A New Dual-electrode and Multi-channel Electrochemical Detection System for Capillary Electrophoresis

A new type of dual-electrode and multi-channel electrochemical detection technology for capillary electrophoresis is described in this paper.Two detectors(the amperometric detector and the conductometric detector) or two conductometric detectors are connected to the same capillary electrophoresis system.The whole system possesses the advantages of the two electrochemical detectors including sparing time,improving the analytical speed and expanding the sample range.The working electrode and detector cell are handled easily.The system was applied to sample detection with satisfactory results.     

一种基于双工作电极-双通道的毛细管电泳电化学检测系统

报道了一种双工作电极-双通道毛细管电泳电化学检测系统，实现电导和安培 同时检测或者安培与安培检测联用，使两种方法相互补充，发挥各自的优势。其中 ，工作电极与检测池的制作工艺简单，操作简便，通过不锈钢针管和毛细管作为套 管，无需三维微调装置即可简单实现双工作电极的准确放置及分离毛细管与工作电 极的准确对接，并根据分析体系的需要采用不同类型的工作电极和检测器；同时采 用复式滤波电路解决了不同检测器之间的电场叠加对输出信号的干扰问题。采用该 装置可以同时检测复杂体系中的电活性和惰性物质，或同时测定只能氧化或只能还 原的物质，还可以对具有氧化还原性质的物质进行纯度的确证。将该装置应用于实 际样品的测定，节约了分析时间，提高了分析速度，扩大了检测范围，结果令人满 意。     

Study of the peak broadening due to detection in the electrophoretic separation of DNA by CE and microchip CE and the application of image sensor for ultra‐small detection cell length

Narrow peaks are important to high‐resolution and high‐speed separation of DNA fragments by capillary electrophoresis and microchip capillary electrophoresis. Detection cell length is one of the broadening factors, which is often ignored in experiments. However, is it always safe to neglect detection cell length under any condition? To answer this question, we investigated the influence of detection cell length by simulation and experiments. A parameter named as detection cell length ratio was proposed to directly compare the detection cell length and the spatial length of sample band. Electrophoretic peaks generated by various detection cell length ratios were analyzed. A simple rule to evaluate the peak broadening due to detection cell length was obtained. The current states of the detection cell length of detection system and their reliabilities in capillary electrophoresis and microchip capillary electrophoresis were analyzed. Microchip capillary electrophoresis detection with an ultra‐small detection cell length of 0.36 μm was easily achieved by using an image sensor.     

毛细管电泳多道电化学检测器的研制及其应用

报道了毛细管电泳多道电化学检测器的研制及其应用，安培检测器和电导检测器并联在同一毛细管电泳检测系统中，在同一缓冲体系，同一工作电极下对同一复杂的分析体系同时进行电导和安培检测；整个装置综合了电导检测和安培检测两种检测器的优点，性能优良，造价低廉，对实际样品的检测取得了令人满意的结果。     

超高速平板通道毛细管电泳

超高速平板通道毛细管电泳是９０年代发展的一种秒级分离的新颖技术。应用现代微电子光刻技术将化学反应。进样、分离和检测等组合在数厘米玻片上。实现分离分析的小型化、集成化、一体化和自动化。     

毛细管电泳与芯片毛细管电泳的双检测技术

综述了毛细管电泳和芯片毛细管电泳的3种双检测技术,包括荧光-散射等光学双检测技术、安培-非接触电导等电化学双检测技术和荧光-非接触电导等光电联用双检测技术.介绍了3种双检测方法的仪器的检测原理及应用,并展望了双检测技术的发展前景.引用文献54篇.     

毛细管电泳柱端盘状电极安培检测区带展宽的定量分析

从理论上分析了影响毛细管电泳法端盘状电极安培区检测区带展宽的诸因素，给出了区带展宽的模拟公式，通过实验考察了进样量，分离电压，检测器体体积对区带展宽的影响并验证了模拟公式。     

单细胞的毛细管电泳分析

对单细胞分析化学中毛细管电泳分离技术的进样方式、检测器、应用和前景予以综述,４６篇。     

毛细管电泳多道电化学检测工作站

设计的毛细管电泳多通道电化学检测系统是一个可供在同一个检测环境下，用多台电化学检测器循环对物质进行测定的工作站。工作站采用计算机控制，利用电导和伏安检测器对样品同时进行电导、氧化和还原检测，并实时对数据进行采集，处理，以图形方式显示。     

毛细管电泳光学检测器的进展

对毛细管电泳的光学检测器作了简要评述。根据所采用的检测原理。光源检测器可分为紫外检测器，激光诱导荧光检测器、化学肆光检测器、荷耦合器件检测器、折射指数检测器等许多种类，具有简单方便、使用广泛，信息量较大等特点，是一类有良好诉检测器。     

Recent developments in electrochemical flow detections—A review: Part I. Flow analysis and capillary electrophoresis

Recent years have provided numerous new examples of applying flow-through electrochemical detectors in chemical analysis. This review, based on about 250 original research papers cited from the current analytical literature, presents their application in flow analysis and capillary electrophoretic methods. Example applications are also given for arrays of electrochemical sensors in flow analysis and electrochemical detection in microfluidic systems. Potentiometric detection with ion-selective electrodes predominates in flow analysis carried out mostly in a flow-injection system, while amperometric and conductivity detections are most commonly employed in capillary electrophoresis.     

Band broadening of DNA fragments isolated by polyacrylamide gel electrophoresis in capillary electrophoresis

Polyacrylamide gel electrophoresis (PAGE) is used frequently for isolation and purification of DNA fragments. In the present study, DNA fragments extracted from polyacrylamide gels showed significant band broadening in capillary electrophoresis (CE). A pHY300PLK (a shuttle vector functioning in Escherichia coli and Bacillus subtilis) marker, which contained nine fragments ranging from 80 to 4870 bp, was separated by PAGE, and each fragment was isolated by phenol/chloroform extraction and ethanol precipitation. After extraction from the polyacrylamide gel, the peaks of the isolated DNA fragments exhibited band broadening in CE, where a linear poly(ethylene oxide) was used as a sieving matrix. The theoretical plate numbers of the DNA fragments contained in the pHY300PLK marker were >10⁶ for all the fragments before extraction. However, the DNA fragments extracted from the polyacrylamide gel showed decreased theoretical plate numbers (5–20 times smaller). The degradation of the theoretical plate number was significant for middle sizes of the DNA fragments ranging from 489 to 1360 bp, whereas the largest and smallest fragments (80 and 4870 bp) had no obvious influence. The band broadening was attributed to contamination of the DNA fragments by polyacrylamide fibers during the separation and extraction process.     

Performance of a sound card as data acquisition system and a lock-in emulated by software in capillary electrophoresis

The performance of fluorescence detectors in capillary electrophoresis is maximized when the excitation light intensity is modulated in time with optimal frequencies. This is especially true when photomultiplier tubes are used to detect the fluorescent light. The photomultiplier tube amplified raw output signal can in principle be captured directly by a personal computer sound card (PCSC) and processed by a lock-in emulated by software. This possibility is demonstrated in the present work and the performance of this new setup is compared with a traditional data acquisition system. The results obtained with this “PCSC and lock-in emulated by software” were of the same quality or even better compared to that obtained by conventional time integrators (Boxcars) and data acquisition boards. With PCSC the limits of detection (LOD) found for both naphthalene-2,3-dicarboxaldehyde-derivatized tyrosine and alanine were 3.3 and 3.5 fmol (injection of 5 nL of samples at 0.66 and 0.70 μmol/L), respectively. This is at least three times better compared to conventional systems when light emitting diodes (LEDs) are used as the excitation source in fluorescence detectors. The PCSC linear response range was also larger compared to conventional data acquisition boards. This scheme showed to be a practical and convenient alternative of data acquisition and signal processing for detection systems used in capillary electrophoresis.     

Capillary electrophoresis: An integrated system with a unique split-flow sample introduction mechanism

The performance of an integrated capillary electrophoresis system with a novel split-flow sample injection mechanism and special high sensitivity UV absorbance detector is described. Sample introduction into the capillary is accomplished with a standard HPLC-type microliter syringe. The injected sample is divided proportionally between the separation capillary and an adjustable splitvent. The volume of sample introduced into the capillary can be manipulated by varying the length or the i.d. of the splitvent tubing; or the volume of sample injected. Data are presented showing reproducibility of retention time, peak height, and peak area; minimum detectability; and operation at short UV wavelengths.     

Miniaturization of separation techniques using planar chip technology

Miniaturization of separation columns implies equally reduced vol- umes of injectors, detectors, and the connecting channels. Planar chip technology provides a powerful means for the fabrication of micron-sized structures such as channels. This is demonstrated by two examples. An optical absorbance detector chip exhibits the expected behavior of a 1 mm optical path length cell despite its volume of 1 nL. A capillary electrophoresis device allows integrated injections of 100 pL samples, efficiencies of 70,000 to 160,000 theoretical plates in 10 to 20 seconds, and external laser-induced fluorescence detection at any capillary length of choice between 5 and 50 mm.     

毛细管电泳在火炸药分析中的应用

综述了近年来毛细管电泳在火炸药领域的应用现状，包括各种分离模式、检测器以及毛细管电泳芯片的应用，并对该技术在火炸药分析中的应用前景作了展望，提出了新的发展方向。引用文献45篇。     

Incorporation of Disposable Screen‐Printed Electrodes for Use in Capillary Electrophoresis End‐Column Amperometric Detection System

The development and performance of an end‐column amperometric detection system integrated with disposable screen‐printed electrodes for capillary electrophoresis is presented. In this system, the electrode and capillary can be easily replaced and the capillary/electrode alignment procedure is straightforward. The use of easily replaceable screen‐printed electrodes offers a tremendous benefit for capillary electrophoresis applications requiring frequent replacement of the working electrode due to fouling. This simple and convenient system is very attractive for routine analyses by capillary electrophoresis with electrochemical detection. The separation and determination of uric acid in human urine is presented.     

Carbon nanotube and diamond as electrochemical detectors in microchip and conventional capillary electrophoresis

As two important polymorphs of carbon, carbon nanotube (CNT) and diamond have been widely employed as electrode materials for electrochemical sensing. This review focuses on recent advances and the key strategies in the fabrication and application of electrochemical detectors in microchip and conventional capillary electrophoresis (CE) using CNT and boron-doped diamond. The subjects covered include CNT-based electrochemical detectors in microchip CE, CNT-based electrochemical detectors in conventional CE, boron-doped diamond electrochemical detectors in microchip CE, and boron-doped diamond electrochemical detectors in conventional CE. The attractive properties of CNT and boron-doped diamond make them very promising materials for the electrochemical detection in microchip and conventional CE systems and other microfluidic analysis systems.     

A Capillary Electrophoresis End‐Column Amperometric Detection System Incorporating Disposable Copper‐Plated Screen‐Printed Carbon Electrodes

We report here the development of copper‐plated screen‐printed carbon electrodes (designated as Cu‐SPE) to employ as electrochemical detectors for the determination of sugars by capillary electrophoresis (CE). A simple end‐column amperometric detection system with easily exchangeable (or even disposable) electrode and capillary in CE is described in this study. A complex alignment procedure was not required in this system based on the end‐column electrode arrangement using an 85 cm length and 20 μm (i.d.) capillary. The optimized separation voltage and applied potential were 9 KV and 0.4 V (vs. Ag/AgCl), respectively, for the detection of sugars using the Cu‐SPE. Good resolution was obtained by this proposed system with migration times of 28.8, 29.5, 29.9, 30.7, 31.2, and 32.0 min for galactose, glucose, arabinose, fructose, xylose, and ribose, respectively.     

Open source capillary electrophoresis

Open source paradigm is becoming widely accepted in scientific communities and open source hardware is finding its steady place in chemistry research. In this review article, we provide the reader with the most up‐to‐date information on open source hardware and software resources enabling the construction and utilization of an “open source capillary electrophoresis instrument”. While CE is still underused as a separation technique, it offers unique flexibility, low‐cost, and high efficiency and is particularly suitable for open source instrumental development. We overview the major parts of CE instruments, such as high voltage power supplies, detectors, data acquisition systems, and CE software resources with emphasis on availability of the open source information on the web and in the scientific literature. This review is the first of its kind, revealing accessible blueprints of most parts from which a fully functional open source CE system can be built. By collecting the extensive information on open source capillary electrophoresis in this review article, the authors aim at facilitating the dissemination of knowledge on CE within and outside the scientific community, fosters innovation and inspire other researchers to improve the shared CE blueprints.