Photocatalytic and superhydrophilicity properties of N-doped TiO2 nanothin films

Pure TiO₂ and nitrogen doped titanium dioxide (N-TiO₂) thin films were prepared by sol-gel method through spin coating on soda lime glass substrates. TiCl₄ and urea were used as Ti and N sources in the sol. XRD results showed nitrogen doping has retarded anatase to rutile phase transformation. The doping also leads to a decrease in roughness of the samples from 4 nm (TiO₂) to 1 nm (N-TiO₂). However, surface analysis by statistical methods reveals that both surfaces have self-affine structure. Optical band gap of thin films was shifted from 3.65 eV (TiO₂) to 3.47 eV (N-TiO₂). Hydrophilic conversion and photocatalytic degradation properties of thin films were investigated and exhibited that N-TiO₂ thin film has more preferable hydrophilicity and photocatalytic properties under UV illumination.     

Hydrothermal synthesis of well-dispersed ultrafine N-doped TiO2 nanoparticles with enhanced photocatalytic activity under visible light

Ultrafine nitrogen-doped TiO₂ nanoparticles with narrow particle size distribution, good dispersion, and high surface area were synthesized in the presence of urea and PEG-4000 via a hydrothermal procedure. TEM observation, N₂ adsorption, XRD, UV-vis spectroscopy, the Raman spectroscopy and XPS analysis were conducted to characterize the synthesized TiO₂ particles. The synthesized TiO₂ particles were a mixture of 49.5% anatase and 50.5% rutile with a size of around 5 nm. The photocatalytic activities were tested in the degradation of an aqueous solution of a reactive Brilliant Blue KN-R under both UV and visible light. The synthesized TiO₂ particles showed much higher photocatalytic activity than a commercial P25 TiO₂ powder under both UV and visible light irradiations. The high performance is associated to N doping, the reduced particle size, good dispersion, high surface area, and a quantum size effect.     

Improving the visible light photocatalytic activity of mesoporous TiO2 via the synergetic effects of B doping and Ag loading

B-doped together with Ag-loaded mesoporous TiO₂ (Ag/B–TiO₂) was prepared by a two-step hydrothermal method in the presence of boric acid, triblock copolymer surfactant, and silver nitrate, followed by heat treatment. The obtained samples were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), UV–vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy (XPS), and nitrogen adsorption–desorption. It was revealed that all samples consist of highly crystalline anatase with mesoporous structure. For Ag/B–TiO₂, B was doped into TiO₂ matrix in the form of both interstitial B and substitutional B while Ag was deposited on the surface of B–TiO₂ in the form of metallic silver. Compared with the single B-doped or Ag-loaded TiO₂ one, mesoporous Ag/B–TiO₂ exhibits much higher visible light photocatalytic activity for the degradation of Rhodamine 6G, which can be ascribed to the synergistic effects of B doping and Ag loading by narrowing the band gap of the photocatalyst and preventing the fast recombination of the photogenerated charge carriers, respectively.     

Enhanced photocatalytic activity of TiO2 nano-structured thin film with a silver hierarchical configuration

TiO₂ sol-gels with various Ag/TiO₂ molar ratios from 0 to 0.9% were used to fabricate silver-modified nano-structured TiO₂ thin films using a layer-by-layer dip-coating (LLDC) technique. This technique allows obtaining TiO₂ nano-structured thin films with a silver hierarchical configuration. The coating of pure TiO₂ sol-gel and Ag-modified sol-gel was marked as T and A, respectively. According to the coating order and the nature of the TiO₂ sol-gel, four types of the TiO₂ thin films were constructed, and marked as AT (bottom layer was Ag modified, surface layer was pure TiO₂), TA (bottom layer was pure TiO₂, surface layer was Ag modified), TT (pure TiO₂ thin film) and AA (TiO₂ thin film was uniformly Ag modified). These thin films were characterized by means of linear sweep voltammetry (LSV), X-ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy and transient photocurrent (I_ph). LSV confirmed the existence of Ag⁰ state in the TiO₂ thin film. SEM and XRD experiments indicated that the sizes of the TiO₂ nanoparticles of the resulting films were in the order of TT > AT > TA > AA, suggesting the gradient Ag distribution in the films. The SEM and XRD results also confirmed that Ag had an inhibition effect on the size growth of anatase nanoparticles. Photocatalytic activities of the resulting thin films were also evaluated in the photocatalytic degradation process of methyl orange. The preliminary results demonstrated the sequence of the photocatalytic activity of the resulting films was AT > TA > AA > TT. This suggested that the silver hierarchical configuration can be used to improve the photocatalytic activity of TiO₂ thin film.     

Novel hydrophobic/hydrophilic patterning process by photocatalytic Ag nucleation on TiO2 thin film and electroless Cu deposition

A hydrophobic/super-hydrophilic pattern was prepared on a TiO₂ thin film by a new fabrication process. The process consists of five key steps: (1) photocatalytic reduction of Ag⁺ to Ag (nucleation), (2) electroless Cu deposition, (3) oxidation of Cu to CuO, (4) deposition of a self-assembled monolayer (SAM), and (5) photocatalytic decomposition of selected areas of the SAM. A hydrophobic/super-hydrophilic pattern with 500-μm² hydrophilic areas was obtained in this process. It is particularly noteworthy that a UV irradiation time of only 1 s was sufficient for the nucleation step in the patterning process.     

The synthesis and kinetic growth of anisotropic silver particles loaded on TiO2 surface by photoelectrochemical reduction method

Silver nanorods with average diameters of 120-230 nm and aspect ratio of 1.7-5.0 were deposited on the surface of TiO₂ films by photoelectrochemical reduction of Ag⁺ to Ag under UV light. The composite films prepared on soda-lime glass substrates were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results show that the TiO₂ film after UV irradiation in AgNO₃ solution is composed of anatase phase TiO₂ and metallic silver with face centered cubic structure. Other compounds cannot be found in the final films. The maximum deposition content of silver particles on the surface of TiO₂ film was obtained with the AgNO₃ concentration of 0.1 M. The kinetic growth rates of silver particles can be controlled by photocatalytic activity of TiO₂ films. The studies suggest that the growth rates of silver particles increase with the enhancement of photocatalytic activity of TiO₂ films. The maximum growth rate of silver particles loaded on TiO₂ films can be up to 0.353 nm min⁻¹ among samples 1#, 2# and 3#, while the corresponding apparent rate constant of TiO₂ is 1.751 × 10⁻³ min⁻¹.     

Application of TiO2 nano-particles on the electrode of dye-sensitized solar cells

In this study, nano-TiO₂ thin film electrode and solar cell have been investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible absorption spectra, contact angle, X-ray photoelectron spectroscopy (XPS), and current-voltage characteristics analyses. X-ray diffraction patterns show that the best sintering temperature of a nano-TiO₂ film is 600 °C, at which TiO₂ anatase phase forms best and the particle size of 8-10 nm can be obtained. The SEM images of a nano-TiO₂ thin film show that the surface of the film is smooth and porous, and the thickness of the nano-TiO₂ film is 4 μm. The measurements of contact angle between nano-TiO₂ film and deionized water (DI water) reveal that the nano-TiO₂ film is super-hydrophilic when solarized under ultraviolet. The electrode of dye-sensitized solar cell is used as a free-base porphyrin with carboxyl group, 5,10,15,20-tetrakis (4-carboxyphenyl) porphyrin (TCPP) as the sensitizer to adsorb onto the TiO₂ thin film. From the results of ultraviolet-visible absorption spectra and XPS analyses of the electrode, the effects of nano-TiO₂ particles’ addition to the electrode of dye-sensitized solar cell can improve the absorption of visible light (400-700 nm) and increase electrons transferred from TCPP to the conduction band of TiO₂, resulting in the enhancement of efficiency for dye-sensitized solar cells.     

Photocatalytic activity of dc magnetron sputter deposited amorphous TiO2 thin films

For photocatalytic thin film applications TiO₂ is one of the most important materials. The most studied TiO₂ crystal phase is anatase, though also rutile and brookite show good photoactivity. Usually anatase or a mixture of rutile and anatase is applied for powder or thin film catalysts. It has been claimed that amorphous films do not exhibit any or only a very low photocatalytic activity.We have deposited amorphous thin films by dc magnetron sputtering from sub-stoichiometric TiO_2−x targets. The coatings are transparent and show a photocatalytic activity half of that of a thin layer of spin-coated reference photocatalyst powder. Annealing the thin films to yield anatase crystallization more than doubles their photocatalytic activity. At the same film thickness these thin films show the same activity as a commercially available photocatalytic coating.The dependence of the photocatalytic activity on deposition parameters like gas pressure and sputter power is discussed. A decrease in film density, as deduced from the refractive index and the microstructure, resulted in an increase in photocatalytic activity. Film thickness has a marked influence on the photocatalytic activity, showing a strong increase up to 300-400 nm, followed by a much shallower slope.     

The hybrid photocatalyst of TiO2–SiO2 thin film prepared from rice husk silica

The TiO₂–SiO₂ thin film was prepared by self-assembly method by mixing SiO₂ precursor with titanium precursor solution and aged to obtain a co-precipitation of silica and titanium crystals. Dip coating method was applied for thin film preparation on glass slide. The X-ray diffraction (XRD) of the self-assembly thin film had no characteristic property of SiO₂ and even anatase TiO₂ but indicated new crystal structure which was determined from the Fourier Transform Infrared Spectrophotometer (FTIR) as a hybridized Ti–O–Si bonding. The surface area and surface volume of the self-assembly sample were increased when SiO₂ was incorporated into the film. The self-assembly TiO₂–SiO₂ thin film exhibited the enhanced photocatalytic decolorization of methylene blue (MB) dye. The advantages of SiO₂ are; (1) to increase the adsorbability of the film and (2) to provide the hydroxyl radical to promote the photocatalytic reaction. The self-assembly thin film with the optimum molar ratio (SiO₂:TiO₂) as 20:80 gave the best performance for photocatalytic decolorization of MB dye with the overall efficiency of 81%.     

Evolution of structural and optical properties of rutile TiO2 thin films synthesized at room temperature by chemical bath deposition method

Nanocrystalline thin films of TiO₂ were prepared on glass substrates from an aqueous solution of TiCl₃ and NH₄OH at room temperature using the simple and cost-effective chemical bath deposition (CBD) method. The influence of deposition time on structural, morphological and optical properties was systematically investigated. TiO₂ transition from a mixed anatase–rutile phase to a pure rutile phase was revealed by low-angle XRD and Raman spectroscopy. Rutile phase formation was confirmed by FTIR spectroscopy. Scanning electron micrographs revealed that the multigrain structure of as-deposited TiO₂ thin films was completely converted into semi-spherical nanoparticles. Optical studies showed that rutile thin films had a high absorption coefficient and a direct bandgap. The optical bandgap decreased slightly (3.29–3.07 eV) with increasing deposition time. The ease of deposition of rutile thin films at low temperature is useful for the fabrication of extremely thin absorber (ETA) solar cells, dye-sensitized solar cells, and gas sensors.     

Preparation of Fe2O3/SrTiO3 composite powders and their photocatalytic properties

Fe₂O₃/SrTiO₃ composite powders have been prepared and their photocatalytic activities were investigated by photooxidizing methanol. These powders were characterized by ultraviolet (UV)-visible diffuse reflectance spectra, scanning electron microscope (SEM) and X-ray diffraction (XRD). The results showed that the Fe₂O₃/SrTiO₃ composite powders with optimum proportion exhibited higher photocatalytic activity than pure SrTiO₃, Fe₂O₃ and TiO₂ (P25) under visible light (λ>440 nm) irradiation. The SEM image of the composite powders showed that SrTiO₃ and Fe₂O₃ particles contacted well. Further research revealed that the calcination temperature is an important factor in the preparation of the composite powder with relatively high photocatalytic ability.     

Photo(electro)catalytic Activity of Cu-Modified TiO2 Nanorod Array Thin Films under Visible Light Irradiation

In the present study, a two-step method was applied to synthesise Cu²⁺-modified TiO₂ nanorod array thin films for photocatalytic processes. TiO₂ nanorod array thin films were synthesised by a hydrothermal method and then modified with an ultrasonic-assisted sequential cation adsorption method. The samples were characterised by X-ray diffraction (XRD), UV–vis diffuse reflectance spectra (DRS), scanning electron microscopy (SEM), photoluminescence (PL) spectroscopy and inductively coupled plasma mass spectroscopy (ICP-MS) analysis. The photoelectrochemical properties of the samples were evaluated by linear sweep voltammetry and Mott–Schottky analysis; photocatalytic activities were tested by methylene blue degradation under visible light. The photocurrent density of the TiO₂/FTO sample modified with 50 mM Cu²⁺ solution was 26 times higher than that of the unmodified TiO₂/FTO sample. Additionally, methylene blue degradation efficiency under visible light was increased 40% with respect to the efficiency of the unmodified sample. The mechanism of the photocatalytic activity enhancement of Cu²⁺-modified TiO₂ nanorod films was discussed.     

Effect of surface fluorination on the photocatalytic and photo-induced hydrophilic properties of porous TiO2 films

Porous surface-fluorinated TiO₂ (F-TiO₂) films were prepared through PEG modified sol-gel method and surface fluorination. The as-prepared films were characterized with XRD, FTIR, AFM, XPS and UV-vis DRS. The effects of surface fluorination on the photocatalytic activity and hydrophilicity of porous TiO₂ film were studied by photocatalytic degradation of rhodamine B (RhB) as well as water contact angle (CA) on porous TiO₂ film. The results showed that the surface fluorination increased the adsorption of RhB on the porous TiO₂ film and enhanced the photocatalytic degradation of RhB. The concentration and pH of NaF solutions affected much the photocatalytic activity of porous TiO₂ film. Porous F-TiO₂ film prepared in 40 mM NaF solution at pH 4.0 showed the highest photocatalytic activity. Because of its porous structure, the porous F-TiO₂ film had original water CA of 22.7°, which is much smaller than that of normal F-TiO₂ film. Under UV light irradiation, the water CA of porous F-TiO₂ film decreased to 5.1° in 90 min.     

Influence of pH on the preparation of dispersed Ag–TiO<Subscript>2</Subscript> nanocomposite

In this paper, data concerning the effect of pH on the morphology of Ag–TiO₂ nanocomposite during photodeposition of Ag on TiO₂ nanoparticles is reported. TiO₂ nanoparticles prepared by sol–gel method were coated with Ag by photodeposition from an aqueous solution of AgNO₃ at various pH levels ranging from 1 to 10 in a titania sol, under UV light. The as-prepared nanocomposite particles were characterized by UV–vis absorption spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂ adsorption/desorption method at liquid nitrogen temperature (−196 °C) from Brunauer–Emmett–Teller (BET) measurements. It is shown that at a Ag loading of 1.25 wt.% on TiO₂, a high-surface area nanocomposite morphology corresponding to an average of one Ag nanoparticle per titania nanoparticle was achieved. The diameter of the titania crystallites/particles were in the range of 10–20 nm while the size of Ag particles attached to the larger titania particles were 3 ± 1 nm as deduced from crystallite size by XRD and particle size by TEM. Ag recovery by photo harvesting from the solution was nearly 100%. TEM micrographs revealed that Ag-coated TiO₂ nanoparticles showed a sharp increase in the degree of agglomeration for nanocomposites prepared at basic pH values, with a corresponding sharp decrease in BET surface area especially at pH > 9. The BET surface area of the Ag–TiO₂ nanoparticles was nearly constant at around a value of 140 m² g⁻¹ at all pH from 1–8 with an anomalous maximum of 164 m² g⁻¹ when prepared from a sol at pH of 4, and a sharp decrease to 78 m² g⁻¹ at pH of 10.     

Preparation and photocatalytic activity of CeO2/TiO2 interface composite film

The CeO₂/TiO₂ and TiO₂/CeO₂ interface composite films were prepared on glass substrates by the sol-gel process via dip-coating and calcining technique. The scanning electron microscopy (SEM) revealed that the TiO₂ layer has a compact and uniformity glasslike surface with 200 nm in thickness, and the CeO₂ layer has a coarse surface with 240 nm in thickness. The X-ray diffractometer (XRD) analysis showed that the TiO₂ layer is made up of anatase phase, and the CeO₂ layer is structured by cubic fluorite phase. Through a series of photo-degradation experiments, the relationship of the photocatalytic activity with the constituents of the films was studied. In virtue of the efficient interfacial charge separation via the process of electron transfer from TiO₂ to CeO₂, the photocatalytic activity of the CeO₂/TiO₂ composite film is high. Contrarily, the photocatalytic activity of the TiO₂/CeO₂ composite film is low, due to its inert surface made up of CeO₂ with broad bandwidth. Apart from the effect of the film structure, the effect of film thickness on photocatalytic activity was also discussed.     

Structural, optical, and electrical properties of p-type NiO films and composite TiO2/NiO electrodes for solid-state dye-sensitized solar cells

p-Type nickel oxide thin films were prepared by sol-gel method, and their structural, optical and electrical properties were investigated. The Ni(OH)₂ sol was formed from nickel (II) acetate tetrahydrate, Ni(CH₃COO)₂·4H₂O, in a mixture of alcohol solution and poly(ethylene glycol), and deposited on an ITO substrate by spin coating followed by different heat treatments in air (50-800 °C). The formation and composition of NiO thin film was justified by EDX analysis. It is found that the thickness of the NiO film calcined at 450 °C for 1 h is about 120 nm with average particle size of 22 nm, and high UV transparency (∼75%) in the visible region is also observed. However, the transmittance is negligible for thin films calcined at 800 °C and below 200 °C due to larger particle size and the amorphous characteristics, respectively. Moreover, the composite electrode comprising n-type TiO₂ and p-type NiO is fabricated. The current-voltage (I-V) characteristics of the composite TiO₂/NiO electrode demonstrate significant p-type behavior by the shape of the rectifying curve in dark. The effect of calcination temperature on the rectification behavior is also discussed.     

Chemical reactions in TiO2/SnO2/TiCl4 hybrid electrodes and their impacts to power conversion efficiency of dye-sensitized solar cells

This study examined the applicability of TiO₂/SnO₂/TiCl₄ hybrid electrodes in dye-sensitized solar cells (DSSCs) by combining chemical modeling with experimentation. The interfacial chemical reactions in a TiO₂/SnO₂/TiCl₄ system were simulated using a thermochemistry software package, which led to the design and testing of hybrid working electrodes. Chemical thermodynamic modeling proved that TiCl₄ is an effective agent in removing Tiⁿ⁺ (n<4) and Sn^m+ (m<4) ion impurities from dry-mixed TiO₂/SnO₂ composite particles. Our results demonstrate that the power conversion efficiency of DSSC with a TiO₂/SnO₂/TiCl₄ hybrid electrode exceeds that of the conventional DSSC with a TiO₂ electrode due to the effects of light-scattering and the formation of additional absorbance (SnCl₂), which is an unexpected side effect of TiCl₄ treatment enabling the absorption of visible light. The proposed approach is ideally suited to establishing relationships between chemistry theory and the structure and performance of advanced DSSCs as well as photo-electro-chemical systems.     

Effect of Particle Size and Phase Composition of Titanium Dioxide Nanoparticles on the Photocatalytic Properties

Titanium dioxide (TiO₂) nanoparticles were prepared by the oxidation of titanium tetrachloride (TiCl₄) in a diffusion flame reactor. The average diameter of particles was 15–30 nm and mass fraction of anatase ranged from 40% to 80%. Effects of particle size and phase composition of those TiO₂ nanoparticles on photocatalytic properties such as decomposition of methylene blue, bacteria and ammonia gas were investigated. The degree of decomposition of methylene blue by the TiO₂ nanoparticles under the illumination of the black light was directly proportional to the anatase mass fraction, but inversely to the particle size. The decomposition of bacteria and ammonia gas by the TiO₂ nanoparticles under the illumination of the fluorescent light showed the same trend as in the case of the methylene blue.     

Deodorisation effect of diamond-like carbon/titanium dioxide multilayer thin films deposited onto polypropylene

Many types of plastic containers have been used for the storage of food. In the present study, diamond-like carbon (DLC)/titanium oxide (TiO₂) multilayer thin films were deposited on polypropylene (PP) to prevent flavour retention and to remove flavour in plastic containers.For the flavour removal test, two types of multilayer films were prepared, DLC/TiO₂ films and DLC/TiO₂/DLC films. The residual gas concentration of acetaldehyde, ethylene, and turmeric compounds in bottle including the DLC/TiO₂-coated and the DLC/TiO₂/DLC-coated PP plates were measured after UV radiation, and the amount of adsorbed compounds to the plates was determined. The percentages of residual gas for acetaldehyde, ethylene, and turmeric with the DLC/TiO₂ coated plates were 0.8%, 65.2% and 75.0% after 40 h of UV radiation, respectively. For the DLC/TiO₂/DLC film, the percentages of residual gas for acetaldehyde, ethylene and turmeric decreased to 34.9%, 76.0% and 85.3% after 40 h of UV radiation, respectively. The DLC/TiO₂/DLC film had a photocatalytic effect even though the TiO₂ film was covered with the DLC film.     

Enhanced photocatalytic activity and stability of nano-scaled TiO2 co-doped with N and Fe

Titanium dioxide (TiO₂) nanoparticles co-doped with N and Fe were prepared via modified sol-gel process. The products were characterized by transmission electron microscopy (TEM), N₂ adsorption, X-ray diffraction (XRD), Raman spectroscopy, UV-vis spectroscopy, photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS). It is shown that the prepared TiO₂ particles were less than 10 nm with narrow particle size distribution. The addition of MCM-41 caused the formation of Ti-O-Si bond which fixed the TiO₂ on MCM-41 surface, thus restricted the agglomeration and growth of TiO₂ particles. The photocatalytic performance in the degradation of methylene blue showed that N, Fe co-doped TiO₂ exhibited much higher photocatalytic activity than doped sample with nitrogen or Fe³⁺ alone under both UV and visible light. N, Fe co-doping decreased the loss of doping N during the degradation reaction, thus increased the photocatalytic stability. It was also found that the nitridation time had significant influence on the photocatalytic activity of prepared TiO₂ catalysts.