Preparation,Structural Properties and Thermal Isomerization of Hex‐3‐ene‐1,5‐diyne Bridged [2.2]Paracyclophanes

The [2.2]paracyclophane moiety is used as a spacer to connect the ends of a hex‐3‐ene‐1,5‐diyne unit, a π‐system that on thermolysis usually cycloaromatizes to a benzene ring (Bergman cyclization). For the preparation of the pseudo‐geminally‐bridged system 9 , the diacetylene 3 was chain‐extended to the diol 16 , which after conversion to the pseudo‐geminal dibromide 17 was ring‐closed by treatment with LiHMDS/HMPA to the [2.2]paracyclophane enediyne 9 . Whereas the McMurry coupling of the pseudo‐ortho bisaldehyde 24 resulted in the formation of the hexadienyne‐bridged cyclophane 27 , the pseudo‐ortho‐bridged hydrocarbon 11 was obtained by preparing first the diol 28 from 24 , converting the latter into the dioxolane 29 , which in the last step furnished the olefin 11 by treatment with Tf₂O/EtN(iPr)₂. The authentic Bergman product 10 of the pseudo‐gem‐bridged hexenediyne 9 was synthesized by a conventional sequence starting from the ethynyl formyl substrate 18 . Since the pseudo‐ortho‐enediyne‐bridged hydrocarbon 11 is thermally labile, its benzannelated derivate 34 was prepared. No classical Bergman cyclization reactions could be observed for any of the [2.2]paracyclophane‐bridged hexenediynes prepared here. In the pseudo‐gem‐series the fulvenes 14 and 15 were the only products that could be identified under thermal conditions (McMurry coupling); the benzannelated substrate 34 gave the benzofulvene‐bridged cyclophane 36 on photolysis. Bergman cyclizations yielding fulvene derivatives are extremely rare. The mechanism of the cyclization of 9 and 34 is discussed, using compliance constants. The structure assignments of the hydrocarbons synthesized in this study are based on spectroscopic studies as well as X‐ray structural analyses for 9 , 10 , 11 , 27 , and 34 .     

Synthesis of [n]Cyclo‐5,15‐porphyrinylene‐4,4′‐biphenylenes Displaying Size‐Dependent Excitation‐Energy Hopping

A set of 5,15‐biphenylene‐bridged porphyrin wheels, namely, [n]cyclo‐5,15‐porphyrinylene‐4,4′‐biphenylenes [n]CPB , have been synthesized through the platination of 5,15‐bis(4‐(pinacolboranyl)phenyl) nickel(II) porphyrin and subsequent reductive elimination of Pt^II(cod)‐bridged cyclic porphyrin intermediates. The calculated strain energies for [3]CPB , [4]CPB , [5]CPB , and [6]CPB are 49.3, 32.9, 23.5, and 16.0 kcal mol^?1, respectively. UV/Vis absorption spectra and cyclic voltammetry indicated characteristic ring‐size‐dependent absorption‐peak shifts and redox‐potential shifts, which presumably reflect the degree of strain in the π‐systems. Excitation‐energy hopping (EEH) times were determined to be 5.1, 8.0, 8.0, and 9.6 ps for [3]CPB , [4]CPB , [5]CPB , and [6]CPB , respectively, in a pump‐power‐dependent TA experiment.     

Lewis Acid‐Catalyzed Intramolecular [3 + 2] Cross‐Cycloaddition of Donor‐ Acceptor Epoxides with Alkenes for Construction of Oxa‐[n.2.1] Skeletons

The first LA‐catalyzed [3 + 2]IMCC of GDA‐epoxides with carbon‐carbon double bonds has been developed. This provides an efficient and general strategy for construction of bridged oxa‐[n.2.1] skeletons. A novel S_N‐like mechanism through a carbon‐carbon bond cleavage of epoxide ring has been proposed.     

Characterization of [2Fe–2S]‐Cluster‐Bridged Protein Complexes and Reaction Intermediates by use of Native Mass Spectrometric Methods

Many iron–sulfur proteins involved in cluster trafficking form [2Fe–2S]‐cluster‐bridged complexes that are often challenging to characterize because of the inherent instability of the cluster at the interface. Herein, we illustrate the use of fast, online buffer exchange coupled to a native mass spectrometry (OBE nMS) method to characterize [2Fe–2S]‐cluster‐bridged proteins and their transient cluster‐transfer intermediates. The use of this mechanistic and protein‐characterization tool is demonstrated with holo glutaredoxin 5 (GLRX5) homodimer and holo GLRX5:BolA‐like protein 3 (BOLA3) heterodimer. Using the OBE nMS method, cluster‐transfer reactions between the holo‐dimers and apo‐ferredoxin (FDX2) are monitored, and intermediate [2Fe–2S] species, such as (FDX2:GLRX5:[2Fe–2S]:GSH) and (FDX2:BOLA3:GLRX5:[2Fe–2S]:GSH) are detected. The OBE nMS method is a robust technique for characterizing iron–sulfur‐cluster‐bridged protein complexes and transient iron–sulfur‐cluster transfer intermediates.     

Calix[4]arene‐based Bis‐phosphonites,Bis‐phosphites,and Bis‐O‐acyl‐phosphites as Ligands in the Rhodium(I)‐catalyzed Hydroformylation of 1‐Octene

New calix[4]arene‐based bis‐phosphonites, bis‐phosphites and bis‐O‐acylphosphites were synthesized and characterized. Treatment of these P‐ligands with selected rhodium and platinum precursors led to mononuclear complexes that were satisfactorily characterized. The solid state structure of the dirhodium(I) complex 14 has been determined by X‐ray diffraction. The two rhodium centres are bridged by two chloro ligands; one rhodium atom is further coordinated by calix[4]arene phosphorus atoms and the other by cyclooctadiene. The new calix[4]arene P‐ligands were tested in the Rh(I) catalyzed hydroformylation of 1‐octene. All Rh(I) complexes catalyzed the reaction leading to high chemoselectivity with regard to the formation of aldehydes. Yields and n/iso‐selectivities depended on the reaction conditions. Average yields of 80 % and n/iso‐ratios of about 1.3 to 1.5 were observed. High yields of aldehydes can be achieved using the methoxy substituted P‐ligands at low Rh:ligand ratios.     

Synthesis and Crystal Structure of Octahydro‐5H,12H‐4,11‐methano‐1H,7H‐bis[1,2,5]oxadiazolo[3,4‐d:3′,4′‐j][1,7,3,9]dioxadiazacyclododecine

The unusual 12‐membered ring compound, octahydro‐5H,12H‐4,11‐methano‐1H,7H‐bis[1,2,5]oxadiazolo[3,4‐d:3′,4′‐j][1,7,3,9]dioxadiazacyclododecine is obtained from the acid catalyzed reaction of 3‐amino‐4‐hydroxymethylfurazan with formaldehyde instead of the expected methylene‐bridged compound, 4,4′‐methylenebis[4,5‐dihydro‐7H‐[1,2,5]oxadiazolo[3,4‐d][1,3]oxazine]. The compound crystallizes in Tetragonal, P4₃2₁2, a = 6.4141(4) Å, b = 6.4141(4) Å, c = 26.525(3) Å, α = 90°, β = 90°, γ = 90°, V = 1091.27(16) ų, Z = 4, dcalc = 1.614 Mg/m³.     

Solvent‐Driven Iodine‐Mediated Oxidative Strategies for the Synthesis of Bis(imidazo[1,2‐a]pyridin‐3‐yl)sulfanes and Disulfanes

Two efficient iodine‐mediated strategies, which are economical and one‐pot, are described to access bis(imidazo[1,2‐a ]pyridin‐3‐yl)sulfanes and bis(imidazo[1,2‐a ]pyridin‐3‐yl)disulfanes in chloroform and acetic acid, respectively, by a direct oxidative homocoupling of imidazo‐heterocycles using inexpensive sodium sulfide as a sulfur source. These strategies are scalable, and an array of substrates delivered their corresponding stable sulfur‐bridged imidazo‐heterocycles in excellent yields.     

QCM 表面自组装胱氨酸1，3－桥连杯[4]芳烃膜用于识别气相丁胺

Two cystine-bearing 1,3-bridged calix[4]arenes were used as the coatings of the quartz crystal microbalance (QCM) with gold electrodes. The two calix[4]arene derivatives were self-assembled onto the gold electrode surface by the covalent attachment between the di-sulfur and gold. The compound of cystine-bearing bi-phenylalanine 1,3-bridged calix[4]arene (CPC) with longer alkyl chain had better self-assembled capacity onto the fresh surfaces of gold electrode than that of cystine-bearing 1,3-bridged calix[4]arene (CC) with comparably shorter alkyl chain.The modified QCM sensors were used to recognize the butylamine isomers in gas. The results showed that the QCM coated with both compounds had preferential affinity to n-butylamine, then i-butylamine, t-butylamine in the range of low concentrations, indicating that in the recognition process, the steric hindrance effect played an important role when forming complex with guest molecules. When the concentrations of the analytes were increased, the polarity and the magnetism of the butylamine became determinative factors. The reversibility was improved greatly and the equilibrium time was much shorter on the self-assembled film than on the film obtained by dropping coating.     

Synthesis and Characterization of the Zinc Amides: [EtZnL]2 and [ZnL2] (L = N,N‐dimethyl(N′‐trimethylsilyl)ethane‐1,2‐diaminate)

The ligand N,N‐dimethyl(N′‐trimethylsilyl)ethane‐1,2‐diamine (HL) was treated with ZnEt₂ in varying stoichiometric ratios to synthesize [EtZnL]₂ and [ZnL₂] complexes. Crystal data: [EtZnL]₂, monoclinic, P2₁/n, a = 10.0149(5) Å, b = 8.0296(3) Å, c = 16.1689(8) Å, β = 91.715(2)°. [ZnL₂], monoclinic, P2₁/n, a = 8.8457(3) Å, b = 15.4249(6) Å, c = 16.0121(7) Å, β = 92.656(1)°. The former complex is an amido nitrogen bridged dimer with distorted tetrahedral stereochemistry of the zinc atom and the latter is a distorted tetrahedral monomer based on amide/amine chelation.     

meso‐Cumulenic 2H‐Corroles from meso‐Ethynyl‐3H‐corroles

Alkynyl‐substituted 3H‐corrole 9 a was converted to [3]cumulenic 2H‐corrole 10 a by treatment with trimethylsilyl chloride (TMSCl), and 1,3‐butadiyne‐bridged 3H‐corrole dimer 11 b was transformed into [5]cumulene‐bridged 2H‐corrole dimer 12 b by oxidation with PbO₂. Both 10 a and 12 b were metalated to form Zn^II complexes 10 a‐Zn and 12 b‐Zn . The structures of 10 a‐Zn and 12 b‐Zn show planar conformations with bond‐length alternations that are analogous to those of tetraaryl [n]cumulenes. The cumulenic corrole dimers 12 b and 12 b‐Zn display large NIR absorption bands in the range of 700–1400 nm (maximum ϵ≈1.0×10⁵ m ⁻¹ cm⁻¹) owing to the effective π‐conjugation between the two corrole units through the [5]cumulene bridge.     

Bis(4,4′‐dimethyl‐2,2′‐bipyridine) ruthenium (II) Complexes Containing 2‐Arylimidazo‐ [4,5‐f] [1,10] phenanthroline: Syntheses,Characterization and Third‐order Nonlinear Optical Properties

Four novel mononuclear ruthenium(II) complexes [Ru(dmb)₂L]²⁺ [dmb = 4,4′‐dimethyl‐2,2′‐bipyridine, L = imidazo‐[4,5‐f][1,10]phenanthroline (IP), 2‐phenylimidazo‐[4,5‐f][1,10]phenanthroline (PIP), 2‐(4′‐hydroxyphenyl)imidazo‐[4,5‐f] [1,10] phenanthroline (HOP), 2‐(4′‐dimethylaminophenyl) imidazo‐[4, 5‐f] [1,10] phenanthroline (DMNP)] were synthesized and characterized by ES‐MS, ¹H NMR, UV‐vis and electrochemistry. The nonlinear optical properties of the ruthenium(II) complexes were investigated by Z‐scan techniques with 12 ns laser pulse at 540 nm, and all of them exhibit both nonlinear optical (NLO) absorption and self‐defocusing effect. The corresponding effective NLO susceptibility |x³| of the complexes is in the range of 2.68 × 10^?12‐4.57 × 10^?12 esu.     

Synthesis and Molecular Recognition of Water‐Soluble S6‐Corona[3]arene[3]pyridazines

We report the efficient and scalable synthesis and molecular‐recognition properties of novel and water‐soluble S₆‐corona[3]arene[3]pyridazines. The synthesis comprises a one‐pot nucleophilic aromatic substitution reaction between diesters of 2,5‐dimercaptoterephthalate and 3,6‐dichlorotetrazine followed by the inverse electron‐demand Diels–Alder reaction of the tetrazine moieties with an enamine and exhaustive saponification of esters. The resulting S₆‐corona[3]arene[3]pyridazines, which adopt a 1,3,5‐alternate conformation in the crystalline state, are able to selectively form stable 1:1 complexes with dicationic guest species in water with association constants ranging from (1.10±0.06)×10³ M ^?1 to (1.18±0.06)×10⁵ M ^?1. The easy availability, large cavity size, strong and selective binding power render the water‐soluble S₆‐corona[3]arene[3]pyridazines useful macrocyclic hosts in various disciplines of supramolecular chemistry.     

Group 3 Metal Initiators with an [OSSO]‐Type Bis(phenolate) Ligand for the Stereoselective Polymerization of Lactide Monomers

A series of 1,ω‐dithiaalkanediyl‐bridged bis(phenols) of the general type [OSSO]H₂ with variable steric properties and various bridges were prepared. The stoichiometric reaction of the bis(phenols) 1,3‐dithiapropanediyl‐2,2′‐bis(4,6‐di‐tert‐butylphenol), 1,3‐dithiapropanediyl‐2,2′‐bis[4,6‐di(2‐phenyl‐2‐propyl)phenol], rac‐2,3‐trans‐propanediyl‐1,4‐dithiabutanediyl‐2,2′‐bis[4,6‐di(2‐phenyl‐2‐propyl)phenol], rac‐2,3‐trans‐butanediyl‐1,4‐dithiabutane diyl‐2,2′‐bis[4,6‐di(2‐phenyl‐2‐propyl)phenol], rac‐2,3‐trans‐hexanediyl‐1,4‐dithiabutanediyl‐2,2′‐bis[4,6‐di(2‐phenyl‐2‐propyl)phenol], 1,3‐dithiapropanediyl‐2,2′‐bis[6‐(1‐methylcyclohexyl)‐4‐methylphenol] (C₁, R=1‐methylcyclohexyl), and 1,4‐dithiabutanediyl‐2,2′‐bis[6‐(1‐methylcyclohexyl)‐4‐methylphenol] with rare‐earth metal silylamido precursors [Ln{N(SiHMe₂)₂}₃(thf)_x] (Ln=Sc, x=1 or Ln=Y, x=2; thf=tetrahydrofuran) afforded the corresponding scandium and yttrium bis(phenolate) silylamido complexes [Ln(OSSO){N(SiHMe₂)₂}(thf)] in moderate to good yields. The monomeric nature of these complexes was shown by an X‐ray diffraction study of one of the yttrium complexes. The complexes efficiently initiated the ring‐opening polymerization of rac‐ and meso‐lactide to give heterotactic‐biased poly(rac‐lactides) and highly syndiotactic poly(meso‐lactides). Variation of the ligand backbone and the steric properties of the ortho substituents affected the level of tacticity in the polylactides.     

catena‐Poly[[[aqua[3‐(2‐pyridylsulfanyl)propionato N‐oxide‐κO1]copper(II)]‐μ‐[3‐(2‐pyridylsulfanyl)propionato N‐oxide‐κ3O3:O1,O1′] dihydrate]

In the title complex, {[Cu(C₈H₈NO₃S)₂(H₂O)]·2H₂O}_n, the Cu^II cation has a distorted square‐pyramidal coordination environment consisting of five O atoms, one from a water molecule, one from an N—O group and the other three from the carboxylate groups of two 3‐(2‐pyridylsulfanyl)propionate N‐oxide anions. The aqua[3‐(2‐pyridylsulfanyl)propionato N‐oxide]copper(II) moieties are bridged by 3‐(2‐pyridylsulfanyl)propionate N‐oxide anions to form an infinite three‐dimensional coordination polymer with a zigzag chain structure. The crystal structure is stabilized by hydrogen bonds.     

Closed Pentaaza[9]helicene and Hexathia[9]/[5]helicene: Oxidative Fusion Reactions of ortho‐Phenylene‐Bridged Cyclic Hexapyrroles and Hexathiophenes

Oxidative fusion reactions of ortho ‐phenylene‐bridged cyclic hexapyrroles and hexathiophenes furnished novel closed helicenes in a selective manner. X‐Ray diffraction analysis unambiguously revealed the structures to be a closed pentaaza[9]helicene, the longest azahelicene reported so far, and an unexpected double‐helical structure of hexathia[9]/[5]helicene, whose formation was assumed to result from multiple oxidative fusion along with a 1,2‐aryl shift. The pentaaza[9]helicene exhibited well‐defined emission with high fluorescence quantum yield (Φ _F=0.31) among the known [9]helicenes. Chiral resolution of the racemic pentaaza[9]helicene and hexathia[9]/[5]helicene were achieved by chiral‐phase HPLC and the enantiomers were characterized by circular dichroism spectra and DFT calculations.     

Synthesis of new hetero[1,2,4]thiadiazin‐3‐one S,S‐dioxides and oxazolo[3,2‐b]hetero[1,2,4]thiadiazine S,S‐dioxides as potential psychotropic drugs

A series of 2‐substituted 2H‐thieno[3,4‐e][1,2,4]thiadiazin‐3(4H)‐one 1,1‐dioxides ( 2 ), 2‐substituted 2H‐thieno[2,3‐e][1,2,4]thiadiazin‐3(4H)‐one 1,1‐dioxides ( 3 ), 2‐substituted 4,6‐dihydropyrazolo[4,3‐e]‐[1,2,4]thiadiazin‐3(2H)‐one 1,1‐dioxides ( 4 ), 2‐substituted 2,3‐dihydrooxazolo[3,2‐b]thieno[3,4‐e]‐[1,2,4]thiadiazine 5,5‐dioxides, ( 5 ), 6‐substituted 6,7‐dihydro‐2H‐oxazolo[3,2‐b]pyrazolo[4,3‐e][1,2,4]thia‐diazine 9,9‐dioxides ( 6 ) and 7‐substituted 6,7‐dihydro‐2H‐oxazolo[3,2‐b]pyrazolo[4,3‐e][1,2,4]thiadiazine 9,9‐dioxides ( 7 ) were synthesized as potential psychotropic agents.     

Three‐Component Reaction for Construction of Spiro[indoline‐3,7′‐thiazolo[3,2‐a]pyridines] and Spiro[benzo[4,5]thiazolo[3,2‐a]pyridine‐3,3′‐indolines]

The three‐component reaction of thiazole (benzothiazole), dialkyl but‐2‐ynedioate, and isatinylidene malononitriles in toluene at 110–120°C in a sealed tube afforded a mixture of cis/trans‐isomers of functionalized diastereoisomeric spiro[indoline‐3,7′‐thiazolo[3,2‐a]pyridines] and spiro[benzo[4,5]thiazolo[3,2‐a]pyridine‐3,3′‐indolines] in good yields. Both cis‐isomers and trans‐isomers were successfully separated out and fully characterized with spectroscopy and single crystal determination. Under similar conditions, the three‐component reaction containing 2‐(1,3‐dioxo‐1H‐inden‐2(3H)‐ylidene)malononitrile resulted in spiro[indene‐2,7′‐thiazolo[3,2‐a]pyridine] derivatives.     

Controlled radical polymerization of styrene‐based models of the active site of the [FeFe]‐hydrogenase

Within this study, we report on the first controlled radical polymerization of styrene‐based models of the active site of the [FeFe]‐hydrogenase. Three different model complexes based on styrene were prepared including propanedithiolato‐bridged, 2‐azapropanedithiolato‐bridged, and bifunctional styrene iron complex. These model complexes were copolymerized with styrene using free radical and the reversible addition‐fragmentation chain transfer polymerization method. The polymerization behavior of the hydrogenase models is discussed and analyzed in detail. It could be shown that the model complex can be incorporated into copolymers. The obtained copolymers exhibit narrow molar mass distributions. The presence of the [FeFe]‐hydrogenase models were proven by atomic absorption spectrometry, NMR and IR spectroscopy as well as cyclovoltammetric measurements. It could be shown that the [FeFe]‐hydrogenase mimic copolymers, as well as the monomeric originating complexes exhibit electrocatalytic proton reduction at a low potential of –2.2 V. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Quantitative analysis of 3‐OHB[a]P and (+)‐anti‐BPDE as biomarkers of B[a]P exposure in rats

The aim of this study was to develop an analytical method for the determination the levels of metabolites of benzo[a]pyrene (B[a]P), 3‐hydroxybenzo(a)pyrene (3‐OHB[a]P) and (+)‐anti‐benzo(a)pyrene diol‐epoxide [(+)‐anti‐BPDE, combined with DNA to form adducts], in rat blood and tissues exposed to B[a]P exposure by high‐performance liquid chromatography with fluorescence detection (HPLC/FD), and to investigate the usefulness of 3‐OHB[a]P and (+)‐anti‐BPDE as markers of intragastrical exposure to B[a]P in rats. The levels of 3‐OH‐B[a]P and B[a]P‐tetrol I‐1 released after acid hydrolysis of (+)‐anti‐BPDE in the samples were measured by HPLC/FD. The calibration curves were linear (r² > 0.9904), and the lower limit of quantification ranged from 0.34 to 0.45 ng/mL for 3‐OHB[a]P and from 0.43 to 0.58 ng/mL for (+)‐anti‐BPDE. The intra‐ and inter‐day stability assay data suggested that the method is accurate and precise. The recoveries of 3‐OHB[a]P and (+)‐anti‐BPDE were in the ranges of 73.6 ± 5.0 to 116.5 ± 6.3% and 73.3 ± 8.5 to 141.2 ± 13.8%, respectively. A positive correlation was found between the concentration of intragastrical B[a]P and the concentrations of 3‐OH‐B[a]P and (+)‐anti‐BPDE in the blood and in most of the tissues studied, except for the brain and kidney, which showed no correlation between B[a]P and 3‐OHB[a]P and between B[a]P and (+)‐anti‐BPDE, respectively. A sensitive, reliable and rapid HPLC/FD was developed and validated for analysis of 3‐OHB[a]P and (+)‐anti‐BPDE in rat blood and tissues. There was a positive correlation between the concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the blood and the concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the most other tissues examined. The concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the blood could be used as an indicator of the concentration of 3‐OHB[a]P or (+)‐anti‐BPDE in the other tissues in response to B[a]P exposure. These results demonstrate that 3‐OHB[a]P and (+)‐anti‐BPDE are potential biomarkers of B[a]P exposure, which would also be useful to assess the carcinogenic risks from B[a]P exposure. Copyright © 2015 John Wiley & Sons, Ltd.     

Mono‐ and Binuclear Rhodium and Platinum Complexes of 1, 3, 5‐Trimethyl‐1, 3, 5‐triaza‐2σ3λ3‐phosphorin‐4, 6‐dionyloxy‐substituted Calix[4]arenes

The reaction behaviour of 1, 3, 5‐triaza‐2σ³λ³‐phosphorin‐4, 6‐dionyloxy‐substituted calix[4]arenes towards mono‐ and binuclear rhodium and platinum complexes was investigated. Special attention was directed to structure and dynamic behaviour of the products in solution and in the solid state. Depending on the molar ratio of the reactands, the reaction of the tetrakis(triazaphosphorindionyloxy)‐substituted calix[4]arene ( 4 ) and its tert‐butyl‐derivative ( 1 ) with [(cod)RhCl]₂ yielded the mono‐ and disubstituted binuclear rhodium complexes 2 , 3 , and 5 . In all cases, a C₂‐symmetrical structure was proved in solution, apparently caused by a fast intramolecular exchange process between cone conformation and 1, 3‐alternating conformation. The X‐ray crystal structure determination of 5 confirmed [(calixarene)RhCl]₂‐coordination through two opposite phosphorus atoms with a P ⃜P separation of 345 pm. The complex displays crystallographic inversion symmetry, and the Rh₂Cl₂ core is thus exactly planar. Reaction of 1 and of the bis(triazaphosphorindionyloxy)‐bis(methoxy)‐substituted tert‐butyl‐calix‐[4]arene ( 7 ) with (cod)Rh(acac) in equimolar ratio and subsequent reaction with HBF₄ led to the expected cationic monorhodium complexes 5 and 8 , involving 1, 3‐alternating P‐Rh‐P‐coordination. The cone conformation in solution was proved by NMR spectroscopy and characteristic values of the ¹J(PRh) coupling constants in the ³¹P‐NMR‐spectra. Reaction of equimolar amounts of 4 with (cod)Rh(acac) or (nbd)Rh(acac) led, by substitution of the labile coordinated acetylacetonato and after addition of HBF₄, to the corresponding mononuclear cationic complexes 9 and 10 . Only two of the four phosphorus atoms in 9 and 10 are coordinated to the central metal atom. Displacement of either cycloocta‐1, 5‐diene or norbornadiene was not observed. For both compounds, the cone conformation was proved by NMR spectroscopy. Reaction of 4 with (cod)PtCl₂ led to the PtCl₂‐complex ( 11 ). As for all compounds mentioned above, only two phosphorus atoms of the ligand coordinate to platinum, while two phosphorus atoms remain uncoordinated (proved by δ³¹P and characteristic values of ¹J(PPt)). NMR‐spectroscopic evidence was found for the existence of the cone conformation in the cis‐configuration of 11 .