准脆性材料的弹塑性各向异性损伤耦合本构模型研究

针对准脆性材料的非线性特征：强度软化和刚度退化、单边效应、侧限强化和拉压软化、不可恢复变形、剪胀及非弹性体胀,在热动力学框架内,建立了准脆性材料的弹塑性与各向异性损伤耦合的本构关系。对准脆性材料的变形机理和损伤诱发的各向异性进行了诠释,并给出了损伤构形和有效构形中各物理量之间的关系。在有效应力空间内,建立了塑性屈服准则、拉压不同的塑性随动强化法则和各向同性强化法则。在损伤构形中,采用应变能释放率,建立了拉压损伤准则、拉压不同的损伤随动强化法则和各向同性强化法则。基于塑性屈服准则和损伤准则,构建了塑性势泛函和损伤势泛函,并由正交性法则,给出了塑性和损伤强化效应内变量的演化规律,同时,联立塑性屈服面和损伤加载面,给出了塑性流动和损伤演化内变量的演化法则。将损伤力学和塑性力学结合起来,建立了应变驱动的应力-应变增量本构关系,给出了本构数值积分的要点。以单轴加载-卸载往复试验识别和校准了本构材料常数,并对单轴单调试验、单轴加载-卸载往复试验、二轴受压、二轴拉压试验和三轴受压试验进行了预测,并与试验结果作了比较,结果表明,所建本构模型对准脆性材料的非线性材料性能有良好的预测能力。     

考虑路径相关性的非比例循环塑性本构模型

根据非比例加载下金属材料响应的延迟特性及加载路径相关性,选取沿应力迹法向的塑性应变的累积量作为非比例加载影响的度量,相应给出反映非比例附加强化的变量,并假设其模量和强化率与加载路径的几何参数相关．为反映由于非比例加载而引起的材料强化的异向效应,在Valanis的塑性内时响应方程中引入与加载路径几何性质有关的应力项,构成非比例循环塑性本构关系．对316和304不锈钢材料在一些典型非比例循环加载路径下的应力响应进行了理论预测,与Benallal等及McDowell的实验结果取得了良好的一致．     

A thermodynamic formulation of finite-deformation elastoplasticity with hardening based on the concept of material isomorphism

This paper presents a thermodynamic formulation of a model for finite deformation of materials exhibiting elastoplastic material behaviour with non-linear isotropic and kinematic hardening. Central to this formulation is the notion that the form of the elastic constitutive relation be unaffected by the plastic deformation or transformation in the material, as commonly assumed in particular in the context of crystal plasticity. When generalized to the phenomenological context, this implies that the internal variable representing plastic deformation is an elastic material isomorphism. Among other things, this requirement on the plastic deformation leads directly to the standard elastoplastic multiplicative decomposition of the deformation gradient. In addition, a dependence of the plastic part of the free energy on the plastic deformation itself yields a thermodynamic form for the centre of the elastic range of the material, i.e. the back stress. Finally, we show how this approach can be applied to formulate thermodynamic forms for linear, and non-linear Armstrong-Frederick, kinematic hardening models.     

Constitutive modeling of strain range dependent cyclic hardening

In this paper, a new approach for constitutive modeling of strain range dependent cyclic hardening is proposed by extending the kinematic hardening model based on the critical state of dynamic recovery. It is assumed that isotropic, as well as kinematic, hardening consists of several parts, and that each part of isotropic hardening evolves when the corresponding part of kinematic hardening is in the critical state of dynamic recovery. The extended model is capable of simulating the cyclic hardening behavior in which different characteristics of cyclic hardening appear depending on strain range. The model is verified by simulating the relatively large cyclic straining tests of 304 stainless steel at ambient temperature, in which cyclic hardening does not stabilize before rupture if strain range exceeds a certain value. The model is further verified by predicting the history dependence of cyclic hardening under incremental cyclic loading and the maximum plastic strain dependence of strain hardening in cyclic tension.     

Constitutive modeling of cyclic plasticity deformation of a pure polycrystalline copper

Cyclic plasticity experiments were conducted on a pure polycrystalline copper and the material was found to display significant cyclic hardening and nonproportional hardening. An effort was made to describe the cyclic plasticity behavior of the material. The model is based on the framework using a yield surface together with the Armstrong–Frederick type kinematic hardening rule. No isotropic hardening is considered and the yield stress is assumed to be a constant. The backstress is decomposed into additive parts with each part following the Armstrong–Frederick type hardening rule. A memory surface in the plastic strain space is used to account for the strain range effect. The Tanaka fourth order tensor is used to characterize nonproportional loading. A set of material parameters in the hardening rules are related to the strain memory surface size and they are used to capture the strain range effect and the dependence of cyclic hardening and nonproportional hardening on the loading magnitude. The constitutive model can describe well the transient behavior during cyclic hardening and nonproportional hardening of the polycrystalline copper. Modeling of long-term ratcheting deformation is a difficult task and further investigations are required.     

Cyclic stress-strain behaviour of alloy AA6060 T4, part II: Biaxial experiments and modelling

Laboratory tests have been conducted to investigate the inelastic behaviour of aluminium alloy AA6060 T4 subjected to non-proportional cyclic loading. The results of four tests with variable strain path shapes and strain amplitudes are reported in this paper. The tests were carried out by applying combined axial force and torque to thin-walled tubular specimens, using effective strain amplitudes in the range 0.4–0.8%. Major emphasis has been put on the two important material properties: plastic anisotropy and influence of strain range and strain path shapes on cyclic hardening. A constitutive model for cyclic plasticity is used to predict the stress response of the alloy for the non-proportional strain paths applied in the experiments. The model adopts a quadratic yield function and multi-component non-linear isotropic and kinematic hardening rules to describe plastic anisotropy, the shape of the hysteresis loops and the evolution of cyclic hardening. Good agreement is obtained between the physical and correlated stress response of the alloy.     

Nonlocal gradient-dependent modeling of plasticity with anisotropic hardening

This work addresses the formulation of the thermodynamics of nonlocal plasticity using the gradient theory. The formulation is based on the nonlocality energy residual introduced by Eringen and Edelen (1972). Gradients are introduced for those variables associated with isotropic and kinematic hardening. The formulation applies to small strain gradient plasticity and makes use of the evanescent memory model for kinematic hardening. This is accomplished using the kinematic flux evolution as developed by Zbib and Aifantis (1988). Therefore, the present theory is a four nonlocal parameter-based theory that accounts for the influence of large variations in the plastic strain, accumulated plastic strain, accumulated plastic strain gradients, and the micromechanical evolution of the kinematic flux. Using the principle of virtual power and the laws of thermodynamics, thermodynamically-consistent equations are derived for the nonlocal plasticity yield criterion and associated flow rule. The presence of higher-order gradients in the plastic strain is shown to enhance a corresponding history variable which arises from the accumulation of the plastic strain gradients. Furthermore, anisotropy is introduced by plastic strain gradients in the form of kinematic hardening. Plastic strain gradients can be attributed to the net Burgers vector, while gradients in the accumulation of plastic strain are responsible for the introduction of isotropic hardening. The equilibrium between internal Cauchy stress and the microstresses conjugate to the higher-order gradients frames the yield criterion, which is obtained from the principle of virtual power. Microscopic boundary conditions, associated with plastic flow, are introduced to supplement the macroscopic boundary conditions of classical plasticity. The nonlocal formulation developed here preserves the classical assumption of local plasticity, wherein plastic flow direction is governed by the deviatoric Cauchy stress. The theory is applied to the problems of thin films on both soft and hard substrates. Numerical solutions are presented for bi-axial tension and simple shear loading of thin films on substrates.     

考虑塑性应变记忆恢复的循环棘轮本构模型研究

在统一粘塑性循环本构理论框架下,以Ohno-Abdel-Karim非线性随动硬化模型为基础,建立了一个循环本构模型。模型通过引入塑性应变幅值记忆效应,并在塑性应变记忆项中加入恢复系数,提高了对循环硬化材料单轴棘轮行为的预言能力。将模型应用于316L不锈钢单轴棘轮行为的描述中,模拟不同平均应力、应力幅值下的棘轮应变,均与实验数据吻合较好,证明本文改进的本构模型能合理地描述循环硬化材料的单轴棘轮行为。     

On coupled gradient-dependent plasticity and damage theories with a view to localization analysis

Combinations of gradient plasticity with scalar damage and of gradient damage with isotropic plasticity are proposed and implemented within a consistently linearized format. Both constitutive models incorporate a Laplacian of a strain measure and an internal length parameter associated with it, which makes them suitable for localization analysis.The theories are used for finite element simulations of localization in a one-dimensional model problem. The physical relevance of coupling hardening/softening plasticity with damage governed by different damage evolution functions is discussed. The sensitivity of the results with respect to the discretization and to some model parameters is analyzed. The model which combines gradient-damage with hardening plasticity is used to predict fracture mechanisms in a Compact Tension test.     

A comparison between crystal and isotropic strain gradient plasticity theories with accent on the role of the plastic spin

In the small deformation range, we consider crystal and isotropic “higher-order” theories of strain gradient plasticity, in which two different types of size effects are accounted for: (i) that dissipative, entering the model through the definition of an effective measure of plastic deformation peculiar of the isotropic hardening function and (ii) that energetic, included by defining the defect energy (i.e., a function of Nye's dislocation density tensor added to the free energy; see, e.g., [Gurtin, M.E., 2002. A gradient theory of single-crystal viscoplasticity that accounts for geometrically necessary dislocations. J. Mech. Phys. Solids 50, 5–32]). In order to compare the two modellings, we recast both of them into a unified deformation theory framework and apply them to a simple boundary value problem for which we can exploit the Γ-convergence results of [Bardella, L., Giacomini, A., 2008. Influence of material parameters and crystallography on the size effects describable by means of strain gradient plasticity. J. Mech. Phys. Solids 56 (9), 2906–2934], in which the crystal model is made isotropic by imposing that any direction be a possible slip system. We show that the isotropic modelling can satisfactorily approximate the behaviour described by the isotropic limit obtained from the crystal modelling if the former constitutively involves the plastic spin, as in the theory put forward in Section 12 of [Gurtin, M.E., 2004. A gradient theory of small-deformation isotropic plasticity that accounts for the Burgers vector and for dissipation due to plastic spin. J. Mech. Phys. Solids 52, 2545–2568]. The analysis suggests a criterium for choosing the material parameter governing the plastic spin dependence into the relevant Gurtin model.     

Framework using functional forms of hardening internal state variables in modeling elasto-plastic-damage behavior

This work gives the thermodynamically consistent theoretical formulations and the numerical implementation of a plasticity model fully coupled with damage. The formulation of the elasto-plastic-damage behavior of materials is introduced here within a framework that uses functional forms of hardening internal state variables in both damage and plasticity. The damage is introduced through a damage mechanics framework and utilizes an anisotropic damage measure to quantify the reduction of the material stiffness. In deriving the constitutive model, a local yield surface is used to determine the occurrence of plasticity and a local damage surface is used to determine the occurrence of damage. Isotropic hardening and kinematic hardening are incorporated as state variables to describe the change of the yield surface. Additionally, a damage isotropic hardening is incorporated as a state variable to describe the change of the damage surface. The hardening conjugate forces (stress-like terms) are general nonlinear functions of their corresponding hardening state variables (strain-like terms) and can be defined based on the desired material behavior. Various exponential and power law functional forms are studied in this formulation. The paper discusses the general concept of using such functional forms. however, it does not address the relevant appropriateness of certain forms to solve different problems. The proposed work introduces a strong coupling between damage and plasticity by utilizing damage and plasticity flow rules that are dependent on both the plastic and damage potentials. However, in addition to that the coupling is further enhanced through the use of the functional forms of the hardening variables introduced in this formulation.The use of this formulation in solving boundary value problems will be presented in future work. The fully implicit backward Euler scheme is developed for this model to be solved in a Newton–Raphson solution procedure.     

Anisotropic plasticity for sheet metals using the concept of combined isotropic-kinematic hardening

Hill's 1948 anisotropic theory of plasticity (Hill, R., 1948. A theory of yielding and plastic flow of anisotropic metals. Proc. Roy. Soc. London A193, 281–297) is extended to include the concept of combined isotropic-kinematic hardening, and the objective of this paper is to validate the model so that it may be useful for analyses of sheet metal forming. Isotropic hardening and kinematic hardening may be experimentally observed in sheet metals, if yielding is defined by the proportional limit or by a small proof strain. In this paper, a single exponential term is used to describe isotropic hardening and Prager's linear kinematic hardening rule is applied for simplicity. It is shown that this model can satisfactorily describe both the yield stress and the plastic strain ratio, the R-ratio, observed in tension test of specimens cut at various angles measured from the rolling direction of the sheet. Kinematic hardening leads to a gradual change in the direction of the plastic strain increment, as the axial strain increases in the tension test; while in the traditional approach for sheet metal, this direction does not change due to the use of isotropic hardening.     

Plastic Strain Energy Model for Rock Salt Under Fatigue Loading

The fatigue test for rock salt is conducted to investigate the effects of stress amplitude, loading frequency and loading rate on the plastic strain energy, from which the evaluation rule of the plastic strain energy is analyzed, which is divided into three stages: cyclic hardening,saturation and cyclic softening. The total accumulated plastic strain energy only depends on the mechanical behavior of rock salt, but is immune to the loading conditions. A novel model for fatigue life prediction is proposed based on the invariance of the total plastic dissipation energy and the stability of the plastic energy per cycle.     

Modeling the Bauschinger effect for sheet metals,part I: theory

It is essential to model the Bauschinger effect correctly for sheet metal forming process simulation and subsequent springback prediction when material points are subjected to cyclic loading conditions. The combined nonlinear hardening model for time independent cyclic plasticity, proposed by Chaboche and co-workers, is examined and a simple modification is suggested for the isotropic part of the hardening rule to utilize the conventional tensile test data directly. This modification is useful for the materials whose reverse loading curves saturate to the monotonic loading curve. In addition, an anisotropic nonlinear kinematic hardening model (ANK model) is proposed in an attempt to represent the Bauschinger effect more realistically. Possible offset in flow stress is modeled by treating the back stress evolution during reverse loading differently from the initial loading. This strategy coupled with the modified isotropic hardening rule seems to provide a way to model the Bauschinger effect consistently over multiple cycles. Two types of auto-body alloys are examined in this paper. Associated material parameters are determined by employing available tension-compression test data and multi-cycle bend test data. A developed finite element formulation is applied to analyze simple validation type of problems. The cyclic stress–strain curves generated from the proposed ANK model match remarkably well with measured data.     

Kinematic hardening in large strain plasticity

A finite strain hyper elasto-plastic constitutive model capable to describe non-linear kinematic hardening as well as non-linear isotropic hardening is presented. In addition to the intermediate configuration and in order to model kinematic hardening, an additional configuration is introduced – the center configuration; both configurations are chosen to be isoclinic. The yield condition is formulated in terms of the Mandel stress and a back-stress with a structure similar to the Mandel stress.It is shown that the non-dissipative part of the plastic velocity gradient not governed by the thermodynamical framework and the corresponding quantity associated with the kinematic hardening influence the material behaviour to a large extent when kinematic hardening is present. However, for isotropic elasticity and isotropic hardening plasticity it is shown that the non-dissipative quantities have no influence upon the stress–strain relation.As an example, kinematic hardening von Mises plasticity is considered, which fulfils the plastic incompressibility condition and is independent of the hydrostatic pressure. To evaluate the response and to examine the influence of the non-dissipative quantities, simple shear is considered; no stress oscillations occur.     

Application of a discrete polycrystal model to the analysis of cyclic straining in copper

A discrete polycrystal model, designed to simulate a metal aggregate macro-element, is applied to the study of cyclic straining in copper. The numerical method of solution (an adaptation of the “finite element method”) incorporates a convergent discrete Green's function within the constrained minimum principle which governs the (crystallographic) plastic shear increments at each load step. Isothermal elastic moduli of copper crystals and Taylor's hardening rule with constant hardening modulus are used in the calculations. Numerical results are obtained for macroscopic elastic properties, cyclic stress-strain curves (which indicate the contribution of aggregate heterogeneity to macroscopic hardening), macroscopic plastic work, and residual (latent) strain energy through four loading cycles between fixed macrostrain limits. Other estimates for elastic properties also are included, and all results are compared, both qualitatively and quantitatively, with published experiments. The predictions of the model are in general satisfactory.     

Plastic yielding in cyclically loaded porous materials

The present paper focuses on plastic yielding of cyclically loaded porous materials. Unit cell models are employed to observe the evolution of the yield surface of porous materials under cyclic loading conditions. Non-linear isotropic as well as non-linear kinematic hardening matrix materials are considered. The yield surfaces computed with the unit cell models are compared to predictions of a micro-mechanical porous plasticity model that incorporates hardening. It is found that, in the case of kinematic hardening, the porous plasticity model underestimates the yield strength for larger hydrostatic stresses. An improvement of the model is proposed, so that a reasonable micro-mechanical approach to model porous materials under cyclic loadings is found.     

Damage accumulation for growth of anti-plane crack in work-hardening material

Elastic–plastic solutions of an anti-plane crack in an infinite body are used in conjunction with a continuum damage model to describe the conditions necessary for the onset of crack instability, fatigue crack propagation due to cyclic loading, and rates of crack growth due to time dependent events. A power law relates the stress to the strain of the material. The damage, which invokes nucleation, growth and coalescence of microvoids due to elevated strain, is confined to the plastic zone surrounding the crack tip. For applied loading below the yield stress, the small-scale and large-scale yielding solutions are used to determine the influence of strain hardening on crack instability and failure. Crack growth due to cyclic loading and time-dependent deformations are studied using the small-scale yielding solution of the deformation theory of plasticity.     

高温合金材料循环相关热机械疲劳寿命预测

在变温非线性运动强化规律所描述的高温合金材料热机械寿命应力－应变循环特性的基础上，讨论了应变控制的循环相关热机械疲劳寿命预测技术，所建模型采用了由应变以密度表示的损伤参数，并且引入了温度损伤系数，考虑了温度变化范围以及温度循环和应变循环相位关系对疲劳寿命的影响，在确定模型的一些参数，采用等温力学试验和疲劳试验的数据，为了把等温疲劳研究成果推广到变温疲劳分析领域，开辟了新的途径。     

Variational methods for the steady state response of elastic–plastic solids subjected to cyclic loads

Solids (or structures) of elastic–plastic internal variable material models and subjected to cyclic loads are considered. A minimum net resistant power theorem, direct consequence of the classical maximum intrinsic dissipation theorem of plasticity theory, is envisioned which describes the material behavior by determining the plastic flow mechanism (if any) corresponding to a given stress/hardening state. A maximum principle is provided which characterizes the optimal initial stress/hardening state of a cyclically loaded structure as the one such that the plastic strain and kinematic internal variable increments produced over a cycle are kinematically admissible. A steady cycle minimum principle, integrated form of the aforementioned minimum net resistant power theorem, is provided, which characterizes the structure’s steady state response (steady cycle) and proves to be an extension to the present context of known principles of perfect plasticity. The optimality equations of this minimum principle are studied and two particular cases are considered: (i) loads not exceeding the shakedown limit (so recovering known results of shakedown theory) and (ii) specimen under uniform cyclic stress (or strain). Criteria to assess the structure’s ratchet limit loads are given. These, together with some insensitivity features of the structure’s alternating plasticity state, provide the basis to the ratchet limit load analysis problem, for which solution procedures are discussed.