Microbial synthesis of silver nanoparticles by Bacillus sp.

A silver resistant Bacillus sp. was isolated through exposure of an aqueous AgNO₃ solution to the atmosphere. Silver nanoparticles were synthesized using these airborne bacteria (Bacillus sp.). Transmission electron microscopy (TEM) and energy dispersive X-ray (EDX) analyses confirmed that silver nanoparticles of 5–15 nm in size were deposited in the periplasmic space of the bacterial cells; a preferable cell surface location for the easy recovery of biogenic nanoparticles.     

Methoxycarbonyl-terminated hyperbranched poly(amine-ester) as templates for synthesis of silver nanoparticles

Highly stable and spherical silver nanoparticles, stabilized by methoxycarbonyl-terminated hyperbranched poly(amine-ester) (HPAE-COOCH₃), were synthesized in water with reducing AgNO₃/HPAE-COOCH₃ using two methods, viz. NaBH₄ and ultraviolet irradiation. HPAE-COOCH₃ was found to play a key role in the formation of nanoparticles. UV–visible absorption, Transmission electron microscopic (TEM), and Fourier transform infrared spectroscopy (FT-IR) had been used to study the structure and characterization of the silver nanoparticles. The absorption peaks of the silver nanoparticles appear at ~420 nm in UV–visible absorption spectra; average particle size reduced by NaBH₄ is ~30 nm, which is ~10 and ~15 nm, respectively, when ultraviolet irradiation time is 12 and 24 h. FT-IR spectra confirm that there is strong interaction between silver nanoparticles and HPAE-COOCH₃. And silver nanoparticles/HPAE-COOCH₃ aqueous solution can keep stable for more than 3 months.     

Rapid extra-/intracellular biosynthesis of gold nanoparticles by the fungus <Emphasis Type="Italic">Penicillium</Emphasis> sp.

In this work, the fungus Penicillium was used for rapid extra-/intracellular biosynthesis of gold nanoparticles. AuCl₄ ⁻ ions reacted with the cell filtrate of Penicillium sp. resulting in extracellular biosynthesis of gold nanoparticles within 1 min. Intracellular biosynthesis of gold nanoparticles was obtained by incubating AuCl₄ ⁻ solution with fungal biomass for 8 h. The gold nanoparticles were characterized by means of visual observation, UV–Vis absorption spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX). The extracellular nanoparticles exhibited maximum absorbance at 545 nm in UV–Vis spectroscopy. The XRD spectrum showed Bragg reflections corresponding to the gold nanocrystals. TEM exhibited the formed spherical gold nanoparticles in the size range from 30 to 50 nm with an average size of 45 nm. SEM and TEM revealed that the intracellular gold nanoparticles were well dispersed on the cell wall and within the cell, and they are mostly spherical in shape with an average diameter of 50 nm. The presence of gold was confirmed by EDX analysis.     

Photocatalytic activity of ZnO nanoparticles prepared via submerged arc discharge method

ZnO nanostructures were synthesized through arc discharge of zinc electrodes in deionized (DI) water. X-ray diffraction (XRD) analysis of the prepared nanostructures indicates formation of crystalline ZnO of hexagonal lattice structures. Transmission electron microscopy (TEM) images illustrate rod-like as well as semi spherical ZnO nanoparticles with 15–20 nm diameter range, which were formed during the discharge process with 5 A arc current. The average particle size was found to increase with the increasing arc current. X-ray photoelectron spectroscopy (XPS) analysis confirms formation of ZnO at the surface of the nanoparticles. Surface area of the sample prepared at 5 A arc current, measured by BET analysis, was 34 m²/g. Photodegradation of Rhodamine B (Rh. B) shows that the prepared samples at lower currents have a higher photocatalytic activity due to larger surface area and smaller particle size.     

Phyllanthin-assisted biosynthesis of silver and gold nanoparticles: a novel biological approach

Abstract  The anisotropic gold and spherical–quasi-spherical silver nanoparticles (NPs) were synthesized by reducing aqueous chloroauric acid (HAuCl₄) and silver nitrate (AgNO₃) solution with the extract of phyllanthin at room temperature. The rate of reduction of HAuCl₄ is greater than the AgNO₃ at constant amount of phyllanthin extract. The size and shape of the NPs can be controlled by varying the concentration of phyllanthin extract and thereby to tune their optical properties in the near-infrared region of the electromagnetic spectrum. The case of low concentration of extract with HAuCl₄ offers slow reduction rate along with the aid of electron-donating group containing extract leads to formation of hexagonal- or triangular-shaped gold NPs. Transmission electron microscopy (TEM) analysis revealed that the shape changes on the gold NPs from hexagonal to spherical particles with increasing initial concentration of phyllanthin extract. The Fourier transform infrared spectroscopy and thermogravimetric analyses reveal that the interaction between NPs and phyllanthin extract. The cyclic voltammograms of silver and gold NPs confirms the conversion of higher oxidation state to zero oxidation state. Graphical abstract  Anisotropic gold and silver nanoparticles were synthesized by a simple procedure using phyllanthin extract as reducing agent. The rate of bioreduction of AgNO₃ is lower than the HAuCl₄ at constant concentration of phyllanthin extract. The required size of the nanoparticles can be prepared by varying the concentration of phyllanthin with AgNO₃ and HAuCl₄.      

UV-induced synthesis,characterization and formation mechanism of silver nanoparticles in alkalic carboxymethylated chitosan solution

The silver nanoparticles (AgNPs) were synthesized in an alkalic aqueous solution of silver nitrate (AgNO₃)/carboxymethylated chitosan (CMCTS) with ultraviolet (UV) light irradiation. CMCTS, a water-soluble and biocompatible chitosan derivative, served simultaneously as a reducing agent for silver cation and a stabilizing agent for AgNPs in this method. UV–vis spectra and transmission electron microscopy (TEM) images analyses showed that the pH of AgNO₃/CMCTS aqueous solutions, the concentrations of AgNO₃ and CMCTS can affect on the size, amount of synthesized AgNPs. Further by polarized optical microscopy it was found that the CMCTS with a high molecular weight leads to a branch-like AgNPs/CMCTS composite morphology. The diameter range of the AgNPs was 2–8 nm and they can be dispersed stably in the alkalic CMCTS solution for more than 6 months. XRD pattern indicated that the AgNPs has cubic crystal structure. The spectra of laser photolysis of AgNO₃/CMCTS aqueous solutions identified the early reduction processes of silver cations (Ag⁺) by hydrated electron formed by photoionization of CMCTS. The rate constant of corresponding reduction reaction was 5.0 × 10⁹ M⁻¹ s⁻¹.     

Antifungal effects of 3D scaffold type gelatin/Ag nanoparticles biocomposite prepared by solution plasma processing

The 3D scaffold type biocomposites of gelatin/silver nanoparticles were prepared through the silver nanoparticles (Ag NPs) formation in gelatin solution using solution plasma process (SPP) and their antifungal activity was evaluated. The mixture of 3% gelatin solution and silver precursor (AgNO₃; 1–10 mM) was subject to discharge at high voltage (1600 V) under the controlled conditions to form the suspension of Ag NPs in the gelatin matrix. The freeze-drying process of lyophilization was employed to fabricate the 3D scaffold type biocomposite of gelatin/Ag NPs from the suspension. The water-insoluble property was improved by cross-linking using UV-irradiation (λ = 254 nm for 15 min). The physical and chemical characteristics of the biocomposite were investigated using UV–vis spectroscopy, EDS, FE-SEM, and TEM. The results indicated that the 3D scaffold biocomposite of gelatin/Ag NPs had spherical shape with approximately 11–12 nm of diameter. The antifungal activity analysis suggested that the biocomposite with Ag NPs could inhibit the growth of Candida albicans as well as that of hyphae and spores of Aspergillus parasiticus significantly. MIC of the biocomposite for C. albicans and A. parasiticus was determined as 80 μg/ml and 240 μg/ml of Ag NPs, respectively. The growth inhibition of 92.8% was observed in the biocomposite with 10 mM Ag against C. albicans.     

Highly bacterial resistant silver nanoparticles: synthesis and antibacterial activities

In this article, we describe a simple one-pot rapid synthesis route to produce uniform silver nanoparticles by thermal reduction of AgNO₃ using oleylamine as reducing and capping agent. To enhance the dispersal ability of as-synthesized hydrophobic silver nanoparticles in water, while maintaining their unique properties, a facile phase transfer mechanism has been developed using biocompatible block co-polymer pluronic F-127. Formation of silver nanoparticles is confirmed by X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV–vis spectroscopy. Hydrodynamic size and its distribution are obtained from dynamic light scattering (DLS). Hydrodynamic size and size distribution of as-synthesized and phase transferred silver nanoparticles are 8.2 ± 1.5 nm (σ = 18.3%) and 31.1 ± 4.5 nm (σ = 14.5%), respectively. Antimicrobial activities of hydrophilic silver nanoparticles is tested against two Gram positive (Bacillus megaterium and Staphylococcus aureus), and three Gram negative (Escherichia coli, Proteus vulgaris and Shigella sonnei) bacteria. Minimum inhibitory concentration (MIC) values obtained in the present study for the tested microorganisms are found much better than those reported for commercially available antibacterial agents.     

Synthesis of VO2 (B) nanorods for Li battery application

Vanadium dioxide nanorods were synthesized through a hydrothermal reaction from V₂O₅ xerogel, poly(vinyl pyrrolidone) (PVP) and lithium perchlorate (LiClO₄). The prepared samples were characterized by X-ray diffraction, infrared spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electrochemical discharge–charge cycling in lithium battery. SEM images reveal the nanorods to have dimensions on the order of 1–3 μm in length and 10–50 nm in diameter. The measured initial discharge capacity of the lithium battery with a cathode made of VO₂ (B) nanorods was 152 mA h/g.     

Immobilization of silver nanoparticles on silica microspheres

The silver nanoparticles (Ag NPs) have been immobilized onto silica microspheres through the adsorption and subsequent reduction of Ag⁺ ions on the surfaces of the silica microspheres. The neat silica microspheres that acted as the core materials were prepared through sol–gel processing; their surfaces were then functionalized using 3-mercaptopropyltrimethoxysilane (MPTMS). The major aims of this study were to immobilize differently sized Ag particles onto the silica microspheres and to understand the mechanism of formation of the Ag nano-coatings through the self-assembly/adsorption behavior of Ag NPs/Ag⁺ ions on the silica spheres. The obtained Ag NP/silica microsphere conglomerates were characterized by field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), and energy-dispersive spectroscopy (EDS). Their electromagnetic wave shielding effectiveness were also tested and studied. The average particle size of the obtained Ag NPs on the silica microsphere was found that could be controllable (from 2.9 to 51.5 nm) by adjusting the ratio of MPTMS/TEOS and the amount of AgNO₃.     

Sensitivity of styrene oxidation reaction to the catalyst structure of silver nanoparticles

This study shows how different morphologies of silver nanoparticles affect the selective oxidation of styrene in the gas phase using oxygen as oxidant. Silver nanoparticles (nanowires and nanopolyhedra), prepared using the polyol process, were supported on α-Al₂O₃. For comparison, a conventional catalyst obtained by wet impregnation was also prepared. Phenylacetaldehyde (Phe) and styrene oxide (SO) were the main products for nanoparticles catalysts. The promotion effect on the catalytic activity of potassium and cesium on the silver nanowires catalysts was also studied. At 573 K, the styrene conversion and selectivity to styrene oxide with the silver nanowires catalyst were 57.6 and 42.5%, respectively. Silver nanopolyhedra catalyst showed 57.5% conversion and 30.8% selectivity to styrene oxide. The promotion by cesium played an important role in improving the epoxidation of styrene. The samples were structurally characterized using X-ray diffraction (XRD), ultraviolet-visible spectroscopy (UV-vis), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). X-ray photoelectron spectroscopy (XPS) and temperature programmed reduction (TPR) were applied to characterize the oxygen species detected (O_β, O_γ) on the silver surface.     

Continuous synthesis of colloidal silver nanoparticles by electrochemical discharge in aqueous solutions

This article presents an electrochemical discharge (ECD) method that consists of a combination of chemical methods and electric arc discharges. In the method, 140 V is applied to an Ag electrode from a DC power supply. The arc-discharge between the electrodes produces metallic silver nanoparticles and silver ions in the aqueous solution. Compared with the original arc discharge, this ECD method creates smaller nanoparticles, prevents clumping of the nanoparticles, and shortens the production time. The citrate ions also reduce the silver ions to silver nanoparticles. In addition, the citrate ions cap the surface of the produced silver nanoparticles and the zeta potential increases. In this article, the weight loss of the electrodes and the reduction of silver ions to silver nanoparticles as a function of citrate concentration and electric conductivity of the medium are discussed. Furthermore, the properties of the colloidal silver prepared with ECD are analyzed by UV–Vis spectroscopy, dynamic light scattering, electrophoresis light scattering, and scanning electron microscopy. Finally, a continuous production apparatus is presented for the continuous production of colloidal silver.     

Synthesis of C–N nanotube blocks and Y-junctions in bamboo-like C–N nanotubes

We report the observations made on the synthesis and characterization of C–N nanotube blocks and Y-junctions in bamboo-like C–N nanotubes. The C–N nanotube Blocks have been synthesized by pyrolyzing the mixture of silver nitrate acetonitrile solution and ferrocene benzene solution. The structural/microstructural characterization of the as-synthesized material has been done using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). X-ray photoelectron spectroscopic (XPS) analysis has been carried out to confirm the presence of nitrogen in nanotubes. These investigations reveal the formation of blocks of bamboo-like nanotubes having the dimension 300 × 200 × 30 μm and the diameter is 20–50 nm. We also observe the formation of Y-junctions in bamboo-like nanotubes as we spray the acetonitrile ferrocene and AgNO₃ mixture. The length of the synthesized Y-junction nanotube bundles is ~2 μm. Some more complex Ψ-shaped junctions are also found to be present. The diameters of the Y-junction nanotubes is ~80 nm at the junction and 25–50 nm at the branches.     

Fusarium solani: a novel biological agent for the extracellular synthesis of silver nanoparticles

We report extracellular biosynthesis of silver nanoparticles by Fusarium solani (USM-3799), a phytopathogen causing disease in onion, when challenged with 1 mM silver nitrate (AgNO₃). The formation of nanoparticles was characterized by visual observation followed by UV–Vis spectrophotometric analysis, which showed a peak at about 420 nm, which is very specific for silver nanoparticles. Further analysis carried out by Fourier Transform Infrared Spectroscopy (FTIR), provides evidence for the presence of proteins as capping agent, which helps in increasing the stability of the synthesized silver nanoparticles. Transmission Electron Microscopy (TEM) investigations confirmed that silver nanoparticles were formed. The synthesized silver nanoparticles were found to be polydispersed, spherical in the range of 5–35 nm with average diameter of 16.23 nm. Extracellular synthesis of nanoparticles could be highly advantageous from the point of view of synthesis in large quantities and easy downstream processing.     

Microwave-assisted rapid synthesis of Ag nanoparticles/graphene nanosheet composites and their application for hydrogen peroxide detection

Abstract  

Ag nanoparticles/graphene nanosheet (AgNPs/GN) composites have been rapidly prepared by a one-pot microwave-assisted reduction method, carried out by microwave irradiation of a N,N-dimethylformamide (DMF) solution of graphene oxide (GO) and AgNO₃. Several analytical techniques including UV–vis spectroscopy, FT-IR spectroscopy, Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM) have been used to characterize the resulting AgNPs/GN composites. It suggests that such composites exhibit good catalytic activity toward reduction of hydrogen peroxide (H₂O₂), leading to a H₂O₂ sensor with a fast amperometric response time of less than 2 s. The linear detection range is estimated to be from 0.1 to 100 mM (r = 0.999), and the detection limit is estimated to be 0.5 μM at a signal-to-noise ratio of 3.     

Influence of pH on the preparation of dispersed Ag–TiO<Subscript>2</Subscript> nanocomposite

In this paper, data concerning the effect of pH on the morphology of Ag–TiO₂ nanocomposite during photodeposition of Ag on TiO₂ nanoparticles is reported. TiO₂ nanoparticles prepared by sol–gel method were coated with Ag by photodeposition from an aqueous solution of AgNO₃ at various pH levels ranging from 1 to 10 in a titania sol, under UV light. The as-prepared nanocomposite particles were characterized by UV–vis absorption spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂ adsorption/desorption method at liquid nitrogen temperature (−196 °C) from Brunauer–Emmett–Teller (BET) measurements. It is shown that at a Ag loading of 1.25 wt.% on TiO₂, a high-surface area nanocomposite morphology corresponding to an average of one Ag nanoparticle per titania nanoparticle was achieved. The diameter of the titania crystallites/particles were in the range of 10–20 nm while the size of Ag particles attached to the larger titania particles were 3 ± 1 nm as deduced from crystallite size by XRD and particle size by TEM. Ag recovery by photo harvesting from the solution was nearly 100%. TEM micrographs revealed that Ag-coated TiO₂ nanoparticles showed a sharp increase in the degree of agglomeration for nanocomposites prepared at basic pH values, with a corresponding sharp decrease in BET surface area especially at pH > 9. The BET surface area of the Ag–TiO₂ nanoparticles was nearly constant at around a value of 140 m² g⁻¹ at all pH from 1–8 with an anomalous maximum of 164 m² g⁻¹ when prepared from a sol at pH of 4, and a sharp decrease to 78 m² g⁻¹ at pH of 10.     

Preparation and characterization of the transparent nanocomposite mirror film for the infrared region by sol–gel method

Transparent mirror coated, SiO₂–Ag/PV P nanocomposites were prepared on the Pyrex glass slides by dip-coating technique. Embedding of the silver (Ag) nanoparticles on silica modified polyvinyl pyrrolidone (PVP) was performed by the sol–gel method. As prepared transparent mirror coated SiO₂–Ag/PV P nanocomposite films were finally characterized for surface morphology, chemistry, and nano size dimensions using various advanced analytical techniques including, UV visible, Fourier transform, infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), scanning electron microscopy (SEM), dispersive x-ray analaysis (EDAX) and transmission electron microscopy (TEM) analysis. It was found that all the prepared samples were almost uniform particles of Ag nanospheres of 7–8 nm diameters arranged as double paralleled nanowires with an average length of 200–450 nm and diameters of around 20–25 nm.     

Shape-dependent plasmon resonances of Ag nanostructures

Different silver nanostructures have been rapidly synthesized under microwave irradiation from a solution of silver nitrate (AgNO₃) and β$\beta$-D glucose; neither additional reducing nor capping agent were required in this soft green solution approach. Not only spherical nanoparticles, but also necklace and wires have been synthesized. The plasmon resonances of the synthesized silver nanostructures were tuned by varying the irradiation time and hence by changing size and morphology of nanostructures. The obtained nanostructures were characterized by X-Ray diffraction (XRD), Uv–Vis spectroscopy (Uv–Vis), transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The change of peak position and the shape of the absorption spectra were clearly observed during the whole reaction process; in fact, it was evidenced that initially Ag nanoparticles were formed, which, as reaction time elapsed, self-assembled and fused with each other to yield nanowires.     

A novel precursor for synthesis of metallic copper nanocrystals by thermal decomposition approach

[Bis(2-hydroxy-1-naphthaldehydato)copper(II)] complex, as a novel precursor, was employed in thermal decomposition process to synthesize metallic copper nanoparticles using oleylamine (C₁₈H₃₇N) as capping agent. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and ultraviolet-visible (UV-vis) spectroscopy. The synthesized copper nanoparticles have a fcc structure with average size 20-35 nm.     

Biological Production of Gold Nanoparticles at Different Temperatures: Efficiency Assessment

The study aims to compare different approaches and efficacies during the biological production of nanoparticles (NPs). Gold nanoparticles (AuNPs) are produced by Fusarium oxysporum at two different temperatures. One flask is incubated at 37 °C (“Common”) and the other is directly heated for 5 min at 80 °C (“Heat-treated”). Obtained AuNPs are analyzed and compared by spectrophotometry, transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), dynamic light scattering (DLS), and Fourier transform infrared spectroscopy (FTIR). Graphite furnace atomic absorption spectroscopy (GF-AAS) is used to determine the particle concentration after the AuNPs production. The AuNPs prepared by both (the Common and the Heat-treated) methods exhibit maximum absorption peaks at 541 and 528 nm, respectively, and have round shapes and sizes of less than 50 nm. Their zeta potential is about −28 mV. GF-AAS shows that the efficiency of AuNP production in Common- and Heat-treated samples is equal, between 65% and 68%. Since the Heat-treated sample shows a better size distribution, the use of higher temperature and shorter time period is preferable for the bioproduction of AuNPs. It seems that shortening the time for the production of AuNPs prevents the formation of larger NPs.