银纳米修饰电极的制备及电化学行为

金属纳米粒子由于其小的体积和大的比表面积而具有独特的电子、光学和异相催化特性,是目前表面纳米工程及功能化纳米结构制备的一种理想研究对象[1]。银纳米粒子可广泛应用于催化剂材料、电池的电极材料、低温导热材料和导电材料等,成为近年来人们研究的热点[2,3]。在电化学方面,银纳米粒子具有比其他纳米粒子更为优异的导电性能和电催化性能。因此,研究银纳米粒子修饰电极有重要的应用价值和前景[4]。1实验部分1.1仪器CHI660电化学工作站(USA);TU-1901型双光束紫外可见分光光度计(北京普析通用仪器公司);KQ-100型超声清洗器(昆山市超声…     

甲烷氧化菌素功能化金纳米层层自组装修饰电极上过氧化氢的催化还原

借助巯基试剂,在纳米金颗粒表面修饰生物活性物质Mb,制备保持有Mb生物活性的功能化金纳米巯基乙胺-Au NPs-Mb.采用UV-Vis、FTIR光谱和投射电镜表征其结构,该纳米颗粒分布均匀且粒径均一,并显著改善了金纳米颗粒团聚现象.以Mb功能化金纳米为基元,采用单层自组装及层层自组装方式将其修饰到裸金电极表面.各Mb或Mb-Cu电极的电化学测试并未借助电子传递媒介.配位Cu~(2+)后,修饰有Mb的单层及层层自组装修饰的催化还原能力均显著提升.其中Cu~(2+)配位的{巯基乙胺-Au NPs-Mb}3/Au修饰电极作为一种新型H2O2生物传感器,响应时间大约为2 s,米氏常数KappM为0.787 mmol/L,表现出了较强的还原H2O2的催化活性,且稳定性较好.     

Myoglobin/arylhydroxylamine film modified electrode: Direct electrochemistry and electrochemical catalysis

The adsorption processes and electrochemical behavior of 4-nitroaniline (4-NA) adsorbed onto glassy carbon electrodes (GCE) have been investigated in aqueous 0.1 M nitric acid (HNO₃) electrolyte solutions using cyclic voltammetry (CV). 4-NA adsorbs onto GCE surfaces, and upon potential cycling past −0.2 V, is transformed into the arylhydroxylamine (ArHA) derivative which exhibits a well-behaved pH dependent redox couple centered at 0.32 V at pH 1.5. It is noted as arylhydroxylamine modified glassy carbon electrodes (HAGCE). This modified electrode can be readily used as an immobilization matrix to entrap proteins and enzymes. In our studies, myoglobin (Mb) was used as a model protein for investigation. A pair of well-defined reversible redox peaks of Mb (Fe(III)-Fe(II)) was obtained at the Mb/arylhydroxylamine modified glassy carbon electrode (Mb/HAGC) by direct electron transfer between the protein and the GCE. The formal potential (E^0′), the apparent coverage (Γ^*) and the electron-transfer rate constant (k_s) were calculated as −0.317 V, 8.26 × 10⁻¹² mol/cm² and 51 ± 5 s⁻¹, respectively. Dramatically enhanced biocatalytic activity was exemplified at the Mb/HAGC electrode by the reduction of hydrogen peroxide (H₂O₂), trichloroacetic acid (TCA) and oxygen (O₂). The Mb/arylhydroxylamine film was also characterized by UV-visible spectroscopy (UV-vis), scanning electron microscope (SEM) indicating excellent stability and good biocompatibility of the protein in the arylhydroxylamine modified electrode. This new Mb/HAGC electrode exhibited rapid electrochemical response (2 s) for H₂O₂ and had good stability in physiological condition, showing the potential applicability of the films in the preparation of third generation biosensors or bioreactors based on direct electrochemistry of the proteins.     

Fabrication of Covalently Attached Multilayer Film Electrode Containing Iron Porphyrin and Its Electrocatalysis Toward Sulfite

Construction of a highly stable covalently attached multilayer film electrode containing iron porphyrin was achieved by UV irradiation of ionic self‐assembled multilayer films of diazo‐resins (DAR) and anionic Fe(III)tetrakis(p‐sulfonatophenyl)porphyrin (FeTSPP). The multilayer films had been characterized by UV, IR spectra and cyclic valtammetry. The electrocatalytic transformation of sulfite to SO₄^2? by the multilayer film electrode containing FeTSPP was investigated. In 0.1 M NH₄OH? NH₄Cl buffer solution (pH 8.74) and 0.1 M borate buffer solution (pH 9.18) the electrocatalytic oxidation of sulfite through the multilayer film electrode can be performed. However, in acetate buffer solution (pH 4.0) the electrocatalytic reduction of sulfite by the multilayer film electrode had also good activity. The modified electrode also exhibited a fast response and good stability.     

Electroactive porous films of myoglobin within calcium alginate

In this work, a novel two-step construction strategy for protein assembly films was proposed. The first step was the preparation of porous calcium alginate (CA) films by spraying calcium chloride (CaCl₂) solution over the mixture surface of sodium alginate and polyethylene glycol on various solid substrates. The second step involved the cast of myoglobin (Mb) onto the porous CA films and then formed the electroactive porous Mb-CA films. The nitrogen adsorption desorption isotherm, scanning electron microscope, alternating current impendence and cyclic voltammetry were used to characterize the porous films. Fully hydrated porous CA films had nearly 90 wt% water contents and UV–vis showed that Mb in the porous films retained its near native conformation at medium pH. The stable films modified on glassy carbon electrode demonstrated good electroactivity in protein-free buffer, which was originated from protein heme Fe(III)/Fe(II) redox couples. The electrochemical parameters such as apparent heterogeneous electron transfer rate constant (k _s) and formal potential (E ^o′) were estimated by fitting the data of square-wave voltammetry with nonlinear regression analysis. It was observed that the formal potential of the Mb Fe(III)/Fe(II) couple in porous CA films shifted linearly between pH 4.0 and 11.0 with a slope of −52.7 mV/pH, suggesting that one proton transfer was coupled to each electron transfer in the electrochemical reaction. The porous Mb-CA films showed the electrocatalytic activity toward dioxygen, hydrogen peroxide, and nitrite with significant decreases in the electrode potential required, and exhibited good operational and storage stability, reproducibility and fast response time for H₂O₂ detection. It is showing the possible future application of the films for biosensors and biocatalysis.     

Buildup of gold nanoparticle multilayer thin films based on the covalent-bonding interaction between boronic acids and polyols

A novel method for the fabrication of gold nanoparticle multilayer films based on the covalent-bonding interaction between boronic acid and polyols, poly(vinyl alcohol) (PVA), was developed. The multilayer buildup was monitored by UV-vis absorbance spectroscopy, which showed a linear increase of the film absorbance with the number of adsorbed Au layers and indicated the stepwise and uniform assembling process. The atomic force microscopy (AFM) image showed that a compact gold multilayer thin film was successfully assembled. The residual boronic acid group on the surface of thin film could incorporate glycosylated-protein horseradish peroxidase (HRP), and good catalytic activity for H2O2 could be observed.     

One-step synthesis and stabilization of gold nanoparticles and multilayer film assembly

Au nanoparticles (NPs) were synthesized in the one-pot procedure in water at room temperature with the wheel-shaped V^V-V^IV mixed-valence tungstovanadate [P₈W₄₈O₁₈₄{V₄^VV₂^IVO₁₂(H₂O)₂}₂]³²⁻ (V12) acting as both reducing and stabilizing agents. The V12 stabilized Au NPs (Au@V12 NPs) were characterized by SEM, TEM, DLS, UV-vis spectroscopy, XPS, and XRD analyses and the negatively charged surface of the Au@V12 NPs was proved by the zeta potential analysis. Based on the layer-by-layer assembly (LbL), the Au@V12 NPs-containing multilayer films have been fabricated on ITO-coated glass slide and quartz substrates with poly(ethyleneimine) (PEI). The regular growth of the multilayer films was monitored by UV-vis spectroscopy and cyclic voltammetry, the composition was characterized by XPS. The Au@V12 NPs based composite films showed electrocatalytic activities towards the reduction of dioxygen and the oxidation of methanol. This approach is expected to open the way towards procedures aimed at the one-step fabrication of Au NPs and polyoxometalates (POMs) into the multilayer films.     

Electrodeposited nanogold decorated graphene modified carbon ionic liquid electrode for the electrochemical myoglobin biosensor

In this paper, a carbon ionic liquid electrode (CILE) was fabricated using ionic liquid 1-hexylpyridinium hexafluorophosphate as modifier, which was further in situ electrodeposited with graphene (GR) and gold nanoparticles step by step to get an Au/GR nanocomposite modified CILE. Myoglobin (Mb) was further immobilized on the Au/GR/CILE surface with Nafion film to get the modified electrode denoted as Nafion/Mb/Au/GR/CILE. Cyclic voltammetric experiments indicated that a pair of well-defined quasi-reversible redox peaks appeared in pH 3.0 phosphate buffer solution with the formal potential (E ^0′) located at ?0.197 V (vs. saturated calomel electrode), which was the typical characteristics of Mb heme Fe(III)/Fe(II) redox couples. Thus, the direct electron transfer rate between Mb and the modified electrode was promoted due to the high conductivity and increased surface area of Au/GR nanocomposite present on electrode surface. Based on the cyclic voltammetric data, the electrochemical parameters of Mb on the modified electrode were calculated. The Mb-modified electrode showed excellent electrocatalytic activities towards the reduction of trichloroacetic acid and H₂O₂ with wider linear range and lower detection limit. Using GR and Au nanoparticles modified CILE, a new third-generation electrochemical Mb biosensor was constructed with good stability and reproducibility.     

Rapid DNA electrochemical biosensing platform for label-free potentiometric detection of DNA hybridization

This paper described a novel electrochemical DNA biosensor for rapid specific detection of nucleic acids based on the sulfonated polyaniline (SPAN) nanofibre and cysteamine-capped gold nanoparticle (CA-G_NP) layer-by-layer films. A precursor film of 3-mercaptopropionic acid (MPA) was firstly self-assembled on the Au electrode surface. CA-G_NP was covalently deposited on the Au/MPA electrode to obtain a stable substrate. SPAN nanofibre and CA-G_NP were alternately layer-by-layer assembled on the stable substrate by electrostatic force. Cyclic voltammetry was used to monitor the consecutive growth of the multilayer films by utilizing [Fe(CN)₆]^3−/4− as the redox indicator. The (CA-G_NP/SPAN)_n films showed satisfactory ability of electron transfer and excellent redox activity in neutral media. Negatively charged probe ssDNA was immobilized on the outer layer of the multilayer film (CA-G_NP) through electrostatic affinity. Chronopotentiometry and electrochemical impedance spectroscopy were employed to obtain the direct electrochemical readout for probe ssDNA immobilization and hybridization using [Fe(CN)₆]^3−/4− in solution as the mediator. While electrochemical impedance spectroscopy led to the characterization of the electron-transfer resistance at the electrode, chronopotentiometry provided the total resistance at the interfaces of the modified electrodes. A good correlation between the total electrode resistances and the electron-transfer resistances at the conducting supports was found. Chronopotentiometry was suggested as a rapid transduction means (a few seconds). Based on the (CA-G_NP/SPAN)_n films, the target DNA with 20-base could be detected up to 2.13 × 10⁻¹³ mol/L, and the feasibility for the detection of base-mismatched DNA was also demonstrated.     

基于血红蛋白/硒化镉量子点多层膜的H2O2生物传感器

合成了水溶性硒化镉(CdSe)量子点,利用组装技术和静电吸附作用,将带正电荷的血红蛋白(Hb)和带负电荷的CdSe量子点层层组装到壳聚糖(chit)修饰的玻碳电极(GCE)表面,构建基于{Hb/CdSe}n多层膜的无电子媒介体的电流型生物传感器({Hb/CdSe}3/chit/GCE).运用紫外-可见吸收光谱、电致化学发光、交流阻抗和循环伏安技术来表征修饰膜,并研究传感器的作用机理、性能及分析应用.结果表明:与量子点薄膜法及量子点/血红蛋白复合物法等固载血红蛋白的其他方法相比,层层组装法能显著提高血红蛋白的固定量,保持血红蛋白的生物活性,增强传感器的灵敏度和稳定性.传感器检测H2O2的线性范围为4.0×10-8～4.8×10-6 mol·L-1(r=0.999 1),检测限为2.0×10-8mol·L-l.多层膜的电致化学发光研究,表明修饰电极有望用于电致化学发光传感器的制备.     

A Novel NH2/ITO Ion Implantation Electrode: Preparation,Characterization, and Application in Bioelectrochemistry

A novel NH₂⁺ ion implantation‐modified indium tin oxide (NH₂/ITO) electrode was prepared. Acid‐pretreated, negatively charged MWNTs were firstly modified on the surface of NH₂⁺ ion implantation electrode, then, positively charged Mb was adsorbed onto MWNTs films by electrostatic interaction. The assembly of MWNTs and Mb was characterized with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The immobilized Mb showed a couple of quasireversible cyclic voltammetry peaks in pH 7.0 phosphate buffer solution (PBS). The apparent surface concentration of Mb at the electrode surface was 1.06×10^?9 mol cm^?2. The Mb/MWNTs/NH₂/ITO electrode also gave an improved electrocatalytic activity towards the reduction of hydrogen peroxide. The catalysis currents increased linearly to the H₂O₂ concentration in a wide range from 9×10^?7 to 9.2×10^?5 M with a correlation coefficient of 0.999. The detection limit was 9.0×10^?7 M. The experiment results demonstrated that the modified electrode provided a biocompatible microenvironment for protein and supplied a necessary pathway for its direct electron transfer.     

Gold nanoparticle multilayer films based on surfactant films as a template: preparation, characterization, and application

Highly ordered gold nanoparticle multilayer films were achieved conveniently using didodecyldimethylammonium bromide (DDAB) films as a template. The template was produced by casting DDAB chloroform solution onto the surface of a (3-aminopropyl)trimethoxysilane-modified indium tin oxide substrate and then evaporating the organic solvent. Gold nanoparticle multilayer films were prepared by soaking the template in 2.6 nm colloidal gold solution for 120 min. The well-ordered superlattice structure of the DDAB template and the gold nanoparticle multilayer films was identified by x-ray diffraction. The characterizations of the gold nanoparticle multilayer films by UV-vis spectroscopy, atomic force microscopy, and cyclic voltammerty were described in detail. The application of the as-prepared gold nanoparticle multilayer films in surface-enhanced Raman spectroscopy (SERS) was investigated by using Rhodamine 6G as a probe molecule. It was found that the colloidal gold nanoparticle multilayer films exhibit remarkable enhancement ability and can be used as SERS substrates.     

Multilayer films of carbon nanotubes and redox polymer on screen-printed carbon electrodes for electrocatalysis of ascorbic acid

Multilayer films containing multiwall carbon nanotubes and redox polymer were successfully fabricated on a screen-printed carbon electrode using layer-by-layer (LBL) assembled method. UV-vis spectroscopy, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy and electrochemical method were used to characterize the assembled multilayer films. The multilayer films modified electrodes exhibited good electrocatalytic activity towards the oxidation of ascorbic acid (AA). Compared with the bare electrode, the oxidation peak potential negatively shifted about 350 mV (versus Ag/AgCl). Furthermore, the modified screen-printed carbon electrodes (SPCEs) could be used for the determination of ascorbic acid in real samples.     

Blocking properties of gold electrodes modified with 4-nitrophenyl and 4-decylphenyl groups

The electrochemical properties of Au electrodes grafted with 4-nitrophenyl and 4-decylphenyl groups have been studied. The electrografting of gold electrode surface with aryl groups was carried out by electroreduction of the corresponding diazonium salts in acetonitrile. The nitrophenyl film growth on gold was examined by atomic force microscopy, electrochemical quartz crystal microbalance and X-ray photoelectron spectroscopy. These measurements showed that a multilayer film of nitrophenyl groups was formed. Cyclic voltammetry was used to study the blocking properties of aryl-modified gold electrodes towards the Fe(CN)₆^3−/4− redox system. The reduction of oxygen was strongly suppressed on these electrodes as evidenced by the rotating disc electrode results.     

Assembly of electroactive layer-by-layer films of myoglobin and ionomer poly(ester sulfonic acid)

Layer-by-layer films were assembled on solid substrates by alternate adsorption of negatively charged ionomer poly(ester sulfonic acid) or Eastman AQ55 from its aqueous dispersion and positively charged myoglobin (Mb) from its solution at pH 4.5. The film assembly process was monitored by cyclic voltammetry (CV), UV-vis spectroscopy, and quartz crystal microbalance (QCM). [AQ/Mb](n) films grown on pyrolytic graphite (PG) electrodes showed a pair of well-defined and nearly reversible CV peaks at about -0.20 V vs Ag/AgCl in pH 5.5 buffers, characteristic of the Mb heme Fe(III)/Fe(II) redox couple. Although the amount of Mb adsorbed in each bilayer was essentially the same, the fraction of electroactive Mb decreased dramatically with an increase of bilayer number (n). Soret absorption bands of [AQ/Mb](n) films on glass slides suggest that Mb in the films retains its native state in the medium pH range. Trichloroacetic acid, oxygen, and hydrogen peroxide were electrochemically catalyzed by [AQ/Mb](6) films with significant lowering of reduction overpotential.     

Construction of glucose biosensor based on sorption of glucose oxidase onto multilayers of polyelectrolyte/nanoparticles

A new approach to constructing an enzyme-containing film on the surface of a gold electrode for use as a biosensor is described. A basic multilayer film (BMF) of (PDDA/GNPs) _n /PDDA was first constructed on the gold electrode by electrostatic layer-by-layer self-assembly of poly(diallyldimethylammonium chloride) (PDDA) and gold nanoparticles (GNPs). Glucose oxidase (GOx) was then sorbed into this BMF by dipping the BMF-modified electrode into a GOx solution. The assembly of the BMF was monitored and tested via UV-vis spectroscopy and cyclic voltammetry (CV). The ferrocenemethanol-mediated cyclic voltammograms obtained from the gold electrode modified with the (PDDA/GNPs) _n /PDDA/GOx indicated that the assembled GOx remained electrocatalytically active for the oxidation of glucose. Analysis of the voltammetric signals showed that the surface coverage of active enzyme was a linear function of the number of PDDA/GNPs bilayers. This result confirmed the penetration of GOx into the BMF and suggests that the BMF-based enzyme film forms in a uniform manner. Electrochemical impedance measurements revealed that the biosensor had a lower electron transfer resistance (R _et) than that of a sensor prepared by layer-by-layer assembly of PDDA and GOx, due to the presence of gold nanoparticles. The sensitivity of the biosensor for the determination of glucose, which could be controlled by adjusting the number of PDDA/GNPs bilayers, was investigated.     

Biopolymer and carbon nanotubes interface prepared by self-assembly for studying the electrochemistry of microperoxidase-11

Stable films of biopolymer chitosan and carbon nanotubes were prepared by a layer-by-layer self-assembly technique. Atomic force microscopy, scanning electron microscopy, cyclic voltammetry, and UV-vis spectroscopy were used to characterize the film assembly. Atomic force microscopy and scanning electron microscopy showed that an even, stable film was formed. The UV-vis spectroscopy and cyclic voltammetry study indicated the uniform growth of the film. The property of the self-assembled multilayer film in promoting protein electron transfer was demonstrated by incorporating microperoxidase-11 in the film. Microperoxidase-11 in the multilayer film could transfer electrons with the electrode indicating that carbon nanotubes could wire the protein to the electrode. The electrocatalytic activity of the microperoxidase-11 containing multilayer film-modified electrode toward H(2)O(2) and O(2) was investigated. The results showed that along with the increase in the assembled layers the electrocatalytic reduction potentials of H(2)O(2) and O(2) shifted positively. The prepared multilayer film of chitosan and carbon nanotubes containing protein was a sensitive interface for electrocatalytic study.     

Electroactive layer-by-layer films of heme protein-coated polystyrene latex beads with poly(styrene sulfonate)

In this work, a novel two-step construction strategy for protein layer-by-layer assembly films was proposed. In the first step, positively charged hemoglobin (Hb) or myoglobin (Mb) at pH 5.0 was adsorbed on the negatively charged surface of 500 nm diameter-sized polystyrene (PS) latex beads, forming core-shell structured PS-protein particles. In the next step, the PS-protein particles were further assembled layer by layer with oppositely charged poly(styrene sulfonate)(PSS) on various solid surfaces under suitable conditions. Cyclic voltammetry (CV), quartz crystal microbalance (QCM), and UV-vis spectroscopy were used to monitor the growth of {(PS-protein)/PSS}(n) films. The stable {(PS-protein)/PSS}(n) films modified on pyrolytic graphite (PG) electrodes demonstrated good electroactivity in protein-free buffer, which was originated from protein heme Fe(III)/Fe(II) redox couples, and the electroactivity extended to six (PS-protein)/PSS bilayers. UV-vis spectroscopy showed that Hb and Mb in the films retained their near-native structure in the medium pH range. {(PS-protein)/PSS}(n) films catalyzed electrochemical reduction of oxygen, hydrogen peroxide, trichloroacetic acid (TCA) and nitrite with a significant lowering of overpotential, and displayed better catalytic activity than corresponding cast PS-protein films.     

Direct Electrochemistry and Electrocatalysis of Myoglobin with Ionic Liquid through Multilayers Film on Carbon Ionic Liquid Electrode

Multilayers of myoglobin (Mb) with ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate ([EMIM]BF₄) was assembled on carbon ionic liquid electrode (CILE) based on the electrostatic attraction between the negatively charged Mb and the positively charged imidazolium ion of IL. The CILE was fabricated with 1‐ethyl‐3‐methylimidazolium ethylsulfate ([EMIM]EtOSO₃) as the modifier, which exhibited imidazolium ion on the electrode surface. Then Mb molecules were assembled on the surface of CILE step‐by‐step to get a {IL/Mb}_n multilayer film modified electrode. UV‐Vis adsorption and FT‐IR spectra indicated that Mb remained its native structure in the IL matrix. In deaerated phosphate buffer solution (pH 7.0) a pair of well‐defined quasi‐reversible redox peaks appeared with the apparent formal potential (E^0′) as ‐0.212 V (vs. SCE), which was the characteristic of Mb heme Fe(III)/Fe(II) redox couples. The results indicated that the direct electron transfer of Mb was realized on the modified electrode. The {IL/Mb}_n/CILE displayed excellent electrocatalytic ability to the trichloroacetic acid reduction in the concentration range from 2.0 to 22.0 mmol/L with the detection limit of 0.6 mmol/L (3σ). The proposed method provides a new platform to fabricate the third generation biosensor based on the self‐assembly of redox protein with ILs.     

Layer-by-layer self-assembly and electrocatalytic properties of poly(ethylenimine)-silicotungstate multilayer composite films

Hybrid multilayer films composed of poly(ethylenimine) and the Keggin-type polyoxometalates [ SiW₁₁O₃₉ ]^{8 -} ( SiW₁₁ ) {\left[ {{\hbox{Si}}{{\hbox{W}}_{{11}}}{{\hbox{O}}_{{39}}}} \right]^{{8} - }}\left( {{\hbox{Si}}{{\hbox{W}}_{{11}}}} \right) and [ SiW₁₁Co^II( H₂O )O₃₉ ]^{6 -} ( SiW₁₁Co ) {\left[ {{\hbox{Si}}{{\hbox{W}}_{{11}}}{\hbox{C}}{{\hbox{o}}^{\rm{II}}}\left( {{{\hbox{H}}_2}{\hbox{O}}} \right){{\hbox{O}}_{{39}}}} \right]^{{6} - }}\left( {{\hbox{Si}}{{\hbox{W}}_{{11}}}{\hbox{Co}}} \right) were prepared on glassy carbon electrodes by layer-by-layer self-assembly, and were characterized by cyclic voltammetry and scanning electron microscopy. UV-vis absorption spectroscopy of films deposited on quartz slides was used to monitor film growth, showing that the absorbance values at characteristic wavelengths of the multilayer films increase almost linearly with the number of bilayers. Cyclic voltammetry indicates that the electrochemical properties of the polyoxometalates are maintained in the multilayer films, and that the first tungsten reduction process for immobilized SiW₁₁ and SiW₁₁Co is a surface-confined process. Electron transfer to [ Fe( CN )₆ ]^{3 - /4 -} {\left[ {{\hbox{Fe}}{{\left( {\hbox{CN}} \right)}_6}} \right]^{{3} - /{4} - }} and [ Ru( NH₃ )₆ ]^{3 + /2 +} {\left[ {{\hbox{Ru}}{{\left( {{\hbox{N}}{{\hbox{H}}_3}} \right)}_6}} \right]^{{3} + /{2} + }} as electrochemical probes was also investigated by cyclic voltammetry. The (PEI/SiW₁₁Co)_n multilayer films showed excellent electrocatalytic reduction properties towards nitrite, bromate and iodate.