Spectroscopic Properties of Er3+/Yb3+-codoped PbO–Bi2O3–Ga2O3–GeO2 Glasses

We investigate the spectroscopic properties of the 1.5-μm emission from the ⁴I_13/2 → ⁴I_15/2 transition of Er³⁺ ions in PbO–Bi₂O₃–Ga₂O₃–GeO₂ glasses for applications in broadband fiber amplifiers. The measured emission peak locates at 1,532 nm with a full width at half-maximum of ∼45 nm. The glasses exhibit a large stimulated emission cross-section of 0.89 × 10⁻²⁰ cm² and a large product of 40.0. Infrared-to-green upconversion occurs simultaneously upon excitation of the 1.5-μm emission with a commercially available 980 nm laser diode. The green-upconversion intensity has a quadratic dependence on incident pump laser power, indicating a two-photon process. Energy transfer processes and nonradiative phonon-assisted decays could account for the population of the ²H_11/2 of Er³⁺. The results indicate the possibility towards the development of lead–bismuth–gallate–germanate based glasses as photonics devices.     

Specific Features of the Local Structure and Transport Properties of ZrO2–Sc2O3–Y2O3 and ZrO2–Sc2O3–Yb2O3 Crystals

Optics and Spectroscopy - The specific features of the local structure of ZrO2–Sc2O3–Y2O3 and ZrO2–Sc2O3–Yb2O3 crystals are revealed by optical spectroscopy using the Eu3+...     

Subsolidus phase relation in the Bi_2O_3–Fe_2O_3–La_2O_3 system

Bismuth-containing semiconductor material is a hot topic in photocatalysts because of its effective absorption under the visible light.In this paper,we expect to explore a new bismuth-based photocatalyst by studying the subsolidus phase relations of the Bi2O3–Fe2O3–La2O3system.The X-ray diffraction data shows that in this ternary system the ternary compound does not exist,while seven binary compounds(including one solid solution series Bi1 xLaxO1.5with 0.167≤x≤0.339)are obtained and eight compatibility triangles are determined.     

Electrical transport characteristics of ZnO–Bi2O3–B2O3 glasses

Optically clear glasses in the ZnO–Bi₂O₃–B₂O₃ (ZBBO) system were fabricated via the conventional melt-quenching technique. Dielectric constant and loss measurements carried out on ZBBO glasses unraveled nearly frequency (1 kHz–10 MHz)-independent dielectric characteristics associated with significantly low loss (D?=?0.004). However, weak temperature response was found with temperature coefficient of dielectric constant 18?±?4 ppm °C^?1 in the 35–250 °C temperature range. The conduction and relaxation phenomena were rationalized using universal AC conductivity power law and modulus formalism respectively. The activation energy for relaxation determined using imaginary parts of modulus peaks was 2.54 eV which was close to that of the DC conduction implying the involvement of similar energy barriers in both the processes. Stretched and power exponents were temperature dependent. The relaxation and conduction in these glasses were attributed to the hoping and migration of Bi³⁺ cations in their own and different local environment.     

Influence of different Fe2O3 content on crystallization of MgO–Al2O3–SiO2–TiO2 system glass-ceramics

The crystallization behaviors of MgO–Al₂O₃–SiO₂–TiO₂ system glasses doping with different content Fe₂O₃ were investigated by means of differential thermal analysis and X-ray diffraction. The kinetic parameter of activation energy for crystallization (E) was obtained by the Owaza Johnson–Mehl–Avrami method. The results show that during the heat treatment, the intermediate phase of µ-cordierite initially precipitated from the glass matrix, and with the increasing temperature, it transformed to α-cordierite. The more the Fe₂O₃ content, the lower the crystallization peak temperature (T _p).But the lowering of T _p value did not mean that the value of E decreases correspondingly. The experimental results suggest that only with appropriate content (about 4.2 wt%), Fe₂O₃ can promote the crystallization of this glass effectively.     

Stability of Thin-Film Cu–As2S3 and Ag–As2S3 Structures

Technical Physics - Thin-film Cu–As2S3 and Ag–As2S3 structures obtained by successively evaporating Cu(Ag) and As2S3 in vacuum on glass substrates have been studied. Samples of these...     

Ultrasonic and FT-IR studies on Bi2O3–Er2O3–PbO glasses

Glasses in the 90Bi₂O₃–(10?x)Er₂O₃?xPbO (x = 3, 5, 7, 9 and 10 mol%) system have been prepared by the melt-quenching technique. Elastic properties and FT-IR spectroscopic studies have been employed to study the role of PbO in the structure of the investigated system. Elastic properties and Debye temperature were recorded using sound wave velocity measurements at 4 MHz at room temperature. The results showed that density increased and molar volume decreased, while both sound velocities increased with an increase in x. Infrared spectra of the glasses revealed that the bismuthate network is affected by an increase in PbO content. The results are interpreted in terms of the conversion of [BiO₆] into [BiO₃] structural units, indicating that Pb ions have been substituted for erbium ions as tetrahedral network formers. The elastic moduli increased with increasing PbO content due to the increased average bond strength and degree of connectivity, as a direct effect of the increase in [BiO₃] structural units.     

Broadband ∼2μm emission in Tm3+/Ho3+ co-doped TeO2–WO3–La2O3 glass

In this work, we report the infrared emission properties of Tm³⁺/Ho³⁺ co-doped TeO₂–WO₃–La₂O₃ (TWL) glass under 808 nm laser excitation. A broad and flat emission from 1600 to 2200 nm corresponding to the Tm³⁺ (³F₄→³H₆) and Ho³⁺ (⁵I₇→⁵I₈) emissions is observed. The full width at half maximum (FWHM) of this broadband increases up to a value of ～370 nm with an optimal [Tm³⁺]/[Ho³⁺] concentration ratio. The energy transfer processes of Tm³⁺?Ho³⁺ are analyzed and the results show that energy transfer between Tm³⁺ and Ho³⁺ plays an important role in the luminescence mechanism. The OH^? influence on the broadband emission is also discussed. These results indicate that Tm³⁺–Ho³⁺ co-doped TWL glass could be a promising material for widely tunable laser or broadband amplifier applications.     

Crystallization and conductivity of 2CaO–La2O3–5P2O5 glass–ceramic with Al2O3 addition

Al₂O₃ was added to a 2CaO–La₂O₃–5P₂O₅ metaphosphate, to replace 10% of the Ca²⁺ ions by Al³⁺, forming a phosphate with the nominal composition 1.8CaO–0.1Al₂O₃–La₂O₃–5P₂O₅. The effect of Al₂O₃ addition and heat treatment on the microstructure and conductivity of the resulting glass–ceramics was investigated by XRD, SEM, TEM, and AC impedance spectroscopy. Upon transformation from glass to glass–ceramic, conductivities increased significantly. The glasses were isochronally transformed at 700 and at 800 °C for 1 h or 5 h, in air, following heating at 3 or 10 °C/min. With Al₂O₃ addition, after a heat treatment at 700 °C, 100–300 nm nano-domains of LaP₃O₉ crystallized from the glass matrix. Annealing at 800 °C produced a further order of magnitude conductivity increase for the Al-free glass, but less so for the Al-containing glass.     

Transport numbers in the molten system NaF–KF–AlF3–Al2O3

Transport numbers in the molten system NaF–KF–AlF₃ (Al₂O₃, CaF₂) were investigated by the Hittorf method. It was confirmed that in molten cryolite, Na₃AlF₆, 1,010 °C, the current is transported almost exclusively by the Na⁺ cations (t(Na⁺)?=?0.99). When AlF₃ was added to a Na₃AlF₆ melt, the transport number of sodium cations decreased to 0.74 at the composition corresponding to NaAlF₄. In molten K₃AlF₆, the transport number of K⁺ cations equals 0.836 at 1,005 °C. In melts containing both Na⁺ and K⁺, the cations contribute to the charge transport approximately in the ratio of the squares of their ionic radii. When 5 mass % of CaF₂ was added to the molten NaF–KF–AlF₃ system, it remarkably influenced the transport numbers of potassium and fluoride anions.     

Upconversion Properties of Er3+/Yb3+ Co-doped TeO2–TiO2–K2O Glasses

The Er³⁺/Yb³⁺ co-doped TeO₂–TiO₂–K₂O glasses were prepared by conventional melting procedures, and their upconversion spectra were performed. The dependence of luminescence intensity on the ratio of Yb³⁺/Er³⁺ was studied, and the relationship between green upconversion luminescence intensity and Er³⁺ concentration is discussed in detail. The 546 nm green upconversion luminescence intensity is optimised in the studied glasses either when the Yb³⁺/Er³⁺ ratio is 25/1 and Er³⁺ concentration is 0.1 mol%, or when the Yb³⁺/Er³⁺ ratio is 10/1 and Er³⁺ concentration is 0.15 mol%. These glasses could be one of the potential candidates for LD pumping microchip solid-state lasers.     

Rotational Spectra of CH3CCH–NH3, NCCCH–NH3, and NCCCH–OH2

Microwave spectra of NCCCH–NH₃, CH₃CCH–NH₃, and NCCCH–OH₂have been recorded using a pulsed-nozzle Fourier-transform microwave spectrometer. The complexes NCCCH–NH₃and CH₃CCH–NH₃are found to have symmetric-top structures with the acetylenic proton hydrogen bonded to the nitrogen of the NH₃. The data for CH₃CCH–NH₃are further consistent with free or nearly free internal rotation of the methyl top against the ammonia top. For NCCCH–OH₂, the acetylenic proton is hydrogen bonded to the oxygen of the water. The complex has a dynamicalC_2vstructure, as evidenced by the presence of two nuclear-spin modifications of the complex. The hydrogen bond lengths and hydrogen-bond stretching force constants are 2.212 Å and 10.8 N/m, 2.322 Å and 6.0 N/m, and 2.125 Å and 9.6 N/m for NCCCH–NH₃, CH₃CCH–NH₃, and NCCCH–OH₂, respectively. For the cyanoacetylene complexes, these bond lengths and force constants lie between the values for the related hydrogen cyanide and acetylene complexes of NH₃and H₂O. The NH₃bending and weak-bond stretching force constants for CH₃CCH–NH₃are less than those found in NCCCH–NH₃, NCH–NH₃, and HCCH–NH₃, suggesting that the hydrogen bonding interaction is particularly weak in CH₃CCH–NH₃. The weakness of this hydrogen bond is partially a consequence of the orientation of the monomer electric dipole moments in the complex. In CH₃CCH–NH₃the antialigned monomer dipole moments lead to a repulsive dipole–dipole interaction energy, while in NCH–NH₃and NCCCH–NH₃the aligned dipoles give an attraction interaction.     

Mid-infrared luminescence of Dy~(3+)-doped Ga_2S_3–Sb_2S_3–CsI chalcohalide glasses

The mid-infrared(MIR) luminescent properties of Dy~(3+) ions in a new chalcohalide glass host, Ga_2S_3–Sb_2S_3–CsI,are investigated; and the suitability of the doped glass for MIR fiber lasers is evaluated. The Dy~(3+)-doped chalcohalide glasses exhibit good thermal stability and intense MIR emissions around 2.96 μm and 4.41 μm. These emissions show quantum efficiencies(η) as high as ~60%, and have relatively large stimulated emission cross sections(σem). The low phonon energy(~307 cm~(-1)) of the host glass accounts for the intense MIR emissions, as well as the high η. These favorable thermal and emission properties make the Dy~(3+)-doped Ga_2S_3–Sb_2S_3–CsI glasses promising materials for MIR fiber amplifiers or lasers.     

Spectral dispersion of linear optical properties for Sm2O3 doped B2O3–PbO–Al2O3 glasses

Glasses having composition (B₂O₃)₂₅ (PbO)₇₀ (Al₂O₃)₅ (Sm₂O₃)_x ,where x=0, 0.5, 1, 2, 3 and 5 g were prepared using the normal melt quench technique. Spectral reflectance and transmittance at normal incidence of the glass samples are recorded with a spectrophotometer in the spectral range 220–2200 nm. These measured values are introduced into analytical expressions to calculate the real and imaginary parts of the refractive indices. Wemple–DiDomenico single oscillator model and one-term Sellmeier dispersion relations are used to model the real refractive indices. Dispersion parameters such as: single oscillator energy, dispersion energy, lattice oscillating strength, average oscillator wavelength, average oscillator strength and Abbe's number are deduced and compared. Absorption dispersion parameters such as: Fermi energy, optical energy gap for direct and indirect transitions, Urbach energy and steepness parameter are calculated. Effects of doping Sm₂O₃ on these linear optical parameters are investigated and interpreted.     

Broadband 1.5-μm emission of high erbium-doped Bi2O3–B2O3–Ga2O3 glasses

High Erbium-doped glass showing the wider 1.5-μm emission band is reported in the Bi₂O₃–B₂O₃–Ga₂O₃ system and its thermal stability and optical properties such as absorption, emission spectra, absorption and stimulated emission cross-sections and fluorescence lifetime are investigated. Compared with other glass hosts, the gain bandwidth properties of high Er³⁺ content in BBG glass are better than those of tellurite, germanate, silicate and phosphate glasses. The broad and flat ⁴I_13/2→⁴I_15/2 emission and the larger stimulated emission cross-section of Er³⁺ ions around 1.5 μm enable it to be used as a host material for potential broadband optical amplifiers at C and L bands in the microchip configuration.     

The broadband NIR emission properties of Bi doped La2O3–Al2O3–SiO2 glass

Bi₂O₃ doped 65SiO₂–20Al₂O₃–15La₂O₃ (in mole%) glasses were prepared by the traditional melting–quenching method. The spectroscopic properties and mechanism of NIR broadband emission in these glasses were investigated in this work. Three excitation wavelengths of 500, 700 and 800 nm were used to test emission spectra. The emission band under 500 nm excitation can be regarded as combination of emission bands under 700 and 800 nm excitation. 2.0 mole% is found to be the optimal Bi₂O₃ doping level in this glass. Under 500 nm excitation its emission peak, FWHM and lifetime of emission band are 1160 nm, 300 nm and 569 μs, respectively. The longest fluorescent lifetime reaches 620 μs under 700 nm excitation. The valence state of Bi in these glasses is suggested to be lower than +3 by X-ray photoelectron spectroscopy. With the help of energy matching, we infer that both Bi⁰ and Bi⁺ centers are responsible for the NIR fluorescence of Bi₂O₃ doped 65SiO₂–20Al₂O₃–15La₂O₃ glass.     

Manifestation of up-conversion in Yb3+/Tm3+ doped Li2O–Y2O3–SiO2 glass system

In this study, we have investigated the principal role of Y₂O₃ on the emission features of Tm³⁺ ion and up-conversion phenomenon in Tm³⁺ and Yb³⁺ co-doped Li₂O–Y₂O₃–SiO₂ glass system. The concentration of Y₂O₃ is varied from 0 to 5 mol% while that of Yb³⁺ and Tm³⁺ is fixed. When the glasses are doped with Tm³⁺ ions, the intense blue and red emissions were observed, whereas Yb³⁺ doped glasses exhibited NIR emission at about 980 nm. When the glasses are co-doped with Tm³⁺ and Yb³⁺ ions and excited at 900 nm, the blue and red emission lines were observed to be reinforced and strengthened with increase in the concentration of Y₂O₃. The IR emission band detected at about 1.8 μm due to ³F₄ → ³H₆ transition of Tm³⁺ ions is also observed to be strengthened due to co-doping. The reasons for enhancement in the intensity of various emission bands due to co-doping have been identified and discussed with the help of rate equations for various emission transitions.     

The system Na2CO3–MgCO3 at 3 GPa

It was suggested that Na–Mg carbonates might play a substantial role in mantle metasomatic processes through lowering melting temperatures of mantle peridotites. Taking into account that natrite, Na₂CO₃, eitelite, Na₂Mg(CO₃)₂, and magnesite, MgCO₃, have been recently reported from xenoliths of shallow mantle (110–115?km) origin, we performed experiments on phase relations in the system Na₂CO₃–MgCO₃ at 3?GPa and 800–1250°C. We found that the subsolidus assemblages comprise the stability fields of Na-carbonate?+?eitelite and eitelite?+?magnesite with the transition boundary at 50?mol% Na₂CO₃. The Na-carbonate–eitelite eutectic was established at 900°C and 69?mol% Na₂CO₃. Eitelite melts incongruently to magnesite and a liquid containing about 55?mol% Na₂CO₃ at 925?±?25 °C. At 1050 °C, the liquid, coexisting with Na-carbonate, contains 86–88?mol% Na₂CO₃. Melting point of Na₂CO₃ was established at 1175?±?25 °C. The Na₂CO₃ content in the liquid coexisting with magnesite decreases to 31?mol% as temperature increases to 1250°C. According to our data, the Na- and Mg-rich carbonate melt, which is more alkaline than eitelite, can be stable at the P–T conditions of the shallow lithospheric mantle with thermal gradient of 45?mW/m² corresponding to temperature of 900 °C at 3?GPa.