Electrochemical and in situ SERS spectroelectrochemical investigations of 4‐methyl‐4H‐1, 2, 4‐triazole‐3‐thiol monolayers at a silver electrode

Electrochemically anticorrosive behavior of 4‐methyl‐4H‐1, 2, 4‐triazole‐3‐thiol (MTTL) self‐assembled monolayers (SAMs) on the silver electrode was studied by means of electrochemical impedance spectroscopy (EIS) and polarization measurements. The promising inhibition effect of the MTTL for silver had been affirmed. Results of surface‐enhanced Raman scattering (SERS) experiments indicated that the MTTL molecule in a tilted orientation was self‐assembled on the silver surface through S⁶ and N² atoms to form monolayers. An in situ electrochemical SERS experiment implied the changes of adsorption fashion of MTTL momolayers on the silver surface with the potential shifted to more negative direction. Copyright © 2009 John Wiley & Sons, Ltd.     

2-Amino-5-(4-pyridinyl)-1,3,4-thiadiazole film at the silver surface: Observation by Raman spectroscopy and electrochemical methods

Surface enhanced Raman scattering (SERS) spectrum of the 2-amino-5-(4-pyridinyl)-1,3,4-thiadiazole (4-APTD) on the silver surface was recorded and assigned with the help of B3LYP/6-311G** method. SERS result explored that 4-APTD molecule with a tilted orientation anchored at the silver surface via N¹², S¹ and C² atoms. In situ SERS spectroelectrochemical experiment indicated 4-APTD molecule experienced an intermediate adsorption process of its thiadiazole ring moiety with the vertical orientation at the surface before the 4-APTD molecule detached completely from the surface as the potential applied at −1.3 V vs. SCE. Electrochemical impedance spectroscopy (EIS) and polarization experiments exhibited the sound anticorrosive effect of the 4-APTD film on silver surface with an efficiency of 89.5%.     

介质pH对银基上4-甲基-4H-3-巯基-1,2,4-三氮唑成膜结构和缓蚀性能影响的SERS和电化学研究

在不同pH介质中,缓蚀试剂4-甲基-4H-3-巯基-1,2,4-三氮唑(4-MTTL)都能在银基底上形成自组装膜。SERS光谱表明:当pH=3时,4-MTTL分子是以硫醇式,通过两个氮原子为吸附位点,以较平躺方式在银表面构筑自组装膜;当介质为pH=7和pH=11时,4-MTTL以硫醇式,通过氮和硫原子为吸附位点倾斜或垂直方式作用于银表面。由于后者的吸附方式比前者更为垂直于表面,所以形成的膜中分子排列更为致密。电化学极化实验也表明,在pH=3的条件下,形成的4-MTTL单层有更正的腐蚀电位;在pH=11时,构筑的膜缓蚀能力强于pH=7的。并由电化学交流阻抗数据解析了相应的缓蚀机理。     

pH‐dependent surface‐enhanced Raman scattering observation of sulfanilamide on the silver surface

Monolayers of sulfanilamide on metallic surface can serve as an ideal model for understanding the interaction mechanism between the metal and the sulfanilamide molecule. In the present paper, the surface‐enhanced Raman scattering (SERS) technique was employed to obtain the SERS spectra of sulfanilamide monolayers formed on the silver surface under different pH values. Assignments of the spectra were carried out with the aid of density functional theory (DFT) calculations (BLYP/6‐311G). It can be found that the adsorption function of sulfanilamide on the silver surface was influenced by the pH value. The fully protonated sulfanilamide molecule adsorbed on the silver surface through N¹³H₂ group and the benzene ring anchored in a relatively perpendicular manner leading to N⁷H₂ and S¹⁰O₂ groups near the surface, while the completely deprotonated sulfanilamide molecule attached on the silver surface via N⁷H₂ and the benzene ring was perpendicular to, and the N¹³H₂ and S¹⁰O₂ groups were far from the silver surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Modification of Au surfaces using new ferrocene derivatives

Gold surfaces have been modified by self-assembled techniques. Here the adsorption time of diasteroisomers (1R, 3S)-1-ferrocenyl-3-methyl-4,4-diphenyl-2,5-dioxacyclopentane and (1S, 3S)-1-ferrocenyl-3-methyl-4,4-diphenyl-2,5-dioxacyclopentane (Scheme 1, 3a and 3b) at a Au surface in ethanol solution was controlled. This study was followed by electrochemical impedance spectroscopy (EIS) and X-ray photoelectron spectroscopy (XPS) analysis. The method used for the surface modification was the control of exposure time of a Au surface in the modifier/ethanol solution. It was demonstrated by EIS and XPS that the Au surface was modified with mixture of compounds 3a + 3b, avoiding the electron transference in the interface. It was also observed that the organometallic molecule indeed had been adsorbed on the Au surface. In addition, evidence seems to conclude that the molecule-Au interaction is through the electrons of cyclopentadienyl moiety, where the oxygen atoms are near the air-molecule interface and the iron atom is near the Au surface. This type of interaction of the ferrocene derivatives with gold surfaces has not been reported by any other author.     

The different self-assembled way of n- and t-dodecyl mercaptan on the surface of copper

The self-assembled monolayers (SAMs) of n- and t-dodecyl mercaptan on the surface of copper have been obtained. As evidenced by electrochemical impedance spectroscopy (EIS), two kinds of the alkanethiols can self-assemble on the copper surface. But the results of the quartz crystal microbalance (QCM) show that the self-assembled way of the two alkanethiols are different. The SAMs of n-dodecyl mercaptan can increase the weight of the QCM electrode and the SAMs of t-dodecyl mercaptan, on the contrary, make the weight of the QCM electrode decrease. Inspected with the SEM, it is found that a lot of pits spread all over the copper surface after having been modified with t-dodecyl mercaptan. All the results suggest that the self-assemble of t-dodecyl mercaptan on the copper surface can erode and dissolve copper surface sharply.     

Adsorption study of 4‐MBA on TiO2 nanoparticles by surface‐enhanced Raman spectroscopy

In this paper, the adsorption of 4‐mercaptobenzoic acid (4‐MBA) on TiO₂ nanoparticles was studied mostly by surface‐enhanced Raman spectroscopy (SERS) and UV‐vis spectroscopy, at different pH values as well as under different temperatures and concentrations. The results show that the 4‐MBA molecules are bonded to the TiO₂ surface both through the sulfur atoms and COO⁻ groups at neutral or alkaline pH, but only through the sulfur atom at acidic pH. Furthermore, the 4‐MBA molecules possess high adsorptive stability on TiO₂ at a comparatively high temperature (150 °C). Concentration‐dependent SERS experiments show that the saturation concentration for 4‐MBA adsorbed on TiO₂ is about 10⁻³ M in natural case (pH = 6). Copyright © 2009 John Wiley & Sons, Ltd.     

Corrosion behaviour of AISI 304 stainless steel with Cu coatings in H2SO4

The work addresses the influence of cementation and electrodeposition of copper coatings on the corrosion resistance of AISI 304 stainless steel immersed in 30 wt.% H₂SO₄ at temperatures of 25 and 50 °C. Corrosion process was evaluated by gravimetric tests, DC measurements and electrochemical impedance spectroscopy (EIS). The specimen surfaces were analysed by scanning electron microscopy, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction. The corrosion performance of AISI 304 stainless steel in sulphuric acid solution was greatly improved by copper coatings. The amount of copper deposited by the cementation process was sufficient to protect the stainless steel of corrosion. A greater amount of copper obtained by electrodeposition treatments does not supply further improvement in the corrosion behaviour. The improved corrosion resistance is related to copper dissolution at the initial stages of immersion tests and the presence of Cu²⁺ in the solution, which makes the medium more oxidizing, increasing the stability of the passive layer. In addition, the presence of copper at the surface reduces the overpotential of cathodic reaction, enabling the transition from an active region to the passive one.     

Effect of copper ions implantation on corrosion behavior of zircaloy-4 in 1 M H2SO4

In order to study the effect of copper ion implantation on the aqueous corrosion behavior, samples of zircaloy-4 were implanted with copper ions with fluences ranging from 1 × 10¹⁶ to 1 × 10¹⁷ ions/cm², using a metal vapor vacuum arc source (MEVVA) operated at an extraction voltage of 40 kV. The valence states and depth distributions of elements in the surface layer of the samples were analyzed by X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES), respectively. Glancing angle X-ray diffraction (GAXRD) was employed to examine the phase transformation due to the copper ion implantation. The potentiodynamic polarization technique was employed to evaluate the aqueous corrosion resistance of implanted zircaloy-4 in a 1 M H₂SO₄ solution. It was found that a significant improvement was achieved in the aqueous corrosion resistance of zircaloy-4 implanted with copper ions when the fluence is smaller than 5 × 10¹⁶ ions/cm². The corrosion resistance of implanted samples declined with increasing the fluence. Finally, the mechanism of the corrosion behavior of copper-implanted zircaloy-4 was discussed.     

The electrochemical reduction of CO2 on a copper electrode in 1‐n‐butyl‐3‐methyl imidazolium tetrafluoroborate (BMI.BF4) monitored by surface‐enhanced Raman scattering (SERS)

The electrochemical conversion of CO₂ into value‐added products using room temperature ionic liquids as solvent/electrolyte has been proposed as an alternative to minimize the environmental effects of CO₂ emissions. A key issue in the design of electrochemical systems for the reduction of CO₂ is the in situ identification of intermediate surface species as well as reaction products. Copper electrodes, besides being used as cathodes in the electrochemical reduction of CO₂, present surface‐enhanced Raman scattering (SERS) when properly activated. In this sense, the electrochemical reduction of CO₂ over a copper electrode in the room temperature ionic liquids 1‐n‐butyl‐3‐methyl imidazolium tetrafluoroborate (BMI.BF₄) was investigated by cyclic voltammetry and by in situ SERS. The cyclic voltammetries have shown that the presence of CO₂ on the BMI.BF₄ anticipates the reduction of BMI⁺ to the corresponding carbene. Fourier‐transform‐SERS spectra excited at 1064 nm and SERS spectra excited at 632.8 nm have shown vibrational signals from adsorbed CO. These SERS results indicated that CO adsorbs on the copper surface at two different surface sites. The observation of a 2275 cm⁻¹ vibration in the SERS spectra also confirmed the presence of chemically adsorbed CO₂. Other products of CO₂ reduction in BMI.BF₄, besides CO, were identified, including BMI carbene and the BMI‐CO₂ adduct. The SERS results also suggest that the presence of a thin film of Cu₂O on the copper surface anticipates the reduction of CO₂ to CO, an important component of syngas. Copyright © 2016 John Wiley & Sons, Ltd.     

Surface‐enhanced Raman spectroscopy of 4‐tert‐butylpyridine on a silver electrode

We report the observation of large surface‐enhanced Raman scattering (SERS) (10⁶) for 4‐tert‐butylpyridine molecules adsorbed on a silver electrode surface in an electrochemical cell with electrode potential set at − 0.5 V. A decrease in electrode potential to − 0.3 V was accompanied by a decrease in relative intensities of the vibrational modes. However, there were no changes in vibrational wavenumbers. Comparison of both normal solution Raman and SERS spectra shows very large enhancement of the intensities of a₁, a₂, and b₂ modes at laser excitation of 488 nm. Enhancement of the non‐totally symmetric modes indicates the presence of charge transfer as a contributor to the enhancement. Copyright © 2011 John Wiley & Sons, Ltd.     

Influence of ferric iron on the electrochemical behavior of pyrite

The electrochemical behavior of a pyrite electrode in a sulfuric acid solution with different concentrations of ferric iron (Fe³⁺) was investigated using electrochemical techniques including measurements of open circuit potential, cyclic voltammetry, Tafel polarization curves and electrochemical impedance spectroscopy (EIS). The results show that the pyrite oxidation process takes place via a two-step reaction at the interface of the pyrite electrode and the electrolyte, and that a passivation film composed of elemental sulfur, polysulfides, and metal-deficient sulfide is formed during the process of the first-step reaction. Ferric iron plays an important role in the dissolution of pyrite by enhancing the direct oxidation. The Tafel polarization curves indicate that the polarization current of the pyrite electrode increases with an increase in Fe³⁺ concentration. It has also been shown that the higher concentration of Fe³⁺, the more easily the pyrite can be transformed into the passivation region. Moreover, the EIS response is found to be sensitive to changes in Fe³⁺ concentration.     

Effect of Pb2+ on L‐glutathione monolayers on a silver surface investigated by surface‐enhanced Raman scattering spectroscopy

Surface‐enhanced Raman scattering (SERS) spectroscopy was applied to observe reduced L ‐glutathione [L‐Glut(R)] molecules self‐assembled on a silver surface and the effect of Pb²⁺ on them. The adsorption structure suggests that the mercapto group of the L‐Glut(R) molecule is covalently bonded to the silver surface along with the imine group, amino group and entire carboxyl group in a perpendicular orientation after self‐reorganization. Results of SERS experiment show that Pb²⁺ influences the structure of L‐glutathione monolayers as a result of the binding reaction possibly occurring between Pb²⁺ and the carboxyl and the amino groups. Copyright © 2009 John Wiley & Sons, Ltd.     

Influence of differential stress on the galvanic interaction of pyrite–chalcopyrite

The effect of stress action on pyrite–chalcopyrite galvanic corrosion was investigated using polarization curves and electrochemical impedance spectroscopy (EIS) measurements. When stress increased from 0 to 4?×?10⁵ Pa, the corrosion current density of pyrite–chalcopyrite increased from 5.678 to 6.719 μA cm^?2, and the corrosion potential decreased from 281.634 to 270.187 mV, accompanied by a decrease in polarization resistance from 25.09 to 23.79 Ω·cm². EIS results show there have three time constants in the Nyquist diagrams, which indicated the presence of different steps during the corrosion process. Stress dramatically enhanced pyrite–chalcopyrite galvanic corrosion by affecting the Cu_1???x Fe_1???y S₂ film and the double layer, whereas had little impact on the adsorption species. When the stress changed from 0 to 4?×?10⁵ Pa, the pore resistance and capacitance of the Cu_1???x Fe_1???y S₂ film, R _p and Q _p, changed by 25.72 and 72.28 %, respectively. The adsorption species resistance, R _sl, and capacitance, Q _sl, only changed by 9.77 and 2.31 %, respectively.     

Conformational order of n-dodecanethiol and n-dodecaneselenol monolayers on polycrystalline copper investigated by PM-IRRAS and SFG spectroscopy

Self-assembled monolayers (SAMs) of n-dodecanethiol (C₁₂H₂₅SH) and n-dodecaneselenol (C₁₂H₂₅SeH) on polycrystalline copper have been elaborated with the purpose of achieving densely packed and crystalline-like assemblies. By combining the surface sensitivity of polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) and sum-frequency generation spectroscopy (SFG), the effect of the self-assembly time (15 min, 30 min, 1 h, 2 h and 24 h) on the formation of n-dodecanethiol and n-dodecaneselenol monolayers on untreated and electrochemically reduced polycrystalline copper has been investigated. On electrochemically reduced copper, PM-IRRAS spectroscopy shows that both molecules are able to form well organized layers. SFG spectroscopy indicates that the C₁₂H₂₅SeH SAMs are slightly better ordered than those achieved with C₁₂H₂₅SH. On untreated copper, the two molecules lead to different film organizations. Both PM-IRRAS and SFG indicate that C₁₂H₂₅SH SAMs are of the same film quality as those obtained on electrochemically reduced copper. On the contrary, C₁₂H₂₅SeH monolayers are invariably poorly organized at the molecular level.     

Comparison of SERS effectiveness of copper substrates prepared by different methods: what are the values of enhancement factors?

Surface‐enhanced Raman scattering (SERS) spectroscopy is an analytical method for the detection of low amounts of analytes adsorbed on an appropriate coinage metal (Au, Ag, Cu) surface. Generally, the values of the enhancement factor are the highest on silver, lower on gold and relatively very low on copper. In this study, we have focused on the estimation of the enhancement factors of copper surface/substrates formed by different preparation procedures. The SERS activity of large electrochemically prepared substrates and colloidal systems is compared. The surface morphology of the large substrates was studied using scanning electron microscopy and atomic force microscopy. The size distribution of colloidal nanoparticles was monitored by dynamic light scattering. The values of enhancement factor are in both cases more than 10⁵ for the FT‐SERS spectra, demonstrating the fundamental role of nanostructured copper as a substrate material at the excitation wavelength (1064 nm) used. Copyright © 2011 John Wiley & Sons, Ltd.     

Silver-coated LiVPO4F composite with improved electrochemical performance as cathode material for lithium-ion batteries

Nano-structured LiVPO₄F/Ag composite cathode material has been successfully synthesized via a sol–gel route. The structural and physical properties, as well as the electrochemical performance of the material are compared with those of the pristine LiVPO₄F. X-ray diffraction (XRD) and scanning electron microscopy (SEM) reveal that Ag particles are uniformly dispersed on the surface of LiVPO₄F without destroying the crystal structure of the bulk material. An analysis of the electrochemical measurements show that the Ag-modified LiVPO₄F material exhibits high discharge capacity, good cycle performance (108.5 mAh g⁻¹ after 50th cycles at 0.1 C, 93% of initial discharge capacity) and excellent rate behavior (81.8 mAh g⁻¹ for initial discharge capacity at 5 C). The electrochemical impedance spectroscopy (EIS) results reveal that the adding of Ag decreases the charge-transfer resistance (R_ct) of LiVPO₄F cathode. This study demonstrates that Ag-coating is a promising way to improve the electrochemical performance of the pristine LiVPO₄F for lithium-ion batteries cathode material.     

N-甲基咪唑与2,2'-联吡啶在铜表面共吸附的SERS研究

采用电化学现场表面增强拉曼光谱(SERS)分别研究了非水体系中N-甲基咪唑(NMIM),2,2’-联吡啶(2,2-’bipy)在铜电极表面的吸附行为以及两者的共吸附行为。结果表明在非水体系中,NMIM可在很宽的电位区间内稳定地吸附在金属表面,而2,2-’bipy在一个相对较窄的电位区间内能稳定地吸附在金属表面。当两者共存时存在竞争吸附和共吸附行为,较负的电位下主要以NMIM吸附为主,在略偏负的电位区间内以2,2-’bipy吸附为主,而正电位区间两者在金属表面共吸附,NMIM倾斜吸附在金属表面,而2,2’-bipy以顺式结构垂直吸附在金属表面。     

1,3-Bis(3-hyroxymethyl-5-methyl-1-pyrazole) propane as corrosion inhibitor for steel in 0.5 M H2SO4 solution

The effect of addition of 1,3-bis(3-hyroxymethyl-5-methyl-1-pyrazole) propane (M = 264 g). HMPP on steel corrosion in 0.5 M sulphuric acid is studied by weight-loss, electrochemical polarisation and electrochemical impedance spectroscopy (EIS) measurements at various temperatures. The results obtained showed that HMPP acts as a good corrosion inhibitor. The inhibition efficiency increases with the bipyrazole compound to attain 88%. It acts as a mixed-type inhibitor. Trends in the increase of charge-transfer resistance and decrease of capacitance values also show the adsorption of the molecule on the metal surface. The bipyrazole adsorbs on the steel surface according to the Langmuir isotherm adsorption model. Effect of temperature indicates that inhibition efficiency decreases with temperature between 25 and 85 °C.     

Effects of water plasma immersion ion implantation on surface electrochemical behavior of NiTi shape memory alloys in simulated body fluids

Water plasma immersion ion implantation (PIII) was conducted on orthopedic NiTi shape memory alloy to enhance the surface electrochemical characteristics. The surface composition of the NiTi alloy before and after H₂O-PIII was determined by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) was utilized to determine the roughness and morphology of the NiTi samples. Potentiodynamic polarization tests and electrochemical impedance spectroscopy (EIS) were carried out to investigate the surface electrochemical behavior of the control and H₂O-PIII NiTi samples in simulated body fluids (SBF) at 37 °C as well as the mechanism. The H₂O-PIII NiTi sample showed a higher breakdown potential (E_b) than the control sample. Based on the AFM results, two different physical models with related equivalent electrical circuits were obtained to fit the EIS data and explain the surface electrochemical behavior of NiTi in SBF. The simulation results demonstrate that the higher resistance of the oxide layer produced by H₂O-PIII is primarily responsible for the improvement in the surface corrosion resistance.