基于十六烷基三甲基溴化铵存在下铅、银离子的高灵敏度电化学测定

报道了在适量十六烷基三甲基溴化铵 (CTMAB)存在下 ,高灵敏度测定水体中铅、银离子的化学修饰碳糊电极。在pH 2 .5 0 .1mol LKNO3溶液中 ,铅、银离子在钠型蒙脱石修饰碳糊电极上通过离子交换而富集 ,同时被还原。在阳极扫描过程中 ,分别在 - 0 .5 2V和 0 .2 3V(vs.SCE)处出现灵敏的溶出峰。详细研究了测定水样中铅、银离子的条件 ,如介质的pH、CTMAB用量、修饰剂用量、富集电位和时间等。该修饰电极连续测定铅、银离子的线性范围为 5 .0× 10 - 9mol L～ 1.0× 10 - 7mol L(Pb2 + )和 8.0× 10 - 9mol L～ 1.0× 10 - 7mol L(Ag+ ) ,富集 4min后检出限分别为 1.0× 10 - 1 0 mol L(Pb2 + )和 3.0× 10 - 1 0 (Ag+ )。     

离子交换伏安法同时测定水体中的镉、汞

报道了一种同时快速测定水体中痕量镉、汞的电分析方法。在 p H 4.0 0的磷酸盐缓冲溶液中 ,镉、汞在钠型蒙脱石修饰玻碳电极上通过离子交换富集 ,获得一个灵敏的阳极溶出峰 ,由此可同时测定痕量的镉、汞离子。利用该方法测定镉、汞的线性范围分别为 8× 1 0 - 9到 2× 1 0 - 6 mol/L和 4× 1 0 - 8到 7.5× 1 0 - 6 mol/L ,检出限分别是1× 1 0 - 9mol/L和 8× 1 0 - 9mol/L。该方法简便、快速 ,灵敏度高。用此修饰电极测定了水样中的镉、汞离子 ,结果令人满意     

槲皮素修饰碳糊电极吸附溶出伏安法测定人血清中铜

制作了用槲皮素作修饰剂的修饰碳糊电极 ,利用此电极为工作电极 ,建立了测定痕量铜的新方法。在甲酸钠 -盐酸缓冲溶液 ( p H4.7)中 ,于 0 .2 0 V( vs.SCE下同 )处搅拌富集 ,铜 ( )与碳糊修饰电极表面的槲皮素形成电活性络合物而吸附富集于电极表面 ,于 - 0 .40 V静止还原后 ,阳极化线性扫描 ,在 - 0 .0 3V左右获得一灵敏的二次导数溶出峰。在不同富集时间下 ,其二次导数峰电流与铜 ( )浓度分别在1 .5× 1 0 - 9～ 8.0× 1 0 - 8mol/ L和 1 .5× 1 0 - 8～ 9.0× 1 0 - 7mol/ L两个范围内成良好的线性关系 ,检出限可达 8.0× 1 0 - 10 mol/ L。同时探讨了电极反应机理。方法应用于人血清中痕量铜的测定 ,获得了令人满意的结果     

茜素紫修饰碳糊电极阳极溶出伏安法测定痕量锡

研究了利用茜素紫修饰碳糊电极测定痕量锡的阳极溶出伏安法。在 0 1 5mol/L醋酸盐缓冲溶液 (pH 4 .8)中 ,通过开路富集 ,Sn 和茜素紫形成络合物富集于电极表面 ,然后经过介质交换至 3 0mol/L的盐酸溶液中 ,于 -0 .80V还原后再进行阳极化扫描 ,于 -0 .68V左右获得一灵敏的锡的溶出峰。二次导数峰电流与Sn 浓度在 8.4× 1 0 -9～ 1 .4× 1 0 -6mol/L范围内呈良好的线性关系。检出限达 4×1 0 -9mol/L ,同时对电极反应机理进行了讨论。     

邻苯三酚红修饰碳糊电级阳极溶出伏安法测定痕量锡的研究

研制了邻苯三酚红 ( PR)修饰碳糊电极 ,研究了采用该电极测定痕量锡的阳极溶出伏安法。在 0 .1 5 mol/L乙酸盐缓冲溶液 ( p H 4.5 )中 ,通过开路富集 ,Sn( )与修饰电极表面的邻苯三酚红生成络合物而富集于电极表面 ,然后介质交换至 4.0mol/L盐酸中 ,于 - 0 .80 V还原后再进行阳极化扫描 ,于 - 0 .69V左右获得一灵敏的 Sn的溶出峰 ,二次导数峰电流与 Sn( )浓度在 1 .68× 1 0 - 8～ 1 .68× 1 0 - 6mol/L范围内呈现良好的线性关系 ,检出限达 8× 1 0 - 9mol/L。对电极反应机理进行了讨论 ,方法已应用于罐头食品中锡的测定     

槲皮素化学修饰碳糊电极吸附溶出伏安法测定痕量铅

建立了用槲皮素修饰碳糊电极测定痕量铅的新方法 ,在 0 .1 0mol L甲酸盐缓冲液 (pH 4.3 )中 ,于 -0 .1 0V(vs.SCE)搅拌富集 ,再在 -0 .70V静止还原 40s后 ,阳极化扫描 ,于 -0 .42V左右获得一灵敏的铅阳极溶出峰。在最佳条件下 ,富集不同时间 ,其二次导数峰电流与Pb2 + 在 1 .0× 1 0 - 8～ 8.0× 1 0 - 7mol L和 2 .0× 1 0 - 9～ 6.0× 1 0 - 8mol L两个范围内呈线性关系 ,检出限为 8.0× 1 0 - 1 0 mol L(S N =3 )。同时初步探讨了电极反应机理。     

乙二胺四乙酸二钠/碳糊修饰电极测定银离子

报道EDTA/碳糊修饰电极的制备及对银离子的测定。该电极在硝酸介质中 - 0 .6 0V(vs .Ag/AgCl)电位下富集Ag+ ,在 +0 .0 8V处得到一个灵敏的阳极溶出峰 ,峰电流与Ag+ 浓度在 1.0× 10 -9～ 1.0× 10 -6mol/L范围呈良好线性关系 ,检出限为 6 .8× 10 -10 mol/L。     

丁二酮肟修饰碳糊电极阳极溶出伏安法测定痕量铋

报道了用丁二酮肟修饰碳糊电极测定微量铋的电分析方法。Bi~(3+)通过与电极表面的丁二酮肟作用而富集在电极表面,同时在-0.40 V(vs.SCE)还原成零价,当电极电势从-0.40 V向0.40 V扫描时,被还原的铋从电极表面溶出,在0.03 V出现一个十分灵敏的阳极溶出峰。优化了各种实验参数,如支持电解质的选择及pH值、丁二酮肟的用量、富集电位及时间等。修饰电极测定铋的线性范围为1×10~(-9)～1×10~(-6)mol/L。富集6 min后检出限可达4×10~(-10)mol/L。该方法简便快速,灵敏度高,分析成本低廉,并成功应用于实际水样中微量铋的测定。     

桑色素修饰碳糊电极吸附溶出伏安法测定人尿中痕量铅

制作了用桑色素作修饰剂的碳糊修饰电极 ,利用该电极为工作电极 ,建立了测定痕量铅的新方法。在甲酸钠 盐酸缓冲溶液 (pH 4 .9)中 ,在 - 0 .10V(vs .SCE)下搅拌富集 ,铅 (Ⅱ )与化学修饰碳糊电极表面的桑色素形成电活性络合物而吸附富集于电极表面 ,经 - 0 .85V(vs.SCE)静止还原后 ,阳极化线性扫描 ,在 - 0 .4 3V(vs .SCE)获得一灵敏的二次导数溶出峰。在最佳条件下分别富集 360s和 180s ,其二次导数峰电流与铅 (Ⅱ )浓度分别在 5 .0× 10 - 9～ 1.0× 10 - 7mol·L- 1和 2 0×10 - 8～ 1.0× 10 - 6 mol·L- 1两个范围内呈良好的线性关系 ,富集 6min ,检出限可达 1.0× 10 - 9mol·L- 1(S/N =3)。同时 ,探讨了电极反应机理。方法应用于尿铅测定 ,获得满意的结果     

杯芳烃修饰玻碳电极吸附溶出伏安法测定微量铅

研究了以杯芳烃衍生物修饰玻碳电极,以其吸附溶出伏安法测定微量铅。对富集时间、铅的浓度、支持电解质、样品溶液pH值及部分离子干扰等进行了实验。实验发现以氢氧化钠溶液处理修饰电极可提高测定灵敏度,经过优化处理后,线性范围和检出限分别为5.0×10-7～1.0×10-5mol/L和1.0×10-8mol/L。应用本法对合成水样进行了测定,结果满意。本文还对吸附溶出机理进行了讨论。     

Solid-supported [2+2+2] cyclotrimerizations

The transition-metal-catalyzed [2+2+2] cyclotrimerization of a diyne and an alkyne provides a convergent route to highly-substituted aromatic rings. This reaction possesses distinct drawbacks, especially low chemo- and regioselectivities, which hamper its application in combinatorial synthesis. These problems have been solved by the development of solid-supported [2+2+2]-cycloaddition reactions. If conducted on a solid-support, this reaction enables rapid combinatorial access to diverse sets of carbo- and heterocyclic small-molecule arrays. The scope of this methodology has been investigated by examining different immobilization strategies, different diyne precursors, and a variety of functionalized alkyne reaction partners. Overall, isoindoline, phthalan, and indan libraries were assembled in good to excellent yields and with high purities.     

Intracellular Ruthenium-Promoted (2+2+2) Cycloadditions

Metal-mediated intracellular reactions are becoming invaluable tools in chemical and cell biology, and hold promise for strongly impacting the field of biomedicine. Most of the reactions reported so far involve either uncaging or redox processes. Demonstrated here for the first time is the viability of performing multicomponent alkyne cycloaromatizations inside live mammalian cells using ruthenium catalysts. Both fully intramolecular and intermolecular cycloadditions of diynes with alkynes are feasible, the latter providing an intracellular synthesis of appealing anthraquinones. The power of the approach is further demonstrated by generating anthraquinone AIEgens (AIE=aggregation induced emission) that otherwise do not go inside cells, and by modifying the intracellular distribution of the products by simply varying the type of ruthenium complex.     

A photoionization study of the charge transfer reactions: Xe+ + O2 → O+2 + Xe and O+2 + Xe → Xe+ + O2

Photoionization mass spectrometer techniques have been employed to study the charge transfer reactions: Xe⁺ + O₂ → O⁺₂ + Xe and O⁺₂ + Xe → Xe⁺ + O₂. The results show the reaction of Xe⁺(²P_{$\text{3}\text{2}$}) ions with O₂ molecules is much more efficient than the reaction of Xe⁺(²P_{$\text{1}\text{2}$}) ions with O₂ molecules. The charge transfer reaction of O⁺₂ ions with Xe atoms was detected for O⁺₂ ions in the a ⁴Π_u state.     

Alkenes in [2+2+2] Cycloadditions

Participation of alkenes and allenes in [2+2+2] cycloaddition reactions has attracted much attention recently. This version of the well‐established alkyne cyclotrimerization renders interesting products, such as cyclohexadienes and other polycycles, through cascade processes. Many mechanistic variations are observed when using certain metal complexes as catalysts. The frequent generation of stereogenic centers has prompted the development of efficient asymmetric versions. This Minireview summarizes the efforts reported to date on the use of double bonds as partners in [2+2+2] cyclotrimerizations.     

Formal [(2+2)+2] and [(2+2)+(2+2)] nonconjugated dienediyne cascade cycloadditions

[reaction: see text] Fluoranthene 2 and heptacycle 3 are easily accessible from the reaction of diyne 1 and norbornadiene (NBD) in the presence of the rhodium catalyst. The unusual [(2+2)+(2+2)] adduct 3 was confirmed by the X-ray crystal structure analysis.     

Studies on Synthetic Inorganic Ion Exchangers-III Quantitative Separations of Mg2+ -Pb2+, Zn2+ - Pb2+ Cu2+ - Pb2+, Al3+ - Pb2+, Zn2+ - Cd2+, and Mg2+ - Cd2+ on Lead Antimonate Columns

Abstract

A new inorganic ion exchanger, lead antimonate has been synthesized having an Pb:Sb ratio of 1:5 and cation exchange capacity of 1.46 mequiv./g. It is fairly stable in water and dilute solutions of acids, bases and salts. Ion distribution studies on twenty metal ions have been determined on this gel at pH 1,2,3 and 5. The following mixtures have been separated: Mg²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Cu²⁺ - Pb²⁺, Al³⁺ - Pb²⁺, Zn²⁺ - Cd²⁺ and Mg²⁺ - Cd²⁺. Mg²⁺ and Al³⁺ were removed with 0.4 M ammonium nitrate, Cu²⁺ and Zn²⁺ with 0.4 M ammonium nitrate + 0.1M nitric acid (1:1), Pb²⁺ with 0.5M nitric acid and Cd²⁺ with 0.25M nitric acid. A tentative structure of this material is proposed on the basis of chemical analysis, pH titrations, thermogravimetry and IR spectrophotometry.     

Tethered 2 + 2 + 2 cycloaddition reactions of cobalt-cycloheptyne complexes

Cycloheptyne-dicobalt hexacarbonyl complexes, substituted by propargylic ether functions, undergo 2 + 2 + 2 cycloaddition reactions with alkynes to give tricyclic benzocycloheptanes; an all-intramolecular version of this transformation is also possible.     

Rhodium‐Catalyzed [3+2+2] and [2+2+2] Cycloadditions of Two Alkynes with Cyclopropylideneacetamides

It has been established that a cationic rhodium(I)/H₈‐binap complex catalyzes the [3+2+2] cycloaddition of 1,6‐diynes with cyclopropylideneacetamides to produce cycloheptadiene derivatives through cleavage of cyclopropane rings. In contrast, a cationic rhodium(I)/(S)‐binap complex catalyzes the enantioselective [2+2+2] cycloaddition of terminal alkynes, acetylenedicarboxylates, and cyclopropylideneacetamides to produce spiro‐cyclohexadiene derivatives which retain the cyclopropane rings.