A review on electrode and electrolyte for lithium ion batteries under low temperature

Under low temperature (LT) conditions (−80 °C∼0 °C), lithium-ion batteries (LIBs) may experience the formation of an extensive solid electrolyte interface (SEI), which can cause a series of detrimental effects such as Li⁺ deposition and irregular dendritic filament growth on the electrolyte surface. These issues ultimately lead to the degradation of the LT performance of LIBs. As a result, new electrode/electrolyte materials are necessary to address these challenges and enable the proper functioning of LIBs at LT. Given that most electrochemical reactions in lithium-ion batteries occur at the electrode/electrolyte interface, finding solutions to mitigate the negative impact caused by SEI is crucial to improve the LT performance of LIBs. In this article, we analyze and summarize the recent studies on electrode and electrolyte materials for low temperature lithium-ion batteries (LIBs). These materials include both metallic materials like tin, manganese, and cobalt, as well as non-metallic materials such as graphite and graphene. Modified materials, such as those with nano or alloying characteristics, generally exhibit better properties than raw materials. For instance, Sn nanowire-Si nanoparticles (SiNPs−In-SnNWs) and tin dioxide carbon nanotubes (SnO₂@CNT) have faster Li⁺ transport rates and higher reversible capacity at LT. However, it′s important to note that when operating under LT, the electrolyte may solidify, leading to difficulty in Li⁺ transmission. The compatibility between the electrolyte and electrode can affect the formation of the solid electrolyte interphase (SEI) and the stability of the electrode/electrolyte system. Therefore, a good electrode/electrolyte system is crucial for successful operation of LIBs at LT.     

Electrolyte Design for Improving Mechanical Stability of Solid Electrolyte Interphase in Lithium–Sulfur Batteries

Practical lithium–sulfur (Li−S) batteries are severely plagued by the instability of solid electrolyte interphase (SEI) formed in routine ether electrolytes. Herein, an electrolyte with 1,3,5-trioxane (TO) and 1,2-dimethoxyethane (DME) as co-solvents is proposed to construct a high-mechanical-stability SEI by enriching organic components in Li−S batteries. The high-mechanical-stability SEI works compatibly in Li−S batteries. TO with high polymerization capability can preferentially decompose and form organic-rich SEI, strengthening mechanical stability of SEI, which mitigates crack and regeneration of SEI and reduces the consumption rate of active Li, Li polysulfides, and electrolytes. Meanwhile, DME ensures high specific capacity of S cathodes. Accordingly, the lifespan of Li−S batteries increases from 75 cycles in routine ether electrolyte to 216 cycles in TO-based electrolyte. Furthermore, a 417 Wh kg⁻¹ Li−S pouch cell undergoes 20 cycles. This work provides an emerging electrolyte design for practical Li−S batteries.     

The voltammetric behaviour of solid 2,2-diphenyl-1-picrylhydrazyl (DPPH) microparticles

The electrochemical behaviour of 2,2-diphenyl-1-picrylhydrazyl (DPPH) microparticles, attached to a graphite electrode and adjacent to an aqueous electrolyte solution, has been studied by cyclic voltammetry. DPPH exhibits one reversible redox couple with a formal potential of 0.340 V versus Ag|AgCl (pH=7.0). At more positive potentials, a redox couple appears with a formal potential E_f=0.733 V versus Ag|AgCl. The oxidation at this potential is followed by an irreversible chemical reaction generating a product which gives a redox couple with a formal potential at 0.177 V versus Ag|AgCl. The reduction process of this couple is followed by a slow chemical reaction in the course of which DPPH is reformed.     

五种1-烷基-2,3-二甲基咪唑型离子液体的合成及作为Li/LiFeO_4电池电解液的研究

合成了五种新的1-烷基-2,3-二甲基咪唑二(三氟甲基磺酰)亚胺离子液体(alkyl-DMimTFSI).以离子液体作为Li/LiFeO4电池电解液,分别考察不同烷基(正丁基、正戊基、正辛基、异辛基和正癸基)对电解液理化性质、界面性质和电池行为的影响.结果表明离子液体的电化学窗口都可以达到5.6V(-0.4～5.2Vvs.Li+/Li),显示它们具有较好的电化学稳定性.加入碳酸亚乙烯酯作为添加剂后,离子液体电解液在Li负极形成稳定的固体电解质相界面膜(SEI),从而提高了Li负极的稳定性,保护了Li片不受腐蚀.电化学阻抗和循环伏安分析进一步揭示LiFeO4正极与离子液体电解液也有良好的兼容性.此外,研究还表明离子液体中烷基种类严重影响它们的电池行为.采用butyl-DMimTFSI和amyl-DMimTFSI电解液体系的电池充放电容量和可逆性明显优于另外三种离子液体,它们的首次放电容量分别达到145和152.6mAh/g,并表现出良好的充放电循环性能.因粘度最大,采用isooctyl-DMimTFSI电解液的电池首次放电容量仅为8.3mAh/g,但添加碳酸丙烯酯(质量比1∶1)稀释后首次放电容量上升至132.4mAh/g.     

Non-Flammable Electrolyte Enables High-Voltage and Wide-Temperature Lithium-Ion Batteries with Fast Charging

Electrolyte design has become ever more important to enhance the performance of lithium-ion batteries (LIBs). However, the flammability issue and high reactivity of the conventional electrolytes remain a major problem, especially when the LIBs are operated at high voltage and extreme temperatures. Herein, we design a novel non-flammable fluorinated ester electrolyte that enables high cycling stability in wide-temperature variations (e.g., −50 °C–60 °C) and superior power capability (fast charge rates up to 5.0 C) for the graphite||LiNi_0.8Co_0.1Mn_0.1O₂ (NCM811) battery at high voltage (i.e., >4.3 V vs. Li/Li⁺). Moreover, this work sheds new light on the dynamic evolution and interaction among the Li⁺, solvent, and anion at the molecular level. By elucidating the fundamental relationship between the Li⁺ solvation structure and electrochemical performance, we can facilitate the development of high-safety and high-energy-density batteries operating in harsh conditions.     

Effects of current densities on the formation of LiCoO<Subscript>2</Subscript>/graphite lithium ion battery

The activation characteristics and the effects of current densities on the formation of a separate LiCoO₂ and graphite electrode were investigated and the behavior also was compared with that of the full LiCoO₂/graphite batteries using various electrochemical techniques. The results showed that the formation current densities obviously influenced the electrochemical impedance spectrum of Li/graphite, LiCoO₂/Li, and LiCoO₂/graphite cells. The electrolyte was reduced on the surface of graphite anode between 2.5 and 3.6 V to form a preliminary solid electrolyte interphase (SEI) film of anode during the formation of the LiCoO₂/graphite batteries. The electrolyte was oxidized from 3.95 V vs Li⁺/Li on the surface of LiCoO₂ to form a SEI film of cathode. A highly conducting SEI film could be formed gradually on the surface of graphite anode, whereas the SEI film of LiCoO₂ cathode had high resistance. The LiCoO₂ cathode could be activated completely at the first cycle, while the activation of the graphite anode needed several cycles. The columbic efficiency of the first cycle increased, but that of the second decreased with the increase in the formation current of LiCoO₂/graphite batteries. The formation current influenced the cycling performance of batteries, especially the high-temperature cycling performance. Therefore, the batteries should be activated with proper current densities to ensure an excellent formation of SEI film on the anode surface.     

Ionic Liquid Electrolyte with Weak Solvating Molecule Regulation for Stable Li Deposition in High-Performance Li−O2 Batteries

Li−O₂ batteries with bis(trifluoromethanesulfonyl)imide-based ionic liquid (TFSI-IL) electrolyte are promising because TFSI-IL can stabilize O₂⁻ to lower charge overpotential. However, slow Li⁺ transport in TFSI-IL electrolyte causes inferior Li deposition. Here we optimize weak solvating molecule (anisole) to generate anisole-doped ionic aggregate in TFSI-IL electrolyte. Such unique solvation environment can realize not only high Li⁺ transport parameters but also anion-derived solid electrolyte interface (SEI). Thus, fast Li⁺ transport is achieved in electrolyte bulk and SEI simultaneously, leading to robust Li deposition with high rate capability (3 mA cm⁻²) and long cycle life (2000 h at 0.2 mA cm⁻²). Moreover, Li−O₂ batteries show good cycling stability (a small overpotential increase of 0.16 V after 120 cycles) and high rate capability (1 A g⁻¹). This work provides an effective electrolyte design principle to realize stable Li deposition and high-performance Li−O₂ batteries.     

Effect of Anionic Electrolytes and Precursor Concentrations on the Electrodeposited Pt Structures

Electrodeposition of functional metal surfaces has received great attention because of their useful applications. Recently, interesting electrodeposition behavior of Pt at −0.8 V (vs. Ag/AgCl) was reported, where underpotential deposited H (H_upd) layers played a unique role in the electrodeposition. Here, we report the effect of anionic electrolytes and precursor concentrations on the electrochemical deposition behavior of Pt. Depending on these two experimental parameters, two distinct Pt structures, monolayer Pt films and Pt spheres, were electrodeposited at −0.8 V. In addition to the underpotential deposited H (H_upd) layers formed at −0.8 V, the adsorption of Cl⁻ also plays a significant role in determining the electrodeposited Pt structures. When the PtCl₄²⁻ concentration was low and the Cl⁻ concentration was high enough for the adsorption of PtCl₄²⁻ to be blocked by the H_upd and Cl⁻ layers, monolayer Pt films were electrodeposited. Otherwise, further electrodeposition of Pt spheres over the monolayer Pt films occurred. The effect of other halide ion adsorption and the controlled growth of Pt spheres during the Pt electrodeposition were also investigated. The electrochemical deposition behavior of Pt demonstrated in this work provides insight into the fabrication of functional Pt surfaces.     

Competitive Salt Precipitation/Dissolution During Free‐Water Reduction in Water‐in‐Salt Electrolyte

Water‐in‐salt electrolytes based on highly concentrated bis(trifluoromethyl)sulfonimide (TFSI) promise aqueous electrolytes with stabilities nearing 3 V. However, especially with an electrode approaching the cathodic (reductive) stability, cycling stability is insufficient. While stability critically relies on a solid electrolyte interphase (SEI), the mechanism behind the cathodic stability limit remains unclear. Now, two distinct reduction potentials are revealed for the chemical environments of free and bound water and that both contribute to SEI formation. Free water is reduced about 1 V above bound water in a hydrogen evolution reaction (HER) and is responsible for SEI formation via reactive intermediates of the HER; concurrent LiTFSI precipitation/dissolution establishes a dynamic interface. The free‐water population emerges, therefore, as the handle to extend the cathodic limit of aqueous electrolytes and the battery cycling stability.     

Competitive Salt Precipitation/Dissolution During Free-Water Reduction in Water-in-Salt Electrolyte

Water-in-salt electrolytes based on highly concentrated bis(trifluoromethyl)sulfonimide (TFSI) promise aqueous electrolytes with stabilities nearing 3 V. However, especially with an electrode approaching the cathodic (reductive) stability, cycling stability is insufficient. While stability critically relies on a solid electrolyte interphase (SEI), the mechanism behind the cathodic stability limit remains unclear. Now, two distinct reduction potentials are revealed for the chemical environments of free and bound water and that both contribute to SEI formation. Free water is reduced about 1 V above bound water in a hydrogen evolution reaction (HER) and is responsible for SEI formation via reactive intermediates of the HER; concurrent LiTFSI precipitation/dissolution establishes a dynamic interface. The free-water population emerges, therefore, as the handle to extend the cathodic limit of aqueous electrolytes and the battery cycling stability.     

原子力显微镜在锂离子电池界面研究中的应用

近几年,电动汽车市场的飞速发展对锂离子电池的能量密度和安全性提出了更高的要求. 然而,过去近30年,在应用终端市场的大力推动下,锂离子电池的电极材料、电池结构设计和生产工艺都已经发展得比较成熟,容量提升空间已经比较小,想要进一步提高现有锂离子电池的能量密度,需要对锂离子电池的整个系统和工作原理有更深刻和全面的理解. 存在于锂离子电池电极材料和电解液之间的固态电解质中间相（solid electrolyte interphase,SEI）已被证明是一个影响电池性能的重要因素,目前学术界和产业界对其认识还不是很全面,尤其是高分辨、工况下以及多技术联合的界面表征工作较少见到报道. 原子力显微镜（atomic force microscopy,AFM）通过探测针尖与样品之间的相互作用力,能够在原子尺度上原位表征液态电池界面的形貌以及力学特性,对于电极界面的理解和调控非常重要. 本文作者通过总结近几年AFM在锂离子电池SEI研究的中的应用,并结合本课题组在该领域的工作,对AFM技术在锂离子电池SEI研究中的应用做了总结和展望,对加深锂离子电池界面的理解,以及构建稳定锂电池界面的相关研究有参考意义.     

Formation of lithiated gold and its use for the preparation of reference electrodes — an EQCM study

Lithiated gold wires can be used to build reference electrodes with outstanding potential stabilities over several days and even over the course of one year. These electrodes are well suited for investigations in the context of lithium-ion batteries (LIBs). In this work, a detailed procedure for the preparation of such electrodes with tailored mechanical properties, which can be fitted gastight into electrochemical cells using commercially available fittings, is given. The electrochemical lithiation process is studied using the electrochemical quartz crystal microbalance (EQCM) technique, and the differences in lithiation of wire type and thin film type gold electrodes are discussed. All experiments were carried out with two different electrolytes, namely, a LiPF₆ and a lithium bis(trifluoromethane sulfonyl) imide (LiTFSI)-based electrolyte, and we conclude that for a higher lithiation rate and long-term stability, the use of LiTFSI-based electrolyte in the preparation phase is beneficial. The EQCM data provides a better insight in the analysis of film formation processes, like the buildup of the solid electrolyte interphase (SEI) during the lithiation, the rate of deposition of metallic lithium, or additional information on the kinetics of Li-Au alloy formation.

     

Significant Strain Dissipation via Stiff-Tough Solid Electrolyte Interphase Design for Highly Stable Alloying Anodes

The pulverization of alloying anodes significantly restricts their use in lithium-ion batteries (LIBs). This study presents a dual-phase solid electrolyte interphase (SEI) design that incorporates finely dispersed Al nanoparticles within the LiPON matrix. This distinctive dual-phase structure imparts high stiffness and toughness to the integrated SEI film. In comparison to single-phase LiPON film, the optimized Al/LiPON dual-phase SEI film demonstrates a remarkable increase in fracture toughness by 317.8 %, while maintaining stiffness, achieved through the substantial dissipation of strain energy. Application of the dual-phase SEI film on an Al anode leads to a 450 % enhancement in cycling stability for lithium storage in dual-ion batteries. A similar enhancement in cycling stability for silicon anodes, which face severe volume expansion issues, is also observed, demonstrating the broad applicability of the dual-phase SEI design. Specifically, homogeneous Li−Al alloying has been observed in conventional LIBs, even when paired with a high mass loading LiNi_0.5Co_0.3Mn_0.2O₂ cathode (7 mg cm⁻²). The dual-phase SEI film design can also accelerate the diffusion kinetics of Li-ions through interface electronic structure regulation. This dual-phase design can integrate stiffness and toughness into a single SEI film, providing a pathway to enhance both the structural stability and rate capability of alloying anodes.     

Simultaneous Stabilization of Potassium Metal and Superoxide in K–O2 Batteries on the Basis of Electrolyte Reactivity

In superoxide batteries based on O₂/O₂^? redox chemistry, identifying an electrolyte to stabilize both the alkali metal and its superoxide remains challenging owing to their reactivity towards the electrolyte components. Bis(fluorosulfonyl)imide (FSI^?) has been recognized as a “magic anion” for passivating alkali metals. The KFSI–dimethoxyethane electrolyte passivates the potassium metal anode by cleavage of S?F bonds and the formation of a KF‐rich solid–electrolyte interphase (SEI). However, the KFSI salt is chemically unstable owing to nucleophilic attack by superoxide and/or hydroxide species. On the other hand, potassium bis(trifluorosulfonyl)imide (KTFSI) is stable to KO₂, but results in mossy potassium deposits and irreversible plating and stripping. To circumvent this dilemma, we developed an artificial SEI for the metal anode and thus long‐cycle‐life K–O₂ batteries. This study will guide the development of stable electrolytes and artificial SEIs for metal–O₂ batteries.     

电解液添加剂硫酸亚乙酯对锂离子电池性能的影响

在1 mol/L LiPF₆/碳酸乙烯酯+碳酸二甲酯+碳酸甲乙酯（体积比1∶1∶1）电解液中,采用恒流充放电测试、循环伏安法（CV）、扫描电子显微镜（SEM）、能量散射光谱（EDS）、电化学阻抗谱（EIS）等测试技术,研究了添加剂硫酸亚乙酯（DTD）对锂离子电池性能及石墨化中间相碳微球（MCMB）电极/电解液界面性质的影响。 结果表明,在电解液中引入体积分数0.01%DTD后,MCMB/Li电池可逆放电容量从300 mA·h/g提高至350 mA·h/g,电池总阻抗降低,循环稳定性提高。CV测试发现,在首次还原过程中,DTD在电极电位1.4 V左右（vs Li/Li⁺）发生电化学还原,参与了MCMB电极表面固体电解质相界面膜（SEI膜）的形成过程。 同时,DTD对LiMn₂O₄电极性能无不良影响。     

Dynamics of Electrochemical Noise of the Lithium Electrode in Aprotic Organic Electrolytes

Processes that occur on the lithium electrode under open-circuit conditions and when polarized cathodically and anodically are studied by means of the electrochemical-noise method. The study is carried out in such aprotic organic electrolytes as 1 M solution of LiClO₄ in 1,3-dioxolane; 1 M solution of LiPF₆ in a mixture of ethylene carbonate and diethyl carbonate; and 1 M solution of LiN(CF₃SO₂)₂ in 1,3-dioxolane. An analysis of the noise characteristics of the polarized electrode confirms that the electrochemical process is localized under the passivating film. Potential fluctuations of the electrode polarized at high current densities depend on the electrolyte nature. The amplitude of the electrochemical noise is maximum in the electrolyte system 1 M LiPF₆ in a mixture of ethylene carbonate and diethyl carbonate. The fluctuation intensity is found to correlate with the electrode stability when cycled. This fact suggests that the method can be used for express assessment of organic electrolytes intended for lithium batteries.     

A Designed Durable Electrolyte for High-Voltage Lithium-Ion Batteries and Mechanism Analysis

Rechargeable lithium-ion batteries (LIBs) dominate the energy market, from electronic devices to electric vehicles, but pursuing greater energy density remains challenging owing to the limited electrode capacity. Although increasing the cut-off voltage of LIBs (>4.4 V vs. Li/Li⁺) can enhance the energy density, the aggravated electrolyte decomposition always leads to a severe capacity fading and/or expiry of the battery. Herein, a new durable electrolyte is reported for high-voltage LIBs. The designed electrolyte is composed of mixed linear alkyl carbonate solvent with certain cyclic carbonate additives, in which use of the ethylene carbonate (EC) co-solvent was successfully avoided to suppress the electrolyte decomposition. As a result, an extremely high cycling stability, rate capability, and high-temperature storage performance were demonstrated in the case of a graphite|LiNi_0.6Co_0.2Mn_0.2O₂ (NCM622) battery at 4.45 V when this electrolyte was used. The good compatibility of the electrolyte with the graphite anode and the mitigated structural degradation of the NCM622 cathode are responsible for the high performance at high potentials above 4.4 V. This work presents a promising application of high-voltage electrolytes for pursuing high energy LIBs and provides a straightforward guide to study the electrodes/electrolyte interface for higher stability.     

A Shuttle-Free Solid-State Cu−Li Battery Based on a Sandwich-Structured Electrolyte

Cu−Li batteries leveraging the two-electron redox property of Cu can offer high energy density and low cost. However, Cu−Li batteries are plagued by limited solubility and a shuttle effect of Cu ions in traditional electrolytes, which leads to low energy density and poor cycling stability. In this work, we rationally design a solid-state sandwich electrolyte for solid-state Cu−Li batteries, in which a deep-eutectic-solvent gel with high Cu-ion solubility is devised as a Cu-ion reservoir while a ceramic Li_1.4Al_0.4Ti_1.6(PO₄)₃ interlayer is used to block Cu-ion crossover. Because of the high ionic conductivity (0.55 mS cm⁻¹ at 25 °C), wide electrochemical window (>4.5 V vs. Li⁺/Li), and high Cu ion solubility of solid-state sandwich electrolyte, a solid-state Cu−Li battery demonstrates a high energy density of 1 485 Wh kg_Cu⁻¹and long-term cyclability with 97 % capacity retention over 120 cycles. The present study lays the groundwork for future research into low-cost solid-state Cu−Li batteries.     

Direct electrochemical response of Myoglobin using a room temperature ionic liquid, 1-(2-hydroxyethyl)-3-methyl imidazolium tetrafluoroborate,as supporting electrolyte

Direct electrochemical response of Myoglobin (Myb) at the basal plane graphite (BPG) electrode was observed when a room temperature ionic liquid (RTIL), 1-(2-hydroxyethyl)-3-methyl imidazolium tetrafluoroborate ([HEMIm][BF₄]), was used as the supporting electrolyte. In a 0.17 M [HEMIm]BF₄ aqueous solution, a couple of well-defined redox peaks of Myb could be obtained, whose anodic and cathodic peak potentials were at −0.158 and −0.224 V (vs. Ag/AgCl), respectively. Both anodic and cathodic peak currents increased linearly with the potential scan rate. Compared with the supporting electrolyte of phosphate buffer, [HEMIm][BF₄] played an obvious promotion for the direct electron transfer between Myb and the BPG electrode. Further investigation suggested that Myb was adsorbed tightly on the surface of the BPG electrode in the presence of [HEMIm][BF₄] to form a stable, approximate monolayer Myb film. Myb adsorbed on the BPG electrode surface showed a remarkable electrocatalytic activity for the reduction of oxygen in a [HEMIm][BF₄] aqueous solution. Based on these, a third-generation biosensor could be constructed to directly detect the concentration of oxygen in aqueous solution with a limit of detection of 2.3 × 10⁻⁸ M.     

Electrochemical reduction of CO2 with clathrate hydrate electrolytes and copper foam electrodes

We report on the first use of clathrate hydrates as electrolyte additive in the electrochemical reduction of carbon dioxide. Clathrate hydrates allow the enrichment of significantly larger volumes of gas than liquids can usually dissolve. Electrolyte solutions containing 10%_mass THF with and without CO₂ containing clathrate hydrates were investigated with a copper-foam working electrode. Our results show that at − 1.0 V vs Ag/AgCl the Faradaic efficiency for the production of CO and further reduced carbonaceous products was 80% with clathrates vs 20% with non-clathrate electrolytes of identical chemical composition at nearly equal temperature.