Long-lived polymer radicals. IV. Reactions of poly(N-methylacrylamide) and poly(N-methylmethacrylamide) radicals with binary mixtures of vinyl monomers

N-methylacrylamide (NMAAm) and N-methylmethacrylamide (NMMAm) were polymerized to give polymer microspheres containing living propagating radicals. The microsphere polymer radicals were allowed to react with some binary mixtures of vinyl monomers including alternating copolymerization combinations. The reaction processes were investigated by ESR spectroscopy. In the poly(NMMAm) radical/methyl methacrylate (MMA)/styrene (St) system, the propagating radical from MMA was mainly observed at the higher MMA concentration, while polySt radical prevailed at the lower MMA concentration. In the poly(NMMAm) radical/α-methylstyrene (α-MeSt)/diethyl fumarate system, the α-MeSt radical was exclusively observed, while the maleic anhydride (MAn) radical was predominantly observed in the α-MeSt/MAn system. In the MAn/diphenylethylene system, the propagating radicals from both monomers were observed at comparable concentrations. The poly(NMAAm) microsphere radical behaved differently in the reaction with the MMA/St mixture. The poly(NMAAm) microsphere was found to incorporate preferentially St, leading to formation of the St radical. The St preference was enhanced in the St/cyclohexyl methacrylate (CHMA) system. These results were in agreement with those of block copolymerization via the reaction of poly(NMAAm) radical with the MMA/St or CHMA/St mixture, where the compositions of the resulting polymers were analyzed by pyrolysis gas chromatography.     

Discrimination of Thermoplastic Polyesters by MALDI-TOF MS and Py-GC/MS

The aim of this work is to discriminate thermoplastic polyester-polyethylene terephthalate (PET), polybutylene terephthalate (PBT), and polytrimethylene terephthalate (PTT), which cannot be easily identified by many methods. Both matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS) and pyrolysis gas chromatography/mass spectrometry (Py-GC/MS) were applied to identify these polyesters owing to their analytical ability to determining polymers' chemical structure. The three thermoplastic polyesters can be easily distinguished by MALDI-TOF MS according to their different repeated units. Py-GC/MS was used to analyze their specific pyrolyzates. The three polyesters can be identified through their characteristic pyrolysis products as well.     

Py-GC/MS在VDF/CTFE共聚物链段结构和其裂解机理研究上的应用

用高分辨裂解气相色谱 质谱联用技术 (Py GC/MS)分析了VDF/CTFE(1∶4)链段结构和裂解机理。通过对实验条件的选择 ,找出了一套适合于VDF/CTFE(1∶4)共聚物的实验操作条件 ,且表明在此条件下所得的裂解谱图的重现性非常好。讨论了该共聚物具有无序的链段结构特征 ;确定此共聚物裂解机理为解聚断裂生成单体 ,还伴随有主链断裂形成低聚物     

Recent trends and developments in pyrolysis-gas chromatography

Pyrolysis-gas chromatography (Py-GC) has become well established as a simple, quick and reliable analytical technique for a range of applications including the analysis of polymeric materials. Recent developments in Py-GC technology and instrumentation include laser pyrolysis and non-discriminating pyrolysis. Progress has also been made in the detection of low-level polymer additives with the use of novel Py-GC devices. Furthermore, it has been predicted that future advances in separation technology such as the use of comprehensive two-dimensional gas chromatography will further enhance the analytical scope of Py-GC.     

Research on pyrolysis of PCB waste with TG-FTIR and Py-GC/MS

The purpose of this study is to determine the pyrolysis characteristics and gas product properties of printed circuit board (PCB) waste. For this purpose, a combination of Thermogravimetry-Fourier Transform Infrared Spectrum (TG-FTIR) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) techniques is employed. In the TG-FTIR experiment, a heating rate of 10?°C min^?1 and a terminal pyrolysis temperature of 600?°C are applied. The thermal decomposition temperature, weight losses, and the temperature trend of evolving gaseous products of PCB waste are investigated. Py-GC/MS is used for the qualitative and semi-quantitative analysis of the higher-molecular-weight volatile decomposition products. Associated with the analysis results of TG-FTIR and Py-GC/MS for the volatile products, PCB waste degradation could be subdivided into three stages. The main products in the first stage (<293?°C) are H₂O, CH₄, HBr, CO₂ and CH₃COCH₃. High-molecular-weight organic species, including bromophenols, bisphenol A, p-isopropenyl phenol, phenol, etc., mainly evolve in the second stage. In the last stage, at temperature above 400?°C, carbonization and char formation occur. This fundamental study provides a basic insight of PCB waste pyrolysis.     

Investigation of the pyrolysis behaviour of brown algae before and after pre-treatment using PY-GC/MS and TGA

The pyrolysis behaviour of a number of brown macroalgae (seaweeds) collected in the UK such as Laminaria hyperborea and Fucus vesticulosus, are compared with the tropical algae Macrocystis pyrifera. Macroalgae contain a significant amount of alkali earth metals, halogens and a range of trace heavy metals. Pre-treatment of the algae has been performed to remove mineral matter in both water and weak acid. The pyrolysis behaviour of the residues has been investigated and the effect of processing on ash content and mineral composition has been determined. The pyrolysis behaviour of the raw samples and the residues from processing has been studied using thermal gravimetric analysis (TGA) and pyrolysis-GC/MS (Py-GC/MS). Total mineral matter has been determined using inductively coupled plasma-optical emission spectroscopy (ICP-OES) before and after pre-treatment. The Py-GC/MS pyrograms at 500 °C indicate the presence of a range of ketones, pentosans, nitrogen containing compounds and phenols. The residues from pre-treatment have different pyrolysis behaviours, particularly after acid treatment. The pre-treatment schemes investigated can remove a significant proportion of the mineral matter and halogens although they also selectively extract polymeric material. The residues have lower ash content and lower nitrogen content. Results for pre-treatment in water are consistent with the removal of mannitol, while results for pre-treatment in acid are consistent with the removal of fucoidan, mannitol and the partial removal of laminarin. Py-GC/MS of the residue from pre-treatment in acid produces a similar pyrogram to alginic acid in which furfural is a dominant product. There appears to be potential for the production of fuels and chemicals from brown algae by pyrolysis although the reduction of mineral matter and halogens by pre-treatment is advantageous.     

Thermal degradation mechanisms of liquid crystalline aromatic polyesters studied by pyrolysis–gas chromatography/mass spectrometry

The thermal degradation mechanisms of liquid crystalline aromatic polyesters (LCPs) prepared from p-hydroxybenzoic acid (PHB), biphenol (BP), and terephthalic acid (TA) were studied by pyrolysis–gas chromatography/mass spectrometry (Py-GC/MS). The LCP containing deuterated terephthalate units and the LCPs that have different comonomer ratios were examined. On the basis of the pyrolysis products determined, the origin of the main pyrolysis products (benzene, phenol, biphenyl, phenyl benzoate, etc.) from the corresponding comonomer units were estimated and their thermal degradation mechanisms were eventually discussed in detail.     

Characterization of substituted polyacetylene microstructure by pyrolysis gas chromatography

A series of substituted acetylenes has been polymerized with WOC14/Ph4Sn metathesis catalyst and [Rh(cod)OMe]2 insertion catalyst, and the thermal degradation of the polyacetylenes prepared has been studied using pyrolysis capillary gas chromatography (Py-GC) with flame ionization and mass spectrometric detection to obtain information on the effect of the catalyst on the head-tail (H-T) isomerism of polyacetylenes (poly(phenylacetylene), poly[(4-methylphenyl)acetylene], poly(benzylacetylene), poly((2-fluorophenyl)acetylene], poly[(3-fluorophenyl)acetylene], and poly[(4-fluoro-phenyl)acetylenel). Cyclotrimers have been found to be the main pyrolysis products in all cases. Direct Py-MS connection was used to determine the temperature profiles of the released pyrolysis products. 1,3,5-Trisubstituted benzenes were found to be the predominant pyrolysis products of the polymers prepared with the insertion catalyst, which proves the presence of long head-to-tail sequences of monomeric units in these polyacetylenes. On the other hand, both 1,2,4- and 1,3,5-trisubstituted benzenes are present in significant amounts in the pyrolysis products of polymers prepared with the metathesis catalyst, which proves the presence of a significant content of the head-to-head (HH) and tail-to-tail (TT) linkages in these isomers of polyacetylenes. Contents of the regular (HT) and inverse (HH-TT) monomer linkages (RML and IML, respectively) in polymer chains were determined from the relative amounts of di-, tri-, and tetrasubstituted benzenes found in the Py-GC products.     

基于Py-GC联用的煤快速热解实验研究

采用居里点裂解仪-气相色谱仪(Py-GC)联用的方法研究了4种煤的快速热解特性,分析了挥发分主要气相产物及其析出规律.结果表明,大于等于50%的挥发分在热解初期(t ≤ 2 s)释放,采用箔片装载方式的居里点裂解仪完全热解1 mg煤样需要10 s;挥发分主要气相产物中,各气体组分的生成量(mmol/g_coal)顺序为H₂ > CH₄ > CO > CO₂ > C2(C₂H₆、C₂H₄)> C3(C₃H₈、C₃H₆);挥发分释放量随热解温度的升高而增加,相同热解条件下,次烟煤挥发分的释放率高于贫煤和无烟煤;H₂和CH₄的生成量依赖于热解温度,热解温度越高,H₂和CH₄的生成量越多;CO和CO₂的生成量不仅与热解温度相关,而且与煤中的氧含量紧密相关,氧含量越高的煤热解生成的CO和CO₂越多;C2和C3气体的生成量相对于其他气体很少,体积占挥发分气相产物的5%.     

同时裂解甲基化气相色谱法鉴别合成胶粘剂

 应用同时裂解甲基化气相色谱法 (Py Me GC)对合成胶粘剂进行了鉴别。采用热丝型裂解器、氢火焰离子化气相色谱仪、FFAP毛细管柱、程序升温方式及季铵盐甲基化试剂 ,对刑事案件中常见的丙烯酸酯类及其改性体、醋酸乙烯酯、聚乙烯醇等合成胶粘剂进行了测定 ,并对样品裂解各主要组分峰进行了GC/MS定性分析 ,同时比较了相同样本用常规裂解气相色谱法 (Py GC)测定的结果。结果表明 :Py Me GC法比Py GC法可获得更多的物质组分信息 ,是一种适用于法庭科学鉴定的方法。     

Study on the thermal degradation of high performance fibers by TG/FTIR and Py-GC/MS

The thermal degradation behaviors of Kevlar 49, Kevlar 129 (Poly(p-phenylene terephthamide), Nomex (polyisophthaloyl metaphenylene diamine), and PBO(poly(p-phenylene benzobisoxazole)) fibers were measured by TG/FTIR and Py-GC/MS. The characteristic temperatures of the fibers in air were obtained by TG. It indicated that the initial degradation temperature of the PBO is the highest. The initial degradation temperature of Nomex fiber is the lowest, but the end decomposition temperature of Nomex is the highest. The gases released by the pyrolysis in air were mainly CO₂, CO, H₂O, NO, and HCN, also containing a small amount of NH₃, and the absorption peaks of CO₂ were the strongest. The results of Py-GC/MS showed that CO₂ and benzene were the most pyrolysis fragment. With the change of pyrolysis temperature, the chromatogram and mass spectra results take a large variety. The pyrolysates can help us to study the pyrolysis process of high performance fibers.     

Biosynthesis of (R)-3-hydroxyalkanoic acids by metabolically engineered Escherichia coli

An efficient system for the production of (R)-hydroxyalkanoicacids (RHAs) was developed in natural polyhydroxyalkanoate (PHA)-producing bacteria and recombinant Escherichia coli. Acidic alcoholysis of purified PHA and in vivo depolymerization of PHA accumulated in the cells allowed the production of RHAs. In recombinant E. coli, RHA production was achieved by removing CoA from (R)-3-hydroxyacyl-CoA and by in vivo depolymerization of PHA. When the recombinant E. coli harboring the Ralstonia eutropha PHA biosynthesis genes and the depolymerase gene was cultured in a complex or a chemically defined medium containing glucose, (R)-3-hydroxybutyric acid (R3HB) was produced as monomers and dimers. R3HB dimers could be efficiently converted to monomers by mild alkaline heat treatment. A stable recombinant E. coli strain in which the R. eutropha PHA biosynthesis genes were integrated into the chromosome disrupting the pta gene was constructed and examined for the production of R3HB. When the R. eutropha intracellular depolymerase gene was expressed by using a stable plasmid containing the hok/sok locus of plasmid R1, R3HB could be efficiently produced.     

Mechanism of Xylan Pyrolysis by Py-GC/MS

In order to investigate the decomposition behavior of hemicellulose, xylan was chosen as the representative of hemicellulose to study the fast pyrolysis on the combination system of analytical pyrolyzer and gas chromatograph coupled with mass spectrometer(Py-GC/MS). The main condensable products of xylan pyrolysis consisted of acids, aldehydes, and ketones; while gas products contained CO₂, CO, CH₄ and H₂. Acetic acid and furfural were the most abundant products with the highest contents of 20.11% and 20.24% respectively. While furfural and acetic acid were formed competitively with residence time and temperature increases, the distribution of xylan pyrolysis products did not vary with the residence time and temperature, while the total content of several kinds of products changed a lot. According to the analysis of experimental data, a reaction pathway of xylan decomposition was deduced so as to illustrate the formation mechanism of main products.     

Miscibility of polycarbonates with copolymers containing cyclohexylmethacrylate

We prepared various copolymers containing styrene and methacrylates to examine their miscibility with polycarbonates such as bisphenol A polycarbonate (PC), dimethylpolycarbonate (DMPC), and tetramethylpolycarbonate (TMPC). Among the various copolymers examined, poly(methyl methacrylate‐co‐cyclohexylmethacrylate) [P(MMA–CHMA)] copolymers containing proper amounts of cyclohexylmethacrylate (CHMA) formed miscible blends with PC and DMPC, whereas TMPC did not form a miscible blend with P(MMA–CHMA). However, TMPC was miscible with poly(styrene‐co‐cyclohexylmethacrylate) [P(S–CHMA)] copolymers containing less than about 40 wt % CHMA, whereas PC and DMPC were always immiscible with P(S–CHMA). Miscible blends exhibited lower critical solution temperature (LCST)‐type phase behavior. Binary interaction energies were calculated from the observed phase boundaries with lattice–fluid theory combined with a binary interaction model. The quantitative interaction energy of each binary pair indicated that the phenyl ring substitution of polycarbonate with methyl groups did not lead to interactions that were favorable for miscibility with methyl methacrylate (MMA) and CHMA, but it did lead to favorable interactions with styrene. The addition of CHMA to MMA initially increased the LCST but ultimately led to immiscibility with PC and DMPC; however, addition of CHMA to styrene always decreased the LCST with TMPC. The increased LCST of PC or DMPC blends stemmed from intramolecular repulsion between MMA and CHMA, whereas the decreased LCST of TMPC/P(S–CHMA) blends with CHMA content came from negative interaction energy between styrene and CHMA. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1948–1955, 2001     

Synthesis and thermal properties of poly(cycloalkyl methacrylate)s bearing bridged- and fused-ring structures

Radical polymerizations of some cycloalkyl methacrylates bearing bridged- and fused-ring structures, i.e., bornyl methacrylate (BoMA), isobornyl methacrylate (IBoMA), 2-decahydronaphthyl methacrylate (DNMA), and 3-tetracyclo [4.4.0^2,5.1^7,10] dodecyl methacrylate (TCDMA), were carried out. The radical polymerization reactivities of these monomers depended on the structure of the cycloalkyl ester groups in the following order: TCDMA > BoMA > DNMA > CHMA > IBoMA > MMA, where CHMA and MMA are cyclohexyl and methyl methacrylates, respectively. The propagation and termination rate constants of these monomers were evaluated from the polymer radical concentration determined by electron spin resonance spectroscopy. The solubilities and microstructures of the resulting polymers were examined. Thermal properties, i.e., glass transition temperatures and decomposition behaviors, of the polymers were also investigated and related to the structures of the polymer side chain. © 1993 John Wiley & Sons, Inc.     

Study on grafting of different types of acrylic monomers onto natural rubber by γ-rays

 A comparative study of various acrylic monomers for grafting onto natural rubber was done. The stability of natural rubber latex (NRL) against coagulum with monomer, mechanical properties of grafted rubbers and percent of grafting were investigated. The NRL with monomers, methylacrylate (MA), ethylacrylate (EA) and n-butylacrylate (n-BA), is unstable but it is stable with methyl methacrylate (MMA), n-butyl methacrylate (BMA) and cyclohexyl methacrylate (CHMA). The mechanical properties and degree of grafting attained a maximum at a total radiation dose of 4 kGy. The values of tensile properties of MMA and CHMA grafted rubbers are almost similar, and higher than those of BMA grafted rubbers. On the other hand, the degree of grafting for CHMA is higher than those of MMA and BMA grafted rubbers. The infrared (IR) spectra of monomer grafted natural rubber were also studied.     

Presence of 5-hydroxyguaiacyl units as native lignin constituents in plants as seen by Py-GC/MS

The presence of 5-hydroxyguaiacyl moieties in the lignin from several plants has been assessed by Py-GC/MS. Different woody (eucalypt) and nonwoody (flax, hemp, kenaf, jute, sisal and abaca) angiosperms were selected for this study. The pyrolysis of whole fibers released lignin-derived products with p-hydroxyphenyl, guaiacyl and syringyl structures. Indeed, a series of compounds having a 5-hydroxyguaiacyl nuclei, including 3-methoxycatechol, 5-vinyl-3-methoxycatechol and 5-propenyl-3-methoxycatechol, were detected and identified in all samples, although in lower amounts than the normal guaiacyl or syringyl compounds. The analysis of the lignins isolated from the same plants also showed the same 3-methoxycatechol derivatives found after whole fiber pyrolysis. These compounds are supposed to arise from the pyrolysis of 5-hydroxyguaiacyl moieties, which are supposed to be native constituents of lignin in plants forming benzodioxane substructures.     

利用Py-GC/MS研究温度和时间对生物质热解的影响

以稻壳为原料,采用Py-GC/MS装置对其在不同热解条件下进行快速热解,并对热解气进行在线检测分析,考察了热解温度和时间对生物质热解性质的影响.结果表明,低于450 ℃,随着温度的升高,生物质热解产物种类及其产率均增加,但低温条件下产物种类较少,有利于产物的分离提纯;高于450 ℃,生物质热解产物种类基本稳定,仅在产率上有所变化,当550 ℃时,收率最大.随着热解温度的升高,其对应的最佳热解时间缩短,且生物质低温热解时间延长时热解比高温解热时间缩短时热解更充分.     

Py-GC/MS characterization of a wild and a selected clone of Arundo donax,and of its residues after catalytic hydrothermal conversion to high added-value products

Two analytical procedures based on gas chromatography and mass spectrometry were used to study the compositions of a wild population and a selected clone (Torviscosa) of giant reed (Arundo donax L.), one of the most promising biomass both in terms of energy and fine chemicals production. Gas chromatography/mass spectrometry (GC/MS) was used to characterize and quantitatively determine the monosaccharide composition. Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS), using hexamethyldisilazane (HMDS) as a derivatising agent, was used to characterize the lignocellulosic polymers. Analytical pyrolysis was also used to study the composition of residues left after the catalytic hydrolysis used to convert cellulose to levulinic acid and hemicellulose to furfural.GC/MS allowed us to determine the monosaccharide composition and polysaccharide content of the giant reed samples, highlighting that there was no significant difference between the wild population and the selected clone. GC/MS also highlighted that the giant reed leaves have a higher percentage (roughly 60%) of polysaccharide material than the stalks, which contain approximately 50%.Py-GC/MS, following the disappearance of the pyrolysis products of polysaccharides, showed that 150 °C and 190 °C are the best temperatures to obtain the complete catalytic conversion of hemicellulose and cellulose, respectively. Analytical pyrolysis also highlighted that in the course of catalytic hydrothermal conversion a partial depolymerisation of lignin was obtained. In particular, the formation of lignin units containing free phenol groups via the cleavage of the β-aryl ether bonds was demonstrated. The presence of these free phenols in the lignin network suggests the possible exploitation of lignin residues as antioxidant components or in high value biopolymer industries rather than the traditional use as low-value fuel for energy production.     

Py-GC/MS, GC/MS and FTIR investigations on LATE Roman-Egyptian adhesives from opus sectile: New insights into ancient recipes and technologies

An analytical protocol based on optical microscopy, Fourier transforms infrared spectroscopy (FTIR), analytical pyrolysis in the presence of hexamethyldisilazane followed by gas chromatographic/mass spectrometric analysis (Py-GC/MS) and gas chromatography/mass spectrometry after alkaline hydrolysis, solvent extraction and trimethylsilylation (GC/MS) was used in the chemical characterisation of the original adhesives used to fix monochrome and mosaic glass and stone plaques coming from the Late Roman archaeological site of Antinoopolis (Egypt).FTIR analysis demonstrated the presence of calcite fragments, and Py-GC/MS and GC/MS analyses provided detailed molecular compositions, highlighting the presence of a wide range of compound classes including diterpenoid acids, tricyclic abietanes with a high degree of aromatisation, mid- and long-chain monocarboxylic fatty acids, mono- and di-hydroxy acids, α,ω-dicaboxylic fatty acids, n-alkanols, and n-alkanes. Characteristic biomarkers and their distribution patterns indicated the presence of pine pitch in all the adhesives, which in some cases was admixed with beeswax and brassicaceae seed oil.The results provided new insights into the complex recipes used by artisans in ancient Egypt in the production of adhesives and in the sophisticated manufacture of opus sectile decorations.