Layer-by-layer electrostatic self-assembly of single-wall carbon nanotube polyelectrolytes

We have used anionic and cationic single-wall carbon nanotube polyelectrolytes (SWNT-PEs), prepared by the noncovalent adsorption of ionic naphthalene or pyrene derivatives on nanotube sidewalls, for the layer-by-layer self-assembly to prepare multilayers from carbon nanotubes with polycations, such as poly(diallyldimethylammonium) or poly(allylamine hydrochloride) (PDADMA or PAH, respectively), and polyanions (poly(styrenesulfonate), PSS). This is a general and powerful technique for the fabrication of thin carbon nanotube films of arbitrary composition and architecture and allows also an easy preparation of all-SWNT (SWNT/SWNT) multilayers. The multilayers were characterized with vis-near-IR spectroscopy, X-ray photoelectron spectroscopy (XPS), surface plasmon resonance (SPR) measurements, atomic force microscopy (AFM), and imaging ellipsometry. The charge compensation in multilayers is mainly intrinsic, which shows the electrostatic nature of the self-assembly process. The multilayer growth is linear after the initial layers, and in SWNT/polyelectrolyte films it can be greatly accelerated by increasing the ionic strength in the SWNT solution. However, SWNT/SWNT multilayers are much more inert to the effect of added electrolyte. In SWNT/SWNT multilayers, the adsorption results in the deposition of 1-3 theoretical nanotube monolayers per adsorbed layer, whereas the nominal SWNT layer thickness is 2-3 times higher in SWNT/polyelectrolyte films prepared with added electrolyte. AFM images show that the multilayers contain a random network of nanotube bundles lying on the surface. Flexible polyelectrolytes (e.g., PDADMA, PSS) probably surround the nanotubes and bind them together. On macroscopic scale, the surface roughness of the multilayers depends on the components and increases with the film thickness.     

Superhydrophobic surfaces formed using layer-by-layer self-assembly with aminated multiwall carbon nanotubes

A convenient and simple route to functionalized multiwall carbon nanotubes (MWNTs) using the reaction of the amine (NH) groups of polyethyleneimine (PEI) with MWNTs in N,N-dimethylformamide (DMF) at 50 degrees C is described. The product functionalized MWNTs (MWNT-NH-PEI) contain 6-8% by weight PEI based on elemental analysis, thermal gravimetric analysis, and titration. The products form stable emulsions in water below pH 9 and can be derivatized to form alkylated MWNTs that are dispersible in organic media. Such MWNT-NH-PEI nanoparticles can also be used in covalent or ionic layer-by-layer assembly to form nanocomposite thin films on functionalized polyethylene (PE) films and powders. Such nanocomposite films were analyzed by contact angle analysis, atomic force microscopy (AFM), and confocal Raman microscopy. These analyses show that these superhydrophilic surfaces have micro/nanoroughness with a roughly uniform distribution of MWNT nanoparticles. Superhydrophobic PE films can be formed either from ionic layer-by-layer self-assembly of MWNT-NH-PEIs and poly(acrylic acid) or from covalent layer-by-layer self-assembly of MWNT-NH-PEIs and Gantrez if the final graft is acrylated with a mixed anhydride prepared from ethyl chloroformate and octadecanoic acid. The resulting octadecylated surface produced by five covalent layer-by-layer deposition steps has a water contact angle of 165 degrees and a sliding angle of less than 5 degrees. The corresponding surface produced by five ionic layer-by-layer deposition steps has a water contact angle of 155 degrees but exhibits water pinning. The ionically assembled nanocomposite graft is labile under acidic conditions. The covalently assembled graft is more chemically robust.     

Layer-by-Layer electrostatic self-assembly of polyelectrolyte nanoshells on individual carbon nanotube templates

Carbon nanotubes have been featured prominently in the nanotechnology research for some time, yet robust strategies for noncovalent chemical modification of the nanotube surface are still missing. Such strategies are essential for the creation of functional device architectures. Here, we present a new general procedure for carbon nanotube modification based on polyelectrolyte layer-by-layer assembly. We have built multilayer structures around individual carbon nanotube bridges by first modifying the nanotube surface with a pyrene derivative followed by layer-by-layer deposition of polyelectrolyte macroions on the nanotube. Transmission electron microscopy and scanning confocal fluorescence microscopy images confirm the formation of nanometer-thick amorphous polymer nanoshells around the nanotubes. These multilayer polyelectrolyte shells on individual carbon nanotubes introduce nearly unlimited opportunities for the incorporation of various functionalities into nanotube devices, which, in turn, opens up the possibility of building more complex multicomponent structures.     

Alternate layer-by-layer adsorption of single- and double-walled carbon nanotubes wrapped by functionalized beta-1,3-glucan polysaccharides

A great deal of attention has been focused on exploiting novel methods to fabricate thin carbonaceous capsules from multiple components for advanced materials. A layer-by-layer (LbL) method is therefore being introduced to synthesize thin and multi-carbon nanotube (CNT)-based hollow capsules from CNT complexes with cationic or anionic complementarily functionalized beta-1,3-glucans as building-blocks. These ionic beta-1,3-glucans wrap around single-walled carbon nanotubes (SWNTs) and double-walled carbon nanotubes (DWNTs) to form water-soluble complexes with ionic groups on their exterior surface. Alternate self-assembly of these CNT complexes on the silica particles is demonstrated in solution by electrostatic interactions. The LbL adsorption processes were carefully monitored by zeta-potential measurements, frequency shifts of a quartz crystal microbalance (QCM), and electron micrographs. Silica particles were then dissolved away by HF acid to obtain CNT-based hollow capsules composed of SWNTs and DWNTs. We believe that these novel surface adsorption methods are useful for potential design of CNT-based advanced functional materials.     

Synthesis and characterization of polydiacetylene films and nanotubes

We report here the synthesis and characterization of polydiacetylene (PDA) films and nanotubes using layer-by-layer (LBL) chemistry. 10,12-Docosadiyndioic acid (DCDA) monomer was self-assembled on flat surfaces and inside of nanoporous alumina templates. UV irradiation of DCDA provided polymerized-DCDA (PDCDA) films and nanotubes. We have used zirconium-carboxylate interlayer chemistry to synthesize PDCDA multilayers on flat surfaces and in nanoporous template. PDCDA multilayers were characterized using optical (UV-vis, fluorescence, ellipsometry, FTIR) spectroscopies, ionic current-voltage ( I- V) analysis, and scanning electron microscopy. Ellipsometry, FTIR, electronic absorption and emission spectroscopies showed a uniform DCDA deposition at each deposition cycle. Our optical spectroscopic analysis indicates that carboxylate-zirconium interlinking chemistry is robust. To explain the disorganization in the alkyl portion of PDCDA multilayer films, we propose carboxylate-zirconium interlinkages act as "locks" in between PDCDA layers which restrict the movement of alkyl portion in the films. Because of this locking, the induced-stresses in the polymer chains can not be efficiently relieved. Our ionic resistance data from I- V analysis correlate well with calculated resistance at smaller number of PDCDA layers but significantly deviated for thicker PDCDA nanotubes. These differences were attributed to ion-blocking because some of the PDCDA nanotubes were totally closed and the nonohmic and permselective ionic behaviors when the diameter of the pores approaches the double-layer thickness of the solution inside of the nanotubes.     

基于聚硫堇和层层组装碳纳米管/HRP的过氧化氢传感器研究

将电聚合和层层组装方法有效结合构筑了聚硫堇（PTH）电子介体修饰的碳纳米管（CNTs）/辣根过氧化物酶（HRP）多层膜无试剂H2O2传感器.利用电化学阻抗谱对CNTs/HRP多层膜的组装过程进行监测,用循环伏安法和计时电流法研究了该HRP电极的电化学行为.探讨了酶组装层数、工作电位、pH值和碳纳米管对电极响应的影响.该...     

Layer-by-layer growth of attractive binary colloidal particles

We investigate the two-dimensional (2D) colloidal structures formed by oppositely charged polystyrene monolayers grown layer-by-layer, where the electrostatic forces are recruited to assist in the packing of the layers. Our results show a transition through several 2D-superlattices to more close-packed structures with increasing ionic strength. The observed geometrical packing constraints of the 2D-superlattice structures agree well with the estimated Debye screening length of the electric double layer. By tuning interaction forces between charged colloids, electrostatic interactions could enhance the template-directed self-assembly process to achieve more complex and diverse structures.     

单晶CaSO4纳米管的制备——非片状结构化合物形成纳米管的新途径

以Ti-O-Ti油酸偶合体作为结构引导生长剂,采用溶剂热技术成功地制备了单晶无水硫酸钙纳米管,并通过XRD、X射线能谱(EDX)、TEM、选区电子衍射(CBED)对CaSO₄纳米管进行了表征.其晶格常数与JCPDS标准卡单斜相CaSO₄晶体数值一致,属P3m1(164)空间群.纳米管呈均匀的直管形,直径约为30nm,内径约为10nm,长度达到3.0μm.并对硫酸钙纳米管的形成机理进行了浅析,提出了非片状结构的离子晶体,通过结构引导生长剂诱导生长成为片状结构,在溶剂热条件下弯曲、旋转、卷拢形成纳米管的新方法.     

Surface plasmon fluorescence investigation of energy-transfer-controllable organic thin films

Thin functional organic films on a gold substrate were fabricated by adsorbing tetrakis(carboxyphenyl)porphyrin (TCPP) on a spacer layer, which was prepared by the layer-by-layer adsorption of a dendrimer and a linear polymer. The thickness and photoluminescence of the films were investigated by surface plasmon resonance and surface plasmon fluorescence techniques, respectively. TCPP adsorbed on the spacer layer in aqueous solutions of different ionic strengths resulted in a thick TCPP adlayer at high ionic strength and a shrunk spacer layer at low ionic strength. The fluorescence was quenched at high ionic strength but could be observed at low ionic strength. The effects are explained by the states of dye aggregation. This study shows the control of energy transfer from a metal surface to a dye layer by changing the dye adlayer. It can contribute to the development of molecular devices involving energy-transfer systems.     

Highly flexible polyelectrolyte nanotubes

A pressure-filter-template approach was employed to prepare polyelectrolyte nanotubes through layer-by-layer deposition in the alumina template. With the thicker wall, the ordered polymer nanotubes possess a high flexibility. The results demonstrate that the electrostatic interactions of polyelectrolytes play a key role in fabricating water-soluble charged polymer nanotubes. The structure of the polyelectrolyte nanotube was confirmed by SEM, TEM, and UV, respectively.     

Loading of hydrophobic materials into polymer particles: implications for fluorescent nanosensors and drug delivery

A straightforward method for loading hydrophobic materials into commercially available polymer nano- or microparticles is described. PMMA and PS nano/microparticles were swelled by an organic solvent with an ionic surfactant (SDS) to stabilize the particles in aqueous solution. FITC and Ru(dpp)3Cl2 were loaded into those particles based on the principle of "like dissolves like". Further surface modification of the loaded particles was achieved via layer-by-layer (LbL) self-assembly. Culture of fibroblasts with the dye-doped, coated particles showed that the cells internalized the fluorescent particles with no apparent toxic effects. The findings suggest the facile process could be useful in a wide range of applications for fluorescent micro/nanosensors and drug delivery.     

Stabilization of layer-by-layer engineered multilayered hollow microspheres

Polymer multilayered hollow microspheres prepared by layer-by-layer (LbL) self-assembly attract more and more interest due to their unique application, especially as drug delivery system (DDS). Unfortunately, the multilayered hollow microspheres assembled via weak linkages could fuse and/or aggregate in high ionic strength media or strong acidic or basic media. This severely restricts the practical applications of the multilayered hollow microspheres as DDS in human physiological medium. In the present work, the progress in stabilization of the multilayered hollow microspheres is reviewed, with emphasis on the assembling process and their crosslinking mechanism.     

Preparation parameter development for layer-by-layer assembly of Keggin-type polyoxometalates

Polyoxometalates possess many useful properties for electrochemical catalysis. These molecule-size clusters can be assembled into thin films through the layer-by-layer method. In this study, we determined a cluster concentration range within which layer-by-layer (LbL) films have been successfully fabricated. We also find the influence of salt added to the deposition solutions. In an attempt to understand the self-assembly process at the molecular level, thermodynamic arguments, derived from complexation between nanoscale particles and oppositely charged polyelectrolyte chains, have been employed to interpret the adsorption of polyoxometalate clusters onto a cationic polymer layer. The scaling results describe the contact mode between a polymer chain and a cluster. The assembly can be visualized with assistance by understanding the contact between the polymer chain and the cluster.     

Directed Self-assembly of Vertical PS-b-PMMA Nanodomains Grown on Multilayered Polyelectrolyte Films

Layer-by-layer polyelectrolyte self-assembly, a common method for preparing high-quality ultra-thin films, was employed to direct the self-assembly behavior of polystyrene-block-poly(methyl methacrylate)(PS-b-PMMA) block copolymer for the first time. Differing from the previous neutral polymer brushes anchored to silicon substrates via chemical modification, polyelectrolyte multilayers(PEMs) were anchored by electrostatic interaction and provided a stable, smooth, and neutral interface. In the present study, PS-b-PMMA was deposited on poly(acrylamide hydrochloride)/poly(acrylic acid)(PAH/PAA) PEMs prepared by layer-by-layer self-assembly to successfully yield vertical nanodomains after thermal annealing. Seven layered PEMs revealed an excellent, smooth surface, with a low roughness of 0.6 nm. The periodic structure with interlamellar spacing of 47 nm was determined by grazing-incidence small-angle X-ray scattering(GISAXS). The morphology of the PS-b-PMMA nanodomains depended on the polyanion-to-polycation concentration ratio, which is related to the interaction between the block copolymer and the substrate. Our results demonstrate that layer-by-layer self-assembly is a helpful method for the phase separation of block polymers and the fabrication of vertical, ordered nanodomains.     

含乳糖聚电解质靶向微胶囊的层层自组装构筑

设计合成了己二酸乳糖乙烯酯/对苯乙烯磺酸钠共聚物（PLESS）,通过层层自组装技术构筑聚烯丙基胺盐酸盐（PAH）与含乳糖聚电解质PLESS的靶向微胶囊。以紫外-可见吸收光谱监测了PAH与PLESS在平面的石英片进行层层自组装过程,研究了不同实验条件（聚电解质浓度、溶液盐度、盐种类）对PAH/PLESS多层膜自组装的影响;PAH与PLESS在球形碳酸钙微球模板上层层自组装,去除模板后得到层状结构的微胶囊,用透射电镜（TEM）等方法观察其形态形貌;通过花生凝集素识别考察其潜在靶向性;通过细胞MTT活性试验评价其生物相容性。     

Can nature's design be improved upon? High strength, transparent nacre-like nanocomposites with double network of sacrificial cross links

The preparation of a high-strength and highly transparent nacre-like nanocomposite via layer-by-layer assembly technique from poly(vinyl alcohol) (PVA) and Na+-montmorillonite clay nanosheets is reported in this article. We show that a high density of weak bonding interactions between the polymer and the clay particles: hydrogen, dipole-induced dipole, and van der Waals undergoing break-reform deformations, can lead to high strength nanocomposites: sigmaUTS approximately 150 MPa and E' approximately 13 GPa. Further introduction of ionic bonds into the polymeric matrix creates a double network of sacrificial bonds which dramatically increases the mechanical properties: sigmaUTS approximately 320 MPa and E' approximately 60 GPa.     

层层自组装技术制备PDDA-多壁碳纳米管-胆碱生物传感器

以PDDA分散多壁碳纳米管(MWCNTs),制得PDDA-MWCNTs悬浮液,采用层层自组装技术将PDDA-MWCNTs与胆碱氧化酶(ChOx)交替组装在铂(Pt)电极上,最后滴加Nafion制备抗干扰膜,构建了电流型胆碱生物传感器。实验结果表明,构建的复合酶膜(PDDA-MWCNTs/ChOx)n对底物胆碱的催化电流随着组装层数增多而明显增大,酶膜组装6层时最优。此传感器在5×10-6～2.5×10-4mol/L浓度范围内对胆碱有良好线性范围,响应时间为6.6s;灵敏度为21.97μA/mmol;检出限为2×10-6mol/L(S/N=3),RSD<5%,且传感器抗干扰能力强、稳定性好。     

Layer-by-layer electrostatic self-assembly of anionic and cationic carbon nanotubes

<正>The layer-by-layer(LBL) self assembly of anionic and cationic multi-walled carbon nanotubes(MWNTs) through electrostatic interaction has been carried out to fabricate all-MWNT multilayer films.The alternate uniform assembly of anionic and cationic MWNTs was investigated by UV-vis spectroscopy.Scanning electron microscopy(SEM) images displayed the growth of the MWNT films.     

Hierarchical structure of carbon nanotube networks

The hierarchical structure of semidilute suspensions of single-walled carbon nanotubes in polymeric matrices, studied by the use of ultrasmall and small angle neutron scattering, indicates an aggregate size that is independent on both nanotube concentration and polymer matrix and a mesh within the floc that becomes slightly denser with increasing nanotube concentration. The number of clusters grows linearly with concentration of nanotubes. These structural parameters suggest that the interactions between the flocs dictate the concentration-dependent elastic strength scaling of the network, with the absolute values of the specific elastic strength being inversely related to the percolation threshold.     

Porphyrin nanotubes by ionic self-assembly

Porphyrin nanotubes are made by ionic self-assembly of two oppositely charged synthetic porphyrin molecules. The diameter of the nanotubes can be altered by modifying the structure of one of the porphyrin tectons. The nanotubes are photocatalytically active, mechanically responsive to light, and are composed of J-aggregates that exhibit resonance light scattering.