Radical-molecule reactions HCO/HOC + C2H2: mechanistic study

A detailed computational study is performed on the unknown radical-molecule reactions between HCO/HOC and acetylene (C2H2) at the CCSD(T)/6-311G(2d,p)//B3LYP/6-311G(d,p)+ZPVE, Gaussian-3//B3LYP/6-31G(d), and Gaussian-3//MP2(full)/6-31G(d) levels. For the HCO + C2H2 reaction, the most favorable pathway is direct C-addition forming the intermediate HC=CHCH=O followed by a 1,3-H-shift leading to H2C=CHC=O, which finally dissociates to the product C2H3 + CO. The overall reaction barrier is 13.8, 10.5, and 11.3 kcal/mol, respectively, at the three levels. The quasi-direct H-donation process to produce C2H3 + CO with barriers of 14.0, 14.1, and 14.1 kcal/mol is less competitive. Thus only at higher temperatures could the HCO + C2H2 reaction play a role. In contrast, the HOC + C2H2 reaction can barrierlessly generate C2H3 + CO via the quasi-direct H-donation mechanism proceeding via a prereactive complex with OH...C2 hydrogen bonding. This is suggestive of the potential importance of the HOC + C2H2 reaction in both combustion and interstellar processes. However, the direct C-addition channel is much less competitive. For both reactions, the possible formation of the intriguing interstellar molecules propadiene and propynal is also discussed. The present theoretical study represents the first attempt to probe the reaction mechanism between HOC and pi-systems. Future laboratory investigations on both reactions (particularly HOC + C2H2) are recommended.     

Direct evidence for nonadiabatic dynamics in atom+polyatom reactions: crossed-jet laser studies of F+D2O-->DF+OD

Quantum-state-resolved reactive-scattering dynamics of F+D(2)O-->DF+OD have been studied at E(c.m.)=5(1) kcal/mol in low-density crossed supersonic jets, exploiting pulsed discharge sources of F atom and laser-induced fluorescence to detect the nascent OD product under single-collision conditions. The product OD is formed exclusively in the v(OD)=0 state with only modest rotational excitation ( =0.50(1) kcal/mol), consistent with the relatively weak coupling of the 18.1(1) kcal/mol reaction exothermicity into "spectator" bond degrees of freedom. The majority of OD products [68(1)%] are found in the ground ((2)Pi(32) (+/-)) spin-orbit state, which adiabatically correlates with reaction over the lowest and only energetically accessible barrier (DeltaE( not equal) approximately 4 kcal/mol). However, 32(1)% of molecules are produced in the excited spin-orbit state ((2)Pi(12) (+/-)), although from a purely adiabatic perspective, this requires passage over a DeltaE( not equal) approximately 25 kcal/mol barrier energetically inaccessible at these collision energies. This provides unambiguous evidence for nonadiabatic surface hopping in F+D(2)O atom abstraction reactions, indicating that reactive-scattering dynamics even in simple atom+polyatom systems is not always isolated on the ground electronic surface. Additionally, the nascent OD rotational states are well fitted by a two-temperature Boltzmann distribution, suggesting correlated branching of the reaction products into the DF(v=2,3) vibrational manifold.     

Mechanisms of the reactions of W AND W+ with H2O: computational studies

The mechanism of the reactions of W and W(+) with the water molecule have been studied for several lower-lying electronic states of tungsten centers at the CCSD(T)/6-311G(d,p)+SDD and B3LYP/6-31G(d,p)+SDD levels of theory. It is shown that these reactions are essentially multistate processes, during which lower-lying electronic states of the systems cross several times. They start with the formation of initial prereaction M(H(2)O) complexes with M-H(2)O bonding energies of 9.6 and 48.2 kcal/mol for M = W and W(+), followed by insertion of the metal center into an O-H bond with 20.0 and 53.3 kcal/mol barriers for neutral and cationic systems, respectively. The overall process of M + H(2)O --> t-HM(OH) is calculated to be highly exothermic, 48.4 and 48.8 kcal/mol for M = W and W(+). From the HM(OH) intermediate the reaction may proceed via several different channels, among which the stepwise HM(OH) --> HMO + H --> (H)(2)MO and concerted HM(OH) --> (H)(2)MO pathways are more favorable and can compete (energetically) with each other. For the neutral system (M = W), the concerted process is the most favorable, whereas for the charged system (M = W(+)), the stepwise pathway is slightly more favorable. From the energetically most favorable intermediate (H)(2)MO the reactions proceed via H(2)-molecule formation with a 53.1 kcal/mol activation barrier for the neutral system. For the cationic system, H-H formation and dissociation is an almost barrierless process. The overall reaction of W and W(+) with the water molecule leading to H(2) + MO formation is found to be exothermic by 48.2 and 39.8 kcal/mol, respectively. In the gas phase with the collision-less conditions the reactions W((7)S) + H(2)O --> H(2) + WO((3)Sigma(+)), and W(+)((6)D) + H(2)O --> H(2) + WO(+)((4)Sigma(+)) are expected to proceed via a 10.4 and 5.1 kcal/mol overall energy barrier corresponding to the first O-H dissociation at the TS1. On the basis of these PESs, we predict kinetic rate constants for the reactions of W and W(+) with H(2)O.     

Ab initio study of the mechanism of the atmospheric reaction: NO2 + O3 --> NO3 + O2

The atmospheric reaction NO2 + O3 --> NO3 + O2 (1) has been investigated theoretically by using the MP2, G2, G2Q, QCISD, QCISD(T), CCSD(T), CASSCF, and CASPT2 methods with various basis sets. The results show that the reaction pathway can be divided in two different parts at the MP2 level of theory. At this level, the mechanism proceeds along two transition states (TS1 and TS2) separated by an intermediate, designated as A. However, when the single-reference higher correlated QCISD methodology has been employed, the minimum A and the transition state TS2 are not found on the hypersurface of potential energy, which confirms a direct reaction mechanism. Single-reference high correlated and multiconfigurational methods consistently predict the barrier height of reaction (1) to be within the range 2.5-6.1 kcal mol(-1), in reasonable agreement with experimental data. The calculated reaction enthalpy is -24.6 kcal mol(-1) and the reaction rate calculated at the highest CASPT2 level, of k = 6.9 x 10(-18) cm(3) molecule(-1) s(-1). Both results can be regarded also as accurate predictions of the methodology employed in this article.     

Hydroxyl radical reactions with adenine: reactant complexes, transition states, and product complexes

In order to address problems such as aging, cell death, and cancer, it is important to understand the mechanisms behind reactions causing DNA damage. One specific reaction implicated in DNA oxidative damage is hydroxyl free-radical attack on adenine (A) and other nucleic acid bases. The adenine reaction has been studied experimentally, but there are few theoretical results. In the present study, adenine dehydrogenation at various sites, and the potential-energy surfaces for these reactions, are investigated theoretically. Four reactant complexes [A···OH]* have been found, with binding energies relative to A+OH* of 32.8, 11.4, 10.7, and 10.1 kcal mol(-1). These four reactant complexes lead to six transition states, which in turn lie +4.3, -5.4, (-3.7 and +0.8), and (-2.3 and +0.8) kcal mol(-1) below A+OH*, respectively. Thus the lowest lying [A···OH]* complex faces the highest local barrier to formation of the product (A-H)*+H(2)O. Between the transition states and the products lie six product complexes. Adopting the same order as the reactant complexes, the product complexes [(A-H)···H(2)O]* lie at -10.9, -22.4, (-24.2 and -18.7), and (-20.5 and -17.5) kcal mol(-1), respectively, again relative to separated A+OH*. All six A+OH* → (A-H)*+H(2)O pathways are exothermic, by -0.3, -14.7, (-17.4 and -7.8), and (-13.7 and -7.8) kcal mol(-1), respectively. The transition state for dehydrogenation at N(6) lies at the lowest energy (-5.4 kcal mol(-1) relative to A+OH*), and thus reaction is likely to occur at this site. This theoretical prediction dovetails with the observed high reactivity of OH radicals with the NH(2) group of aromatic amines. However, the high barrier (37.1 kcal mol(-1)) for reaction at the C(8) site makes C(8) dehydrogenation unlikely. This last result is consistent with experimental observation of the imidazole ring opening upon OH radical addition to C(8). In addition, TD-DFT computed electronic transitions of the N(6) product around 420 nm confirm that this is the most likely site for hydrogen abstraction by hydroxyl radical.     

Ab initio rate constants from hyperspherical quantum scattering: application to H+C2H6 and H+CH3OH

The dynamics and kinetics of the abstraction reactions of H atoms with ethane and methanol have been studied using a quantum mechanical procedure. Bonds being broken and formed are treated with explicit hyperspherical quantum dynamics. The ab initio potential energy surfaces for these reactions have been developed from a minimal number of grid points (average of 48 points) and are given by analytical functionals. All the degrees of freedom except the breaking and forming bonds are optimized using the second order perturbation theory method with a correlation consistent polarized valence triple zeta basis set. Single point energies are calculated on the optimized geometries with the coupled cluster theory and the same basis set. The reaction of H with C2H6 is endothermic by 1.5 kcal/mol and has a vibrationally adiabatic barrier of 12 kcal/mol. The reaction of H with CH3OH presents two reactive channels: the methoxy and the hydroxymethyl channels. The former is endothermic by 0.24 kcal/mol and has a vibrationally adiabatic barrier of 13.29 kcal/mol, the latter reaction is exothermic by 7.87 kcal/mol and has a vibrationally adiabatic barrier of 8.56 kcal/mol. We report state-to-state and state-selected cross sections together with state-to-state rate constants for the title reactions. Thermal rate constants for these reactions exhibit large quantum tunneling effects when compared to conventional transition state theory results. For H+CH3OH, it is found that the CH2OH product is the dominant channel, and that the CH3O channel contributes just 2% at 500 K. For both reactions, rate constants are in good agreement with some measurements.     

Reaction of the i-C4H5 (CH2CCHCH2) radical with O2

The resonantly stabilized radical i-C(4)H(5) (CH(2)CCHCH(2)) is an important intermediate in the combustion of unsaturated hydrocarbons and is thought to be involved in the formation of polycyclic aromatic hydrocarbons through its reaction with acetylene (C(2)H(2)) to form benzene + H. This study uses quantum chemistry and statistical reaction rate theory to investigate the mechanism and kinetics of the i-C(4)H(5) + O(2) reaction as a function of temperature and pressure, and unlike most resonantly stabilized radicals we show that i-C(4)H(5) is consumed relatively rapidly by its reaction with molecular oxygen. O(2) addition occurs at the vinylic and allenic radical sites in i-C(4)H(5), with respective barriers of 0.9 and 4.9 kcal mol(-1). Addition to the allenic radical form produces an allenemethylperoxy radical adduct with only around 20 kcal mol(-1) excess vibrational energy. This adduct can isomerize to the ca. 14 kcal mol(-1) more stable 1,3-divinyl-2-peroxy radical via concerted and stepwise processes, both steps with barriers around 10 kcal mol(-1) below the entrance channel energy. Addition of O(2) to the vinylic radical site in i-C(4)H(5) directly forms the 1,3-divinyl-2-peroxy radical with a small barrier and around 36.8 kcal mol(-1) of excess energy. The 1,3-divinyl-2-peroxy radical isomerizes via ipso addition of the O(2) moiety followed by O atom insertion into the adjacent C-C bond. This process forms an unstable intermediate that ultimately dissociates to give the vinyl radical, formaldehyde, and CO. At higher temperatures formation of vinylacetylene + HO(2), the vinoxyl radical + ketene, and the 1,3-divinyl-2-oxyl radical + O paths have some importance. Because of the adiabatic transition states for O(2) addition, and significant reverse dissociation channels in the peroxy radical adducts, the i-C(4)H(5) + O(2) reaction proceeds to new products with rate constant of around 10(11) cm(3) mol(-1) s(-1) at typical combustion temperatures (1000-2000 K). For fuel-rich flames we show that the reaction of i-C(4)H(5) with O(2) is likely to be faster than that with C(2)H(2), bringing into question the importance of the i-C(4)H(5) + C(2)H(2) reaction in initiating ring formation in sooting flames.     

An ab initio study on the allene-isocyanic acid and ketene-vinylimine [2 + 2] cycloaddition reaction paths

The reaction paths of [2 + 2] cycloadditions of allene (H2C=C=CH2) to isocyanic acid (HN=C=O) and ketene (H2C=C=O) to vinylimine (H2C=C=NH), leading to all the possible 14 four-membered ring molecules, were investigated by the MP2/aug-cc-pVDZ method. In the two considered reactions, the 2-azetidinone (beta-lactam) ring compounds were predicted to be the most stable thermodynamically in the absence of an environment. Although 4-methylene-2-azetidinone is the most stable product of the ketene-vinylimine cycloaddition, its activation barrier is higher than that for 4-methylene-2-iminooxetane by ca. 6 kcal/mol. Therefore, the latter product can be obtained owing to kinetic control. The activation barriers in the allene-isocyanic acid reactions are quite high, 50-70 kcal/mol, whereas in the course of the ketene-vinylimine cycloaddition they are equal to ca. 30-55 kcal/mol. All the reactions studied were found to be concerted and mostly asynchronous. Simulation of the solvent environment (toluene, tetrahydrofuran, acetonitrile, and water) by using Tomasi's polarized continuum model with the integral equation formalism (IEF-PCM) method showed the allene-isocyanic reactions remained concerted, yet the activation barriers were somewhat higher than those in the gas phase, whereas the ketene-vinylimine reactions became stepwise. The larger the solvent dielectric constant, the lower the activation barriers found. The lowest-energy pathways in the gas phase and in solvent were confirmed by intrinsic reaction coordinate (IRC) calculations. The atoms in molecules (AIM) analysis of the electron density distribution in the transition-state (TS) structures allowed us to distinguish pericyclic from pseudopericyclic from nonplanar-pseudopericyclic types of reactions.     

Theoretical Study on the Dehydrogenation Reaction of H2S by VS+ (3∑-)

The dehydrogenation reaction of H2S by the 3∑- ground state of VS+: VS+ + H2S → VS2+ + H2 has been studied by using Density Functional Theory (DFT) at the B3LYP/DZVP level. It is found that the reaction proceeds along two possible pathways (A and B) yielding two isomer dehydrogenation products VS2+-1 (3B2) and VS2+-2 (3A1), respectively. For both pathways,the reaction has a two-step-reaction mechanism that involves the migration of two hydrogen atoms from S2 to V+, respectively. The migration of the second hydrogen via TS3 and that of the first via TS4 are the rate-determining steps for pathways A and B, respectively. The activation energy is 17.4 kcal/mol for pathway A and 22.8 kcal/mol for pathway B relative to the reactants. The calculated reaction heat of 9.9 kcal/mol indicates the endothermicity of pathway A and that of -11.9 kcal/mol suggests the exothermicity of pathway B.     

Ab Initio Study on the Mechanism of the Atmospheric Reaction OH+O3→HO2+O2

The atmospheric reaction (1) OH + O₃→HO₂ + O₂ was investigated theoretically by using MP2, QCISD, QCISD(T), and CCSD(T) methods with various basis sets. At the highest level of theory, namely, QCISD, the reaction is direct, with only one transition state between reactants and products. However, at the MP2 level, the reaction proceeds through a two‐step mechanism and shows two transition states, TS1 and TS2 , separated by an intermediate, Int . The different methodologies employed in this paper consistently predict the barrier height of reaction (1) to be within the range 2.16–5.11 kcal mol^?1, somewhat higher than the experimental value of 2.0 kcal mol^?1.     

O(3P) + CO2 collisions at hyperthermal energies: dynamics of nonreactive scattering, oxygen isotope exchange, and oxygen-atom abstraction

The dynamics of O((3)P) + CO(2) collisions at hyperthermal energies were investigated experimentally and theoretically. Crossed-molecular-beams experiments at = 98.8 kcal mol(-1) were performed with isotopically labeled (12)C(18)O(2) to distinguish products of nonreactive scattering from those of reactive scattering. The following product channels were observed: elastic and inelastic scattering ((16)O((3)P) + (12)C(18)O(2)), isotope exchange ((18)O + (16)O(12)C(18)O), and oxygen-atom abstraction ((18)O(16)O + (12)C(18)O). Stationary points on the two lowest triplet potential energy surfaces of the O((3)P) + CO(2) system were characterized at the CCSD(T)/aug-cc-pVTZ level of theory and by means of W4 theory, which represents an approximation to the relativistic basis set limit, full-configuration-interaction (FCI) energy. The calculations predict a planar CO(3)(C(2v), (3)A') intermediate that lies 16.3 kcal mol(-1) (W4 FCI excluding zero point energy) above reactants and is approached by a C(2v) transition state with energy 24.08 kcal mol(-1). Quasi-classical trajectory (QCT) calculations with collision energies in the range 23-150 kcal mol(-1) were performed at the B3LYP/6-311G(d) and BMK/6-311G(d) levels. Both reactive channels observed in the experiment were predicted by these calculations. In the isotope exchange reaction, the experimental center-of-mass (c.m.) angular distribution, T(θ(c.m.)), of the (16)O(12)C(18)O products peaked along the initial CO(2) direction (backward relative to the direction of the reagent O atoms), with a smaller isotropic component. The product translational energy distribution, P(E(T)), had a relatively low average of = 35 kcal mol(-1), indicating that the (16)O(12)C(18)O products were formed with substantial internal energy. The QCT calculations give c.m. P(E(T)) and T(θ(c.m.)) distributions and a relative product yield that agree qualitatively with the experimental results, and the trajectories indicate that exchange occurs through a short-lived CO(3)* intermediate. A low yield for the abstraction reaction was seen in both the experiment and the theory. Experimentally, a fast and weak (16)O(18)O product signal from an abstraction reaction was observed, which could only be detected in the forward direction. A small number of QCT trajectories leading to abstraction were observed to occur primarily via a transient CO(3) intermediate, albeit only at high collision energies (149 kcal mol(-1)). The oxygen isotope exchange mechanism for CO(2) in collisions with ground state O atoms is a newly discovered pathway through which oxygen isotopes may be cycled in the upper atmosphere, where O((3)P) atoms with hyperthermal translational energies can be generated by photodissociation of O(3) and O(2).     

Theoretical study of the reaction mechanism of HCN+ and CH4 of relevance to Titan's ion chemistry

Titan is the largest satellite of Saturn. In its atmosphere, CH4 is the most abundant neutral after nitrogen. In this paper, the complex doublet potential-energy surface related to the reaction between HCN+ and CH4 is investigated at the B3LYP/6-311G(d,p), CCSD(T)/6-311G++(3df,2pd)(single-point), and QCISD/6-311G(d,p) computational levels. A total of seven products are located on the PES. The initial association of HCN+ with CH4 is found to be a prereaction complex 1 (HCNHCH3(+)) without barrier. Starting from 1, the most feasible pathway is the direct H-abstraction process (the internal C-H bond dissociation) leading to the product P1 (HCNH++CH3). By C-C addition, prereaction complex 1 can form intermediate 2 (HNCHCH3(+)) and then lead to the product P2 (CH3CNH++H). The rate-controlling step of this process is only 25.6 kcal/mol. It makes the Path P2 (1) R --> 1 --> TS1/2 --> 2 --> TS2/P2 --> P2 another possible way for the reaction. P3 (HCNCH3(+) + H), P5 (cNCHCH2(+) + H2), and P6 (NCCH3(+) + H2) are exothermic products, but they have higher barriers (more than 40.0 kcal/mol); P4 (H + HCN + CH3(+)) and P7 (H + H2 + HCCNH+) are endothermic products. They should be discovered under different experimental or interstellar conditions. The present study may be helpful for investigating the analogous ion-molecule reaction in Titan's atmosphere.     

Thermal decomposition of ethanol. III. A computational study of the kinetics and mechanism for the CH3+C2H5OH reaction

The mechanism for the CH3+C2H5OH reaction has been investigated by the modified Gaussian-2 method based on the geometric parameters of the stationary points optimized at the B3LYP/6-311+G(d,p) level of theory. Five transition states have been identified for the production of CH4+CH3CHOH (TS1), CH4+CH3CH2O (TS2), CH4+CH2CH2OH (TS3), CH3OH+CH3CH2 (TS4), and CH3CH2OCH3+H (TS5) with the corresponding barriers 12.0, 13.2, 16.0, 44.7, and 49.9 kcal/mol, respectively. The predicted rate constants and branching ratios for the three lower-energy H-abstraction reactions were calculated using the conventional and variational transition state theory with quantum-mechanical tunneling corrections for the temperature range 300-3000 K. The predicted total rate constant, kt=8.36 x 10(-76) T(20.00) exp(5258/T) cm3 mol(-1) s(-1) (300-600 K) and 6.10 x 10(-25) T(4.10)exp(-4058/T) cm3 mol(-1) s(-1) (600-3000 K), agrees closely with existing experimental data in the temperature range 403-523 K. Similarly, the predicted rate constants for CH3+CH3CD2OH and CD3+C2H5OD are also in reasonable agreement with available low temperature kinetic data.     

Reaction mechanism of naphthyl radicals with molecular oxygen. 1. Theoretical study of the potential energy surface

Potential energy surfaces (PESs) of the reactions of 1- and 2-naphthyl radicals with molecular oxygen have been investigated at the G3(MP2,CC)//B3LYP/6-311G** level of theory. Both reactions are shown to be initiated by barrierless addition of O(2) to the respective radical sites of C(10)H(7). The end-on O(2) addition leading to 1- and 2-naphthylperoxy radicals exothermic by 45-46 kcal/mol is found to be more preferable thermodynamically than the side-on addition. At the subsequent reaction step, the chemically activated 1- and 2-C(10)H(7)OO adducts can eliminate an oxygen atom leading to the formation of 1- and 2-naphthoxy radical products, respectively, which in turn can undergo unimolecular decomposition producing indenyl radical + CO via the barriers of 57.8 and 48.3 kcal/mol and with total reaction endothermicities of 14.5 and 10.2 kcal/mol, respectively. Alternatively, the initial reaction adducts can feature an oxygen atom insertion into the attacked C(6) ring leading to bicyclic intermediates a10 and a10' (from 1-naphthyl + O(2)) or b10 and b10' (from 2-naphthyl + O(2)) composed from two fused six-member C(6) and seven-member C(6)O rings. Next, a10 and a10' are predicted to decompose to C(9)H(7) (indenyl) + CO(2), 1,2-C(10)H(6)O(2) (1,2-naphthoquinone) + H, and 1-C(9)H(7)O (1-benzopyranyl) + CO, whereas b10 and b10' would dissociate to C(9)H(7) (indenyl) + CO(2), 2-C(9)H(7)O (2-benzopyranyl) + CO, and 1,2-C(10)H(6)O(2) (1,2-naphthoquinone) + H. On the basis of this, the 1-naphthyl + O(2) reaction is concluded to form the following products (with the overall reaction energies given in parentheses): 1-naphthoxy + O (-15.5 kcal/mol), indenyl + CO(2) (-123.9 kcal/mol), 1-benzopyranyl + CO (-97.2 kcal/mol), and 1,2-naphthoquinone + H (-63.5 kcal/mol). The 2-naphthyl + O(2) reaction is predicted to produce 2-naphthoxy + O (-10.9 kcal/mol), indenyl + CO(2) (-123.7 kcal/mol), 2-benzopyranyl + CO (-90.7 kcal/mol), and 1,2-naphthoquinone + H (-63.2 kcal/mol). Simplified kinetic calculations using transition-state theory computed rate constants at the high-pressure limit indicate that the C(10)H(7)O + O product channels are favored at high temperatures, while the irreversible oxygen atom insertion first leading to the a10 and a10' or b10 and b10' intermediates and then to their various decomposition products is preferable at lower temperatures. Among the decomposition products, indenyl + CO(2) are always most favorable at lower temperatures, but the others, 1,2-C(10)H(6)O(2) (1,2-naphthoquinone) + H (from a10 and b10'), 1-C(9)H(7)O (1-benzopyranyl) + CO (from a10'), and 2-C(10)H(7)O (2-benzopyranyl) + O (from b10 and minor from b10'), may notably contribute or even become major products at higher temperatures.     

Exploring the dynamics of reaction C(3P) + C2H4 with crossed beam/photoionization experiments and quantum chemical calculations

We investigated the title reaction at collision energy 3.5 kcal mol(-1) in a crossed molecular beam apparatus using undulator radiation as an ionization source. Time-of-flight (TOF) spectra of product C(3)H(3) were measured in laboratory angles from 20° to 100° using two photoionization energies 9.5 and 11.6 eV. These two sets of experimental data exhibit almost the same TOF distributions and laboratory angular distributions. From the best simulation, seven angle-specific kinetic-energy distributions and a nearly isotropic angular distribution are derived for product channel C(3)H(3) + H that has an average kinetic-energy release of 15.5 kcal mol(-1), corresponding to an average internal energy of 33.3 kcal mol(-1) in C(3)H(3). Furthermore, TOF spectra of product C(3)H(3) were measured at laboratory angle 52° with ionizing photon energies from 7 to 12 eV. The appearance of TOF spectra remains almost the same, indicating that a species exclusively contributes to product C(3)H(3); the species is identified as H(2)CCCH (propargyl) based on the ionization energy of 8.6 ± 0.2 eV and the maximal kinetic-energy release of 49 kcal mol(-1). Theoretical calculations indicate that the rapid inversion mechanism and rotation in intermediate H(2)CCCH(2) can result in a forward-backward symmetric angular distribution for product C(3)H(3) + H. The present work avoids the interference of reactions of C((1)D) and C(2) radicals with C(2)H(4) and rules out the probability of production of other isomers like c-C(3)H(3) and H(3)CCC proposed in the previous work at least at the investigated collision energy.     

Transition states for the dimerization of 1,3-cyclohexadiene: a DFT, CASPT2, and CBS-QB3 quantum mechanical investigation

Quantum mechanical calculations using restricted and unrestricted B3LYP density functional theory, CASPT2, and CBS-QB3 methods for the dimerization of 1,3-cyclohexadiene (1) reveal several highly competitive concerted and stepwise reaction pathways leading to [4 + 2] and [2 + 2] cycloadducts, as well as a novel [6 + 4] ene product. The transition state for endo-[4 + 2] cycloaddition (endo-2TS, DeltaH(double dagger)(B3LYP(0K)) = 28.7 kcal/mol and DeltaH(double dagger)(CBS-QB3(0K)) = 19.0 kcal/mol) is not bis-pericyclic, leading to nondegenerate primary and secondary orbital interactions. However, the C(s) symmetric second-order saddle point on the B3LYP energy surface is only 0.3 kcal/mol above endo-2TS. The activation enthalpy for the concerted exo-[4 + 2] cycloaddition (exo-2TS, DeltaH(double dagger)(B3LYP(0K)) = 30.1 kcal/mol and DeltaH(double dagger)(CBS-QB3(0K)) = 21.1 kcal/mol) is 1.4 kcal/mol higher than that of the endo transition state. Stepwise pathways involving diallyl radicals are formed via two different C-C forming transition states (rac-5TS and meso-5TS) and are predicted to be competitive with the concerted cycloaddition. Transition states were located for cyclization from intermediate rac-5 leading to the endo-[4 + 2] (endo-2) and exo-[2 + 2] (anti-3) cycloadducts. Only the endo-[2 + 2] (syn-3) transition state was located for cyclization of intermediate meso-5. The novel [6 + 4] "concerted" ene transition state (threo-4TS, DeltaH(double dagger)(UB3LYP(0K)) = 28.3 kcal/mol) is found to be unstable with respect to an unrestricted calculation. This diradicaloid transition state closely resembles the cyclohexadiallyl radical rather than the linked cyclohexadienyl radical. Several [3,3] sigmatropic rearrangement transition states were also located and have activation enthalpies between 27 and 31 kcal/mol.     

Reaction HFCO + 2H2O — Calculated Mechanisms

Three possible reaction mechanisms of methanoyl fluoride with 2H₂O include a concerted and a stepwise hydrolysis of HFCO into HCOOH + HF, and a pure catalytic decomposition of HFCO into HF + CO. Among these, the two H₂O molecules acting as catalyst to decompose HFCO has the lowest calculated barrier, 25.1 kcal/mol with respect to the reactant‐adduct complex, whereas the barriers for the concerted and stepwise hydrolytic reactions in which one H₂O acts as a reactant and the other H₂O as catalyst are similar, 30.8 kcal/mol for concerted and 29.9 kcal/mol for stepwise. The formation of transoid HCOOH in the hydrolysis of HFCO is more favorable than cisoid HCOOH.     

The possibility of the decomposition of 2'-deoxyribose moiety of thymidine induced by the low energy electron attachment

To evaluate the possibility of the decomposition of 2-deoxyribose moiety of thymidine induced by low energy electrons (LEE) attachment, the transition states and the energy barriers of the bond breaking processes of the ribose of the nucleoside have been studied theoretically by applying the density functional theory with the double zeta basis sets (DZP++). The energy barriers for the breakage of the C-C bonds (C(1')-C(2'), C(2')-C(3'), C(3')-C(4'), and C(4')-C(5')) of the ribose group of the radical anion of thymidine are found to be high (ca. 42-57 kcal/mol). The total energies of the C-C bond-broken products are significantly higher than that of the radical anion dT(*-). The decomposition of dT(*-) through the C-C bond rupture is unlikely to take place. The rupture of the C(1')-O(4') bond of dT(*-) needs an activation energy as low as 10.4 kcal/mol. However, the reversed reaction (C(1')-O(4') bond formation) needs the activation energy low as 0.3 kcal/mol. Therefore, the intermediate product LM1(C1')-(O4') is unlikely to be stable and the C(1')-O(4') bond-broken is not favored. The activation energy of the C(4')-O(4') bond rupture process amounts to 20.5 kcal/mol. The total energy of the C(4')-O(4') bond broken product is about 6.5 kcal/mol lower than that of the reactant dT(*-). The subsequent N1-glycosidic bond breaking process is found to have a very low energy barrier. Therefore, the LEE-induced base release through the C(4')-O(4') bond rupture might be a possible pathway.