基于聚合物多齿配体的高性能CdTe量子点的微波水相合成

针对当前水相合成的量子点(QDs)光性能与稳定性等方面存在的不足,发展了基于聚合物多齿配体的水相制备策略.利用巯基修饰的聚丙烯酸(PAA-SH)作为多齿配体代替常用的巯基丙酸等单齿配体,结合微波辅助加热制备了CdTe量子点,研究了多齿配体对量子点的生长机制与荧光性能的影响.以PAA-SH为配体制备的CdTe量子点荧光性能优异(荧光量子效率(PLQY)可达75%),流体力学直径较小(~10 nm),稳定性也有明显提高.基于聚合物多齿配体的量子点制备技术有助于实现生物医学研究中急需的兼具高亮度、高稳定性、小尺寸等特征的高性能量子点生物探针的制备.     

Characterization of primary amine capped CdSe, ZnSe, and ZnS quantum dots by FT-IR: determination of surface bonding interaction and identification of selective desorption

Surface ligands of semiconductor quantum dots (QDs) critically influence their properties and functionalities. It is of strong interest to understand the structural characteristics of surface ligands and how they interact with the QDs. Three quantum dot (QD) systems (CdSe, ZnSe, and ZnS) with primary aliphatic amine capping ligands were characterized primarily by FT-IR spectroscopy as well as NMR, UV-vis, and fluorescence spectroscopy, and by transmission electron microscopy (TEM). Representative primary amines ranging from 8 to 16 carbons were examined in the vapor phase, KBr pellet, and neat and were compared to the QD samples. The strongest hydrogen-bonding effects of the adsorbed ligands were observed in CdSe QDs with the weakest observed in ZnS QDs. There was an observed splitting of the N-H scissoring mode from 1610 cm(-1) in the neat sample to 1544 and 1635 cm(-1) when bound to CdSe QDs, which had the largest splitting of this type. The splitting is attributed to amine ligands bound to either Cd or Se surface sites, respectively. The effect of exposure of the QDs dispersed in nonpolar medium to methanol as a crashing agent was also examined. In the CdSe system, the Cd-bound scissoring mode disappeared, possibly due to methanol replacing surface cadmium sites. The opposite was observed for ZnSe QDs, in which the Se-bound scissoring mode disappeared. It was concluded that surface coverage and ligand bonding partners could be characterized by FT-IR and that selective removal of surface ligands could be achieved through introduction of competitive binding interactions at the surface.     

PEG-ylated cationic CdSe/ZnS QDs as an efficient intracellular labeling agent

Quantum dots (QDs) have size-tunable optical properties, such as photostability, strong photoluminescence and a large Stokes-shift, which make it possible to adapt them to various biological applications. In many cases, surface modification of QDs by carboxylate ligands has been extensively studied. However, there have been few applications on QDs modified with a potential cationic ligand such as amine. In this study, we synthesized robust amine-functionalized QDs and modified their surface with poly(ethylene glycol) for long-term stability. These QDs showed an excellent stability over a broad pH-range and remarkable internalization efficiency into living cells.     

Hydrodynamic dimensions, electrophoretic mobility, and stability of hydrophilic quantum dots

Luminescent semiconductor quantum dots (QDs) have great potential for use in biological assays and imaging. These nanocrystals are capped with surface ligands (bifunctional molecules, amphiphilic polymers, phospholipids, etc.) that render them hydrophilic and provide them with functional properties. These coatings alters their hydrodynamic radii and surface charge, which can drastically affect properties such as diffusion within the cell cytoplasm. Heavy atom techniques such as transmission electron microscopy and X-ray scattering probe the inorganic core and do not take into account the ligand coating. Herein we use dynamic light scattering to characterize the hydrodynamic radius (R(H)) of CdSe-ZnS QDs capped with various hydrophilic surface coatings (including dihydrolipoic acid and amphiphilic polymers) and self-assembled QD-protein bioconjugates. Experiments were complemented with measurements of the geometric size and zeta potential using agarose gel electrophoresis and laser Doppler velocimetry. We find that the effects of surface ligands on the hydrodynamic radius and on the nanoparticle mobility are complex and strongly depend on a combination of the inorganic core size and nature and lateral extension of the hydrophilic surface coating. These properties are critical for the design of QD-based biosensing assays as well as QD bioconjugate diffusion in live cells.     

Effect of Surface Modification on Semiconductor Nanocrystal Fluorescence Lifetime

Semiconductor nanocrystals, namely, quantum dots (QDs), present a set of unique photoluminescence properties, which has led to increased interest in using them as advantageous alternatives to conventional organic dyes. Many applications of QDs involve surface modification to enhance the solubility or biocompatibility of the QDs. One of the least exploited properties of QDs is the very long photoluminescence lifetime that usually has complex kinetics owing to the effect of quantum confinement. Herein, we describe the effect of different surface modifications on the photoluminescence decay kinetics of QDs. The different surface modifications were carefully chosen to provide lipophilic or water‐soluble QDs with either positive or negative surface net charges. We also survey the effect on the QD lifetime of several ligands that interact with the QD surface, such as organic chromophores or fluorescent proteins. The results obtained demonstrate that time‐resolved fluorescence is a useful tool for QD‐based sensing to set the basis for the development of time‐resolved‐based nanosensors.     

Electrochemically Determining Electronic Structure of ZnO Quantum Dots with Different Surface Ligands

The electronic structure of quantum dots (QDs) including band edges and possible trap states is an important physical property for optoelectronic applications. The reliable determination of the energy levels of QDs remains a big challenge. Herein we employ cyclic voltammetry (CV) to determine the energy levels of three types of ZnO QDs with different surface ligands. Coupled with spectroscopic techniques, it is found that the onset potential of the first reductive wave is likely related to the conduction band edges while the first oxidative wave originates from the trap states. The determined specific energy levels in CV further demonstrates that the ZnO QDs without surface ligands mainly have oxygen interstitial defects whilst the ZnO QDs covered with ligands contain oxygen vacancies. The present electrochemical method offers a powerful and effective way to determine the energy levels of wide bandgap ZnO QDs, which will boost their device performance.     

表面配体对CdSe量子点发光性质的影响

本文采用热注入法合成了以油胺/油酸为表面配体的、粒径均一的CdSe量子点(CdSe QDs)。调节表面配体交换中辛硫醇与CdSe QDs的比例,研究了表面配体对CdSe QDs光致发光及电致化学发光性质的影响,并提出了CdSe QDs的发光模型。结果表明,辛硫醇表面配体显著影响CdSe QDs的带边发射和深能级陷阱发射,因而导致CdSe QDs光致发光强度的显著降低,以及电致化学发光强度的增加。上述结果为进一步提高量子点的发光性能提供了依据。     

Constraints in post-synthesis ligand exchange for hybrid organic (MEH-PPV)–inorganic (CdSe) nanocomposites

For an optimum charge/energy transfer performance of hybrid organic–inorganic colloidal nanocrystals for applications such as photonic devices and solar cells, the determining factors are the distance between the nanocrystal and polymer which greatly depends upon nanocrystal size/nanocrystal ligands. Short chain ligands are preferred to ensure a close contact between the donor and acceptor as a result of the tunnelling probability of the charges and the insulating nature of long alkyl chain molecules. Short distances increase the probability for tunnelling to occur as compared to long distances induced by long alkyl chains of bulky ligands which inhibit tunnelling altogether. The ligands on the as-synthesized nanocrystals can be exchanged for various other ligands to achieve desirable charge/energy transfer properties depending on the bond strength of the ligand on the nanocrystal compared to the replacement ligand. In this work, the constraints involved in post-synthesis ligand exchange process have been evaluated, and these factors have been tuned via wet chemistry to tailor the hybrid material properties via appropriate selection of the nanocrystal capping ligands. It has been found that both oleic acid and oleylamine (OLA)-capped cadmium selenide (CdSe) quantum dots (QDs) as compared with trioctylphosphine oxide (TOPO)-passivated CdSe QDs are of high quality, and they provide better steric stability against coagulation, homogeneity, and photostability to their respective polymer:CdSe nanocomposites. CdSe QDs particularly with OLA capping have relatively smaller surface energies, and thus, lesser quenching capabilities show dominance of photoinduced Forster energy transfer between donors (polymer) and acceptors (CdSe nanocrystals) as compared to charge transfer mechanism as observed in polymer:CdSe (TOPO) composites. It is conjectured that size quantization effects, stereochemical compatibility of ligands (TOPO, oleic acid, and oleyl amine), and polymer MEH-PPV stability greatly influence the photophysics and photochemistry of hybrid polymer–semiconductor nanocomposites.     

Controlled synthesis of CdSe quantum dots by a microwave-enhanced process: a green approach for mass production

A method that does not employ hot-injection techniques has been developed for the size-tunable synthesis of high-quality CdSe quantum dots (QDs) with zinc blende structure. In this environmentally benign synthetic route, which uses less toxic precursors, solvents, and capping ligands, CdSe QDs that absorb visible light are obtained. The size of the as-prepared CdSe QDs and thus their optical properties can be manipulated by changing the microwave reaction conditions. The QDs were characterized by XRD, TEM, UV/Vis, FTIR, time-resolved fluorescence spectroscopy, and fluorescence spectrophotometry. In this approach, the reaction is conducted in open air and at a much lower temperature than in hot-injection techniques. The use of microwaves in this process allows for a highly reproducible and effective synthesis protocol that is fully adaptable for mass production and can be easily employed to synthesize a variety of semiconductor QDs with the desired properties. Possible applications of the CdSe QDs were assessed by deposition on TiO(2) films.     

Near‐Infrared Active Lead Chalcogenide Quantum Dots: Preparation,Post‐Synthesis Ligand Exchange,and Applications in Solar Cells

Quantum dots (QDs) of lead chalcogenides (e.g. PbS, PbSe, and PbTe) are attractive near‐infrared (NIR) active materials that show great potential in a wide range of applications, such as, photovoltaics (PV), optoelectronics, sensors, and bio‐electronics. The surface ligand plays an essential role in the production of QDs, post‐synthesis modification, and their integration to practical applications. Therefore, it is critically important that the influence of surface ligands on the synthesis and properties of QDs is well understood for their applications in various devices. In this Review we elaborate the application of colloidal synthesis techniques for the preparation of lead chalcogenide based QDs. We specifically focus on the influence of surface ligands on the synthesis of QDs and their solution‐phase ligand exchange. Given the importance of lead chalcogenide QDs as potential light harvesters, we also pay particular attention to the current progress of these QDs in photovoltaic applications.     

Luminescence and stability of aqueous thioalkyl acid capped CdSe/ZnS quantum dots correlated to ligand ionization.

The spectroscopic properties of CdSe/ZnS quantum dots (QDs) were observed to change as a function of thioalkyl acid ligand. Experiments were performed using 2, 3, 6, and 11-carbon linear thioalkyl acids, as well as mercaptosuccinic acid (MSA) and dihydrolipoic acid (DHLA). Bathochromic shifts of up to 14 nm in the emission spectra of QDs capped with these ligands were observed. Similarly, hypsochromic or bathochromic shifts up to 7 nm were observed for a specific ligand in acidic or basic solution, respectively. These shifts could be correlated to the number of ionized ligands and the ability of the ligands to act as hole acceptors. It was also found that differences in quantum yield between the ligands were primarily due to variations in radiative decay rate and not nonradiative decay rate. This indicated that different degrees of QD surface passivation were not responsible for the differences, and that the radiative system must be considered as the sum of the ligands and the QD nanocrystal. The stability of QDs capped with mercaptoacetic acid, MSA, and DHLA towards aggregation at low pH was found to correlate with the pK(a) of the ligands. Spectral shifts were also observed during aggregation. Overall, the luminescence of thioalkyl acid capped QDs appears to be a complex function of dielectric constant, electrostatic or hole-acceptor interactions with ionized ligands, and, to a lesser extent, passivation.     

Controllable Blinking‐to‐Nonblinking Behavior of Aqueous CdTeS Alloyed Quantum Dots

Semiconductor quantum dots (QDs) are very important optical nanomaterials with a wide range of potential applications. However, the blinking of single QDs is an intrinsic drawback for some biological and photoelectric applications based on single‐dot emission. In this work, we systematically investigated the effects of certain synthetic conditions on the blinking behavior of aqueous CdTeS alloyed QDs, and observed that blinking behaviors of QDs were able to be controlled by the structure and concentration of the thiol compounds that were used as surface ligands. In optimal conditions, completely nonblinking QDs were prepared using certain thiol ligands as stabilizers in aqueous phase. The suppressed blinking mechanism was mainly attributed to elimination of QDs surface traps by coordination of thiol ligands with vacant Cd atoms, formation of appropriate CdS coating on QDs, and controlling the growth dynamics of QDs. Nonblinking QDs show high quantum yield, small size, and good solubility, and will be applied to some fields that were previously limited by blinking of traditional QDs.     

Surface chemistry of InP quantum dots: a comprehensive study

Advanced (1)H, (13)C, and (31)P solution and solid-state NMR studies combined with IR spectroscopy were used to probe, at the molecular scale, the composition and the surface chemistry of indium phosphide (InP) quantum dots (QDs) prepared via a non-coordinating solvent strategy. This nanomaterial can be described as a core-multishell object: an InP core, with a zinc blende bulk structure, is surrounded first by a partially oxidized surface shell, which is itself surrounded by an organic coating. This organic passivating layer is composed, in the first coordination sphere, of tightly bound palmitate ligands which display two different bonding modes. A second coordination sphere includes an unexpected dialkyl ketone and residual long-chain non-coordinating solvents (ODE and its isomers) which interact through weak intermolecular bonds with the alkyl chains of the carboxylate ligands. We show that this ketone is formed during the synthesis process via a decarboxylative coupling route and provides oxidative conditions which are responsible for the oxidation of the InP core surface. This phenomenon has a significant impact on the photoluminescence properties of the as-synthesized QDs and probably accounts for the failure of further growth of the InP core.     

Minimizing the hydrodynamic size of quantum dots with multifunctional multidentate polymer ligands

We report a new strategy to minimize the hydrodynamic size of quantum dots (QDs) and to overcome their colloidal stability and photobleaching problems based on the use of multifunctional and multidentate polymer ligands. A novel finding is that a balanced composition of thiol (-SH) and amine (-NH 2) coordinating groups grafted to a linear polymer chain leads to highly compact nanocrystals with exceptional colloidal stability, a strong resistance to photobleaching, and high fluorescence quantum yields. In contrast to the standing brushlike conformation of PEGylated dihydrolipoic acid molecules, mutlidentate polymer ligands can wrap around the QDs in a closed "loops-and-trains" conformation. This structure is highly stable thermodynamically and is responsible for the excellent colloidal and optical properties. We have optimized this process for the preparation of ultrastable CdTe nanocrystals and have found the strategy to be broadly applicable to a wide range of nanocrystalline materials and heterostructures. This work has led to a new generation of bright and stable QDs with small hydrodynamic diameters between 5.6 and 9.7 nm with tunable fluorescence emission from the visible (515 nm) to the near-infrared (720 nm). These QDs are well suited for molecular and cellular imaging applications in which the nanoparticle hydrodynamic size must be minimized.     

CsPbI3钙钛矿量子点的精细纯化及其高效发光二极管的研究

钙钛矿量子点发光二极管(QLEDs)因其色纯度高、颜色控制精准、色域广以及溶液可加工等特点, 在显示和照明等领域有着极大的应用前景. 针对红光钙钛矿CsPbI₃量子点纯化过程中相变和表面配体损失造成的荧光退化问题, 本工作发展了一种甲苯和乙酸乙酯协同的混合溶剂纯化策略, 能够避免纯化过程中的相变问题, 获得了纯立方相的CsPbI₃量子点; 此外, 进一步提出了油胺碘(OAmI)调控量子点表面态的配体补偿工艺, 解决了配体损失导致的荧光淬灭问题, 发现在引入400 μL的OAmI时, 量子点兼具高的发光效率(PLQY为70%)和优异的电学性能, 电驱动下的激子复合几率显著增加, 最终实现了亮度为3090 cd/m ²和外量子效率为15.67%的QLED. 这种钙钛矿CsPbI₃量子点精细纯化的方案对开发高效量子点材料和实现高性能光电子器件具有重要的指导意义.     

Colloidally Stable CdS Quantum Dots in Water with Electrostatically Stabilized Weak-Binding,Sulfur-Free Ligands

Colloidal quantum dot (QD) photocatalysts have the electrochemical and optical properties to be highly effective for a range of redox reactions. QDs are proven photo-redox catalysts for a variety of reactions in organic solvents but are less prominent for aqueous reactions. Aqueous QD photocatalysts require hydrophilic ligand shells that provide long-term colloidal stability but are not so tight-binding as to prevent catalytic substrates from accessing the QD surface. Common thiolate ligands, which also poison many co-catalysts and undergo photo-oxidative desorption, are therefore often not an option. This paper describes a framework for the design of water-solubilizing ligands that are in dynamic exchange on and off the QD surface, but still provide long-term colloidal stability to CdS QDs. The binding affinity and inter-ligand electrostatic interactions of a bifunctional ligand, aminoethyl phosphonic acid (AEP), are tuned with the pH of the dispersion. The key to colloidal stability is electrostatic stabilization of the monolayer. This work demonstrates a means of mimicking the stabilizing power of a thiolate-bound ligand with a zwitterionic tail group, but without the thiolate binding group.     

硫脲修饰法制备高发光性能CdTe量子点

通过巯基水解制备了具有优异荧光特性的碲化镉量子点. 详细研究前驱体镉离子与巯基丙酸(MPA)摩尔比、镉离子浓度等制备条件对大尺寸、高量子产率的亲水性碲化镉量子点光学性能的影响. 在不同的水热生长时间下, 可制备出荧光发射峰位于485-660 nm范围内的不同尺寸的碲化镉水溶性量子点, 荧光发射峰半高宽控制在40-75 nm之间, 量子点的最高量子产率(QY)达到了45%. 并利用硫脲缓慢水解和光解释放自由硫离子, 修饰碲化镉表面, 检测修饰后的量子点在12天内光学性能的变化情况. 通过考察硫脲用量对量子点修饰效果, 发现当n(CdTe)/n(thiourea)=1:4(量子点浓度以镉离子浓度计)时, 硫脲对发射峰为505 nm的碲化镉量子点修饰效果最为理想, 量子点荧光强度加强了5倍, 量子产率达到68.3%.     

Multifunctional compact zwitterionic ligands for preparing robust biocompatible semiconductor quantum dots and gold nanoparticles

We describe the synthesis of a series of four different ligands which are used to prepare hydrophilic, biocompatible luminescent quantum dots (QDs) and gold nanoparticles (AuNPs). Overall, the ligands are designed to be compact while still imparting a zwitterionic character to the NPs. Ligands are synthesized appended to a bidentate dihydrolipoic acid- (DHLA) anchor group, allowing for high-affinity NP attachment, and simultaneously incorporate tertiary amines along with carboxyl and/or hydroxyl groups. These are placed in close proximity within the ligand structure and their capacity for joint ionization imparts the requisite zwitterionic nature to the nanocrystal. QDs functionalized with the four different compact ligands were subjected to extensive physical characterization including surface charge, wettability, hydrodynamic size, and tolerance to a wide pH range or high salt concentration over time. The utility of the compact ligand coated QDs was further examined by testing of direct conjugation to polyhistidine-appended protein and peptides, aqueous covalent-coupling chemistry, and the ability to engage in F?rster resonance energy transfer (FRET). Conjugating cell penetrating peptides to the compact ligand coated QD series facilitated their rapid and efficient cellular uptake, while subsequent cytotoxicity tests showed no apparent decreases in cell viability. In vivo biocompatibility was also demonstrated by microinjecting the compact ligand coated QDs into cells and monitoring their stability over time. Inherent benefits of the ligand design could be extended beyond QDs as AuNPs functionalized with the same compact ligand series showed similar colloidal properties. The strong potential of these ligands to expand NP capabilities in many biological applications is highlighted.     

Enhancing the stability and biological functionalities of quantum dots via compact multifunctional ligands

We have designed and synthesized a series of modular ligands based on poly(ethylene glycol) (PEG) coupled with functional terminal groups to promote water-solubility and biocompatibility of quantum dots (QDs). Each ligand is comprised of three modules: a PEG single chain to promote hydrophilicity, a dihydrolipoic acid (DHLA) unit connected to one end of the PEG chain for strong anchoring onto the QD surface, and a potential biological functional group (biotin, carboxyl, and amine) at the other end of the PEG. Water-soluble QDs capped with these functional ligands were prepared via cap exchange with the native hydrophobic caps. Homogeneous QD solutions that are stable over extended periods of time and over a broad pH range were prepared. Surface binding assays and cellular internalization and imaging showed that QDs capped with DHLA-PEG-biotin strongly interacted with either NeutrAvidin immobilized on surfaces or streptavidin coupled to proteins which were subsequently taken up by live cells. EDC coupling in aqueous buffer solutions was also demonstrated using resonance energy transfer between DHLA-PEG-COOH-functionalized QDs and an amine-terminated dye. The new functional surface ligands described here provide not only stable and highly water-soluble QDs but also simple and easy access to various biological entities.     

Surface Chemistry Studies of Quantum Dots (QDs) Modified with Surfactants

Since luminescent CdSe quantum dots (QDs) have shown great potential in biological labeling, the surface chemistry behavior of QDs at interfaces is of great research interest. In the present study, CdSe QDs with green luminescence were modified with hydrophobic chains of varying lengths [from C6 to C18]. These modified QDs can be utilized to form stable monolayers at the air/water interface. Surface pressure-area isotherms of modified QDs have been measured and limiting molecular areas have also been extrapolated in order to analyze the size of the QDs. UV absorption spectra of modified QDs at various surface pressures were also determined. Surface chemistry, as well as the topographic properties, of modified QDs in Langmuir and L-B films was discussed.