Elevation of modulus and elongation of semicrystalline polyurethanes

Polyurethanes were synthesized based on an amorphous polyester polyol, and different chain extenders, comparing the universally accepted symmetric chain extender (1,4‐butanediol) with an asymmetric (1,2‐propanediol) chain extender. The effect of incorporating a crystalline polyester polyol polyhexamethylene adipate (PHMA) was investigated. The resulting morphologies and tensile properties are dramatically different. Based on the thermal and infrared data obtained, the sample with the symmetric chain extender exhibits a phase‐separated morphology, which can change as a function of time and temperature. Conversely, the polyurethane with the asymmetric chain extender has a phase mixed morphology that remains stable under the same experimental conditions. Incorporating crystalline PHMA resulted in a substantial change in the mechanical properties of the materials, especially for the copolymer comprising asymmetric chain extender. The rate of crystallization and the degree of crystallization achieved depended on the type of chain extender used. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018     

Synthesis,structural characterization,and properties of polyurethane elastomers containing various degrees of unsaturation in the chain extenders

We prepared polyurethane block copolymers with both 50 and 70% soft segment concentrations, using 4,4′‐diphenylmethane diisocyanate–poly(propylene glycol) prepolymer and 1,4‐butanediol, cis‐2‐butene‐1,4‐diol, and 2‐butyne‐1,4‐diol as chain extenders. The effects of the different chain extenders were observed during synthesis and in the final products. A comparison of spectroscopic, mechanical, and thermal data reveals that polymer properties can be significantly altered by differences in chemical bonding within the chain extender backbone. Although all data support the expected differences in phase morphology between the two series of samples, they also suggest that increasing chain extender unsaturation reduced reactivity with isocyanate, adversely affected hydrogen bonding, lowered the degree of crystallinity of the hard segments, and decreased phase separation. The tensile strength, elongation, modulus, and elastic recovery decreased and the electrical conductivity of iodine‐doped samples increased with increasing chain extender unsaturation. The thermal stability of the urethane group was also lower in samples with increased unsaturation. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1316–1333, 2002     

Studies on organogelation of self assembling bis urea type low molecular weight molecules

A novel class of toluene based bis urea compounds carrying linear fatty acid units and semicarbazide linkages has been synthesised. The compounds were exhibiting thermoreversible gelation at concentrations below 10 mg/mL in common organic solvents, both aliphatic and aromatic. The effect of the chain length variation of fatty acid units on gelation properties like gelation concentration, gelation time and gel melting temperatures were studied. Choosing a particular gelator of fixed chain length and a specific solvent, the effect of the concentration on the gelation properties were studied. The thermal studies using DSC revealed the presence of phase transitions corresponding to the premelting and melting of the gels during the heating cycle. The morphology of the xerogels studied using SEM revealed a three dimensional network structure while the WAXS studies showed no crystallinity in the xerogels. IR spectra of the gels (solvent subtracted) and solutions in the corresponding solvent showed that a high degree of inter-molecular H bonding exists and absorptions corresponding to NH stretching shifted to lower wave numbers. Thus simple bisurea type of compounds exhibiting gelation ability in a wide range of solvents can be used for making functional gels for various applications.     

PHYSICO-MECHANICAL,OPTICAL, AND WAXS STUDIES ON CHAIN EXTENDED POLYURETHANE

Thermoset polyurethane (PU) elastomers were prepared using castor oil, 4,4′-methylenebis(phenyl isocyanate) (MDI), and tol-uene-2,4-diisocyanate (TDI). The effect of aromatic diamines on the physico-mechanical and optical properties of chain extended polyurethane prepared using castor oil has been investigated. Tensile strength and percent elongation lies in the range 13–24 MPa and 76–32, respectively. Higher tensile strength was observed for 4,4′-diaminodiphenylsulphone (DDS) than the 4,4′-diaminodiphenylmethane (DDM) chain extender. The properties imparted by the extenders are explained on the basis of the groups present in the diamines. These changes have been interpreted quantitatively in terms of microcrystalline parameters computed using wide-angle X-ray scattering data.     

双噁唑啉扩链尼龙1010

对尼龙 10 10的加成型化学扩链做了系统的研究 ,并对 2 ,2′ 双 (2 唑啉 ) (BOZ)和 1,4 双 (2 唑啉基 )苯 (PBO)的偶联效果和扩链产物的性能做了详细的探讨 ,前者的扩链效果较好 .研究结果表明 ,尼龙10 10熔体的转矩随着反应时间的延长显著增加 .但转矩达到极大值后开始缓慢下降 ,表明扩链产物在高温条件下发生热降解 .扩链剂的用量存在最佳值 ,用量不足时偶联反应不充分 ,用量过量时封端反应加剧 .扩链以后尼龙 10 10的端羧基含量大大降低 ,反应温度对反应速率的影响符合阿累尼乌斯关系式 .扩链产物极限粘度大大高于尼龙原料 ,表明分子量显著提高     

丁羟胶型聚氨酯弹性体的水解稳定性

丁羟胶型聚氨酯弹性体的水解稳定性;弹性体;扩链剂     

聚偏氟乙烯凝胶电解质组成间相互作用及其凝胶化研究

通过冷却聚偏氟乙烯 (PVDF) 丙烯碳酸酯 (PC)或PVDF PC LiClO4的溶液 ,制备了数个聚合物凝胶 .实验表明 ,聚合物凝胶的凝胶化时间 (tgel)与凝胶温度、聚合物浓度有关 ,且强烈地依赖于体系中盐的浓度 ,因为盐会缩短体系的tgel.凝胶体系中LiClO4的存在提高了其凝胶熔融温度 (Tgm) ,LiClO4的含量越大 ,相应凝胶的Tgm 越高 .用DSC和落球法所测凝胶的Tgm 有较大的差别 .这说明凝胶中可能存在热稳定性好和热稳定性相对较差的两种不同结构部分 .FT IR的研究结果表明 ,凝胶电解质的各组成 (LiClO4,PC和PVDF)间存在较强的相互作用 .对含盐和不含盐的两类凝胶体系的对比研究表明 ,两者不同的凝胶化现象和Tgm 归因于盐与聚合物或溶剂间的络合作用     

Synthesis and properties of a monolithic gradient polymer material based on polyurethane structures and 1,4-butanediol as a chain extender

Conditions of preparing monolithic gradient polymeric materials based on aliphatic polyether Laprol 5003 (Voranol 4711), 2,4-tolylene diisocyanate, and 1,4-butanediol as a chain extender have been studied. The materials have been synthesized on a semiautomatic lab molding machine that makes it possible to control the feed rate of precursors; therefore, the chemical structure of the material may be changed in the desired direction. As a consequence, the elastic modulus of the material changes along the sample length from 19 to 410 MPa; that is, the gradual transition from a low-modulus plastic to a rigid rubber occurs. The introduction of 1,4-butanediol improves the viability of precursors and thus hampers the occurrence of premature gelation and creates wide possibilities for obtaining both monolithic and composite reinforced gradient polymeric materials.     

偏蓝相干法聚氨酯合成革的制备工艺

本文研究了溶剂型聚氨酯在合成革中的展色性能,以4,4-二苯基甲烷二苯基甲烷二异氰酸酯、己二酸、乙二醇、1,4-丁二醇、甲基丙二醇、N,N-二甲基甲酰胺及乙酸乙酯为主要原料。考察了多元醇组成、扩链剂种类及溶剂组成等因素对干法聚氨酯合成革展色性影响规律。结果表明,当己二酸系聚酯二元醇中乙二醇与1,4-丁二醇的摩尔比为1∶1时、所用扩链剂组成为乙二醇与甲基丙二醇的摩尔比为1∶0.5,所使用的溶剂中N,N-二甲基甲酰胺与乙酸乙酯的质量比为2∶1时,制备得到的干法聚氨酯合成革的展色性能最佳(偏蓝相)。     

Agarose Sols and Gels Revisited

Agarose sols have been seen for long as solutions of flexible chains that, on cooling, produce thermoreversible gels through double-helix formation. Investigations of the chain conformation in the sol state by small-angle neutron scattering reveals instead a rigid chain with a very large persistence length (l_p > 9 nm). The chain cross-section radius and mass per unit length correspond to characteristics of helices as those described by Foord and Atkins. These results lead one to a reappraisal of the occurrence of double helices in the gelation process, as they rather suggest a transition of the type loose-single helix⇒tight single helix. Studies of gels from agarose/water/cosolvent where the cosolvent is Dimethyl Sulfoxide (DMSO), Dimethyl Formamide (DMF), and Methyl Formamide (MF) have led one to conclude on the formation of agarose/water/ cosolvent ternary complexes. The contrast variation method by neutron scattering gives further support to this assumption. Finally, determination of the gel nanostructure allows one to account for the two regimes observed for the variation of the elastic modulus vs concentration.     

Investigation of covalently colored polyurethane latexes based on novel anthraquinone polyurethane chain extenders

Novel red and yellow polyurethane (PU) chain extenders with one anthraquinone chromophore and two hydroxyls were synthesized, and then used to fabricate covalently colored PU latexes with pendent chromophores on the PU backbone. The chemical structures of the chain extenders were characterized by ¹H-NMR and FTIR, and the properties of PU latexes and their films were investigated by UV-Vis absorption spectra, particle size analysis, FTIR, Soxhlet's extraction and xenon arc aging testing. Results showed that the covalently colored PUs had the same UV-Vis absorption behavior as the corresponding chain extenders, and amount of the chain extenders had no obvious influence on the latex preparation process and the resulted latex colloidal properties. Compared with the corresponding non-covalently colored PU latex films, both the light fastness and the solvent fastness of the covalently colored PU latex films were significantly enhanced by the covalent incorporation of chromophores with PU matrix.     

Multistimuli‐Responsive Supramolecular Organogels Formed by Low‐Molecular‐Weight Peptides Bearing Side‐Chain Azobenzene Moieties

This work demonstrates that the incorporation of azobenzene residues into the side chain of low‐molecular‐weight peptides can modulate their self‐assembly process in organic solvents leading to the formation of stimuli responsive physical organogels. The major driving forces for the gelation process are hydrogen bonding and π–π interactions, which can be triggered either by thermal or ultrasound external stimuli, affording materials having virtually the same properties. In addition, a predictive model for gelation of polar protic solvent was developed by using Kamlet–Taft solvent parameters and experimental data. The obtained viscoelastic materials exhibited interconnected multistimuli responsive behaviors including thermal‐, photo‐, chemo‐ and mechanical responses. All of them displayed thermoreversability with gel‐to‐sol transition temperatures established between 33–80 °C and gelation times from minutes to several hours. Structure–property relationship studies of a designed peptide library have demonstrated that the presence and position of the azobenzene residue can be operated as a versatile regulator to reduce the critical gelation concentration and enhance both the thermal stability and mechanical strength of the gels, as demonstrated by comparative dynamic rheology. The presence of N‐Boc protecting group in the peptides showed also a remarkable effect on the formation and properties of the gels. Despite numerous examples of peptide‐based gelators known in the literature, this is the first time in which low‐molecular‐weight peptides bearing side chain azobenzene units are used for the synthesis of “intelligent” supramolecular organogels. Compared with other approaches, this strategy is advantageous in terms of structural flexibility since it is compatible with a free, unprotected amino terminus and allows placement of the chromophore at any position of the peptide sequence.     

Thioether functional chain extender for thermoplastic polyurethanes

In this study, a novel three functional chain extender(TATATRIOL) was synthesized from the reaction of 1,3,5-tri(prop-2-en-1-yl)-1,3,5-triazinane-2,4,6-trione(TATA) with 2-sulfanylethanol. Then new thermoplastic polyurethanes(TPUs) were synthesized by a one-step bulk polymerization from the reaction of 1,1'-methanediylbis(4-isocyanatocyclohexane)(H12MDI), a poly(ethylene adipate) based polyester polyol and a chain extender. Butane-1,4-diol(BD) and the newly synthesized monomer, TATATRIOL, were used as chain extenders. The effects of TATATRIOL on the properties of the TPU were investigated and compared to those of the TPU prepared with BD. The TPUs which derived from the sulfur containing chain extender displayed lower modulus and high elongation at break values than the analogous TPUs derived from BD. Moreover sulfur containing TPUs exhibited higher thermal stability.     

Microstructure and properties of polyurethanes derived from castor oil

The goal of this work was the synthesis of novel segmented polyurethanes with a high percentage of components derived from renewable sources. The soft segment was a polyol derived from castor oil and the hard segment structure was varied by means of different chain extenders, petrochemical-based 1,4-butanediol (BD) and corn sugar-based 1,3-propanediol (PD). The synthesis was carried out in bulk and without catalyst via a two-step polymerization varying hard segment ratio. Physico-chemical, mechanical and morphological characterization was performed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), atomic force microscopy (AFM), mechanical testing and termogravimetric analysis (TGA). Properties have been discussed from the viewpoint of hard/soft microdomain phase separation and also the hard segment nature and formed structure. An increase in hard segment content was accompanied by an increase in hard domain order, crystallinity, and stiffness. The hard segment structures, in addition to the elastic nature of soft segment, provide enough physical crosslink sites to impart properties ranging from elastomeric to rigid behaviour with the increase of hard segment content. Polyurethanes synthesized from bio-based chain extender showed a slightly lower crystallinity in the hard segment structure than that synthesized from BD as the chain extender. This lower crystallinity avoids strength concentrations at the soft/crystalline hard segment interface, thus improving the mechanical properties at high hard segment content. The slightly higher thermal stability observed for BD based polyurethanes is related with their more packed structures and crystallinity observed in the hard segment structure.     

Incorporation of silica nanoparticles and polyurethane into hybrid composites for increase of char residue

Journal of Thermal Analysis and Calorimetry - Effect of different chain extenders, silica nanoparticle loading, and using sol–gel method on the thermal properties of polyurethane (PU) hybrid...     

Spontaneous formation of gel emulsions in organic solvents and commercial fuels induced by a novel class of amino acid derivatized surfactants

A novel class of amphiphiles, sodium N-(n-dodecyl-2-aminoethanoyl)-l-amino acidate, have been synthesized. These amphiphiles have been shown to form oil-in-water-type gel emulsions with a high internal-phase ratio in organic solvents as well as in commercial fuels simply by agitation. No heating and cooling cycle was required for the formation of gels. The amphiphiles also showed efficient phase-selective gelation in the presence of excess water. The minimum gelator concentrations for the amphiphiles in the solvents employed have been determined. The effects of the chain length of the hydrocarbon tail and the chirality of a representative amphiphile on its ability to promote gelation in a given organic solvent have been investigated. Also, the effect of acid and alkali on the gelation has been examined. The optical microscopic picture of the gel emulsion showed foamlike structures with oil compartments separated by the continuous aqueous phase. The mechanism of the formation of gel emulsions has been discussed.     

The effects of solvent chemistry on the impedance of aged gels

Sols were prepared in the system TMOS:H₂O:SOLV:HCl with molar ratios of 1:4:3:0.0005 for SOLV = MEOH and DMF. The sols were cast into cuvettes and covered with parafilm during gelation and aging. The bulk resistance of aged samples was determined by impedance spectroscopy at room temperature. The use of different solvents in the synthesis of silica gels leads to considerable variation in bulk resistance. The results of solvent exchange were found to depend greatly upon the nature of the solvent.     

A structural reconsideration: Linear aliphatic or alicyclic hard segments for biodegradable thermoplastic polyurethanes?

Thermoplastic polyurethane elastomers (TPUs) with a biodegradable chain extender and different nonaromatic diisocyanate hard segments were synthesized and tested concerning their thermal, mechanical, and degradation properties and for their processability regarding electrospinning. The design of the TPUs was based on the structural modification of the hard segment using linear aliphatic hexamethylene diisocyanate (HMDI), more rigid alicyclic 4,4′-methylene bis(cyclohexylisocyanate) (H12MDI), 1,3-bis(isocyanatomethyl)cyclohexane (BIMC), or isophorone diisocyanate (IPDI). The soft segment consisted of poly(tetrahydrofuran). Bis(2-hydroxyethyl) terephthalate (BET) was used as chain extender with cleavable ester bonds. Some of the polyurethanes based on alicyclic diisocyanate showed better mechanical performance than the less rigid HMDI-based TPU. The TPU in vitro degradability was tested for 25 days at elevated temperatures in PBS buffer and indicated a bulk erosion process. Electrospinning experiments were conducted and promising results with respect to further applicability of these materials in vascular tissue engineering were obtained. © 2018 The Authors Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2214–2224     

Hard‐block degradable thermoplastic urethane‐elastomers for electrospun vascular prostheses

Thermoplastic polyurethane (TPU) elastomers with biodegradable chain extenders were synthesized and tested for mechanical performance and biocompatibility. The design of the TPUs was based on structural modification of a mechanically appropriate aromatic isocyanate‐based TPU. As the aromatic isocyanate was substituted with a less toxic but also less “hard” aliphatic isocyanate, the chain extender plays an important role on the mechanical properties. Here, the terephthalate ester chain extender was found to work better than hydroxyl ethyl lactate in providing polymers with mechanical properties similar to commercial aromatic isocyanate‐based TPUs. The polymers were degraded in aqueous solutions at elevated temperatures and compared to polylactic acid (PLA) to partially simulate biodegradation. The lactate‐based TPUs degraded about twice as fast as PLA while the terephthalate‐based TPU degraded much more slowly. The latter material was processed by electrospinning to give a tubular graft approximately the size of a large rat blood vessel. Initial results from implantation of these TPUs into rats are promising and indicate that biodegradation occurs and is likely beneficial to cell proliferation. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

光响应偶氮苯类小分子凝胶因子的合成及性能

合成了3个系列各6类的偶氮苯衍生物1a~6a, 1b~6b和1c~6c. 凝胶性能测试结果表明, 这些化合物均能在多种极性或非极性有机溶剂中形成凝胶. 运用扫描电子显微镜和核磁共振波谱仪对代表性化合物4b形成的凝胶结构和成胶驱动力进行了分析. 化合物4a~4c形成的凝胶在紫外光和可见光照射下, 能够发生凝胶-溶胶的相互转化. 计算了溶剂和凝胶因子的梯氏参数, 利用梯氏三角图分析了凝胶测试结果, 发现凝胶因子在溶剂中的4种行为(溶液、 半凝胶、 凝胶和沉淀)分别分布在三角图的不同区域; 在凝胶区域, 溶剂与凝胶因子之间的距离反映了凝胶的热稳定性, 距离越远表示凝胶的热稳定性越好.