Unusual Aggregation‐Induced Emission of a Coumarin Derivative as a Result of the Restriction of an Intramolecular Twisting Motion

Aggregation‐induced emission (AIE) is commonly observed for propeller‐like luminogens with aromatic rotors and stators. Herein, we report that a coumarin derivative containing a seven‐membered aliphatic ring (CD‐7) but no rotors showed typical AIE characteristics, whereas its analogue with a five‐membered aliphatic ring (CD‐5) exhibited an opposite aggregation‐caused quenching (ACQ) effect. Experimental and theoretical results revealed that a large aliphatic ring in CD‐7 weakens structural rigidity and promotes out‐of‐plane twisting of the molecular backbone to drastically accelerate nonradiative excited‐state decay, thus resulting in poor emission in solution. The restriction of twisting motion in aggregates blocks the nonradiative decay channels and enables CD‐7 to fluoresce strongly. The results also show that AIE is a general phenomenon and not peculiar to propeller‐like molecules. The AIE and ACQ effects can be switched readily by the modulation of molecular rigidity.     

High-Performance Quinoline-Malononitrile Core as a Building Block for the Diversity-Oriented Synthesis of AIEgens

In vivo fluorescent monitoring of physiological processes with high-fidelity is essential in disease diagnosis and biological research, but faces extreme challenges due to aggregation-caused quenching (ACQ) and short-wavelength fluorescence. The development of high-performance and long-wavelength aggregation-induced emission (AIE) fluorophores is in high demand for precise optical bioimaging. The chromophore quinoline-malononitrile (QM) has recently emerged as a new class of AIE building block that possesses several notable features, such as red to near-infrared (NIR) emission, high brightness, marked photostability, and good biocompatibility. In this minireview, we summarize some recent advances of our established AIE building block of QM, focusing on the AIE mechanism, regulation of emission wavelength and morphology, the facile scale-up and fast preparation for AIE nanoparticles, as well as potential biomedical imaging applications.     

Recent Advances of AIE-Active Conjugated Polymers: Synthesis and Application

Conjugated polymers (CPs) have long been recognized as an important class of materials. The highly conjugated backbone of the CPs will facilitate the rapid exciton migration and result in amplification of fluorescence signals. However, CPs are likely to aggregate and form excimers in solid states, directly leading to the fluorescence quenching, namely aggregation-caused quenching (ACQ), hence inhibiting their prospective utilizations in a large degree. Since the effect of aggregation-induced emission (AIE) is opposite to that of notorious ACQ, the AIE has raised great attention from scientists. CPs with AIE or aggregation-enhanced emission (AEE) features may help to solve the ACQ problem and meanwhile impart polymers with new properties and practical applications. In this review, we summarize the recent progress on the preparation of CPs with AIE or AEE characteristics, where AIE-active luminogens are located at polymer backbones or pendants. Their potential applications including fluorescent sensors, biological probes, and active layers for the fabrication of light-emitting diodes are also described.     

High‐Performance Quinoline‐Malononitrile Core as a Building Block for the Diversity‐Oriented Synthesis of AIEgens

In vivo fluorescent monitoring of physiological processes with high‐fidelity is essential in disease diagnosis and biological research, but faces extreme challenges due to aggregation‐caused quenching (ACQ) and short‐wavelength fluorescence. The development of high‐performance and long‐wavelength aggregation‐induced emission (AIE) fluorophores is in high demand for precise optical bioimaging. The chromophore quinoline‐malononitrile (QM) has recently emerged as a new class of AIE building block that possesses several notable features, such as red to near‐infrared (NIR) emission, high brightness, marked photostability, and good biocompatibility. In this minireview, we summarize some recent advances of our established AIE building block of QM, focusing on the AIE mechanism, regulation of emission wavelength and morphology, the facile scale‐up and fast preparation for AIE nanoparticles, as well as potential biomedical imaging applications.     

聚集诱导发光机理研究

与传统荧光生色团聚集后导致荧光猝灭相反,有一类化合物在单分子状态下荧光微弱甚至观察不到荧光,而在聚集状态下荧光显著增强,这就是聚集诱导发光(AIE)现象。AIE现象独特的优越性使得众多研究组开发出越来越多的新AIE体系,其机理也被广泛而深入地研究。本文总结了目前为止已经提出的AIE机理,包括分子内旋转受限、分子内共平面、抑制光物理过程或光化学反应、非紧密堆积、形成J-聚集体以及形成特殊激基缔合物等;着重评述了目前研究最为全面、适用范围最广的分子内旋转受限机理。同时介绍了一些基于这些机理设计的新AIE体系。     

Principles of Aggregation-Induced Emission: Design of Deactivation Pathways for Advanced AIEgens and Applications

Twenty years ago, the concept of aggregation-induced emission (AIE) was proposed, and this unique luminescent property has attracted scientific interest ever since. However, AIE denominates only the phenomenon, while the details of its underlying guiding principles remain to be elucidated. This minireview discusses the basic principles of AIE based on our previous mechanistic study of the photophysical behavior of 9,10-bis(N,N-dialkylamino)anthracene ( BDAA ) and the corresponding mechanistic analysis by quantum chemical calculations. BDAA comprises an anthracene core and small electron donors, which allows the quantum chemical aspects of AIE to be discussed. The key factor for AIE is the control over the non-radiative decay (deactivation) pathway, which can be visualized by considering the conical intersection (CI) on a potential energy surface. Controlling the conical intersection (CI) on the potential energy surface enables the separate formation of fluorescent (CI:high) and non-fluorescent (CI:low) molecules [control of conical intersection accessibility ( CCIA )]. The novelty and originality of AIE in the field of photochemistry lies in the creation of functionality by design and in the active control over deactivation pathways. Moreover, we provide a new design strategy for AIE luminogens (AIEgens) and discuss selected examples.     

Aggregation‐Induced Emission with Long‐Lived Room‐Temperature Phosphorescence from Methylene‐Linked Organic Donor–Acceptor Structures

Aggregation‐caused quenching (ACQ), where excited‐state and/or ground‐state electronic structures are altered to exhibit an increased proclivity for non‐radiative decay for the aggregates, is largely responsible for the lack of fluorescence and phosphorescence in molecular solids in general. Here we show that ACQ could be effectively circumvented by constructing an aromatic system with a methylene‐linker, where the system exhibits typical aggregation‐induced emission (AIE) with long‐lived room‐temperature phosphorescence, since the tetrahedral structure in the solid state may significantly reduce strong intermolecular interactions contributing to ACQ.     

A Novel L-Shaped Fluorescent Probe for AIE Sensing of Zinc (II) Ion by a DR/NIR Response

In the field of optical sensors, small molecules responsive to metal cations are of current interest. Probes displaying aggregation-induced emission (AIE) can solve the problems due to the aggregation-caused quenching (ACQ) molecules, scarcely emissive as aggregates in aqueous media and in tissues. The addition of a metal cation to an AIE ligand dissolved in solution can cause a “turn-on” of the fluorescence emission. Half-cruciform-shaped molecules can be a winning strategy to build specific AIE probes. Herein, we report the synthesis and characterization of a novel L-shaped fluorophore containing a benzofuran core condensed with 3-hydroxy-2-naphthaldehyde crossed with a nitrobenzene moiety. The novel AIE probe produces a fast colorimetric and fluorescence response toward zinc (II) in both in neutral and basic conditions. Acting as a tridentate ligand, it produces a complex with enhanced and red-shifted emission in the DR/NIR spectral range. The AIE nature of both compounds was examined on the basis of X-ray crystallography and DFT analysis.     

Recent Advances in Aggregation-Induced Emission Active Materials for Sensing of Biologically Important Molecules and Drug Delivery System

The emergence and development of aggregation induced emission (AIE) have attracted worldwide attention due to its unique photophysical phenomenon and for removing the obstacle of aggregation-caused quenching (ACQ) which is the most detrimental process thereby making AIE an important and promising aspect in various fields of fluorescent material, sensing, bioimaging, optoelectronics, drug delivery system, and theranostics. In this review, we have discussed insights and explored recent advances that are being made in AIE active materials and their application in sensing, biological cell imaging, and drug delivery systems, and, furthermore, we explored AIE active fluorescent material as a building block in supramolecular chemistry. Herein, we focus on various AIE active molecules such as tetraphenylethylene, AIE-active polymer, quantum dots, AIE active metal-organic framework and triphenylamine, not only in terms of their synthetic routes but also we outline their applications. Finally, we summarize our view of the construction and application of AIE-active molecules, which thus inspiring young researchers to explore new ideas, innovations, and develop the field of supramolecular chemistry in years to come.     

Bridged Stilbenes: AIEgens Designed via a Simple Strategy to Control the Non-radiative Decay Pathway

To broaden the application of aggregation-induced emission (AIE) luminogens (AIEgens), the design of novel small-molecular dyes that exhibit high fluorescence quantum yield (Φ_fl) in the solid state is required. Considering that the mechanism of AIE can be rationalized based on steric avoidance of non-radiative decay pathways, a series of bridged stilbenes was designed, and their non-radiative decay pathways were investigated theoretically. Bridged stilbenes with short alkyl chains exhibited a strong fluorescence emission in solution and in the solid state, while bridged stilbenes with long alkyl chains exhibited AIE. Based on this theoretical prediction, we developed the bridged stilbenes BPST[7] and DPB[7], which demonstrate excellent AIE behavior.     

Unsymmetrical photochromic bithienylethene-bridge tetraphenylethene molecular switches: Synthesis,aggregation-induced emission and information storage

Aggregation-induced emission(AIE) active photochromic molecules have attracted growing attention for their versatile applications.Here we designed and synthesized five newly unsymmetrical photochromic diarylethene(DAE) dyads(BTE1-5) by connecting tetraphenylethene(TPE) and aromatic substituent via bithienylethene(BTE) bridge.The chemical structures of those compounds were identified by ^1H NMR,¹³C NMR and HRMS.The absorption and emission of these dyads were investigated by UV-vis and fluore scence spectroscopy,respectively.The results showed that all those compounds exhibited typically AIE or aggregation-induced emission enhancement(AIEE) characteristic.Particularly,when an aggregationcaused quenching(ACQ) fluorophore(triphenylamine) was grafted to the molecule,connecting with TPE via BTE-bridge,the ACQ phenomenon was dissipated and converted to an AIE luminophore,and those compounds exhibited photochromism upon irradiation with alternative UV and visible light.The solution or solid of those compounds showed distinctly fluorescence switching "ON" or "OFF" observation upon irradiation with alternative UV and visible light.It is interesting that BTE1 could be applied in recording and rewritable information storage,and the cyclization quantum yields could be affected by substituent significantly.     

Towards meso‐Ester BODIPYs with Aggregation‐Induced Emission Properties: The Effect of Substitution Positions

Three meso‐ester boron dipyrromethene (BODIPY) dyes have been synthesized and functionalized with aggregation‐induced emission (AIE)‐active tetraphenylethene or triphenylethene moieties. It was found that functionalizing at the different positions of the BODIPY core resulted in the final dye having different emission properties in response to aggregation: from aggregation‐induced quenching (ACQ) to being AIE active. X‐ray crystallographic analysis was thus performed to provide an explanation for these differences.     

Polymerized Thermally Activated Delayed-Fluorescence Small Molecules: Long-Axis Polymerization Leads to a Nearly Concentration-Independent Luminescence

Nowadays numerous thermally activated delayed fluorescence (TADF) polymers have been developed for PLEDs to realize high device performance and tunable emission colors. However, they often possess a strong concentration dependence on their luminescence including aggregation-caused quenching (ACQ) and aggregation-induced emission (AIE). Herein, we first report a nearly concentration-independent TADF polymer based on the strategy of polymerized TADF small molecules. It is found that when a donor-acceptor-donor (D-A-D) type TADF small molecule is polymerized through its long-axis direction, the triplet state is distributed along the polymeric backbone to effectively suppress the unwanted concentration quenching. Unlike the short-axis one with an ACQ effect, the photoluminescent quantum yield (PLQY) of the resultant long-axis polymer remains almost unchanged with the increasing doping concentration. Accordingly, a promising external quantum efficiency (EQE) up to 20 % is successfully achieved in a whole doping control window of 5–100 wt. %.     

聚集诱导发光分子的光电功能与器件应用

光电功能分子通常以薄膜和聚集体的形式显示功能, 聚集诱导发光（AIE）分子体系的发现为解决固态下聚集诱导荧光猝灭（ACQ）难题提供了新的思路. 本文总结了近年来本课题组发展的一系列AIE 分子, 侧重介绍这些AIE 分子的光电功能与器件应用, 特别是在有机电致发光器件和有机激光方面的应用. AIE 材料显示非常高的电致发光效率, 在显示与白光器件方面潜力巨大. 在发展电泵有机激光方面, AIE 材料特点突出, 是最有前景的一类材料.     

Aggregation-induced emission luminogens and tunable multicolor polymer networks modulated by dynamic covalent chemistry

Aggregation-induced emission(AIE) based luminescent materials are generating intensive interest due to their unique fluorescence in the aggregation state. Herein we report a strategy of dynamic covalent chemistry(DCC) controlled AIE luminogens for the regulation of multicolor emission in reversible covalent polymer networks. Tetraphenylethene derived ring-chain tautomers were prepared, and the emission was readily controlled through multimode, such as changing the solvent, adding the base, and d...     

喹喔啉酮类JNK3抗肿瘤抑制剂的绿色合成——推荐一个综合化学实验

介绍了一个荧光光谱方面新的实验项目:以苝和六苯基噻咯作为发光物质的特征分子,通过测定其不同聚集状态下的荧光光谱,观察聚集荧光淬灭ACQ(aggregation-causedquenching)和聚集诱导发光AIE(aggregationinduced emission)两种不同的发光现象;利用晶体学数据库CCDC (Cambridge Crystallographic Data Centre)检索特征分子的晶体结构,从分子晶体结构层面分析AIE和ACQ发光现象产生的原因,在此基础上探讨不同发光机制和分子状态的关系。论文详细描述了实验的设计思想、实验内容和实验结论,并结合教学过程,分析了该实验在开阔学生视野、提高认知水平及培养科研素养等方面所取得的教学效果。     

Self‐Assembly of Aggregation‐Induced‐Emission Molecules

The last decade has witnessed rapid developments in aggregation‐induced emission (AIE). In contrast to traditional aggregation, which causes luminescence quenching (ACQ), AIE is a reverse phenomenon that allows robust luminescence to be retained in aggregated and solid states. This makes it possible to fabricate various highly efficient luminescent materials, which opens new paradigms in a number of fields, such as imaging, sensing, medical therapy, light harvesting, light‐emitting devices, and organic electronic devices. Of the various important features of AIE molecules, their self‐assembly behavior is very attractive because the formation of a well‐defined emissive nanostructure may lead to advanced applications in diverse fields. However, due to the nonplanar topology of AIEgens, it is not easy for them to self‐assemble into well‐defined structures. To date, some strategies have been proposed to achieve the self‐assembly of AIEgens. Herein, we summarize the most recent approaches for the self‐assembly of AIE molecules. These approaches can be sorted into two classes: 1) covalent molecular design and 2) noncovalent supramolecular interactions. We hope this will inspire more excellent work in the field of AIE.     

Origin of the Aggregation-Induced Phosphorescence of Platinum(II) Complexes: The Role of Metal–Metal Interactions on Emission Decay in the Crystalline State

Discerning the origins of the phosphorescent aggregation-induced emission (AIE) from Pt(II) complexes is crucial for developing the broader range of photo-functional materials. Over the past few decades, several mechanisms of phosphorescent AIE have been proposed, however, not have been directly elucidated. Herein, we describe phosphorescence and deactivation processes of four class of AIE active Pt(II) complexes in the crystalline state based on experimental and theoretical investigation. These complexes show metal-to-ligand and/or metal−metal-to-ligand charge transfer emission in crystalline state with different heat resistance against thermal emission quenching. The calculated energy profiles including the minimum energy crossing point between S₀ and T₁ states were consistent with the heat resistant properties, which provided the mechanism for AIE expression. Furthermore, we have clarified the role of metal-metal interaction in AIE by comparing two computational models.     

AIE Polymers: Synthesis,Properties, and Biological Applications

Aggregation‐caused quenching (ACQ) is a general phenomenon that is faced by traditional fluorescent polymers. Aggregation‐induced emission (AIE) is exactly opposite to ACQ. AIE molecules are almost nonemissive in their molecularly dissolved state, but they can be induced to show high fluorescence in the aggregated or solid state. Incorporation of AIE phenomenon into polymer design has yielded various polymers with AIE characteristics. In this review, the recent progress of AIE polymers for biological applications is summarized.

     

Visualizing phase transition of upper critical solution temperature (UCST) polymers with AIE

The stimuli-responsive polymers with upper critical solution temperatures(UCST) are highly attractive for drug delivery applications. However, the phase transition process of UCST polymer is usually characterized by turbidity measurement and electron microscopy, which are significantly restricted by low sensitivity and static observation. In contrary, the fluorescence technique has significant advantages in terms of high sensitivity, easy operation, and dynamic observation. However, the conventional fluorophores suffer from the drawbacks of aggregation-caused quenching(ACQ) after being encapsulated by UCST polymers, which are not suitable for direct visualization of the phase transition process. To tackle this challenge, we herein developed a series of UCST polymers based on polyacrylamides decorated with bile acid and aggregation-induced emission(AIE)-active tetraphenylethene(TPE) groups, which can be used for direct fluorescence monitoring of the phase transition process. Moreover, the AIE-active UCST polymers can serve as drug carriers, which can not only monitor the drug release process under thermal stimuli, but also verify the drug release by fluorescence recovery after thermal stimuli. It is expected that the AIE-active UCST polymers with self-monitoring ability are promising for biomedical applications.