicrospheres with a high refractive index

Nearly monodisperse SiO2/TiO2/SiO2 multiply coated submicrospheres with nearly monodisperse silica submicrospheres as cores, thick titania layers, and thin silica skin were prepared to increase the refractive index of complex submicrospheres while keeping their near monodispersity and perfect surface properties. Nearly monodisperse colloidal silica submicrospheres as cores with a diameter of 200 nm were synthesized by a seeding technique on the basis of the hydrolysis of tetraethyl orthosilicate (TEOS) in an aqueous ethanol solution with ammonia as catalyst. On the basis of the hydrolysis of tetrabutyl orthotitanate, a procedure combining continuous feeding with multistep coating was determined to prepare titania coatings about 40 nm thick and increase the refractive index of the complex submicrospheres. The hydrolysis of TEOS was still used to get the outmost silica coating about 10 nm thick on titania coated silica submicrospheres to eliminate random aggregation caused by the TiO2 surface properties of the TiO2/SiO2 complex submicrospheres during the final fabrication of photonic crystals.     

Synthesis of Methyl Glycolate by Hydrogenation of Dimethyl Oxalate over Cu-Ag/SiO2 Catalyst

Methyl glycolate is a good solvent and can be used as feedstock for the synthesis of some important organic chemicals. Catalytic hydrogenation of dimethyl oxalate (DMO) over copper-silver catalyst supported on silica was studied. The Cu-Ag/SiO2 catalyst supported on silica sol was prepared by homogeneous deposition-precipitation of the mixture of aqueous cuprammonia complex and silica sol. The proper active temperature of Cu-Ag/SiO2 catalyst for hydrogenation of DMO was 523—623 K. The most preferable reaction conditions for methyl glycolate (MG) were optimized: temperature at 468—478 K, 40—60 mesh catalyst diameter, H2/DMO ratio 40, and 1.0 h-1 of LHSV.     

Electrospinning Synthesis and Photoluminescence Properties of SnO2：xEu3＋ Nanofibers

NnO2：xEu3＋（x=O, 1%, 3%, 5%, molar fraction） fibers were synthesized by electrospinning technology. The size of the as-prepared fibers is relatively uniform and the average diameter is about 200 nm with a large draw ratio. The as-prepared Eu3＋ doped SnO2 nanofibers have a rutile structure and consist of crystallitc grains with an average size of about 10 nm. A slight red shift of the A1gand Bag vibration modes and an additional peak at 288 nm were observed in the Raman spectra of the nanofibers. The energies of bandgaps of the SnO2 nanofiber with Eu doping of 1% and 3% are 2.64 eV, and the energy of bandgap is 2.94 eV with Eu doping of 5%（molar fraction）. There is only orange emission（5D0→7F1 magnetic dipole transition） for Eu doped SnO2 nanofibers, and no red emission could be observed. The orange emission upon indirect excitation splits into three peaks and the peak intensity at the excitation wavelength of 275 nm is higher than that at the excitation wavelength of 488 nm.     

电纺丝-气相沉积法制备碳包覆TiO_2纳米纤维及其光催化行为的研究

以聚乙烯吡咯烷酮(PVP)溶胶/钛酸正丁酯为前躯体,以静电纺丝法制备了PVP/Ti(OC4H9)4纤维。550℃下,空气氛中焙烧双组分纤维,得到直径60～300nm的TiO2纳米纤维。继而以气相沉积法制得碳包覆TiO2纳米纤维。用红外吸收光谱(FTIR)、X射线衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)等对纳米纤维进行了表征。与TiO2纳米纤维、TiO2纳米粉体相比,气相沉积法制备的碳包覆TiO2纳米纤维在光分解亚甲基蓝上表现出更好的催化性能。     

Preparation of ZnFe2O4 Nanofibers by Sol‐Gel Related Electrospinning Method

Zinc ferrite gel fibers were prepared from the sol precursor by the electrospinning method, and the ZnFe₂O₄ polycrystalline nanofibers were obtained upon calcination of the gel fibers. The obtained ZnFe₂O₄ nanofibers composed of 20–30 nm nanocrystals were about one hundred to several hundred nanometers in diameter. The materials have been characterized by means of SEM, TEM, XRD, TGA, and IR techniques.