Nitration of Aromatic Compounds Catalyzed by Divanadium-Substituted Molybdophosphoric Acid,H<Subscript>5</Subscript>[PMo<Subscript>10</Subscript>V<Subscript>2</Subscript>O<Subscript>40</Subscript>]

Summary. The nitration of aromatic compounds was carried out in the presence of divanadium-substituted molybdophosphoric acid, H₅PMo₁₀V₂O₄₀, as catalyst and a mixture of nitric acid and acetic anhydride as nitrating agent. In the presence of this heteropolyacid the ortho- and para-nitro compounds were obtained in good to excellent yields under mild reaction conditions.     

Theoretical study on H2 elimination pathways of silylenoid H2SiLiF with CH4, NH3, H2O, HF, SiH4, PH3, H2S, and HCl

Ab initio molecular orbital calculations have been performed to explore the reaction potential energy surfaces of silylenoid H₂SiLiF with XH _n hydrides, where XH _n = CH₄, NH₃, H₂O, HF, SiH₄, PH₃, H₂S, and HCl. We have identified a previously unreported reaction pathway on each reaction surface, H₂SiLiF + H-XH _{n − 1} → H _n XSiLiF + H₂, which involves H₂ elimination following the initial formation of an association complex via a four-membered ring transition state to form the substituted three-membered ring silylenoid H _n XSiLiF and a H₂ molecule. This theoretical calculations suggest that (i) for H₂ eliminations there is a very clear trend toward lower activation barriers and more exothermic interactions on going from left to right along a given row in periodic table, and (ii) for the second-row hydrides, the H₂ elimination reactions are less exothermic than for the first-row hydrides and the reaction barriers are lower for X–S and Cl. Compared to the insertions of H₂SiLiF into XH _n , the H₂ elimination pathways should be unfavorable with higher barrier and lower exothermic.     

Influence of the texture of chromia catalysts on their activity in synthesis of 2-methylthiophene

The texture of Cr₂O₃-K₂O/Al₂O₃catalysts containing oxides of rare earth elements (REE) was studied. The catalysts are used for the synthesis of 2-methylthiophene by the reaction of H₂S with n-pentane or piperilene. The heterocyclization of n-pentane is a consecutive reaction involving a step of dehydrogenation of initial hydrocarbon. At this step the texture of the catalyst affects the yield of 2-methylthiophene. The yield of 2-methylthiophene obtained from piperilene and I₂S is independent of the catalyst texture.     

Synthesis,characterization and luminescence of the tetranuclear gold cluster: [Au4{7,8-(PPh2)2-7,8-C2B9H10}2(PPh3)2]

A tetranuclear gold cluster has been synthesized by the reaction of [Au(PPh₃)NO₃] with the closo carborane diphosphine 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ in THF, and characterized by elemental analysis, FT-IR, ¹H and ¹³C?NMR spectroscopy and X-ray structure determination. The cluster crystallizes in the triclinic Pī, a?=?15.118(8)?Å, b?=?16.057(9)?Å, c?=?24.284(13)?Å, α?=?80.822(9)°, β?=?79.624(8)°, γ?=?81.938(8)°, Z?=?2, R ₁?=?0.0626, wR ₂?=?0.1894. A single crystal structure determination showed that four gold atoms form a tetrahedral framework. Among these four gold atoms, two were chelated by two nido carborane diphosphine [7,8-(PPh₂)₂-7,8-C₂B₉H₁₀]^? anions coming from the degradation of the initial closo ligand 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀, while the other two were ligated to two PPh₃ groups. The luminescence of this cluster was also investigated in dichloromethane solution at room temperature.     

The reaction of MgCl2·4H2O with CCl2F2

A new reaction of MgCl₂·4H₂O with CCl₂F₂ is investigated by DTA and TG from room temperature to 350 °C. It is observed that MgF₂ was obtained between 252 and 350 °C, Below the temperature, MgCl₂·4H₂O dehydrates and hydrolyzes to MgCl₂ and Mg(OH)Cl, which are the real reactants of the reaction with CCl₂F₂. The formation of MgF₂ is ascribed to the reaction of MgCl₂ and Mg(OH)Cl with HF, which forms by decomposition of CCl₂F₂ with the taking part in of H₂O released from dehydration of hydrated magnesium chloride on the surface of MgCl₂ and Mg(OH)Cl, which catalyzes the decomposition of CCl₂F₂ in this case. Consequently, the reactions are tested in the fluid-bed condition. It is found that MgF₂ formed at temperatures down to 200 °C in a fluid-bed reactor. This reaction may be used as a method of disposing of the environmentally sensitive CCl₂F₂ (rather than release into the atmosphere). It is also a method for the preparation of MgF₂.     

CrOx-CeO2二元氧化物表面NO的NH3催化还原反应机理

利用原位漫反射红外光谱法研究了473 K下在CrOx-CeO₂二元氧化物表面NO的NH₃催化还原反应的机理。研究了CrO-CeO₂二元氧化物表面在反应过程中的表面吸附物种。为了更加清晰的了解反应过程, 在SCR反应过程中分别切断NH₃和NO的气流, 并采集了所生成的原位漫反射红外光谱图, 通过研究以上结果得出结论:当前状态下的SCR反应过程可能服从E-R机理。     

CrOx-CeO2二元氧化物表面NO的NH3催化还原反应机理

利用原位漫反射红外光谱法研究了473 K下在CrOx-CeO2二元氧化物表面NO的NH3催化还原反应的机理。研究了CrOx-CeO2二元氧化物表面在反应过程中的表面吸附物种。为了更加清晰的了解反应过程,在SCR反应过程中分别切断NH3和NO的气流,并采集了所生成的原位漫反射红外光谱图,通过研究以上结果得出结论:当前状态下的SCR反应过程可能服从ER机理。     

Oxidation of Thiols Using K 2 S 2 O 8 in Ionic Liquid

A green, straightforward, and novel method for oxidation of thiols to the corresponding disulfides is reported using K ₂ S ₂ O₈ in the ionic liquid 1-butyl-3-methylimidazolium bromide [(bmim)Br] at 65–70°C. The corresponding disulfides were obtained in excellent yield and short reaction time.     

TMSCl/Fe(NO3)3-Catalyzed Synthesis of 2-Arylbenzothiazoles and 2-Arylbenzimidazoles Under Ultrasonic Irradiation

A convenient one-pot cyclocondensation method for benzothiazole and benzimidazole syntheses is described. A set of benzothiazoles and benzimidazoles were readily prepared from aromatic ortho-diamines or ortho-aminothiophenol and aldehydes using chlorotrimethylsilane in dimethylformamide as promoter and water scavenger under ultrasonic irradiation in good yields (84–97%).     

Ce(SO4)2‐Mediated Nitration of N,N‐Dialkylanilines with NaNO2 in Water

Ce(SO₄)₂‐mediated nitration of N,N‐dialkylanilines with NaNO₂ using water as the solvent has been achieved in good to excellent yields. The nitrating reaction proceeded smoothly at ambient temperature.     

PbCu3(OH)(NO3)(SeO3)3·1/2H2O und Pb2Cu3O2(NO3)2(SeO3)2: Synthese und Kristallstrukturuntersuchung

Crystals of PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O [a=7.761(3)Å,b=9.478(4)Å,c=9.514(4)Å, =66.94(2)°, =69.83(2)°, =81.83(2)°, space group P ,Z=2] and Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ [a=5.884(2)Å,b=12.186(3)Å,c=19.371(4)Å, space group Cmc2₁,Z=4] were synthesized under hydrothermal conditions. Their crystal structures were refined with three-dimensional X-ray data toR _w=0.033 resp. 0.055. In PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O the Cu atoms are [4+1] and [4+2] coordinated and via SeO₃ groups a three-dimensional atomic arrangement is built up. In Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ there are sheets, which are connected only via Pb-O bonds ranging from 2.98 Å to 3.16 Å.

     

A three component one-pot synthesis of N-amino-2-pyridone derivatives catalyzed by KF-Al2O3

Synthesis of 1,6-diamino-4-phenyl-3,5-dicyano-2-pyridone derivatives via a one-pot, three-component reaction of aryl aldehydes, malononitrile, and cyanoacetic hydrazide at room temperature using KF-Al₂O₃ as a recyclable catalyst have been developed. The reaction proceeds through the initial Knoevenagel condensation between aldehyde and malononitrile in the presence of KF-Al₂O₃ to form the benzylidene derivative which then undergoes Michael addition with cyanoacetic hydrazide followed by intramolecular cyclization of the resulting intermediate to produce the N-amino-2-pyridones in good to excellent yields. The structure of the synthesized compounds were characterized and established on the basis of their spectral data analysis and single-crystal XRD analysis.     

Gas-phase phenyl acetate conversion on AlPO4, γ-Al2O3 and SiO2 catalysts

The conversion of phenyl acetate over AlPO₄ (Al/P=1), γ-Al₂O₃ and SiO₂ catalysts generated phenol, by deacetylation, ando-hydroxycetophenone, by Fries rearrangement, as the main reaction products. The activity for Fries rerrangement was in accordance with the acidity data measuredversus cyclohexene skeletal isomerization. Thus, AlPO₄ showed the highest activity. Moreover,o-hydroxy-acetophenone formation increased with the reaction temperature. Besides, in AlPO₄ catalysts 4-methylcoumarin and 2-methylchromone were also found, although in low amounts.     

Oxidation of Sulfides with Hydrogen Peroxide Catalyzed by Vitamin B2 Derivatives

5-Ethyl-3-methyl-2′,4′:3′,5′-di-O-methylenedioxyriboflavinium perchlorate (1, DMRFlEt⁺ClO₄ ^–), derived readily from commercially available vitamin B₂ (riboflavin), exhibits high catalytic activity for the oxidation of organic sulfides with hydrogen peroxide. The reaction provides an efficient and selective method for the oxidative transformation of organic sulfides to the corresponding sulfoxides under mild conditions.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource: Full experimental and spectral details.]     

Crystal structure of Li2Cu3(SeO3)2(SeO4)2

Summary Single crystal X-ray data of the hydrothermally grown new phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ were measured with a four-circle diffractometer up to sin /=0.81 Å^–1 [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, = 94.21(1)°]. The structure was determined by direct and Fourier methods and refined toR=0.034,R _w =0.027 for 2 086 independent reflections.Cu(1)^[4+1]O₅ forms a tetragonal pyramid, Cu(2)^{[4 + 2]}O₆ is a strongly elongated octahedron. The Li atom is surrounded by four O atoms forming a distorted tetrahedron. Se(IV)O₃ and Se(VI)O₄ groups are in accordance to literature, mean Se-O bond lengths are 1.714 and 1.644 Å.

---

Die Kristallstruktur von Li₂Cu₃(SeO₃)₂(SeO₄)₂

Zusammenfassung Einkristall-Röntgendaten der hydrothermal gezüchteten neuen Phase Li₂Cu₃(SeO₃)₂(SeO₄)₂ wurden mit einem Vierkreisdiffraktometer im Bereich bis zu sin /=0.81 Å^–1 gemessen [I2/a,Z=4,V=1175.5 ų,a=16.293(6),b=5.007(2),c=14.448(6) Å, =94.21(1)°]. Die Kristallstruktur wurde mittels direkter und Fourier-Methoden bestimmt und für 2 086 unabhängige Reflexe zuR=0.034,R _w =0.027 verfeinert.Cu(1)^[4+1]O₅ bildet eine tetragonale Pyramide, Cu(2)^[4+2]O₆ ist ein stark verlängertes Oktaeder. Das Li-Atom ist von vier O-Atomen in Gestalt eines verzerrten Tetraeders umgeben. Die Se(IV)O₃-und Se(VI)O₄-Gruppen entsprechen der Literatur, die mittleren Se-O-Abstände betragen 1.714 und 1.644 Å.

     

Facile one-pot synthesis of 2-arylbenzothiazoles catalyzed by H3PO4/TiO2-ZrO2 (1/1) under solvent-free conditions

A highly efficient and simple protocol for the preparation of 2-arylbenzothiazoles through condensation of 2-aminothiophenol and different aldehydes in the presence of H₃PO₄/TiO₂-ZrO₂(1/1)-cetyl pyridinium bromide (CPB) is described. The reaction proceeded under mild and solvent-free conditions to afford 2-arylbenzothiazole derivatives. In this method, the title compounds were obtained in good to excellent yields and short reaction times. The structures of synthesized products were identified by infrared, ¹H NMR, ¹³C NMR, and mass spectroscopy.     

Cp2TiCl2 catalyzed one-pot synthesis of n-Bu3GeH from GeCl4

The reaction of GeCl₄ with n-BuMgCl in presence of a catalytic amount of Cp₂TiCl₂ gives n-Bu₃GeH and n-Bu₄Ge in ca. 70 and 25% yield, respectively. This method provides an industrially feasible one-pot synthesis for Bu₃GeH and Bu₄Ge. The reaction temperature and stoichiometry seem to be important in the distribution of the products. Apart from elemental analysis these compounds have been characterized by comparing their boiling points, NMR spectral data and GC assay with that of the authentic samples.     

Die Kristallstruktur von Dikalium-trikobalt(II)-dihydroxid-trisulfat-dihydrat,K2Co3(OH)2(SO4)3·2H2O

Crystals of K₂Co₃(OH)₂(SO₄)₃·2H₂O were synthesized under hydrothermal conditions. The crystal structure [a=17.945 (4) Å,b=7.557 (2) Å,c=9.760 (3) Å, space group Cmc2₁,Z=4] was determined by direct methods and refined with single crystal X-ray data. The H atoms were located byFourier syntheses. Their structural parameters were refined, too. The finalR-values areR=0.025 andR _w =0.028 (w=1/) for 612 reflections withF ₀>3 (F ₀). Both Co(II) atoms are octahedral six coordinated and form zigzag chains running parallel [001]. These chains are connected via sulfate groups to built up sheets parallel (100). The KO₉ polyhedron and one of the four hydrogen bonds link these sheets.

     

合成方法对Rh/CeO2-ZrO2-La2O3催化剂的结构、表面性能及DeNOx活性的影响

用沉积沉淀法合成两种不同系列的CeO2-ZrO2-La2O3混合氧化物(ZrO2和La2O3沉积CeO2粒子(标记为A-x)以及CeO2和La2O3沉积ZrO2粒子(标记为B-x)),并用作Rh催化剂的载体。XRD、拉曼、TPR、XPS和O2脉冲等表征结果显示出不同的沉积顺序将导致不同的结构和氧化还原性能,且B-x具有更高的氧迁移性、储氧能力和表面Ce浓度。当其负载Rh后,Rh/B-x催化剂具有更高的NO和CO转化率及N2选择性,且Ce的最佳含量为50at%。这可能归因于Rh负载于富铈表面形成更多有利于NO分解的表面Ce3+活性位。     

2-Azetidinones from 3-aminopropanoic acids and thePh 3P/CCl4(CBr4) orPh 3P/Br2(I2) condensation systems

The title complexes are used as intramolecular cyclization agents to yield under mild conditions and average to good yields 2-azetidinones from variously substituted 3-aminopropanoic acids. The reaction is found to proceed in all examined cases stereospecifically, with one exception. No marked difference with respect to yields and stereospecificity is noted among the four condensation systems.

---

2-Azetidinone aus 3-Aminopropansäuren und Ph₃ P/CCl ₄(CBr ₄) oder Ph₃ P/Br ₂(I ₂) als Kondensationsmittel

Zusammenfassung Die im Titel angegebenen Systeme wurden als Cyclisationsreagentien eingesetzt, um aus substituierten 3-Aminopropansäuren 2-Azetidinone unter milden Bedingungen und mit durchschnittlichen bis guten Ausbeuten darzustellen. Mit einer Ausnahme läuft die Reaktion stereospezifisch. Bei den vier untersuchten Systemen wurde kein beträchtlicher Unterschied in bezug auf Ausbeute und Stereospezifität festgestellt.