粗糙海面及其上方导体目标复合电磁散射的混合算法研究

利用基于电流计算的矩量法结合高频算法基尔霍夫近似的混合算法,分析了一维PM谱粗糙海面及其上方二维无限长任意截面导体目标的双站复合电磁散射特性.混合算法将粗糙面和目标分别划分到KA区域和MOM区域,由于无需数值求解粗糙海面区域的表面极化电流,该算法的运算时间和对计算机内存的需求主要取决于粗糙面上方目标的网格划分情况.数值结果以无限长导体圆柱为例计算了其与一维下垫PM谱粗糙海面的复合双站散射截面,并将计算结果与经典MOM结果进行了比对和验证,结果表明混合方法具有较高的计算效率.最后应用混合方法讨论了不同极化状态、海上不同风速以及目标不同尺寸和位置对复合散射截面的影响. 关键词： 粗糙海面 电磁散射 混合算法 矩量法     

时域混合算法在一维海面与舰船目标复合电磁散射中的应用

采用时域积分方程(TDIE)与时域基尔霍夫近似(TDKA)的混合算法研究粗糙海面与舰船目标的复合瞬态电磁散射.该方法将舰船目标及其近邻海面划分为TDIE区域,用TDIE方法精确求解;将剩余电大尺寸的粗糙海面划分为TDKA区域,采用高效的TDKA电流近似求解.通过混合算法和传统TDIE算法结果的对比,表明TDIE-TDKA混合算法能保证计算的精度,同时具有较高的计算效率.最后,讨论了海面上方有无目标、海面上方风速、电磁脉冲入射角、舰船目标尺寸、吃水深度对后向散射磁场的影响.     

粗糙海面与其上方多目标复合散射的混合算法

针对粗糙海面与其上方多目标复合的情形,常用算法存在计算量过大、计算时间太长等缺点,本文采用基尔霍夫近似法与矩量法结合的混合算法可以大大简化计算量、节省时间.本文首先通过蒙特卡罗的方法模拟一维PM粗糙海面,并与粗糙海面上方多目标建立复合模型;然后对矩量法结合基尔霍夫近似法的混合算法做了详细的公式推导,得到了复合散射系数,并且分析了不同入射角、目标高度、目标间距、目标尺寸、风速等参数对复合电磁散射特性的影响.实验结果表明,针对粗糙海面与其上方多目标复合的情形,采用矩量法结合基尔霍夫近似法的混合算法不但可以保证准确性,而且可以大幅度减少计算所用时间(混合算法用时占矩量法的19%),对大尺寸粗糙面和复杂的复合模型优势尤为明显.     

二维导体微粗糙面与其上方金属平板的复合电磁散射研究

研究了二维导体微粗糙面与其上方金属平板复合电磁散射特征.应用互易性原理使求解二次散射场简化为求解包含平板上的极化电流和微粗糙面散射场的积分方程，从而降低了求解难度.应用物理光学近似和微扰法分别求解了平板上的极化电流和粗糙面的电磁散射场，得到了复合散射截面计算公式并进行了数值计算.尤其对该复合模型后向耦合电磁散射结果进行了详细分析和讨论. 关键词： 互易性原理 复合电磁散射 微粗糙面 平板     

有限元-边界法在光电目标散射计算中的应用

为了解决三维目标电磁散射计算中准确性与有效性的矛盾,建立了有限元-边界法的计算模型,对三维腔体目标的电磁散射计算方法进行了研究。首先,分析了针对三维电磁腔体目标的电磁散射计算边界积分方法,引入了矢量格林函数,利用麦克斯韦方程得到电磁场形式与三维腔体形式的关系,建立了三维开口腔体边界模型;然后,结合光电目标曲面建模方法及高阶基函数的方法,建立了三维光电目标的有限元泛函,完成了有限元-边界法在三维腔体目标电磁散射计算中的应用;最后,进行了实例验证。分析显示,当三维腔体内部为空或为各向异性物质时,角度吻合非常理想,与传统模式匹配法所得结果的吻合度达90%以上。结果表明,采用本方法对三维腔体目标进行电磁散射计算,准确度、效率均有所提高。     

三维目标与粗糙面复合散射的广义稀疏矩阵平面迭代及规范网格算法

提出了快速计算二维导体粗糙面与面上金属目标复合散射的广义稀疏矩阵平面迭代及规范网格法(G-SMFSIA/CAG).推导了二维导体粗糙面与面上目标相互作用的耦合积分方程,用稀疏矩阵平面迭代及规范网格法(SMFSIA/CAG)求解粗糙面部分的表面积分方程,而用基于RWG基函数的矩量法(MOM)计算目标部分的表面积分方程,并通过更新方程的激励项迭代求解目标与粗糙面的相互耦合作用.结合Monte-Carlo方法产生具有PM(Pierson-Moskowitz)海浪谱的随机海洋粗糙面,数值分析了海面上不同形状导体目 关键词： 复合散射 广义稀疏矩阵平面迭代及规范网格法 随机海洋粗糙面 双站散射系数     

指数型粗糙地面与上方矩形截面柱宽带电磁散射的时域有限差分法研究

采用土壤介电常数的四成分模型表示实际地面的介电特性,应用指数型分布粗糙面模型和Monte Carlo方法模拟实际的粗糙地面,运用时域有限差分方法研究了微分高斯脉冲波照射时粗糙地面与上方目标的宽带电磁散射问题,得出了后向复合散射系数的频率响应曲线,计算了后向复合散射系数随粗糙地面高度起伏均方根、相关长度、土壤湿度、目标尺寸、高度、倾角等几何参数及介电参数等的变化情况,并做了详细分析与讨论,得到了指数型粗糙地面与上方目标宽带电磁散射特性.     

高频电磁波多次散射的数值求解

结合等效射线管模型和物理光学法实现了复杂目标高频电磁波多次散射高效且精确的数值求解.在求解射线管的电磁场积分中，选取物体表面为积分区域，详细推导了在物体表面完成的远场积分公式，数值计算结果比前人沿射线管波前积分更精确.计算了几种由平板构成的导体和涂覆介质目标，数值求解结果与已有的实验数据相当符合.该结果可为复杂目标的雷达探测和识别提供理论参考. 关键词： 电磁散射 电磁场积分方程 物理光学法     

海面与其上方双矩形截面柱复合散射的混合算法研究

采用Pierson-Moscowitz(PM)海谱和Monte Carlo方法模拟实际的粗糙海面, 基于矩量法和基尔霍夫近似的混合算法研究了海面与其上方双矩形截面导体柱的复合电磁散射特性, 得出了复合散射系数的角分布曲线, 计算了复合散射系数随海面参数、矩形截面柱参数以及入射波参数的变化情况, 并做了详细分析与讨论, 得到了PM谱海面与其上方双矩形截面柱复合散射特性. 结果表明, 与单纯的矩量法相比较, 采用基于矩量法和基尔霍夫近似的混合算法, 既可获得较高的准确性, 同时又可减少计算时间和内存占用量, 而且粗糙面尺度越大该优势越明显.     

应用高阶有限元-局部共形完全匹配层算法分析电磁散射问题

提出局部共形完全匹配层在高阶有限元中的实现方法,用于分析三维电磁散射问题.基于定义在局部高阶单元上的实坐标、复坐标以及参数坐标三者之间的映射关系,局部共形完全匹配层不仅能够贴近复杂结构散射体的外廓形状设置截断区域,有效地缩减有限元分析区域,而且由于保证了较高的几何拟合精度,可以有效地提高数值计算结果的准确性.利用这种结合局部共形完全匹配层的高阶有限元方法分析不同目标的电磁散射特性,数值结果表明方法的正确性和有效性.     

Investigation on scattering from a plasma-coated target over a rough sea surface using a multi-hybrid method

An iterative strategy combining the Kirchhoff approximation (KA) with the hybrid finite element–boundary integral (FE-BI) method is presented to consider electromagnetic scattering from a coated target above a rough sea surface. The multi-hybrid method considers the multiple-scattering interactions between target and underlying surface based on equivalent principle and currents updating scheme. The hybrid FE-BI-KA method, which is an improved and generalized version of a previous KA–Method of Moments (MoM) technique, can deal with an inhomogeneous target. Numerical results are given to evaluate the validity of the multi-hybrid technique, and then the hybrid method is employed to investigate electromagnetic scattering from a plasma-coated airfoil above a rough sea surface, including the effects of several key parameters on stealth performance, such as plasma angular frequency and electron collision frequency.     

雪层覆盖地面电磁散射的矩量法

为实现分层介质粗糙面电磁散射的矩量法研究,给出一种分层介质粗糙面电磁积分方程的区域分解方法.将格林定理应用于粗糙面所分的各子空间,结合波动方程和格林函数推导分层粗糙面的电磁积分方程,利用矩量法对其进行离散,数值计算得到雪层覆盖地面散射系数的角分布曲线,其中,粗糙表面由一维带限Weierstrass分形谱和Monte Carlo方法模拟.通过与时域有限差分法数值结果的比对,验证该方法的准确性,并分析散射系数随雪和地面参数、介质参数以及入射波参数的变化,获得了较完整的散射特征.     

三维粗糙面电磁双站散射的直接型区域分解计算

提出三维粗糙面双站电磁散射的直接型有限元-区域分解方法.首先建立含有迭代Robin边界条件(IRBC)的区域分解法耦合模型,再用内视法导出高度稀疏分块的分区耦合矩阵,之后给出缩减耦合矩阵带宽的子区域排序方法和IRBC的FFT加速算法.用有限元-完全匹配层和未分区的有限元-IRBC方法验证数值结果.     

Numerical simulation of the EM scattering and Doppler spectrum of a low flying target above dynamic oceanic surface by using the FEM-DDM method

The Doppler (DP) spectrum of a moving target such as a ship, an iceberg or an air-plane above dynamic oceanic surfaces[1—3] is one of the most important subjects for ra-dar oceanic surveillance, target tracking and oceanic remote sensing[4—7]. With the ad-vancement of oceanic remote sensing and radar surveillance, the experimental observa-tion and theoretical modeling of oceanic clutter have been extensively studied, e.g. by using oceanic field measurement, wave tank experiment and some stud…     

土壤表面与部分埋藏多目标复合散射的时域有限差分方法

采用Dobson半经验模型和电介质复介电常数表示土壤介电常数的实部和虚部,用指数型分布粗糙面和Monte Carlo方法模拟土壤表面,运用时域有限差分方法研究土壤表面与部分埋藏多个矩形截面混凝土柱复合模型的电磁散射.结果表明：复合散射系数随散射角振荡变化;土壤表面高度起伏均方根、土壤含水率、目标介电常数、入射角对复合散射系数影响较大;土壤表面相关长度、目标截面宽度、高度、间距、倾角对复合散射系数影响较小;目标埋藏深度对复合散射系数几乎没有影响.与其他数值计算方法比较,采用时域有限差分方法既可获得较高的准确性,又可减少计算时间和内存占用量.可以用来计算地、海粗糙面与附近任意多目标的复合散射.     

A hybrid method of solving near-zone composite eletromagnetic scattering from targets and underlying rough surface

For composite electromagnetic(EM) scattering from rough surface and target above it in near-field condition,modified shooting and bouncing ray(SBR) method and integral equation method(IEM),which are analytic methods combined with two-scale model for rough surface,are proposed to solve the composite near-field scattering problems.And the modified method is verified in effectiveness and accuracy by comparing the simulation results with measured results.Finally,the composite near-fielding scattering characteristics of a slanted plane and rough water surface below are obtained by using the proposed methods,and the dynamic tendency of composite scattering characteristics versus near-fielding distance is analyzed,which may have practical contribution to engineering programs in need of radar targets near-field characteristics under extra-low-altitude conditions.     

Hybrid method for investigation of electromagnetic scattering from conducting target above the randomly rough surface

A current based hybrid method (HM) is proposed which combines the method of moment (MOM) with the Kirchhoff approximation (KA) for the analysis of scattering interaction between a two-dimensional (2D) infinitely long conducting target with arbitrary cross section and a one-dimensional (1D) Gaussian rough surface. The electromagnetic scattering region in the HM is split into KA region and MOM region. The electric field integral equation (EFIE) in MOM region (target) is derived, the computational time of the HM depends mainly on the number of unknowns of the target. The bistatic scattering coefficient for the infinitely long cylinder above the rough surface with Gaussian roughness spectrum is calculated, and the numerical results are compared and verified with those obtained by the conventional MOM, which shows the high efficiency of the HM. Finally, the influence of the size, location of the target, the rms height and correlation length of the rough surface on the bistatic scattering coefficient with different polarizations is discussed in detail.     

Application of a multiregion model to the EM scattering from a rough surface with or without a target above it

An efficient multiregion model is introduced to calculate the electromagnetic scattering from a perfectly electrical conducting(PEC) rough surface with or without a PEC target above it.In the multiregion model,the rough surface is split into multiple regions depending on their position along the rough surface.Two intermediate regions are chosen as the dominant region.If a target is located above the rough surface,the target will also be included in the dominant region.The method of moments(MOM) is only adopted on the dominant region to ensure validity.Hence,the new model can greatly reduce the number of unknowns associated with full MOM analysis.The induced electric currents on the other regions are obtained by approximately considering the mutual coupling between different regions along the rough surface.Compared with the published hybrid method,this new model is not only suitable for EM scattering from a target above a rough surface but also applicable for just rough surfaces.Several numerical simulations are presented to show the validity and efficiency of the multiregion model.