Upon a magnetic composite preparation based on magnetite and poly(succinimide)-b-poly(ethylene glycol) shell

Taking into account that magnetic particles with suitable surface characteristics have a high potential for the use in a lot of in vitro and in vivo applications, in the study is presented the in situ preparation of a core-shell magnetic composite based on the magnetite core and the shell composed from the poly(succinimide)-b-poly(ethylene glycol) copolymer. The average particle size of the synthesized magnetic microspheres is in the range of 6.5-8.8 μm with a magnetite content of around 11%. The saturation magnetization of the microspheres was found 26.8 emu/g, the magnetic microspheres being characterized by superparamagnetic properties. The particles have combined properties of high magnetic saturation and biocompatibility and interactive functions at the surface through the block copolymer shell. The surface of the magnetic particles has also the possibility for further functionalization or the attachment of various bioactive molecules after the hydrolysis of the succinimide cycle and the resulting carboxylic group.     

Studies of magnetite nanoparticles synthesized by thermal decomposition of iron (III) acetylacetonate in tri(ethylene glycol)

In this paper, water-soluble magnetite nanoparticles have been directly synthesized by thermal decomposition of iron (III) acetylacetonate, Fe(acac)₃ in tri(ethyleneglycol). Size and morphology of the nanoparticles are determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements while the crystal structure is identified using X-ray diffraction (XRD). Surface charge and surface coating of the nanoparticles are recognized using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectra (XPS) and zeta potential measurements. Magnetic properties are determined using vibrating sample magnetometer (VSM) and superconducting quantum interference device (SQUID) measurements. The results show that as-prepared magnetite nanoparticles are relatively monodisperse, single crystalline and superparamagnetic in nature with the blocking temperature at around 100 K. The magnetite nanoparticles are found to be highly soluble in water due to steric and electrostatic interactions between the particles arising by the surface adsorbed tri(ethyleneglycol) molecules and associated positive charges, respectively. Cytotoxicity studies on human cervical (SiHa), mouse melanoma (B16F10) and mouse primary fibroblast cells demonstrate that up to a dose of 80 μg/ml, the magnetic nanoparticles are nontoxic to the cells. Specific absorption rate (SAR) value has been calculated to be 885 and 539 W/gm for samples with the iron concentration of 1 and 0.5 mg/ml, respectively. The high SAR value upon exposure to 20 MHz radiofrequency signifies the applicability of as-prepared magnetite nanoparticles for a feasible magnetic hyperthermia treatment.     

Magnetic iron particles with high magnetization useful for immunoassay

TiO₂-encapsulated metallic Fe particles (Ti-O/Fe) were synthesized through a solid phase reaction. The Ti-O/Fe particles were non-toxic to tumor cells in a cell viability assay. After silica coating using a sol-gel method, streptavidin was covalently bound onto the Ti-O/Fe particles. Thus produced HMMI particles showed higher magnetization (114 Am²/kg) and a larger specific surface area (15 m²/g) than conventional streptavidin-immobilized magnetite particles. The high magnetization allowed for rapid magnetic separation, while the additional large specific surface area improved the detection of the adiponectin antigen both in terms of extended detection range and higher assay speed.     

Preparation and characterization of magnetic levan particles as matrix for trypsin immobilization

Magnetic levan was synthesized by co-precipitating D-fructofuranosyl homopolysaccharide with a solution containing Fe²⁺ and Fe³⁺ in alkaline conditions at 100 °C. The magnetic levan particles were characterized by scanning electron microscopy (SEM), magnetization measurements, X-ray diffractometry (XRD) and infrared spectroscopy (IR). Afterwards, magnetic levan particles were functionalized by NaIO₄ oxidation and used as matrices for trypsin covalent immobilization. Magnetite and magnetic levan particles were both heterogeneous in shape and levan-magnetite presented bigger sizes compared to magnetite according to SEM images. Magnetic levan particles exhibited a magnetization 10 times lower as compared to magnetite ones, probably, due to the coating layer. XRD diffractogram showed that magnetite is the dominant phase in the magnetic levan. Infrared spectroscopy showed characteristics absorption bands of levan and magnetite (O-H, C-O-C and Fe-O bonds). The immobilized trypsin derivative was reused 10 times and lost 16% of its initial specific activity only. Therefore, these magnetic levan particles can be proposed as an alternative matrices for enzyme immobilization.     

In situ hybridization to chitosan/magnetite nanocomposite induced by the magnetic field

Chitosan/magnetite nanocomposite was synthesized induced by magnetic field via in situ hybridization in ambient condition. Results of XRD patterns and TEM micrographs indicated that magnetite particles with 10–20 nm were dispersed in chitosan homogeneously. An interesting result is that magnetite nanoparticles were assembled to form chain-like structures under the influence of the external magnetic field, which mimics the magnetite chains inside of magnetotatic bacteria. The saturated magnetization (Ms) of nano-magnetite in chitosan was 50.54 emu/g, which is as high as 54% of bulk magnetite. The remanence (Mr) and coercivity (Hc) were 4 emu/g and14.8 Oe, respectively, which indicated that magnetite nanoparticles were superparamagnetic. The key of route is that a pre-precipitated chitosan hydrogel membrane, used as chemical reactor, which controlled the precipitation of chitosan precipitation and in situ transformation of magnetite from the precursor simultaneously in the magnetic field environment.     

Core-shell structure and magnetic properties of magnetite magnetic fluids stabilized with dextran

The adsorption process of different dextran molecules onto the surface of in water dispersed magnetite nanoparticles has been investigated to optimize the preparation of magnetite magnetic fluids (MMFs). An average magnetite core size of 7.1 nm was found by X-ray diffraction and that of 8 nm was found by transmission electron microscopy for the samples prepared at 90 °C. An average hydrodynamic diameter of 25 nm was observed by scanning electron microscopy and that of 25-300 nm was obtained by photon correlation spectroscopy. The dextran was adsorbed by physical adsorption, a molecular weight of 20 kDa gave the best stability of these MMFs. The shell layer of the particles was weakly negatively charged in buffer solutions of pH values between 5.5 and 9.5. The particles seem to be mainly stabilized by sterical repulsion. The maximum available saturation magnetization of the MMFs was 3.5 kA/m.     

The study on magnetite particles coated with bilayer surfactants

Magnetite particles were prepared by co-precipitation, then sodium oleic (SO) and sodium dodecyl benzene sulfonate (SDBS) were applied as inner and outer surfactants, respectively. IR and TG were used to study the surface adsorption of SO and SDBS on magnetite particles. The experimental results demonstrated that SO molecules were linked to the magnetite particles through chemical bond and SDBS coated on the surface of magnetite particles covered with SO by means of Van der Waals attraction. Furthermore, based on the adsorption isotherms of surfactants on the magnetite particles and the dependence of Zeta potential of particles on the surfactants concentrations, the adsorption mechanisms of these two surfactants on the magnetite particles were studied. The isotherm adsorption model for SO on magnetite particles showed excellent correlation to Langmuir type and the adsorption equation was (25 °C), while that for SDBS on magnetite particles coated with SO showed excellent consistence with Freundlich type and the adsorption equation was Γ = 0.32c^0.475 (25 °C). In addition, the results demonstrated that both SO and SDBS formed monolayer adsorption on the surface of magnetite particles.     

Synthesis and characterization of Co (Ni or Cu)-MCM-41 mesoporous molecular sieves with different amount of metal obtained by using microwave irradiation method

Co (Ni or Cu)-MCM-41 mesoporous molecular sieves with different amount of metal were synthesized by using cetyltrimethyl ammonium bromide as a template and by a novel microwave irradiation method. These samples were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and N₂ physical adsorption. The experimental results show that Co (Ni or Cu)-MCM-41 mesoporous molecular sieves were successfully synthesized. When the as-synthesized samples were calcined at 550 °C for 10 h, the template was effectively removed. Under microwave irradiation condition, Co-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 745.7-1188.8 m²/g and average pore sizes in a range of 2.46-2.75 nm; Ni-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 625.8-1161.3 m²/g and average pore sizes of ca. 2.7 nm; Cu-MCM-41 mesoporous molecular sieves have specific surface areas in a range of 601.6-1142.9 m²/g and average pore sizes in a range of 2.46-2.76 nm. On the other hand, with increasing the introduced metal amount, the specific surface area and pore volume of the synthesized Co (Ni or Cu)-MCM-41 mesoporous molecular sieves became small, and the mesoporous ordering of the samples became poor. Under the comparable synthesis conditions, the synthesized Co-MCM-41 mesoporous molecular sieve has a bigger specific surface area and a more uniform pore distribution as compared with the synthesized Ni-MCM-41and Cu-MCM-41 mesoporous molecular sieves.     

A Fourier transform infrared (FTIR) and thermogravimetric analysis (TGA) study of oleate adsorbed on magnetite nano-particle surface

Magnetite nano-particles were coated with sodium oleate and the spectral behaviour of the coating layer was studied by FTIR spectroscopy after the particles had been heated in air and argon. Magnetite was synthesized by controlled co-precipitation and subsequently coated with sodium oleate. Thermal analysis in combination with mass spectroscopy was carried out to support the FTIR spectroscopic interpretations, but also to monitor the decomposition and surface reaction of oleate adsorbed on the magnetite surface. It was deduced from FTIR and TGA results that the oleate molecules are bonded to iron atoms by a bidentate mononuclear complex and form essentially a single layer with a distance between oleate molecules of ∼36 Å². It was shown by IR as well as Raman spectroscopy that oleic acid, when heated in air, undergoes decomposition implying that new carbon-oxygen bonds are formed. Heating the iron oxide-oleate system in air also implies oxidation of the double bond at the C:9 position of the alkyl chain and formation of intermediate oxygen-rich molecules. An enthalpy change of ΔH = 49.86 J/g was obtained for oleate desorption/decomposition at ∼350 °C under argon atmosphere and a carbonaceous graphitic species resulted from this decomposition.     

Surface modification with EDTA molecule: A feasible method to enhance the adsorption property of ZnO

Surface-functionalized zinc oxide (ZnO) nanoparticles were synthesized with ethylene diamine tetraacetic acid (EDTA) as a modification agent, which were used as adsorbents in the adsorption of Cu²⁺ at certain conditions. The transmission electron microscopy (TEM) results show that the average size of ZnO particles is about 45 nm, and it exhibits hexagonal wurtzite structure. Fourier transform infrared (FTIR) spectra reveal that the EDTA species are chemically bonded on the surface of ZnO. Compared with bare ZnO particles, the functionalized ZnO nanoparticles have a better activity in the Cu²⁺ adsorption. The maximum adsorption capacity of functionalized ZnO nanoparticles is 20.97 mg/g, while it is 17.93 mg/g for the bare ZnO. The adsorption isotherm of bare ZnO particles is in accordance with the Freundlich model, and the chemical adsorption is in a dominant position in the adsorption process of Cu²⁺ on functionalized ZnO particles.     

Controllable synthesis and modification of carbon micro-spheres from deoiled asphalt

A series of size-controllable carbon micro-spheres (CMSs) were synthesized from deoiled asphalt by chemical vapour deposition, with the emphasis on the effect of reaction temperature, Ar flow rate and collection zone. Graphitized carbon micro-spheres (GCMSs) were obtained from as-prepared CMSs by vacuum heat treatment at 2000 °C for 1 h. Air oxidation was performed to realize functionalization of CMSs. Morphologies and structures of CMSs and GCMSs were characterized by field emission scanning electron microscopy, high-resolution transmission electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction and Raman spectroscopy, and the functional groups on the surface of GCMSs and CMSs were characterized by Fourier transformation infra-red spectrometry. Results show that effective mass production of size-controllable CMSs, with diameters ranging from 100 nm to 1 μm, was achieved. As-obtained high purity CMSs were spherical with uniform size and low graphitization degree, but the graphitization degree of GCMSs was enhanced obviously. By air oxidation, some oxygen-containing functional groups were introduced onto the surface of CMSs, while no functional groups were introduced onto the surface of GCMSs.     

A green synthetic approach to graphene nanosheets for hydrogen adsorption

A green and facile strategy of preparing graphene by reducing exfoliated graphite oxide (GO) with glucose was developed in this study. The as-prepared samples were characterized by X-ray diffraction (XRD), Raman spectroscopy, Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) and Atomic force microscopy (AFM). The characterization results indicated that the graphene sheets (GS) were of high quality with smooth surface, rich pore structure and few layer graphene. The samples have a BET specific surface area of 1205.8 m² g⁻¹ measured by N₂ adsorption at 77 K. The hydrogen storage capacity of 2.7 wt.% at 298 K and 25 bar demonstrated that the as-prepared graphene employing glucose as reductant is supposed to be a promising material with outstanding property for hydrogen storage.     

Characterization of mesoporous VOx/MCM-41 composite materials obtained via post-synthesis impregnation

Spherical-particle MCM-41 was synthesized at room temperature, and, then, impregnated with aqueous solutions of NH₄VO₃ to produce variously loaded VO_x/MCM-41 composite materials. Bulk and surface properties of the materials thus produced were characterized by means of X-ray powder diffractometry (XRD), infrared spectroscopy (FTIR), N₂ sorptiometry and X-ray photoelectron spectroscopy (XPS). Results obtained indicated that subsequent calcination at 550 °C (for 2 h) of the blank and impregnated MCM-41 particles, results in materials assuming the same bulk structure of MCM-41, and exposing uniformly mesporous, high area surfaces (P_w = 2.0-2.3 nm; 974-829 m²/g), except for the material obtained at 20 wt%-V₂O₅ that was shown to suffer a considerable loss on surface area (down to 503 m²/g). XPS results implied that the immobilization of the VO_x species occurs via interaction with surface OH/H₂O groups of MCM-41, leading to the formation of vanadate (VO₃⁻) surface species, as well as minor V-O-Si and V₂O₅-like species. However, in all cases, the vanadium sites remained pentavalent and exposed on the surface.     

Microwave synthesis, characterization, and electrochemical properties of α-Fe2O3 nanoparticles

Ultrafine α-Fe₂O₃ nanoparticles with an extremely narrow distribution were synthesized by microwave heating. Transmission electron microscopy (TEM) images showed that most primary particles have ellipsoid shapes, and the average diameter of the primary particles was less than 10 nm. The electron diffraction pattern and fringes in some particles in TEM images showed that these nanoparticles were single crystals. The BET surface area of the freeze-dried product was 217 m²/g. The initial discharge capacity of the α-Fe₂O₃ nanoparticles exceeded 1007 mA/g (cut-off voltage: 0.5 V). This large capacity corresponds to that calculated by assuming the reduction of Fe³⁺ to Fe⁰. The α-Fe₂O₃ nanoparticles also work as a rechargeable electrode material. The charge-discharge test between 4 V and 1.5 V gave a good rechargeable capacity of about 150 mAh/g.     

Novel hybrid nanostructured materials of magnetite nanoparticles and pectin

A novel hybrid nanostructured material comprising superparamagnetic magnetite nanoparticles (MNPs) and pectin was synthesized by crosslinking with Ca²⁺ ions to form spherical calcium pectinate nanostructures, referred as MCPs, which were typically found to be 100-150 nm in size in dried condition, confirmed from transmission electron microscopy and scanning electron microscopy. The uniform size distribution was revealed from dynamic light scattering measurement. In aqueous medium the MCPs showed swelling behavior with an average size of 400 nm. A mechanism of formation of spherical MCPs is outlined constituting a MNP-pectin interface encapsulated by calcium pectinate at the periphery, by using an array of characterization techniques like zeta potential, thermogravimetry, Fourier transformed infrared and X-ray photoelectron spectroscopy. The MCPs were stable in simulated gastrointestinal fluid and ensured minimal loss of magnetic material. They exhibited superparamagnetic behavior, confirmed from zero field cooled and field cooled profiles and showed high saturation magnetization (M_s) of 46.21 emu/g at 2.5 T and 300 K. M_s decreased with increasing precursor pectin concentrations, attributed to quenching of magnetic moments by formation of a magnetic dead layer on the MNPs.     

Synthesis of aqueous ferrofluids of ZnxFe3−xO4 nanoparticles by citric acid assisted hydrothermal-reduction route for magnetic hyperthermia applications

Superparamagnetic and monodispersed aqueous ferrofluids of Zn substituted magnetite nanoparticles (Zn_xFe_3−xO₄, x=0, 0.25, 0.3, 0.37 and 0.4) were synthesized via hydrothermal-reduction route in the presence of citric acid, which is a facile, low energy and environmental friendly method. The synthesized nanoparticles were characterized by X ray diffraction (XRD) analysis, Fourier transform infrared (FTIR) spectroscopy, scanning and transmission electron microscopy (SEM and TEM) and the dynamic light scattering (DLS) method. The results showed that a certain amount of citric acid was required to obtain single phase Zn substituted magnetite nanoparticles. Citric acid acted as a modulator and reducing agent in the formation of spinel structure and controlled nanoparticle size and crystallinity. Mean particle sizes of the prepared nanoparticles were around 10 nm. The results that are obtained from XRD, magnetic and power loss measurements showed that the crystallinity, saturation magnetization (M_S) and loss power of the synthesized ferrofluids were all influenced by the substitution of Zn in the structure of magnetite. The Zn substituted magnetite nanoparticles obtained by this route showed a good stability in aqueous medium (pH 7) and hydrodynamic sizes below 100 nm and polydispersity indexes below 0.2. The calculated intrinsic loss power (ILP) for the sample x=0.3 (e.g. 2.36 nH m²/kg) was comparable to ILP of commercial ferrofluids with similar hydrodynamic sizes.     

Superparamagnetic silica nanoparticles with immobilized metal affinity ligands for protein adsorption

Superparamagnetic silica-coated magnetite (Fe₃O₄) nanoparticles with immobilized metal affinity ligands were prepared for protein adsorption. First, magnetite nanoparticles were synthesized by co-precipitating Fe²⁺ and Fe³⁺ in an ammonia solution. Then silica was coated on the Fe₃O₄ nanoparticles using a sol–gel method to obtain magnetic silica nanoparticles. The condensation product of 3-Glycidoxypropyltrimethoxysilane (GLYMO) and iminodiacetic acid (IDA) was immobilized on them and after charged with Cu²⁺, the magnetic silica nanoparticles with immobilized Cu²⁺ were applied for the adsorption of bovine serum albumin (BSA). Scanning electron micrograph showed that the magnetic silica nanoparticles with an average size of 190 nm were well dispersed without aggregation. X-ray diffraction showed the spinel structure for the magnetite particles coated with silica. Magnetic measurement revealed the magnetic silica nanoparticles were superparamagnetic and the saturation magnetization was about 15.0 emu/g. Protein adsorption results showed that the nanoparticles had high adsorption capacity for BSA (73 mg/g) and low nonspecific adsorption. The regeneration of these nanoparticles was also studied.     

Adsorption of octadecyltrichlorosilane on mesoporous SBA-15

Adsorption of octadecyltrichlorosilane (OTS) on mesoporous SBA-15 has been studied by using Brunauer-Emmett-Teller (BET) surface area analysis, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermo-gravimetric analysis (TGA) techniques. BET surface area analysis shows decrease of surface area from 930 to 416 m²/g after OTS adsorption. SEM pictures show close attachment of SBA-15 particles. EDAX measurements show increase of carbon weight percentage and decrease of oxygen and silicon weight percentage. XPS results closely support EDAX analysis. FTIR spectra shows presence of methyl (-CH₃) and methylene (-CH₂) bands and oriented OTS monolayer on SBA-15. Thermo-gravimetric analysis shows that the OTS adsorbed on SBA-15 are stable up to a temperature of 230 °C and that the OTS monolayers decompose between 230 and 400 °C.     

Novel synthesis and electrophoretic response of low density TiO-TiO2-carbon black composite

Novel low density TiO-TiO₂-carbon black composite was synthesized, which involved the deposition of inorganic coating on the surface of core-shell latex particles and subsequent removal of latex particles by calcination in high-purity nitrogen. The morphology and interior structure were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The images exhibited the composite had spherical shape and smooth surface, and the interior structure was hollow or porous. X-ray diffraction peaks (XRD) were mostly in agreement with the standard diffraction patterns of rutile TiO₂. In addition, the observed peaks at 2θ of 43.5°, 50.6° and 74.4° can be indexed to (1 1 1), (2 0 0) and (2 2 0) planes of cubic phase TiO. The X-ray photoelectron spectroscopy (XPS) results indicated that composite consisted of carbon black, TiO and TiO₂. The apparent density of the composite was suitable to 1.62 g cm⁻³, due to density matching with suspending media. Glutin-arabic gum microcapsules containing TiO-TiO₂-carbon black composite electrophoretic liquid were prepared via complex coacervation. The particles in the microcapsules showed excellent electrophoretic mobility under a DC field.     

Magnetite ferrofluid with high specific absorption rate for application in hyperthermia

A magnetite ferrofluid coated by dextran with a high specific absorption rate (SAR) of 75 W/g in an AC field of 55 kHz and 200 Oe was prepared by the gel crystallization method with ultrasonic treatment. For comparison, uncoated magnetite particles with a mean diameter of 50 nm were also fabricated. Several possible mechanisms such as Brownian, Neel and diffusion relaxation processes on heating effects and their influence on SAR are discussed. Several factors which can increase the value of SAR were discussed, including dextran coating, ultrasonic treatment, proper particle size and the presence of defects and disorder in the particles.