ORGANIC CHELATING REAGENT ON REDOX ADSORPTION OF ACTIVATED CARBON FIBER TOWARDS Au~(3+)

1. INTRODUCTION Activated carbon fibers (ACF) are a comparatively modern form of porous carbon materials with a number of significant advantages over the traditional powder or granular forms. These include high surface area and adsorption capacity, as we…     

用含偕胺肟基螯合纤维吸附、还原Au^3＋的研究（Ⅱ）：—氧化还原过程的初步研究

讨论了含偕胺肟基螯合纤维对Au^3 的还原过程及螯合与还原反应间的关系。结果表明，含偕胺肟基螯合纤维在吸附Au^3 的过程中，功能基螯合Au^3 之后再将其部分还原成单质金，而偕胺肟基则先被氧化成酰氨基进而变成羧基，吸附了Au^3 的纤维经径高温灼烧后合理使可得到海绵金。     

分离、富集液相中金离子的反应型材料

介绍了近年来国内外以化学吸附纤维(离子交换和螯合纤维)、活性炭纤维和树脂等有机功能材料为基础研究开发分离、富集液相中金离子(Au3 和Au )的研究进展,其中包括含N、O、S等各种官能团有机功能纤维和树脂、活性炭纤维对液相中金离子吸附的实验理论研究、预富集分析测试和实际湿法冶金中的应用,对于不同吸附材料对金离子的吸附行为、吸附机理、影响因素等进行了初步探讨。指出了反应型材料的优势和目前所存在的问题,对其应用前景作了适当展望。     

几种植物基活性炭材料的表面结构与吸附性能比较——(II)表面化学结构与吸附性能研究

用X-射线光电子能谱对3种植物基活性炭材料:椰壳活性炭 (CAC4)、剑麻茎基活性炭(SSAC)和剑麻基活性碳纤维 (SACF) 的表面化学结构进行了表征,并研究和对比了它们的吸附性能,包括对碘、苯酚和亚甲基蓝的液相吸附性能,对有机蒸汽的吸附性能以及对Au3+的还原吸附性能等。结果表明,3个样品表面均含有多种含氧官能团,吸附能力SACF>SSAC> CAC4。样品的吸附性能主要取决于自身孔结构,与其表面化学结构也有密切的关系。     

硫代酰胺基螯合纤维的合成及其吸附性能研究

以腈纶纤维(PAN)为起始原料,分别经水合肼、乙二胺、二乙烯三胺预交联后,以N,N-二甲基甲酰胺(DMF)作溶剂与硫化钠反应,合成了3种携硫代酰胺功能基可达6.8mmol/g·干纤维的螯合功能纤维。利用红外光谱、元素分析、热稳定分析、重量分析等对该螯合纤维的结构、性能等进行了表征;研究了该螯合纤维对Au3 ,Ag ,Pd2 等贵金属离子的吸附性能;考察了温度、pH、硫含量等对纤维吸附Ag 离子的影响。结果表明,纤维对Au3 ,Ag 等贵金属离子具有良好的吸附性能,对Au3 的吸附容量为800mg/g·干纤维;对Ag 离子的吸附容量可达1510mg/g·干纤维,并具有良好的吸附动力学特性,该螯合纤维可用于混合溶液中Ag(I)离子的吸附分离。     

氧化还原功能纤维的研究──Ⅴ．含胺基及乙二胺基功能纤维的合成及其对Au~（3＋）的吸附性能

本文以反应性氯甲基化纤维为基体，合成丁氮含量分别为４．０６、４．９２ｍｍｏｌ／ｇ的含胺基（－ＮＨ２）及乙二胺基（－ＮＨＣ２Ｈ４ＮＨ２）功能纤维．静态吸附实验结果表明：在ｐＨ２．０乙二胺基纤维对Ａｕ３＋的吸附量达最大（６２０ｍｇ／ｇ），含胺基纤维的吸附量为２４８ｍｇ／ｇ；ＷＡＸＤ证实它们对Ａｕ３＋都有还原作用；含乙二胺基纤维对吸附态Ａｕ３＋的还原百分率最大值为９１％（ｐＨ４．０），而含胺基纤维在ｐＨ２．０的还原百分率为１００％，但ｐＨ＜０．６后，含乙二胺基纤维对Ａｕ３＋无还原作用；含乙二胺基纤维对Ａｕ３＋的吸附量随溶液温度升高而增大；在乙醇、１、４－氧六环、乙酸乙酯中含乙二胺基纤维对Ａｕ３＋的吸附量分别为４２、１４３、０ｍｇ／ｇ，且在乙醇中它对Ａｕ３＋有还原作用．吸附动力学实验结果表明：吸附初期为快速离子交换过程，中期为螯合吸附占主导地位，后期则是氧化还原吸附占优势．在扫描电子显微镜可观察到部分吸附在含乙二胺基纤维上的金聚集成粒状．     

Application of an imidazoline group-containing chelating fiber for the determination of trace noble metals in superhigh-temperature alloys

An imidazoline group-containing chelating fiber was prepared by means of the reaction of nitrile groups with ethylenediamine in an hydrazine-modified polyacrylonitrile fiber. The adsorption properties of the chelating fiber for Au(III), Pd(II), Pt(IV), Ir(IV), Os(IV), Rh(III) and Ru(IV) ions, such as binding capacity, distribution coefficient, sorptive rate and quantitative elution of Au(III), Pd(II) and Pt(IV) ions were investigated. The imidazoline group-containing chelating fiber possessed high binding capacities and good adsorption kinetic properties, exhibited high affinity for noble metals in 0.1-1.0 mol/L HCl and could be efficiently re-used. After the separation of trace Au(III), Pd(II) and Pt(IV) ions from a matrix using the chelating fiber, these ions could be determined by ICP-AES with satisfactory results, and the relative standard deviation for Au(III), Pd(II) and Pt(IV) ions was less than 6%.     

Application of an imidazoline group-containing chelating fiber for the determination of trace noble metals in superhigh-temperature alloys

An imidazoline group-containing chelating fiber was prepared by means of the reaction of nitrile groups with ethylenediamine in an hydrazine-modified polyacrylonitrile fiber. The adsorption properties of the chelating fiber for Au(III), Pd(II), Pt(IV), Ir(IV), Os(IV), Rh(III) and Ru(IV) ions, such as binding capacity, distribution coefficient, sorptive rate and quantitative elution of Au(III), Pd(II) and Pt(IV) ions were investigated. The imidazoline group-containing chelating fiber possessed high binding capacities and good adsorption kinetic properties, exhibited high affinity for noble metals in 0.1–1.0 mol/L HCl and could be efficiently re-used. After the separation of trace Au(III), Pd(II) and Pt(IV) ions from a matrix using the chelating fiber, these ions could be determined by ICP-AES with satisfactory results, and the relative standard deviation for Au(III), Pd(II) and Pt(IV) ions was less than 6%. Received: 5 July 1999 / Revised: 4 October 1999 / Accepted: 4 October 1999     

化学-X-射线荧光光谱法测定地质样品中的痕量稀土元素

本文采用对氯偶氮氯膦(CPA—PCL)为螯合剂,VS-Ⅱ型强碱性阴离子交换纤维为载体,以先吸着后螯合方式对稀土元素与基体元素进行分离与富集,并经酸溶制备成溶液,采用溶液进样法直接由X射线荧光光谱法(XRFS)测定15个稀土元素。该法具有简便、整合剂用量少、基体效应小的特点,精密度、准确度及检测限均能满足地质样品分析要求,取得满意结果。     

Synthesis of Polyacrylaminothiourea Chelating Fiber and Properties of Concentration and Separation of Trace Noble Metal Ions from Samples

A novel polyacrylaminothiourea chelating fiber was synthesized simply and rapidly from nitrilon (an acrylonitrile-based synthetic fiber), which was applied to preconcentrate and separate of trace amount of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ） and Ir (Ⅳ） ions from solution of samples.The analyzed ions can be quantitatively concentrated by the fiber up to a flow rate of 20.0mL/min at pH2, and can also be desorbed with 15 mL of 4mol/L HCl 3% thiourea from the fiber column with recoveries of 96.5%-100%.The chelating fiber can be reused for ten times,the recoveries of these ions are still over 92%,and hundred to thousand times of excess of Fe(Ⅲ）,Al（Ⅲ）,Ca(Ⅱ），Mg（Ⅱ）,Ni(Ⅱ）,Mn（Ⅱ),Cu(Ⅱ），Zn(Ⅱ），and Cd(Ⅱ） cause no interference on the determination of the analyzed ions by inductively-coupled plasma atomic emission spectrometry (ICP-AES).The static saturation adsorption capacities of the fiber for the analytes are in the range of 1.15-2.80mmol/g.The relative standard deviations for the determination of 20.0ng/mL each of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ）and Ir(Ⅳ） are in the range of 0.7%-3.0%.The recoveries for test from standard additions to real solution samples are between 96% and 100%.The concentration of each ion in powder sample detected by the method is in good agreement with the certified value.     

含偕胺肟基螯合纤维的制备及结构和性能的研究

通过羟胺与聚丙烯腈的反应制得含偕胺肟基螯合纤维,当腈基转化率为53.7％时,纤维对Au~(3+)的吸附量达626.7mg/g.对反应条件、纤维结构和性能相互关系的研究表明,聚丙烯腈的超分子结构致密性及序态越低越有利于反应;处理过程中,纤维蕴晶区在70℃时开始融化;纤维中偕胺肟基含量随羟胺浓度提高或反应时间延长而提高到一定值后变化趋于平缓,当反应温度高于70℃时,随反应温度升高而提高;纤维断裂强度随反应时间延长而下降;当反应温度高于70℃时明显下降。为获得偕胺肟基含量高、力学性能良好的纤维,聚丙烯腈纤维的偕胺肟化反应宜在略低于70℃的温度下以较短时间进行.     

螯合树脂研究——Ⅴ.巯基胺型螯合树脂的合成其吸附性能

本工作探索了一种合成巯基胺型螯合树脂的新方法.用环硫氯丙烷与多乙烯多胺作用只经一步反应,即可制得交联型巯基胺树脂,树脂中的配位原子氮和硫的含量较高,对贵金属离子金、银、钯具有良好的吸附性能.     

ADSORPTION OF UO2 2+ BY POLYETHYLENE HOLLOW FIBER MEMBRANE WITH AMIDOXIME GROUP

The polyethylene (PE) membrane was prepared by the radiation-induced grafting of acrylonitrile (AN) onto PE hollow fiber and by the subsequent amidoximation of cyano groups in poly-AN graft chains. The adsorption characteristics of the chelating hollow fiber membrane was examined as the solution of UO₂ ²⁺ permeated across the chelating hollow fiber membrane. The inner and outer diameter increased with an increasing grafting yield, whereas, the pure water flux and pore diameter decreased with an increasing grafting yield. The adsorption of UO₂ ²⁺ by the chelating hollow fiber membranes increased with an increasing amidoxime group. The adsorbed amount of UO₂ ²⁺ in the uranyl acetate solution was higher than that in the uranyl nitrate solution. The adsorbed amount of UO₂ ²⁺ is higher than that of Cu²⁺ when the solution of UO₂ ²⁺ and Cu²⁺ permeated across the chelating membrane, respectively. The adsorption characteristics of UO₂ ²⁺ by the amidoxime group-chelating fiber membrane in the presence of Na¹⁺ and Ca²⁺ showed a high selectivity for UO₂ ²⁺ even though there was a high concen-tration of Na¹⁺ and Ca²⁺ in the inlet solution.     

Reduction of Iron(III) Ion by Activated Carbon Fiber

The mechanisms of adsorption of iron(II) ion, iron(III) ion, and reduced iron(III) ion onto an activated carbon fiber and the ability of carbon fibers to reduce iron(III) ion were investigated on the basis of the amounts of iron ion adsorbed. The amount of iron(II) ion adsorbed onto the activated carbon fiber increased with increasing adsorption temperature. Iron(II) ion was more easily removed by the activated carbon fiber than iron(III) ion. Iron(III) ion was adsorbed onto the activated carbon fiber after being reduced to iron(II) ion. The reduction ability of A-20 was stronger than that of A-10 because the hydrophilic groups of A-20 were larger than those of A-10. It is concluded that the activated carbon fiber has a reduction effect on iron(III) ion and that the reduction effect of the activated carbon fiber depended on the number of hydrophilic groups on the activated carbon fiber. Copyright 2000 Academic Press.     

Synthesis and applications of poly(acryl<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonamideamidine-<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonylamide) chelating fiber for pre-concentrating and separating trace Bi(III), Hg(III), Au(III) and Pd(IV) from solution samples

Poly(acrylp-aminobenzenesulfonamideamidine-p-aminobenzenesulfonylamide) chelating fiber containing "S", "N", and "O" elements was synthesized from polyacrylonitrile fiber and p-aminobenzene sulfonamide and used to enrich and separate trace Bi(III), Hg(III), Au(III), and Pd(IV) ions from wastewater and ore sample solution. The enrichment acidity, flow rate, elution conditions, reuse, interference ions, saturated adsorption capacity, constant of adsorption rate, analytical accuracy, and actual samples on chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry (ICP-OES) with satisfactory results. Solutions of 100 ng mL^–1 of Bi(III), Hg(III), Au(III), and Pd(IV) ions can be enriched quantitatively by this chelating fiber at a rate of 1.0 mL min^–1 at pH 4 and desorbed quantitatively with 20 mL of 0.25 M HCl and 2% CS(NH₂)₂ solution at 50 °C (with recovery 97%). When the chelating fiber was reused for 20 times, the recoveries of the analyzed ions enriched by the fiber were still over 95% (except for Hg(III)). One thousand-fold excesses of Mn²⁺, Ca²⁺, Zn²⁺, Mg²⁺, Fe³⁺, Cu²⁺, Ni²⁺, Al³⁺, and Ba²⁺ ions and thousands-fold excesses of Na⁺ and K⁺ cause little interference in the pre-concentration and determination of the analyzed ions. The saturated adsorption capacity of Bi(III), Hg(III), Au(III), and Pd(IV) was 4.850×10^–4, 3.235×10^–4, 2.807×10^–4, and 3.386×10^–4 mol g^–1, respectively. The constants of adsorption rate were 0.409 min^–1 for Bi, 0.122 min^–1 for Hg, 0.039 min^–1 for Au, and 0.080 min^–1 for Pd. The relative standard deviations (RSDs) for the enrichment and determination of 10 ng mL^–1 Bi(III), Hg(III), Au(III), and Pd(IV) were lower than 2.3%. The results obtained for these ions in actual samples by this method were basically in agreement with the given values with average errors of less than 1.0%. FT-IR spectra shows that the existence of –SO₂–Ar, –H₂N–Ar, O=C–NH–, HN=C–NH–, and –HN–SO₂ functional groups are verified in the chelating fiber. From the FT-IR spectroscopy, we can see that Hg(III), Au(III), and Pd(IV) are mainly combined with nitrogen and sulfur (or oxygen), and Bi(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelating complex.     

活性碳纤维对银离子还原吸附能力的改进

活性碳纤维不仅对有机物有高的吸附容量,对贵金属离子也具有强的还原吸附能力,可将Pd(Ⅱ）,Ag（Ⅰ）,Au（Ⅲ）等离子还原为金属单质。因而可用于提取矿液或加收废液中的贵金属。由此,提高或改善贵金属在活性碳纤维上的还原吸附容量或分布形成,显得非常重要。本文研究了活性碳纤维制备条件、表面氧化改性、以有负载有机物等对活性碳纤维还原能力的影响。结果表明,（1）制备条件对剑麻基活性碳纤维的还原能力有很大的影响。用H3PO4或ZnCl2活化的活性碳纤维对银离子具有更高的还原吸附容量,分别可达250和700mg/g,约为水蒸汽活化剑麻基活性碳纤维对银离子还原吸附容量的2倍和5倍。（2）过氧化氢、高锰酸钾、或硝酸等无机氧化剂对活性碳纤维进行表面改性,也能提高活性碳纤维的还原能力。结果表明,虽然改性活性碳纤维的比表面积和孔体积下降10-20%左右,但基表面含氧量及含氧基团的种类发生了改变。这些改性活性碳纤维对Ag(NH3)2^ 的还原吸附量大幅度提高,可达550mg/g以上。推断表面改性在活性碳纤维表面创造了更多有利于碱性条件下发生氧化还原的活性点。（3）在活性碳纤维表面负载适当的有机物如亚甲基蓝、苯胺或对硝基苯酚,也能显著提高活性碳纤维对Ag(NH3)2^ 的还原吸附能力。     

Efficiency and application of poly(acryldinitrophenylamidrazone-dinitroacrylphenylhydrazine) chelating fiber for pre-concentrating and separating trace Au(III), Ru(III), In(III), Bi(III), Zr(IV), V(V), Ga(III) and Ti(IV) from solution samples

Poly(acryldinitrophenylamidrazone-dinitroacrylphenylhydrazine) chelating fiber was synthesized from polyacrylonitrile fiber and used for enrichment and separation for traces of Au(III), Ru(III), In(III), Bi(III), Zr(IV), V(V), Ga(III) and Ti(IV) ions from solution samples. The acidity, rate, re-use, capacity and interference on the adsorption of ions on the chelating fiber as well as the conditions of desorption of these ions from the chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry. The results show that 10-100 ngml(-1) of Au(III), Ru(III), In(III), Bi(III), Zr(IV), V(V), Ga(III) and Ti(IV) ions can be quantitatively enriched by the chelating fiber at a 2 mlmin(-1) of flow rate in the range pH 4-5, and desorbed quantitatively with 20 ml of 5 M HCl for In(III), Bi(III), Zr(IV), V(V), Ga(III), Ti(IV) and 20 ml of 4 M HCl+2% CS(NH(2))(2) solution for Au(III), Ru(III) (with recovery>95%). 50- to 500- fold excesses of Fe(III), Al(III), Mg(II), Mn(II), Ca(II), Cu(II), Ni(II) ions cause little interference in the concentration and determination of analyzed ions. When the fiber was reused for 8 times, the recoveries of the above ions enriched by the fiber were still over 87%. The relative standard deviations (RSDs) for the enrichment and determination of 10 ngml(-1) Au, Ru, In, Bi, Ga and 1 ngml(-1) Zr, V, Ti were lower than 3.0%. The results obtained for these ions in real solution samples by this method were basically in agreement with the given values with average errors of less than 6.3%. FT-IR spectra show that existence of NNCNHNH, OCNHNH and NO(2) functional groups are verified in chelating fiber, and Au(III) or Ru(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelate complex.     

Electrosorption of uranium ions on activated carbon fibers

A study on the electrosorption of uranium (U(VI)) ions onto a porous activated carbon fiber was performed to treat lagoon sludge containing 100 mg/L uranium and high concentration of chemical salts composed 3.8% NaNO₃, 19.8% NH₄NO₃, 1.9% Ca(NO₃)₂. The applied negative potential increased the adsorption kinetics and capacity in comparison to the open-circuit potential adsorption for uranium ions. When applying potential at −0.9 V (vs. Ag/AgCl) and pH 4, above 99% of the uranium is selectively removed from the 100 mg/L influent by electrosorption, and the cumulative amount of uranium for 50 h is about 600 mg_uranium/g_ACF. The high selectivity of elctrosorption process for uranium was probably caused by the difference of charge density of cations. More than 99% of adsorbed uranium ions was desorbed at a potential of +1.2 V and pH 3. The electrosorption of uranium onto the porous activated carbon fiber electrode is due to an ion exchange type reaction between the uranium ions and surface acid groups on carbon surface. Cyclic electrosorption test consisting of adsorption and desorption step shows that the activated carbon fiber electrode is easily regenerated in situ, indicating it is a reversible process.     

金属螯合亲和膜吸附分离与纯化溶菌酶的研究(Ⅱ)──不同金属螯合亲和膜对溶菌酶的吸附性能

采用低温氧或氨等离子体法改性聚丙烯微孔膜,基于等离子体改性膜的活化、偶联及螯合过程的机理,制备了Fe³⁺,Ni²⁺,Cu²⁺和Zn²⁺等金属离子螯合亲和膜,并用于溶菌酶的吸-脱附实验.实验结果表明,Ni²⁺和Cu²⁺离子螯合亲和膜对溶菌酶具有较高的吸附量,螯合过程中采用氯化物盐溶液制得的膜对溶菌酶吸附量比采用硫酸盐溶液制得的膜的吸附量高.两种膜的重复吸-脱附性能相近,而Fe³⁺螯合亲和膜基本上不能用于重复吸-脱附实验.采用补充金属螯合离子,能部分恢复亲和膜对溶菌酶的吸附量,是实现亲和膜重复使用的有效方法.     

活性碳纤维的结构修饰及其吸附氙性能的研究

活性炭纤维对氙的吸附容量与其孔结构密切相关，为了提高活性炭纤维对氙气的吸附容量，本文分别用亚甲基蓝、对硝基苯酚等有机物，或氯化钠、碘等无机化合物填充的方法修饰活性炭纤维的孔结构；以及利用高锰酸钾或硝酸等氧化处理修饰活性炭纤维的表面化学性质，同时，利用低温氮等温吸附表征了这些改性活性炭纤维的孔结构，以及通过光电子能谱表征了改性活性炭纤维的表面化学结构，上述化合物充填或氧化改性活性炭纤维对氙的吸附性能的研究结果表明，适量化合物填充，或合适浓度硝酸对活性炭纤维的表面处理，可以有效地修饰活性炭纤维的孔结构或改变活性炭纤维表面对氙的亲和力。因而可有效地提高改性活性炭纤维对氙的吸附容量。