Least‐squares meshfree method for incompressible Navier–Stokes problems

A least‐squares meshfree method based on the first‐order velocity–pressure–vorticity formulation for two‐dimensional incompressible Navier–Stokes problem is presented. The convective term is linearized by successive substitution or Newton's method. The discretization of all governing equations is implemented by the least‐squares method. Equal‐order moving least‐squares approximation is employed with Gauss quadrature in the background cells. The boundary conditions are enforced by the penalty method. The matrix‐free element‐by‐element Jacobi preconditioned conjugate method is applied to solve the discretized linear systems. Cavity flow for steady Navier–Stokes problem and the flow over a square obstacle for time‐dependent Navier–Stokes problem are investigated for the presented least‐squares meshfree method. The effects of inaccurate integration on the accuracy of the solution are investigated. Copyright © 2004 John Wiley & Sons, Ltd.     

Effect of boundary vorticity discretization on explicit stream‐function vorticity calculations

The numerical solution of the time‐dependent Navier–Stokes equations in terms of the vorticity and a stream function is a well tested process to describe two‐dimensional incompressible flows, both for fluid mixing applications and for studies in theoretical fluid mechanics. In this paper, we consider the interaction between the unsteady advection–diffusion equation for the vorticity, the Poisson equation linking vorticity and stream function and the approximation of the boundary vorticity, examining from a practical viewpoint, global iteration stability and error. Our results show that most schemes have very similar global stability constraints although there may be small stability gains from the choice of method to determine boundary vorticity. Concerning accuracy, for one model problem we observe that there were cases where the boundary vorticity discretization did not propagate to the interior, but for the usual cavity flow all the schemes tested had error close to second order. Copyright © 2005 John Wiley & Sons, Ltd.     

Estimate of the truncation error of finite volume discretization of the Navier–Stokes equations on colocated grids

A methodology is proposed for the calculation of the truncation error of finite volume discretizations of the incompressible Navier–Stokes equations on colocated grids. The truncation error is estimated by restricting the solution obtained on a given grid to a coarser grid and calculating the image of the discrete Navier–Stokes operator of the coarse grid on the restricted velocity and pressure field. The proposed methodology is not a new concept but its application to colocated finite volume discretizations of the incompressible Navier–Stokes equations is made possible by the introduction of a variant of the momentum interpolation technique for mass fluxes where the pressure part of the mass fluxes is not dependent on the coefficients of the linearized momentum equations. The theory presented is supported by a number of numerical experiments. The methodology is developed for two‐dimensional flows, but extension to three‐dimensional cases should not pose problems. Copyright © 2005 John Wiley & Sons, Ltd.     

A modular,operator‐splitting scheme for fluid–structure interaction problems with thick structures

We present an operator‐splitting scheme for fluid–structure interaction (FSI) problems in hemodynamics, where the thickness of the structural wall is comparable to the radius of the cylindrical fluid domain. The equations of linear elasticity are used to model the structure, while the Navier–Stokes equations for an incompressible viscous fluid are used to model the fluid. The operator‐splitting scheme, based on the Lie splitting, separates the elastodynamics structure problem from a fluid problem in which structure inertia is included to achieve unconditional stability. We prove energy estimates associated with unconditional stability of this modular scheme for the full nonlinear FSI problem defined on a moving domain, without requiring any sub‐iterations within time steps. Two numerical examples are presented, showing excellent agreement with the results of monolithic schemes. First‐order convergence in time is shown numerically. Modularity, unconditional stability without temporal sub‐iterations, and simple implementation are the features that make this operator‐splitting scheme particularly appealing for multi‐physics problems involving FSI. Copyright © 2013 John Wiley & Sons, Ltd.     

The steady Navier–Stokes/energy system with temperature‐dependent viscosity—Part 1: Analysis of the continuous problem

In this first part we propose and analyse a model for the study of two‐dimensional incompressible Navier–Stokes equations with a temperature‐dependent viscosity. The flow is supposed in a mixed convection regime and considers an outflow region, leading to a strongly coupled problem between the Navier–Stokes and energy equations, which will be justified theoretically. The coupling in the continuous problem is treated by an outer temperature fixed point strategy. Existence results for a particular variational formulation follows from this study. Further, a particular uniqueness result for small data is also obtained. Copyright © 2007 John Wiley & Sons, Ltd.     

Two‐dimensional compact finite difference immersed boundary method

We present a compact finite differences method for the calculation of two‐dimensional viscous flows in biological fluid dynamics applications. This is achieved by using body‐forces that allow for the imposition of boundary conditions in an immersed moving boundary that does not coincide with the computational grid. The unsteady, incompressible Navier–Stokes equations are solved in a Cartesian staggered grid with fourth‐order Runge–Kutta temporal discretization and fourth‐order compact schemes for spatial discretization, used to achieve highly accurate calculations. Special attention is given to the interpolation schemes on the boundary of the immersed body. The accuracy of the immersed boundary solver is verified through grid convergence studies. Validation of the method is done by comparison with reference experimental results. In order to demonstrate the application of the method, 2D small insect hovering flight is calculated and compared with available experimental and computational results. Copyright © 2009 John Wiley & Sons, Ltd.     

Schwarz domain decomposition for the incompressible Navier–Stokes equations in general co‐ordinates

This paper describes a domain decomposition method for the incompressible Navier–Stokes equations in general co‐ordinates. Domain decomposition techniques are needed for solving flow problems in complicated geometries while retaining structured grids on each of the subdomains. This is the so‐called block‐structured approach. It enables the use of fast vectorized iterative methods on the subdomains. The Navier–Stokes equations are discretized on a staggered grid using finite volumes. The pressure‐correction technique is used to solve the momentum equations together with incompressibility conditions. Schwarz domain decomposition is used to solve the momentum and pressure equations on the composite domain. Convergence of domain decomposition is accelerated by a GMRES Krylov subspace method. Computations are presented for a variety of flows. Copyright © 2000 John Wiley & Sons, Ltd.     

The (9,5) HOC formulation for the transient Navier–Stokes equations in primitive variable

We recently proposed an improved (9,5) higher order compact (HOC) scheme for the unsteady two‐dimensional (2‐D) convection–diffusion equations. Because of using only five points at the current time level in the discretization procedure, the scheme was seen to be computationally more efficient than its predecessors. It was also seen to capture very accurately the solution of the unsteady 2‐D Navier–Stokes (N–S) equations for incompressible viscous flows in the stream function–vorticity (ψ – ω) formulation. In this paper, we extend the scope of the scheme for solving the unsteady incompressible N–S equations based on primitive variable formulation on a collocated grid. The parabolic momentum equations are solved for the velocity field by a time‐marching strategy and the pressure is obtained by discretizing the elliptic pressure Poisson equation by the steady‐state form of the (9,5) scheme with the Neumann boundary conditions. In particular, for pressure, we adopt a strategy on the collocated grid in conjunction with ideas borrowed from the staggered grid approach in finite volume. We first apply this extension to a problem having analytical solution and then to the famous lid‐driven square cavity problem. We also apply our formulation to the backward‐facing step problem to see how the method performs for external flow problems. The results are presented and are compared with established numerical results. This new approach is seen to produce excellent comparison in all the cases. Copyright © 2007 John Wiley & Sons, Ltd.     

Solution of the incompressible Navier–Stokes equations by the method of lines

The numerical method of lines (NUMOL) is a numerical technique used to solve efficiently partial differential equations. In this paper, the NUMOL is applied to the solution of the two‐dimensional unsteady Navier–Stokes equations for incompressible laminar flows in Cartesian coordinates. The Navier–Stokes equations are first discretized (in space) on a staggered grid as in the Marker and Cell scheme. The discretized Navier–Stokes equations form an index 2 system of differential algebraic equations, which are afterwards reduced to a system of ordinary differential equations (ODEs), using the discretized form of the continuity equation. The pressure field is computed solving a discrete pressure Poisson equation. Finally, the resulting ODEs are solved using the backward differentiation formulas. The proposed method is illustrated with Dirichlet boundary conditions through applications to the driven cavity flow and to the backward facing step flow. Copyright © 2015 John Wiley & Sons, Ltd.     

Fourth‐order compact formulation of Navier–Stokes equations and driven cavity flow at high Reynolds numbers

A new fourth‐order compact formulation for the steady 2‐D incompressible Navier–Stokes equations is presented. The formulation is in the same form of the Navier–Stokes equations such that any numerical method that solve the Navier–Stokes equations can easily be applied to this fourth‐order compact formulation. In particular, in this work the formulation is solved with an efficient numerical method that requires the solution of tridiagonal systems using a fine grid mesh of 601 × 601. Using this formulation, the steady 2‐D incompressible flow in a driven cavity is solved up to Reynolds number with Re = 20 000 fourth‐order spatial accuracy. Detailed solutions are presented. Copyright © 2005 John Wiley & Sons, Ltd.     

Steady‐state solution of incompressible Navier–Stokes equations using discrete least‐squares meshless method

A fractional step method for the solution of the steady state incompressible Navier–Stokes equations is proposed in this paper in conjunction with a meshless method, named discrete least‐squares meshless (DLSM). The proposed fractional step method is a first‐order accurate scheme, named semi‐incremental fractional step method, which is a general form of the previous first‐order fractional step methods, i.e. non‐incremental and incremental schemes. One of the most important advantages of the proposed scheme is its capability to use large time step sizes for the solution of incompressible Navier–Stokes equations. DLSM method uses moving least‐squares shape functions for function approximation and discrete least‐squares technique for discretization of the governing differential equations and their boundary conditions. As there is no need for a background mesh, the DLSM method can be called a truly meshless method and enjoys symmetric and positive‐definite properties. Several numerical examples are used to demonstrate the ability and the efficiency of the proposed scheme and the discrete least‐squares meshless method. The results are shown to compare favorably with those of the previously published works. Copyright © 2010 John Wiley & Sons, Ltd.     

Combined compact difference method for solving the incompressible Navier–Stokes equations

This paper presents a numerical method for solving the two‐dimensional unsteady incompressible Navier–Stokes equations in a vorticity–velocity formulation. The method is applicable for simulating the nonlinear wave interaction in a two‐dimensional boundary layer flow. It is based on combined compact difference schemes of up to 12th order for discretization of the spatial derivatives on equidistant grids and a fourth‐order five‐ to six‐alternating‐stage Runge–Kutta method for temporal integration. The spatial and temporal schemes are optimized together for the first derivative in a downstream direction to achieve a better spectral resolution. In this method, the dispersion and dissipation errors have been minimized to simulate physical waves accurately. At the same time, the schemes can efficiently suppress numerical grid‐mesh oscillations. The results of test calculations on coarse grids are in good agreement with the linear stability theory and comparable with other works. The accuracy and the efficiency of the current code indicate its potential to be extended to three‐dimensional cases in which full boundary layer transition happens. Copyright © 2011 John Wiley & Sons, Ltd.     

Simulation of two‐phase flow with moving immersed boundaries

A two‐dimensional multi‐phase model for immiscible binary fluid flow including moving immersed objects is presented. The fluid motion is described by the incompressible Navier–Stokes equation coupled with a phase‐field model based on van der Waals' free energy density and the Cahn–Hilliard equation. A new phase‐field boundary condition was implemented with minimization of the free energy in a direct way, to specifically improve the physical behavior of the contact line dynamics for moving immersed objects. Numerical stability and execution time were significantly improved by the use of the new boundary condition. Convergence toward the analytical solution was demonstrated for equilibrium contact angle, the Lucas–Washburn theory and Stefan's problem. The proposed model may be used for multi‐phase flow problems with moving boundaries of complex geometry, such as the penetration of fluid into a deformable, porous medium. Copyright © 2010 John Wiley & Sons, Ltd.     

Parallel solution of three‐dimensional Marangoni flow in liquid bridges

This paper describes the implementation and performances of a parallel solver for the direct numerical simulation of the three‐dimensional and time‐dependent Navier–Stokes equations on distributed‐memory, massively parallel computers. The feasibility of this approach to study Marangoni flow instability in half zone liquid bridges is examined. The results indicate that the incompressible, non‐linear Navier–Stokes problem, governing the Marangoni flows behavior, can effectively be parallelized on a distributed memory parallel machine by remapping the distributed data structure. The numerical code is based on a three‐dimensional Simplified Marker and Cell (SMAC) primitive variable method applied to a staggered finite difference grid. Using this method, the problem is split into two problems, one parabolic and the other elliptic A parallel algorithm, explicit in time, is utilized to solve the parabolic equations. A parallel multisplitting kernel is introduced for the solution of the pseudo pressure elliptic equation, representing the most time‐consuming part of the algorithm. A grid‐partition strategy is used in the parallel implementations of both the parabolic equations and the multisplitting elliptic kernel. A Message Passing Interface (MPI) is coded for the boundary conditions; this protocol is portable to different systems supporting this interface for interprocessor communications. Numerical experiments illustrate good numerical properties and parallel efficiency. In particular, good scalability on a large number of processors can be achieved as long as the granularity of the parallel application is not too small. However, increasing the number of processors, the Speed‐Up is ever smaller than the ideal linear Speed‐Up. The communication timings indicate that complex practical calculations, such as the solutions of the Navier–Stokes equations for the numerical simulation of the instability of Marangoni flows, can be expected to run on a massively parallel machine with good efficiency. Copyright © 1999 John Wiley & Sons, Ltd.     

A fractional-step method for the incompressible Navier–Stokes equations related to a predictor–multicorrector algorithm

An implicit fractional-step method for the numerical solution of the time-dependent incompressible Navier–Stokes equations in primitive variables is studied in this paper. The method, which is first-order-accurate in the time step, is shown to converge to an exact solution of the equations. By adequately splitting the viscous term, it allows the enforcement of full Dirichlet boundary conditions on the velocity in all substeps of the scheme, unlike standard projection methods. The consideration of this method was actually motivated by the study of a well-known predictor–multicorrector algorithm, when this is applied to the incompressible Navier–Stokes equations. A new derivation of the algorithm in a general setting is provided, showing in what sense it can also be understood as a fractional-step method; this justifies, in particular, why the original boundary conditions of the problem can be enforced in this algorithm. Two different finite element interpolations are considered for the space discretization, and numerical results obtained with them for standard benchmark cases are presented. © 1998 John Wiley & Sons, Ltd.     

Finite element and implicit Runge–Kutta implementation of an acoustics–convection upstream resolution algorithm for the time‐dependent two‐dimensional Euler equations

The second of a two‐paper series, this paper details a solver for the characteristics‐bias system from the acoustics–convection upstream resolution algorithm for the Euler and Navier–Stokes equations. An integral formulation leads to several surface integrals that allow effective enforcement of boundary conditions. Also presented is a new multi‐dimensional procedure to enforce a pressure boundary condition at a subsonic outlet, a procedure that remains accurate and stable. A classical finite element Galerkin discretization of the integral formulation on any prescribed grid directly yields an optimal discretely conservative upstream approximation for the Euler and Navier–Stokes equations, an approximation that remains multi‐dimensional independently of the orientation of the reference axes and computational cells. The time‐dependent discrete equations are then integrated in time via an implicit Runge–Kutta procedure that in this paper is proven to remain absolutely non‐linearly stable for the spatially‐discrete Euler and Navier–Stokes equations and shown to converge rapidly to steady states, with maximum Courant number exceeding 100 for the linearized version. Even on relatively coarse grids, the acoustics–convection upstream resolution algorithm generates essentially non‐oscillatory solutions for subsonic, transonic and supersonic flows, encompassing oblique‐ and interacting‐shock fields that converge within 40 time steps and reflect reference exact solutions. Copyright © 2005 John Wiley & Sons, Ltd.     

Simulation of self‐propelled anguilliform swimming by local domain‐free discretization method

The local domain‐free discretization method is extended in this work to simulate fluid–structure interaction problems, the class of which is exemplified by the self‐propelled anguilliform swimming of deforming bodies in a fluid medium. Given the deformation of the fish body in its own reference frame, the translational and rotational motions of the body governed by Newton's Law are solved together with the surrounding flow field governed by Navier–Stokes equations. When the body is deforming and moving, no mesh regeneration is required in the computation. The loose coupling strategy is employed to simulate the fluid–structure interaction involved in the self‐propelled swimming. The local domain‐free discretization method and an efficient algorithm for classifying the Eulerian mesh points are described in brief. To validate the fluid–structure interaction solver, we simulate the ‘lock‐in’ phenomena associated with the vortex‐induced vibrations of an elastically mounted cylinder. Finally, we demonstrate applications of the method to two‐dimensional and three‐dimensional anguilliform‐swimming fish. The kinematics and dynamics associated with the center of mass are shown and the rotational movement is also presented via the angular position of the body axis. The wake structure is visualized in terms of vorticity contours. All the obtained numerical results show good agreement with available data in the literature. Copyright © 2011 John Wiley & Sons, Ltd.     

Fourth‐order accurate compact‐difference discretization method for Helmholtz and incompressible Navier–Stokes equations

A fourth‐order accurate solution method for the three‐dimensional Helmholtz equations is described that is based on a compact finite‐difference stencil for the Laplace operator. Similar discretization methods for the Poisson equation have been presented by various researchers for Dirichlet boundary conditions. Here, the complicated issue of imposing Neumann boundary conditions is described in detail. The method is then applied to model Helmholtz problems to verify the accuracy of the discretization method. The implementation of the solution method is also described. The Helmholtz solver is used as the basis for a fourth‐order accurate solver for the incompressible Navier–Stokes equations. Numerical results obtained with this Navier–Stokes solver for the temporal evolution of a three‐dimensional instability in a counter‐rotating vortex pair are discussed. The time‐accurate Navier–Stokes simulations show the resolving properties of the developed discretization method and the correct prediction of the initial growth rate of the three‐dimensional instability in the vortex pair. Copyright © 2004 John Wiley & Sons, Ltd.     

Calculation of three‐dimensional turbulent flow with a finite volume multigrid method

A numerical method for the efficient calculation of three‐dimensional incompressible turbulent flow in curvilinear co‐ordinates is presented. The mathematical model consists of the Reynolds averaged Navier–Stokes equations and the k–ε turbulence model. The numerical method is based on the SIMPLE pressure‐correction algorithm with finite volume discretization in curvilinear co‐ordinates. To accelerate the convergence of the solution method a full approximation scheme‐full multigrid (FAS‐FMG) method is utilized. The solution of the k–ε transport equations is embedded in the multigrid iteration. The improved convergence characteristic of the multigrid method is demonstrated by means of several calculations of three‐dimensional flow cases. Copyright © 1999 John Wiley & Sons, Ltd.     

Effect of vertical grid variability on a free surface flow model

A previously developed numerical model that solves the incompressible, non‐hydrostatic, Navier–Stokes equations for free surface flow is analysed on a non‐uniform vertical grid. The equations are vertically transformed to the σ‐coordinate system and solved in a fractional step manner in which the pressure is computed implicitly by correcting the hydrostatic flow field to be divergence free. Numerical consistency, accuracy and efficiency are assessed with analytical methods and numerical experiments for a varying vertical grid discretization. Specific discretizations are proposed that attain greater accuracy and minimize computational effort when compared to a uniform vertical discretization. Published in 2007 by John Wiley & Sons, Ltd.