X射线吸收谱研究碳纳米管内Rh-Mn纳米粒子结构的变化

利用X射线吸收谱技术研究了负载于多壁碳纳米管内的Rh-Mn纳米粒子在不同气氛和温度下的结构. 结果表明,Rh-Mn粒子在空气中是由氧化铑团簇和混合锰氧化物组成. 经过氢气在300 ℃下还原后,混合锰氧化物种转化成MnO. 而氧化铑团簇在He气氛下当温度达到250 ℃时就会发生分解而形成金属铑团簇. 对形成的铑团簇用H₂或CO进行热处理,发现其分散性随温度升高而提高; 同时,X射线吸收谱实验没有观察到Mn和Rh之间存在显著的相互作用,助剂Mn的主要作用是提高了Rh的分散性.     

A functionalized gold nanoparticles and Rhodamine 6G based fluorescent sensor for high sensitive and selective detection of mercury(II) in environmental water samples

A gold-nanoparticles (Au NPs)-Rhodamine 6G (Rh6G) based fluorescent sensor for detecting Hg (II) in aqueous solution has been developed. Water-soluble and monodisperse gold nanoparticles (Au NPs) has been prepared facilely and further modified with thioglycolic acid (TGA). Free Rh6G dye was strongly fluorescent in bulk solution. The sensor system composing of Rh6G and Au NPs fluoresce weakly as result of fluorescence resonance energy transfer (FRET) and collision. The fluorescence of Rh6G and Au NPs based sensor was gradually recovered due to Rh6G units departed from the surface of functionalized Au NPs in the presence of Hg(II). Based on the modulation of fluorescence quenching efficiency of Rh6G-Au NPs by Hg(II) at pH 9.0 of teraborate buffer solution, a simple, rapid, reliable and specific turn-on fluorescent assay for Hg(II) was proposed. Under the optimum conditions, the fluorescence intensity of sensor is proportional to the concentration of Hg(II). The calibration graphs are linear over the range of 5.0 × 10⁻¹⁰ to 3.55 × 10⁻⁸ mol L⁻¹, and the corresponding limit of detection (LOD) is low as 6.0 × 10⁻¹¹ mol L⁻¹. The relative standard deviation of 10 replicate measurements is 1.5% for 2.0 × 10⁻⁹ mol L⁻¹ Hg(II). In comparison with conventional fluorimetric methods for detection of mercury ion, the present nanosensor endowed with higher sensitivity and selectivity for Hg(II) in aqueous solution. Mercury(II) of real environmental water samples was determined by our proposed method with satisfactory results that were obtained by atomic absorption spectroscopy (AAS).     

Enzyme-Compatible Core-Shell Nanoreactor for in Situ H2-Driven NAD(P)H Regeneration

The regeneration of the reduced form cofactor NAD(P)H is essential for the extra-cellular application of bio-reduction, which necessitates not only the development of efficient artificial NAD(P)H regeneration catalytic system but also its well compatibility with the cascade enzymatic reduction system. In this work, we reported the preparation of a metal nanoparticle (NP) and metal complex integrated core-shell nanoreactor for H₂-driven NAD(P)H regeneration through the immobilization of a Rh complex on Ni/TiO₂ surface via a bipyridine contained 3D porous organic polymer (POP). In comparison with the corresponding single component metal NPs and the immobilized Rh complex, the integrated catalyst presented simultaneously enhanced activity and selectivity in NAD(P)H regeneration thanks to the rapid spillover of activated H species from metal NPs to Rh complex. In addition, the size-sieving effect of POP precluded the direct interaction of enzyme and Rh complex confined in the pores, enabling the success coupling of core-shell nanoreactor and aldehyde ketone reductase (AKR) for chemoenzymatic reduction of acetophenone to (R)-1-phenylethan-1-ol. This work provides a strategy for the rational manipulation of multicomponent cooperation catalysis.     

Rhodium nanoparticle catalysts stabilized with a polymer that enhances stability without compromising activity

Rh NPs coated with a PVP-derived polymer, that combines several distinct protective interactions, exhibit superior thermal and catalytic stability compared to analogue NPs coated with PVP.     

Electrochemical method for producing globules of ultrasmall rhodium nanoparticles with poly(N-vinylpyrrolidone) bound to the surface of nanocellulose fibers

The study concerns the preparation of Rh nanoparticles (NPs) by room-temperature, methyl viologen (MV²⁺) mediated electrochemical reduction of RhCl₃ in the presence of poly(N-vinylpyrrolidone) (PVP, 40000 Da) and nanocellulose (NC, d = 57±36 nm) at a controlled potential of generation of MV^·+ radical cations in aqueous medium. When a theoretical amount of electricity is passed, the mediator is not consumed, while Rh^(III) is quantitatively reduced to Rh⁽⁰⁾. The reduction results in the Rh@PVP (141–191 nm in size) and Rh@PVP/NC nanocomposites dispersed in the solution bulk. The Rh@PVP/NC nanocomposite represents PVP globules (42±13 nm in size) with encapsulated ultrasmall spherical Rh NPs (1.3±0.4 nm in size) bound to the surface of NC fibers. The Rh nanocomposites exhibited high catalytic activity in the model reaction, viz., reduction of p-nitrophenol with sodium borohydride in aqueous medium. The catalytic activity increased in the presence of cetyltrimethylammonium chloride (CTAC).

     

Relative stability of icosahedral and cuboctahedral metallic nanoparticles

The size and form of metallic nanoparticles (NPs) significantly affects their adsorptive, chemical, and catalytic activity. One of the most interesting nanoscale size effects is the transition from icosahedral to octahedral forms with growth in the NP size. We compared the stability of icosahedral, decahedral and cuboctahedral NPs made from eight metals Ni, Cu, Rh, Pd, Ag, Ir, Pt, and Au using the local optimization of total energy, which was computed from the tight-binding second moment approximation and quantum Sutton–Chen potentials. The obtained results predicted that the icosahedral form would be most stable for Ni, and least stable for Au. For Rh, and especially for Ir, a strong dependency of the stability of the different forms on the NP size was revealed.     

Viable Photocatalysts under Solar‐Spectrum Irradiation: Nonplasmonic Metal Nanoparticles

Supported nanoparticles (NPs) of nonplasmonic transition metals (Pd, Pt, Rh, and Ir) are widely used as thermally activated catalysts for the synthesis of important organic compounds, but little is known about their photocatalytic capabilities. We discovered that irradiation with light can significantly enhance the intrinsic catalytic performance of these metal NPs at ambient temperatures for several types of reactions. These metal NPs strongly absorb the light mainly through interband electronic transitions. The excited electrons interact with the reactant molecules on the particles to accelerate these reactions. The rate of the catalyzed reaction depends on the concentration and energy of the excited electrons, which can be increased by increasing the light intensity or by reducing the irradiation wavelength. The metal NPs can also effectively couple thermal and light energy sources to more efficiently drive chemical transformations.     

On the electronic structure and hydrogen evolution reaction activity of platinum group metal-based high-entropy-alloy nanoparticles

We report the synthesis of high-entropy-alloy (HEA) nanoparticles (NPs) consisting of five platinum group metals (Ru, Rh, Pd, Ir and Pt) through a facile one-pot polyol process. We investigated the electronic structure of HEA NPs using hard X-ray photoelectron spectroscopy, which is the first direct observation of the electronic structure of HEA NPs. Significantly, the HEA NPs possessed a broad valence band spectrum without any obvious peaks. This implies that the HEA NPs have random atomic configurations leading to a variety of local electronic structures. We examined the hydrogen evolution reaction (HER) and observed a remarkably high HER activity on HEA NPs. At an overpotential of 25 mV, the turnover frequencies of HEA NPs were 9.5 and 7.8 times higher than those of a commercial Pt catalyst in 0.05 M H₂SO₄ and 1.0 M KOH electrolytes, respectively. Moreover, the HEA NPs showed almost no loss during a cycling test and were much more stable than the commercial Pt catalyst. Our findings on HEA NPs may provide a new paradigm for the design of catalysts.

RuRhPdIrPt high-entropy-alloy nanoparticles with a broad and featureless valence band spectrum show high hydrogen evolution reaction activity.     

具有优异甲醇耐受性的Rh掺杂PdCu有序金属间化合物纳米粒子增强氧还原电催化

Direct methanol fuel cells (DMFCs), as one of the important energy conversion devices, are of great interest in the fields of energy, catalysis and materials. However, the application of DMFCs is presently challenged because of the limited activity and durability of cathode catalysts as well as the poisoning issues caused by methanol permeation to the cathode during operation. Herein, we report a new class of Rh-doped PdCu nanoparticles (NPs) with ordered intermetallic structure for enhancing the activity and durability of the cathode for oxygen reduction reaction (ORR) and achieving superior methanol tolerance. The disordered Rh-doped PdCu NPs can be prepared via a simple wet-chemical method, followed by annealing to convert it to ordered phases. The results of transmission electron microscopy (TEM), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), power X-ray diffraction (PXRD) analysis and high resolution TEM (HRTEM) successfully demonstrate the formation of near-spherical NPs with an average size of 6.5 ± 0.5 nm and the conversion of the phase structure. The complete phase transition temperatures of Rh-doped PdCu NPs and PdCu are 500 and 400 ℃, respectively. The molar ratio of Rh/Pd/Cu in the as-synthesized Rh-doped PdCu NPs is 5/48/47. Benefitting from Rh doping and the presence of the ordered intermetallic structure, the Rh-doped PdCu intermetallic electrocatalyst achieves the maximum ORR mass activity of 0.96 A·mg^-1 at 0.9 V versus reversible hydrogen electrode (RHE) under alkaline conditions—a 7.4-fold enhancement compared to the commercial Pt/C catalyst. For different electrocatalysts, the ORR activities follow the sequence, ordered Rh-doped PdCu intermetallics > ordered PdCu intermetallics > disordered Rh-doped PdCu NPs > disordered PdCu NPs > commercial Pt/C catalyst. In addition, the distinct structure endows the Rh-doped PdCu intermetallics with highly stable ORR durability with unaltered half-wave potential (E_1/2) and mass activity after continuous 20000 cycles, which are higher than those of other electrocatalysts. Furthermore, the E_1/2 of the Rh-doped PdCu intermetallics decreases by only 5 mV after adding 0.5 mol·L^-1 methanol to the electrolyte, while the commercial Pt/C catalyst negatively shifts by 235 mV and a distinct oxidation peak can be observed. The results indicate that the ORR activity of the Rh-doped PdCu intermetallic electrocatalyst can be well maintained even in the presence of poisoning environment. Our results have demonstrated that Rh-doped PdCu NPs with ordered intermetallic structures is a potential electrocatalyst toward the next-generation high-performance DMFCs.     

Hybrid amorphous TiO2/polymer nanomaterials trigger apoptosis of pediatric cancer cells upon ultrasound irradiation

Sonodynamic therapy is a cost-effective, minimally invasive and localized anticancer therapy based on the in situ generation of reactive oxygen species by combining low-intensity ultrasound (US), oxygen, and a sonosensitizer and it minimizes systemic toxicity. In this work, we initially study the effect of poly(ethylene oxide)-poly(propylene oxide) (PEO-PPO) block copolymers of different architecture, molecular weight, and hydrophilic-lipophilic balance on the size, size distribution and morphology of hybrid amorphous TiO₂/polymer sono-responsive nanoparticles (NPs) produced by a sol-gel process that comprises the synthesis and aging of a Ti(IV)-acetone oxo-organo complex, its mixing with the PEO-PPO block copolymer and their nanoprecipitation in water. Regardless of the PEO-PPO block copolymer used in the synthesis, the properties of the hybrid NPs are governed by the age of the oxo-organo complex. At the same time, we show the ability to incorporate a variety of amphiphiles with different hydrophilic-lipophilic balance, and thus, different encapsulation capacities of hydrophobic cargos. Morphological analysis by high-resolution–transmission electron microscopy shows that all the NPs are rounded. Next, we demonstrate that these hybrid NPs induce the formation of reactive oxygen species upon irradiation with the therapeutic US. In addition, they exhibit good compatibility and uptake by the Rh30 cell line, a model of rhabdomyosarcoma (a pediatric tumor of connective tissue) and do not cause significant hemolysis upon exposure of up to 24 h. Finally, we investigate the pathway by which these nanomaterials kill Rh30 cells by using annexin-V/propidium iodide staining and flow cytometry and demonstrate that, upon US induction, they trigger cell apoptosis. To the best of our knowledge, this is the first work reporting on the sono-responsive performance of an amorphous TiO₂-based nanomaterial and its potential application in the sonodynamic therapy of cancer.     

Evaluation of potential antioxidant and effect of biomimetic nanoscale silver particles on opportunistic fungi

Green approach for tailoring quasi spherical Ag nanoparticles (NPs) from leave (L) and rhizome (Rh) of Alpinia Calcarata (AC) was explored due to increasing demand for eco-friendly, efficient, and cost effect antioxidant/antifungal agents. The fabricated Ag particles depicted dose dependence of activities. DPPH radical scavenging rate was about 69.57% and 77.1% at 1.85 × 10^?2 M Ag NPs ACL and Ag NPS ACRh respectively which are attributed to simultaneous activity of surface coverage and small Ag particles. Furthermore, disc-diffusion studies revealed remarkable comparable inhibitory effects of the synthesized Ag NPs ACL and Ag NPS ACRh on all the tested MTCC-4878, MTCC-1811, MTCC-7880 fungi.     

基于泡沫铜的多孔碳均匀负载Cu3P纳米颗粒的制备及其光催化降解染料性能北大核心CSCD

为了开发活性高、易回收的光催化剂,采用多步热解法制备了基于泡沫铜的多孔碳均匀负载Cu_(3)P纳米颗粒。在泡沫铜(FC)基底原位生长铜基金属-有机框架晶态材料(Cu-MOF),通过热解处理使得泡沫铜表面覆盖了均匀负载于碳材料的Cu_(2)O/Cu纳米颗粒(Cu_(2)O/Cu@NPC@FC-400)。对该材料进行磷化处理得到目标光催化剂Cu_(3)P@NPC@FC-400。利用X射线粉末衍射(XRD)、傅里叶变换红外光谱(FT-IR)、紫外-可见漫散射光谱(UV-Vis DRS)、X射线光电子能谱(XPS)和扫描电子显微镜(SEM)等表征材料的组成和形貌。以罗丹明B(Rh B)溶液作为模拟废水,探究其光催化性能及机理。结果发现,Cu_(3)P@NPC@FC-400材料对罗丹明B染料具有良好的光催化性能,在3 h内染料去除率可达94%。该材料便于回收,循环利用10次后,光催化活性保持不变。此外,该材料对于含有7种染料的复杂体系也具有优异的光降解性能。该催化剂具有稳定性高、回收简便的优势,可用于处理含有多种染料的废水。     

CO oxidation on inverse CeO(x)/Cu(111) catalysts: high catalytic activity and ceria-promoted dissociation of O2

A Cu(111) surface displays a low activity for the oxidation of carbon monoxide (2CO + O(2) → 2CO(2)). Depending on the temperature, background pressure of O(2), and the exposure time, one can get chemisorbed O on Cu(111) or a layer of Cu(2)O that may be deficient in oxygen. The addition of ceria nanoparticles (NPs) to Cu(111) substantially enhances interactions with the O(2) molecule and facilitates the oxidation of the copper substrate. In images of scanning tunneling microscopy, ceria NPs exhibit two overlapping honeycomb-type moire? structures, with the larger ones (H(1)) having a periodicity of 4.2 nm and the smaller ones (H(2)) having a periodicity of 1.20 nm. After annealing CeO(2)/Cu(111) in O(2) at elevated temperatures (600-700 K), a new phase of a Cu(2)O(1+x) surface oxide appears and propagates from the ceria NPs. The ceria is not only active for O(2) dissociation, but provides a much faster channel for oxidation than the step edges of Cu(111). Exposure to CO at 550-750 K led to a partial reduction of the ceria NPs and the removal of the copper oxide layer. The CeO(x)/Cu(111) systems have activities for the 2CO + O(2) → 2CO(2) reaction that are comparable or larger than those reported for surfaces of expensive noble metals such as Rh(111), Pd(110), and Pt(100). Density-functional calculations show that the supported ceria NPs are able to catalyze the oxidation of CO due to their special electronic and chemical properties. The configuration of the inverse oxide/metal catalyst opens new interesting routes for applications in catalysis.     

Hydrogenation studies involving halobis(phosphine)-rhodium(I) dimers: use of parahydrogen induced polarisation to detect species present at low concentration

Reaction of [RhCl(PPh3)2]2 with parahydrogen revealed that the binuclear dihydride [Rh(H)2(PPh3)2mu-Cl)2Rh(PPh3)2] and the tetrahydride complex [Rh(H)2(PPh3)2(mu-Cl)]2 are readily formed. While magnetisation transfer from free H2 into both the hydride resonances of the tetrahydride and [Rh(H)2Cl(PPh3)3] is observable, neither transfer into [Rh(H)2(PPh3)2(mu-Cl)2Rh(PPh3)2] nor transfer between the two binuclear complexes is seen. Consequently [Rh(H)2(PPh3)2(mu-Cl)]2 and [Rh(H)2(PPh3)2(mu-Cl)2Rh(PPh3)2] are not connected on the NMR timescale by simple elimination or addition of H2. The rapid exchange of free H2 into the tetrahydride proceeds via reversible halide bridge rupture and the formation of [Rh(H)2(PPh3)2(mu-Cl)RhCl(H)2(PPh3)2]. When these reactions are examined in CD2Cl2, the formation of the solvent complex [Rh(H)2(PPh3)2(mu-Cl)2Rh(CD2Cl2)(PPh3)] and the deactivation products [Rh(Cl)(H)PPh3)2(mu-Cl)(mu-H)Rh(Cl)(H)PPh3)2] and [Rh(Cl)(H)(CD2Cl2)(PPh3)(mu-Cl)(mu-H)Rh(Cl)(H)PPh3)2] is indicated. In the presence of an alkene and parahydrogen, signals corresponding to binuclear complexes of the type [Rh(H)2(PPh3)2(mu-Cl)(2)(Rh)(PPh3)(alkene)] are detected. These complexes undergo intramolecular hydride interchange in a process that is independent of the concentration of styrene and catalyst and involves halide bridge rupture, followed by rotation about the remaining Rh-Cl bridge, and bridge re-establishment. This process is facilitated by electron rich alkenes. Magnetisation transfer from the hydride ligands of these complexes into the alkyl group of the hydrogenation product is also observed. Hydrogenation is proposed to proceed via binuclear complex fragmentation and trapping of the resultant intermediate [RhCl(H)2PPh3)2] by the alkene. Studies on a number of other binuclear dihydride complexes including [(H)(Cl)Rh(PMe3)2(mu-H)(mu-Cl)Rh(CO)(PMe3)], [(H)2Rh(PMe3)2(mu-Cl)2Rh(CO)(PMe3)] and [HRh(PMe3)2(mu-H)(mu-Cl)2Rh(CO)(PMe3)] reveal that such species are able to play a similar role in hydrogenation catalysis. When the analogous iodide complexes [RhIPPh3)2]2 and [RhI(PPh3)3] are examined, [Rh(H)2(PPh3)2(mu-I)2Rh(PPh3)2], [Rh(H)2(PPh3)2(mu-I)]2 and [Rh(H)2I(PPh3)3] are observed in addition to the corresponding binuclear alkene-dihydride products. The higher initial activity of these precursors is offset by the formation of the trirhodium phosphide bridged deactivation product, [[(H)(PPh3)Rh(mu-H)(mu-I)(mu-PPh2)Rh(H)(PPh3)](mu-I)2Rh(H)2PPh3)2]     

Synthesis and electrochemistry of new Rh-centered and conjuncto rhodium carbonyl clusters. X-ray structure of [NEt(4)](3)[Rh(15)(CO)(27)], [NEt(4)](3)[Rh(15)(CO)(25)(MeCN)(2)] x 2MeCN, and [NEt(4)](3)[Rh(17)(CO)(37)

A reinvestigation of the redox chemistry of [Rh7(CO)16]3- resulted in the finding of new alternative syntheses for a series of previously reported Rh-centered carbonyl clusters, i.e., [H4-nRh14(CO)25]n- (n = 3 and 4) and [Rh17(CO)30]3-, as well as new species such as a different isomer of [Rh15(CO)27]3-, the carbonyl-substituted [Rh15(CO)25(MeCN)2]3-, and the conjuncto [Rh17(CO)37]3- clusters. All of the above clusters are suggested to derive from oxidation of [Rh7(CO)16]3- with H+, arising from dissociation either of [M(H2O)n]2+ aquo complexes or nonoxidizing acids. The nature of the previously reported species has been confirmed by IR, electrospray ionization mass spectrometry, and complete X-ray diffraction studies. Only the molecular structures of the new clusters are reported in some details. The ready conversion of [Rh7(CO)16]3- in [HRh14(CO)25]3- upon oxidation has been confirmed by electrochemical techniques. In addition, electrochemical studies point out that the close-packed [H3Rh13(CO)24]2- dianion undergoes a reversible monoelectronic reduction followed by an irreversible reduction. The irreversibility of the second reduction is probably a consequence of H2 elimination from a purported [H3Rh13(CO)24]4- species. Conversely, the body-centered-cubic [HRh14(CO)25]3- and [Rh15(CO)27]3- trianions display several well-defined redox changes with features of electrochemical reversibility, even at low scan rate. The major conclusion of this work is that mild experimental conditions and a tailored oxidizing reagent may enable more selective conversion of [Rh7(CO)16]3- into a higher-nuclearity rhodium carbonyl cluster. It is also shown that isonuclear Rh clusters may display isomeric metal frameworks [i.e., [Rh15(CO)27]3-], as well as almost identical metal frames stabilized by a different number of carbonyl groups [i.e., [Rh15(CO)27]3- and [Rh15(CO)30]3-]. Other isonuclear Rh clusters stabilized by a different number of CO ligands more expectedly exhibit completely different metal geometries [i.e., [Rh17(CO)30]3- and [Rh17(CO)37]3-]. The first pair of isonuclear and isoskeletal clusters is particularly astonishing in that [Rh15(CO)30]3- features six valence electrons more than [Rh15(CO)27]3-. Finally, the electrochemical studies seem to suggest that interstitial Rh atoms are less effective than Ni and Pt interstitial atoms in promoting redox properties and inducing molecular capacitor behavior in carbonyl clusters.     

RgCo双金属催化剂的研究IV. Rh2Co2/Al2O3上的吸附中心类型及吸附性能

利用CO和NO作为双探针分子对Rh2Co2/Al2O3的吸附中心类型和吸附性能进行了详细的研究。结果表明Rh2Co2/Al2O3上存在Rh上的孪生和桥式CO吸附中心以及Co上的线式CO吸附中心。其中Rh上的孪生和桥式CO吸附中心对CO和NO的吸附性能与Rh4/Al2O3上的孪生和桥式CO中心相似。Co上的线式CO吸附中心以预吸附的CO能被NO取代, 预吸附的NO不能被CO取代而区别于Rh4/Al2O3上的Rh的线式CO吸附中心; 又以既能吸附CO又能吸附NO而不同于Co2/Al2O3和Rh+Co/Al2O3上的Co中心。与母体簇的结构相关联, 表明H2还原后的Rh2Co2/Al2O3上Rh2Co2(CO)12簇结构仍保持, 且Rh-Co相互作用强。     

银掺杂介孔氧化铝抗菌剂的一步合成与表征

以Al(NO_3)_3·9H_2O和AgNO_3为原料,采用水热法制备了介孔氧化铝纳米粒子(Mesoporous Al_2O_3NPs)和银掺杂介孔氧化铝纳米粒子(Mesoporous Ag/Al_2O_3NPs),通过X射线衍射(XRD)、场发射扫描电子显微镜(FE-SEM)、X射线荧光光谱(XRF)、能量分散X射线衍射(EDX)和低温N2吸附-脱附等手段对产物进行了表征,通过最低抑菌浓度和抑菌圈实验研究了材料的抗菌性能.XRD分析表明在介孔Ag/Al_2O_3NPs中Al_2O_3是唯一结晶相,Ag掺杂后,介孔Ag/Al_2O_3NPs晶格常数和半高峰宽增大,晶面间距[(111),(400)和(440)面]减小.FE-SEM形貌分析表明掺杂后的介孔Ag/Al_2O_3NPs颗粒直径减小而孔径增大.EDX和XRF分析表明介孔Ag/Al_2O_3NPs中O/Al摩尔比为1.5,与Al_2O_3NPs中O/Al摩尔比相同.综合XRD和XRF分析结果认为,Ag进入介孔Al_2O_3晶格间隙形成间隙固溶体.低温N2吸附-脱附分析表明掺杂后的介孔Ag/Al_2O_3NPs比表面积、孔体积和孔径增大.曝气抗菌实验结果表明介孔Ag/Al_2O_3NPs的抗菌机理是活性氧和金属银的协同作用.介孔Ag/Al_2O_3NPs对革兰氏阴性菌(大肠杆菌)和革兰氏阳性菌(金黄色葡萄球菌)具有明显的抗菌效果,对大肠杆菌和金黄色葡萄球菌的最低抑菌浓度(MIC)均为80μg/m L,抑菌圈直径分别为26 mm和24 mm.     

Recognition of DNA base pair mismatches by a cyclometalated Rh(III) intercalator

Two cyclometalated complexes of Rh(III), rac-[Rh(ppy)2chrysi]+ and rac-[Rh(ppy)2 phi]+, have been synthesized and characterized with respect to their binding to DNA. The structure of rac-[Rh(ppy)2 phi]Cl.H2O.CH2Cl2 has been determined by X-ray diffraction (monoclinic, P2(1)/c, Z = 4, a = 18.447(3) A, b = 9.770(1) A, c = 17.661(3) A, beta = 94.821(11) degrees, V = 3172.0(8) A3) and reveals that the complex is a distorted octahedron with nearly planar ligands, similar in structure to the DNA mismatch recognition agent [Rh(bpy)2chrysi]3+. The 2-phenylpyridyl nitrogen atoms are shown to be in the axial positions, as a result of trans-directing effects. This tendency simplifies the synthesis and purification of such complexes by limiting the number of possible isomers generated. The abilities of [Rh(ppy)2chrysi]+ and [Rh(ppy)2 phi]+ to bind and, with photoactivation, to cleave DNA have been demonstrated in assays on duplex DNA in the absence and presence of a single CC mismatch. [Rh(ppy)2chrysi]+ was shown upon photoactivation to cleave DNA selectively at the base pair mismatch whereas [Rh(ppy)2 phi]+ cleaves B-DNA nonspecifically. The reactivity of [Rh(ppy)2chrysi]+ was also compared to that of the known mismatch recognition agent [Rh(bpy)2chrysi]3+. Competitive photocleavage studies revealed that a 14-fold excess of [Rh(ppy)2chrysi]+ was required to achieve the same level of binding as that of [Rh(bpy)2chrysi]3+. However, the ratio of damage induced by [Rh(bpy)2chrysi]3+ to that induced by [Rh(ppy)2chrysi]+ is considerably greater than this value, indicating that decreased photoefficiency for the cyclometalated complex must contribute to its significantly attenuated photoreactivity. These cyclometalated intercalators provide the starting points for the design of a new family of metal complexes targeted to DNA.     

Preparation and cell response of bio-mineralized Fe3O4 nanoparticles

Silk fibroin (SF)-coated Fe(3)O(4) nanoparticles (NPs) with good superparamagnetism were successfully prepared via a bio-mineralization process at room temperature. Two cell tests revealed that mineralized SF-coated Fe(3)O(4) NPs presented good cytocompatibility for L929 and osteoblast cells and higher cell density after 5 d with high concentrations of SF-coated Fe(3)O(4) NPs (up to 0.5 mg/mL). These resulted from SF surface coating on NPs, nano-surface morphology and iron ion release of Fe(3)O(4) NPs. The mineralized SF-coated Fe(3)O(4) NPs could be envisioned for various bone orthopedic and therapeutic applications, in which SF-coated NPs location is controlled through an external magnetic field to promoted bone growth.     

Structural chemistry of "defect" cyanometalate boxes: (Cs subset [CpCo(CN)3]4[Cp*Ru]3) and (M subset [Cp*Rh(CN)3]4[Cp*Ru]3) (M = NH4, Cs)

A series of heptametallic cyanide cages are described; they represent soluble analogues of defect-containing cyanometalate solid-state polymers. Reaction of 0.75 equiv of [Cp*Ru(NCMe)3]PF6, Et(4)N[Cp*Rh(CN)3], and 0.25 equiv of CsOTf in MeCN solution produced (Cs subset [CpCo(CN)3]4[Cp*Ru]3)(Cs subset Rh4Ru3). 1H and 133Cs NMR measurements show that Cs subset Rh4Ru3 exists as a single Cs isomer. In contrast, (Cs subset [CpCo(CN)3]4[Cp*Ru]3) (Cs subset Co4Ru3), previously lacking crystallographic characterization, adopts both Cs isomers in solution. In situ ESI-MS studies on the synthesis of Cs subset Rh4Ru3 revealed two Cs-containing intermediates, Cs subset Rh2Ru2+ (1239 m/z) and Cs subset Rh3Ru3+ (1791 m/z), which underscore the participation of Cs+ in the mechanism of cage formation. 133Cs NMR shifts for the cages correlated with the number of CN groups bound to Cs+: Cs subset Co4Ru4+ (delta 1 vs delta 34 for CsOTf), Cs subset Rh4Ru3 where Cs+ is surrounded by ten CN ligands (delta 91), Cs subset Co4Ru3, which consists of isomers with 11 and 10 pi-bonded CNs (delta 42 and delta 89, respectively). Although (K subset [Cp*Rh(CN)3]4[Cp*Ru]3) could not be prepared, (NH4 subset [Cp*Rh(CN)3]4[Cp*Ru]3) (NH4 subset Rh4Ru3) forms readily by NH4+-template cage assembly. IR and NMR measurements indicate that NH4+ binding is weak and that the site symmetry is low. CsOTf quantitatively and rapidly converts NH4 subset Rh4Ru3 into Cs subset Rh4Ru3, demonstrating the kinetic advantages of the M7 cages as ion receptors. Crystallographic characterization of CsCo4Ru3 revealed that it crystallizes in the Cs-(exo)1(endo)2 isomer. In addition to the nine mu-CN ligands, two CN(t) ligands are pi-bonded to Cs+. M subset Rh4Ru3 (M = NH4, Cs) crystallizes as the second Cs isomer, that is, (exo)2(endo)1, wherein only one CN(t) ligand interacts with the included cation. The distorted framework of NH4 subset Rh4Ru3 reflects the smaller ionic radius of NH4+. The protons of NH4+ were located crystallographically, allowing precise determination of the novel NH4...CN interaction. A competition experiment between calix[4]arene-bis(benzocrown-6) and NH4 subset Rh4Ru3 reveals NH4 subset Rh4Ru3 has a higher affinity for cesium.