十六烷基三甲基溴化铵插层氧化石墨结构的分子模拟

利用分子模拟方法研究了十六烷基三甲基溴化铵(C16TAB)分子数对C16TAB/GO插层复合物的结构变化,探讨了C16TAB在GO层间的排列方式,并通过实验数据进行验证。模拟结果表明,优化后GO结构模型的层间距为0.849 nm;C16TAB/GO插层复合物的层间距随着C16TAB分子数的增加呈5个阶梯状逐渐增大,层间距分别为1.56、1.98、2.33、2.76和3.40 nm,插层饱和时C16TAB分子达到28个。实验结果显示,随着C16TAB分子数的增加,C16TAB/GO插层复合物的层间距逐渐增大,插层饱和时为3.40 nm,实验结果与模拟结果能够很好地吻合。C16TAB在GO层间可能的排列方式为1~5层平躺排列或单层平躺、单层倾斜和单层直立,从能量和结构的角度探明了C16TAB在GO层间的最优排列为1~5层平躺排列。     

长链烷基季铵盐插层氧化石墨的结构变化

基于改进的Hummers法制备氧化石墨(GO),并以长链烷基季铵盐(C_nTAB)对其进行插层处理;通过改变C_nTAB的链长、浓度,得到系列C_nTAB/GO插层复合物。采用XRD和元素分析对产物的最大底面间距及C_nTAB插入量进行表征。结果表明,随着C_nTAB链长的增长、C_nTAB浓度的增大,C_nTAB/GO插层复合物的最大底面间距逐渐增大。C_nTAB通过离子键作用和疏水键作用插入到GO层间,在GO片层上的吸附规律符合修正型(Modified)Langmuir模型,即C_nTAB以单分子层吸附在GO片层上。根据C_nTAB/GO插层复合物最大底面间距及C_nTAB插入量的变化规律分析,得出C_nTAB在GO层间的排布模式有单层平躺模式、类双层平躺模式、单层倾斜模式和单层直立模式。     

长链烷基季铵盐插层氧化石墨的结构变化

基于改进的Hummers法制备氧化石墨(GO),并以长链烷基季铵盐(CnTAB)对其进行插层处理;通过改变CnTAB的链长、浓度,得到系列CnTAB/GO插层复合物。采用XRD和元素分析对产物的最大底面间距及CnTAB插入量进行表征。结果表明,随着Cn TAB链长的增长、CnTAB浓度的增大,CnTAB/GO插层复合物的最大底面间距逐渐增大。CnTAB通过离子键作用和疏水键作用插入到GO层间,在GO片层上的吸附规律符合修正型(Modified)Langmuir模型,即CnTAB以单分子层吸附在GO片层上。根据CnTAB/GO插层复合物最大底面间距及CnTAB插入量的变化规律分析,得出CnTAB在GO层间的排布模式有单层平躺模式、类双层平躺模式、单层倾斜模式和单层直立模式。     

层状钨基氧化物复合材料的合成与电子特性

W₂O₆·H₂O /一元烷基胺复合物[(C_nH_2n+1NH₂，n=4、8、12、16)嵌入层状氧化钨W₂O₆·H₂O] 的XRD、IR、TG-DSC分析表明：烷基胺C_nH_2n+1NH₂能基于质子加合的机制嵌入W₂O₆·H₂O层间，且插层复合物之间烷基胺的插入与抽出是个可逆过程；烷基胺嵌入层间后以全反式构象双层排布，层间距d随烷基胺碳原子数的增加而线性增长，烷基链与层板的夹角为71.6°。插层复合物UV-Vis分析发现，各种复合物的禁带宽度相对半导体氧化钨的禁带宽度变宽了很多，这表明可以通过嵌入不同的物质来调节氧化钨层与层之间的电子传递能力。     

长链烷胺及手性钛的螯合物Ti[(OC2H4)3N][OCH(CH3)2]在层状V2O5中的插层行为

用一种简便快速方法合成了一系列长链有机胺插层V₂O₅化合物. 用粉末X射线衍射(XRD)、红外光谱(FT-IR)、漫反射紫外-可见光谱(DR UV-VIS)等手段对插层产品的结构进行了表征. 除了正十六胺插层V₂O₅产品外, 其它长链烷胺插层V₂O₅产品的层间距d₀₀₁与长链烷胺碳数n之间具有良好的线性关系: d₀₀₁＝0.160n_C＋0.731 nm. 正十六胺与V₂O₅反应后生成两个插层相, 一个相的层间距d₀₀₁为4.01 nm, 另一相的d₀₀₁为3.20 nm. 此外, 研究了手性钛的螯合物Ti[(OC₂H₄)₃N][OCH(CH₃)₂] (记为TEAIP)在V₂O₅层间的插层行为, 得到相应的插层产品.     

高岭石-硬脂酸插层复合物的制备及结构模型的提出

以张家口高岭土为原料,通过直接插层与取代相结合的方法制备高岭石-硬脂酸插层复合物.利用 X射线粉末衍射、红外光谱、热重及透射电子显微镜对制备产物进行表征.结果表明:硬脂酸插入到高岭石层间,高岭石层间距d₀₀₁值由0.72 nm增加到4.05~4.37 nm,插层率达到86.9%;反应时间和溶液pH值会对高岭石-硬脂酸插层复合物的层间距及插层率产生影响;甲氧基嫁接在高岭石表面,与硬脂酸分子同时存在于高岭石层间.高岭石经甲醇改性后脱羟基温度明显降低,高岭石羟基活性提高;高岭石-硬脂酸插层复合物的稳定温度在160 ℃以下.经过硬脂酸插层改性后的高岭石片层,从边缘开始出现卷曲现象,并且部分长条状片层形成类似埃洛石相的纳米卷;对硬脂酸插层高岭石的作用机理进行分析,结合结构计算,提出高岭石-硬脂酸插层复合物的结构模型,该模型可以解释高岭石-硬脂酸插层复合物在不同条件制备产物层间距变化的原因.     

杂化钙钛矿(NH3C6H12NH3)CuCl4的制备与表征

采用低温溶液法合成了含有二铵阳离子结构的新型二维层状结构的有机/无机杂化钙钛矿材料（NH₃C₆H₁₂NH₃） CuCl₄。采用元素分析、红外光谱、X射线衍射和紫外-可见光吸收光谱等手段对其结构与性能进行了表征。结果表明该材料的紫外-可见吸收光谱吸收峰位于285 nm和387 nm,层间距为1.18 nm。二铵阳离子的引入,使有机层⁺NH₃C₆H₁₂NH₃+与2个相邻的无机框架CuCl₄^2-分别通过较强的氢键结合在一起,排列更为规整,热稳定性更高。与单铵阳离子结构的杂化钙钛矿材料相比,由于不存在两层有机分子层间较弱的范德华力,（NH₃C₆H₁₂NH₃） CuCl₄材料的电阻率为1.36×10⁵ Ω·cm,比单胺结构的杂化钙钛矿材料的电阻率低3个数量级。     

长链烷胺及手性钛的螯合物Ti[(OC2H4)3N][OCH(CH3)2]在层状V2O5中的插层行为

用一种简便快速方法合成了一系列长链有机胺插层V₂O₅化合物. 用粉末X射线衍射(XRD)、红外光谱(FT-IR)、漫反射紫外-可见光谱(DR UV-VIS)等手段对插层产品的结构进行了表征. 除了正十六胺插层V₂O₅产品外, 其它长链烷胺插层V₂O₅产品的层间距d₀₀₁与长链烷胺碳数n之间具有良好的线性关系: d₀₀₁＝0.160n_C＋0.731 nm. 正十六胺与V₂O₅反应后生成两个插层相, 一个相的层间距d₀₀₁为4.01 nm, 另一相的d₀₀₁为3.20 nm. 此外, 研究了手性钛的螯合物Ti[(OC₂H₄)₃N][OCH(CH₃)₂] (记为TEAIP)在V₂O₅层间的插层行为, 得到相应的插层产品.     

含两个酰胺基团的卟啉二聚体分子间氢键引起的发光光谱红移

通过5-（4-甲酸基苯基）-10,15,20-三（4-十二烷氧基苯基）卟啉（HAcTPP）与乙二胺,丙二胺和丁二胺反应,制备了一类含2个酰胺基团的卟啉二聚体C₂（AmTPP）₂、C₃（AmTPP）₂和C₄（AmTPP）₂以及相应的配合物Pt2C₂（AmTPP）₂、Pt2C₃（AmTPP）₂和Pt2C₄（AmTPP）₂。采用¹H NMR、¹³C NMR、质谱、元素分析、循环伏安、紫外-可见吸收光谱和荧光发射光谱等对二聚体的化学结构、热稳定性、电化学和光物理性质进行了表征。实验发现,二聚体和相应的铂配合物的光致发光（PL）光谱性质与溶液的浓度有关,在10^-7 mol·L^-1 THF稀溶液中,二聚体与单羧基卟啉的PL光谱基本一致。当浓度增加到10^-3 mol·L^-1 THF溶液时,二聚体的光致发光光谱最大值从657 nm红移到675 nm,比单羧基卟啉红移了18 nm。当与金属铂配位后,这种发射光谱随浓度增加而变化的特性更加明显。二聚体配合物在10^-7 mol·L^-1 THF稀溶液中PL光谱就产生了红移现象,最大发射峰λ_max为673 nm,比单羧基卟啉红移16 nm。在高浓度10^-4 mol·L^-1 THF溶液和升华薄膜中的PL最大发射峰进一步红移到727 nm的近红外区。进一步,为了证实二聚体配合物分子间的π-π和Pt-Pt相互作用,我们以配合物Pt2C₃（AmTPP）₂为例,对二聚体配合物固体在常温和低温77 K的PL光谱进行了测试,发现固体配合物表现出与温度相关的PL性质。当温度降到77 K时,配合物的最大发射峰从658 nm红移到674 nm,红移了16 nm。实验表明,卟啉二聚体和相应的配合物的红移现象与二聚体的分子结构直接相关,卟啉二聚体中的两个酰胺基团能够产生较强的分子间氢键,导致二聚体分子之间产生一定程度的π-π和Pt-Pt相互作用,使得二聚体PL光谱产生红移。     

二氧化钛柱撑层状氧化锰微孔材料的合成及表征

Na型层状锰氧化物于0.1 mol/L HCl 溶液中离子交换制得前驱体H型层状锰氧化物. H型层状锰氧化物在十二胺乙醇溶液中反应得到层间距为2.62 nm的中间产物——十二胺插入的层状锰氧化物, 该中间产物在异丙醇钛和乙醇的混合溶液中溶剂热处理得到层间距为1.24 nm的钛酸柱撑层状锰氧化物. 在300 ℃条件下经2 h焙烧得到二氧化钛铸型氧化锰微孔材料. 应用XRD, DSC-TGA, SEM, TEM, IR, 氮气吸附实验及元素分析进行了不同阶段所得试样的分析表征. 结果表明十二胺分子在锰氧层间的最大插入量为2.2 mmol/g, 异丙醇钛分子的置换插入生成了组成为Mn_7.00Ti_1.74O_23.3(C₁₂H₂₅NH₂)_0.52•1.93H₂O的铸型层状锰氧化物. 300 ℃焙烧处理所得二氧化钛铸型氧化锰微孔材料的比表面积为140 m²/g.     

Synthesis and UV absorption properties of 5, 5′-thiodisalicylic acid intercalated Zn−Al layered double hydroxides

5, 5′-Thiodisalicylic acid (TDSA) has been intercalated into a ZnAl-NO₃ layered double hydroxide (LDH) by an ion-exchange reaction. After intercalation of TDSA, the basal spacing in the LDH increased from 0.89 to 1.53 nm, suggesting that the TDSA anions were arranged in the interlayer galleries of ZnAl-TDSA-LDH as a tilted monolayer arrangement of dianions. The samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetry and differential thermal analysis (TGA-DTA), and UV-Visible spectroscopy (UV-Vis). The results show that the NO₃⁻ anions in the precursor have been completely replaced by TDSA anions to give ZnAl-TDSA-LDH having crystalline-layered structure. Detailed studies reveal the presence of a complex system of supramolecular interactions between LDH layers and TDSA anions. TGA-DTA curves suggest that the thermostability of TDSA was markedly enhanced by intercalation in the LDH host. Photostability tests show that the film of ZnAl-TDSA-LDH/PP possessed higher stability to UV radiation than either the film of TDSA/PP or pristine PP.     

Oriented structure of octadecyl acridine orange intercalated in the monolayer and Langmuir–Blodgett film of octadecyl adenine‐thymine base pairs

The oriented structure of acridine orange (AO) in both monolayer and Langmuir–Blodgett (LB) film has been studied by optical waveguide (OWG) spectroscopy using polarized incident light. Mixed monolayer and LB films, consisting of octadecyl acridine orange (C₁₈‐AO) incorporated in stacked base pairs of octadecyl adenine (C₁₈‐Ade) and octadecyl thymine (C₁₈‐Thy), were prepared on a quartz waveguide. Absorption of transverse electric field (TE) polarized light was about twice that of transverse magnetic field (TM) polarized light. Both OWG spectra have λ_max at 500 nm, which is characteristic of monomeric AO molecules. This result strongly suggests that C₁₈‐AO molecules were dispersed uniformly in the mixed monolayer and were excited more effectively by the TE polarized light. Since the absorption moment of AO molecules is related to their long axis, it is proposed that C₁₈‐AO molecules are incorporated in C₁₈‐Ade/C₁₈‐Thy pairs with the long axis parallel to the layer surface. The absorbance at 500 nm was proportional to the number of layers on the waveguide. The dichroic ratio of the absorbance at 500 nm for TE polarized light to that for TM polarized light was constant regardless of the number of layers. The C₁₈‐AO molecules were uniformly incorporated in each layer with the long axis relatively parallel to the layer surface. Copyright © 2004 John Wiley & Sons, Ltd.     

三聚磷酸二氢铝与有机胺的插层反应特征

采用IR、XRD、SEM、EDS、DT-TG和滴定实验等技术手段研究主体三聚磷酸二氢铝(ATP)与客体甲胺、乙胺、正丙胺和正丁胺等有机胺的插层反应特性。 实验结果表明,ATP与甲胺、乙胺、正丙胺、正丁胺发生了化学反应,有机胺中的N与ATP层间-OH上的H形成配位键。 这些有机胺通过插层反应改变了ATP的酸性、层间距和热分解温度,但没有改变颗粒的层状形貌。 层间距从0.795 nm增大至1.71 nm,层间距d与有机胺的碳原子数Cn呈线性关系：d=0.229Cn+0.811,R2=0.9986。 有机胺分子链越长则越具有剥离倾向。     

Intercalation behavior of n-alkylamines into an A-site defective layered perovskite H2W2O7

Intercalation behavior of n-alkylamines into a protonated form of an A-site defective layered perovskite H₂W₂O₇ has been investigated. Results from XRD indicate these materials are layered with the corresponding interlayer spacing governed by the n-alkylamine chain length, and a reversible intercalation and deintercalation property is observed among these intercalation compounds. The IR spectra of the intercalation compounds with n-alkylamines clearly show that n-alkyl chains possess an all-trans conformation, and H₂W₂O₇ accommodate n-alkylamines (C_nH_2n+1NH₂: n=3, 4, 7, 8, 12, 16) to form intercalation compounds via an acid-base mechanism. A linear relationship between the interlayer distance and the number of carbon atoms in n-alkyl chains is observed to show a bilayer arrangement of the n-alkyl chains with a tilt angle of ∼71.6°. Elemental analysis studies reveal that the amounts of intercalated n-alkylamines are about 2.0 mol per [W₂O₇]. Despite the surface geometry of H₂W₂O₇ is almost identical to those of layered perovskites H₂[A_n−1B_nO_3n+1], the amounts of intercalated n-alkylamines of them are different. A reasonable explanation is given through our research.     

Formation and thermal decomposition of pyridine intercalates of α- and γ-zirconium phosphates

The intercalation of pyridine into α-ZrP takes place with an accompanying uptake of one more mole of water to form a dihydrate Zr(HPO₄)_1.55(C₅H₅NHPO₄)_0.45 · 2 H₂O which has an interlayer spacing of 10.9 Å and contains two types of water with different thermostabilities. The pyridine intercalate of γ-ZrP with 12.3 Å spacing is formed by the replacement of interlayer water by the gest molecules without any appreciable change in interlayer spacing and its composition is Zr(HPO₄)_1.56 (C₅H₅NHPO₄)_0.44 · 0.7 H₂O. The α-intercalate undergoes dehydration at below 140°C, accompanied by its separation into a pyridine-free phase (ζ-ZrP) and a pyridine enriched one, and this dehydration is immediately followed by the desorption of pyridine, resulting in the overall conversion of the initial phase to ζ-ZrP. The γ-intercalate, on the other hand, releases its water without any phase separation at similar temperatures but its depyridination temperature at 250°C is about 110°C higher than that for the other. A molecular packing model is proposed to explain the interlayer spacings, compositions, and thermal decomposition properties of both intercalates.     

Stable UV absorption material synthesized by intercalation of squaric acid anion into layered double hydroxides

A novel UV absorption material of squaric acid (SA) anion (O₄O₄^2?) intercalated layered double hydroxides (LDHs) was successfully synthesized by the co-precipitation method. After intercalation, the interlayer distance of MgAl-SA-LDHs increased to 1.04 nm compared to those of MgAl-CO₃-LDHs and SA anions present in form of a monolayer in the interlayer of LDHs. Thermal stability of SA clearly enhanced by the intercalation and the suppression of the deintercalation ability of MgAl-SA-LDHs was superior to that of 4-hydroxy-3-methoxybenzoic acid intercalated LDHs. The results of UV-DRS indicate the potential application of MgAl-SA-LDHs as UV absorbers.