Development of 500 MHz muon spin resonance spectrometer

The 500 MHz muon resonance was newly developed. The system was constructed with 500MHz resonance cavity, pulsed high power RF-source and the superconducting helmholz coil. This system provide the oppotunity to achieve the diamagnetic muon spectroscopy at 37KG and 500MHz. Also muonic radical resonance and muonium resonance at magnetic field corresponding to the 500MHz resonance frequency. Some preliminary but important result was also reported.     

轴对称高场超导磁体电磁应力有限元分析方法

核磁共振成像和核磁共振谱仪是高场超导磁体的主要应用领域.高场超导磁体通常具有较高的磁场和运行电流,在运行过程中超导线会产生较高的电磁应力,其临界特性将发生退化,影响磁体的稳定性.开展高场超导磁体的电磁应力精确分析显得尤为必要.本文发展了一种快速有效的有限元分析方法,第一步,为整个超导磁体系统建立平均有限元模型,采用传统的电磁-结构耦合方法求解电磁应力,获得最大应力位置;第二步,对最大应力所在的超导线圈建立详细有限元模型,采用单积分-结构分析方法精确求解每一组分中电磁应力.基于该模型研究了500 MHz NMR超导磁体的电磁应力.该分析方法也可以用于超导磁体冷却过程中的热应力分析.为高场超导磁体设计和建造提供有益的理论依据.     

A superconducting solenoid system which cancels fluctuations in the ambient magnetic field

An extra superconducting coil added to a standard, high-field solenoid results in a self-shielding solenoid system which utilizes flux conservation to passively shield an interior volume from changes in the ambient field, such as those from elevators or subways. For this first experimental demonstration, a highly homogeneous 6 T solenoid and an added coil were arranged in one of the geometries predicted to produce effective shielding. The fluctuations in the shielded high-field region are observed to be smaller than the fluctuations in the spatially uniform ambient magnetic field by a large factor of 156, confirming the general shielding principles presented earlier. This shielding is crucial for ongoing antiproton cyclotron resonance experiments and should be useful for nuclear magnetic resonance experiments and ion cyclotron resonance experiments and for other applications where high field and high stability are required simultaneously.     

AC loss in a high-temperature superconducting coil

In a typical superconducting coil made of BSCCO/Ag tape, both amplitude and direction of the magnetic field determine the critical current, resistive voltage and AC loss. The distribution of the magnetic field along and across the superconducting tape in a coil is rather complex. This gives rise to the question: how accurate can one predict the critical current, V–I characteristic and AC loss of the AC coil from results of short sample measurements? To answer this question, we have measured and compared the characteristics of a short sample and a small coil employing 14 m of the same tape at 77 K. The comparison is performed as follows. First, a short sample is characterised with regard to the field dependence of the critical current, V–I characteristic and the AC loss. Second, the distribution of the magnetic field along the tape in a coil is accurately calculated. From the data, the voltage along the tape and the loss of the tape in the coil are found. Finally, the resistive voltage and the AC loss of the complete coil are calculated and compared to measured AC losses in the frequency range of 0 to 160 Hz, typical for power applications.     

A design of novel type superconducting magnet for super—high field functional magnetic resonance imaging by using the harmonic analysis method of magnetic vector potentials

The approach of expanding the magnetic scalar potential in a series of Legendre polynomials is suitable for designing a conventional superconducting magnetic resonance imaging magnet of distributed solenoidal configuration. Whereas the approach of expanding the magnetic vector potential in associated Legendre harmonics is suitable for designing a single-solenoid magnet that has multiple tiers, in which each tier may have multiple layers with different winding lengths. A set of three equations to suppress some of the lowest higher-order harmonics is found. As an example, a 4T single-solenoid magnetic resonance imaging magnet with 4×6 layers of superconducting wires is designed. The degree of homogeneity in the 0.5m diameter sphere volume is better than 5.8 ppm. The same degree of homogeneity is retained after optimal integralization of turns in each correction layer. The ratio B_m/B₀ in the single-solenoid magnet is 30% lower than that in the conventional six-solenoid magnet. This tolerates higher rated superconducting current in the coil. The Lorentz force of the coil in the single-solenoid system is also much lower than in the six-solenoid system. This novel type of magnet possesses significant advantage over conventional magnets, especially when used as a super-high field functional magnetic resonance imaging magnet.     

短腔、自屏蔽磁共振成像超导磁体系统的混合优化设计方法

本文提出一种用于短腔、自屏蔽磁共振成像超导磁体系统的混合优化设计方法,通过结合线性规划和非线性优化算法,设计出的磁体系统具有建造成本低、结构简单、以及线圈中最高磁场、电流安全裕度和电磁应力可控等优点.首先,通过线性规划算法在欲布置线圈空间范围内建立二维连续网格划分,搜索满足磁场约束条件的网格电流分布图;其次,将电流分布图中的非零电流簇离散成螺线管线圈,通过非线性优化算法计算出满足成像区域磁场均匀度要求、5 Gs杂散场限制、线圈中最高磁场限制、电流安全裕度以及线圈间尺寸间隔等约束条件的线圈结构参数.文中给出一个中心磁场为1.5T自屏蔽磁共振成像超导磁体系统的设计案例,在50 cm球形成像区域所产生的磁场峰峰值不均匀度为10 ppm,线圈最大长度为1.32 m.该设计方法可用于对称、非对称螺线管线圈系统以及开放式双平面线圈系统的磁共振成像磁体系统设计.     

Equivalent magnetic dipole method used to design gradient coil for unilateral magnetic resonance imaging

The conventional magnetic resonance imaging(MRI) equipment cannot measure large volume samples nondestructively in the engineering site for its heavy weight and closed structure. In order to realize the mobile MRI, this study focuses on the design of gradient coil of unilateral magnet. The unilateral MRI system is used to image the local area above the magnet. The current density distribution of the gradient coil cannot be used as a series of superconducting nuclear magnetic resonance gradient coils, because the region of interest(ROI) and the wiring area of the unilateral magnet are both cylindrical side arc surfaces. Therefore, the equivalent magnetic dipole method is used to design the gradient coil, and the algorithm is improved for the special case of the wiring area and the ROI, so the X and Y gradient coils are designed.Finally, a flexible printed circuit board(PCB) is used to fabricate the gradient coil, and the magnetic field distribution of the ROI is measured by a Gauss meter, and the measured results match with the simulation results. The gradient linearities of x and y coils are 2.82% and 3.56%, respectively, less than 5% of the commercial gradient coil requirement.     

5T有源屏蔽式超导磁体结构设计

介绍了为兰州Penning离子阱项目专门设计的5T有源屏蔽式超导磁体。 为达到物理设计要求的场均匀度, 超导磁体有3层共计6个线包组成。 同时为了确保线圈绕制的定位精度和在强磁场下的稳定性, 绕制骨架采用三筒体结构, 模拟计算表明线圈的绝缘和固定结构能够达到强磁场下的电气和机械性能要求。 对5T有源屏蔽式超导磁体结构设计材料选择以及线圈的绕制工艺进行了详细的论述。 A 5T actively shielded superconducting magnet was designed for Lanzhou Penning Trap project. In order to achieve homogeneity of physical requirements, superconducting magnet was made up of six coils, which were wound on framework of three layers. Meanwhile, three framework structure can ensure the precision of coil winding and the mechanical stability under intense magnetic field. The results of simulation show that the insulation and fixed structure of the coil can satisfy the electrical and mechanical requirements under intense magnetic field. At last, properties of the used materials and coil fabrication have been presented.     

A novel radio frequency coil for veterinary magnetic resonance imaging system

In this article,a novel designed radio frequency (RF) coil is designed and built for the imaging of puppies in a V-shape permanent magnetic resonance imaging (MRI) system.Two sets of Helmholtz coil pairs with a V-shape structure are used to improve the holding of an animal in the coil.The homogeneity and the sensitivity of the RF field in the coil are analysed by theoretical calculation.The size and the shape of the new coil are optimized and validated by simulation through using the finite element method (FEM).Good magnetic resonance (MR) images are achieved on a shepherd dog.     

高分辨超导NMR谱仪的匀场

本文详细叙述了超导磁体的磁场分布和匀场线圈的设计。并对匀场电源、匀场线圈的精度和稳定性等要求作了估算。     

Levitating states of superconducting rings in the field of a fixed ring with constant current

We consider the possibility of designing a plasma trap with a magnetic system formed by super-conducting rings and coils levitating in the field of a fixed coaxial coil carrying constant current. An analytic dependence of the potential energy of such a system with one or two levitating superconducting rings having trapped preset magnetic fluxes on their coordinates in the uniform gravitational field is obtained in the thin ring approximation. Calculations performed in the Mathcad system show that equilibrium states of such a system exist for certain values of parameters. Levitating states of a single superconducting ring and two superconducting rings in the field of the coil with constant current are observed experimentally in positions corresponding to calculated values.     

Quality of the simulation of torus conditions with different three coil arrangements

The displacement and stress distributions in toroidally arranged circular superconducting coils producing the toroidal field for fusion experiments are computed by a finite element method. The results are compared with the displacement and stress distributions in one superconducting coil which forms part of different arrangements simulating torus conditions. Four arrangements with three coils are discussed; three of them consist of one superconducting coil with an inner coil winding diameter of 0.94 m and a maximum stored magnetic energy of 2.1 MJ, and two copper coils which were designed for experimental tests. The fourth 3-coil arrangement consists of three identical superconducting coils forming a sector of the torus.     

14T MRI大口径全身自屏蔽超导磁体的一种优化设计方法

磁共振成像(MRI)的磁体设计首先是确保中心成像区的场值和均匀性, 二是尽可能减少场值耗散的距离即漏磁5Gs 线. 基于此本文提出了一种线性与非线性规划联合优化的方法. 首先将导体作为基本单元, 在预布置线圈的空间范围内构建二维连续导体网格. 通过线性规划搜索满足磁场约束条件的网格电流分布图. 再将存在电流的网格离散为一个个矩形线圈区域, 在保证场值均匀性、 杂散场5 Gs 线范围以及线圈位置间隔、 导体超导线安全裕度的前提下利用非线性规划, 具体确定各个线圈的轴向和径向位置、 线圈内导体层数和各层匝数以及通电流大小等. 采用这种联合优化方法, 不仅节省优化时间, 还可以自行设计线圈形状有利于工程实现. 文中由此方法给出了14 T MRI 磁体的一种设计方案, 依靠4 组线圈使得45 cm 中心球形成像内不均匀度降低到5 ppm, 而高场耗散的5 Gs 线通过磁体自屏蔽减小到15 m 以内. 满足了设计的要求.     

Induced current of high temperature superconducting loops by combination of exciting coil and thermal switch

With its commercialization, the second-generation (2G) high temperature superconducting (HTS) RE—Ba—Cu—O (REBCO, RE is rare earth) tape is extensively applied to the superconducting magnets in the high magnetic fields. However, unlike low temperature superconducting (LTS) magnets, the HTS magnet cannot operate in the persistent current mode (PCM) due to the immature superconducting soldering technique. In this paper, an exciting method for two HTS sub-loops, so-called charging and load loops, is proposed by flux pump consisting of exciting coil and controllable thermal switch. Two HTS sub-loops are made of an REBCO tape with two slits. An exciting coil with iron core is located in one sub-loop and is supplied with a triangular waveform current so that magnetic field is generated in another sub-loop. The influence of magnetic flux on induced current in load loop is presented and verified in experiment at 77 K. The relationship between the induced magnetic flux density and the current on the sub-loops having been calibrated, magnetic flux density, and induced current are obtained. The results show that the HTS sub-loops can be excited by a coil with thermal switch and the induced current increases with magnetic flux of exciting coil increasing, which is promising for persistent current operation mode of HTS magnets.     

一种铁基超导带材交流损耗的测量

近年来铁基超导材料的发现掀起了又一轮新型超导材料研究的热潮,各种配方的铁基超导材料不断被制备出来,转变温度也不断提高,中国科学家在该领域取得了十分突出的成果,制备出了多种铁基超导材料,但对其交流损耗特性研究鲜有报道,而实际应用中交流损耗的特性又十分重要,因此搭建了一套采用探测线圈法的交流损耗测量平台,测试了一种中国科学院电工研究所采用PIT工艺制作的单芯铁基超导带材的交流损耗。该文介绍了采用探测线圈法测量超导材料交流损耗的一种测量平台的搭建与标定,以及采用标定过的测量平台在液氦温度下测量的一种采用PIT工艺制作的单芯铁基超导带材的交流损耗;并与计算得到的铁基带材超导芯的磁滞损耗和包套的涡流损耗进行了比较分析,得出了其交流损耗与背景磁场频率成正比,其涡流损耗可以忽略的结论。     

Magnetic field induced incommensurate resonance in cuprate superconductors

The influence of a uniform external magnetic field on the dynamical spin response of cuprate superconductors in the superconducting state is studied based on the kinetic energy driven superconducting mechanism. It is shown that the magnetic scattering around low and intermediate energies is dramatically changed with a modest external magnetic field. With increasing the external magnetic field, although the incommensurate magnetic scattering from both low and high energies is rather robust, the commensurate magnetic resonance scattering peak is broadened. The part of the spin excitation dispersion seems to be an hourglass-like dispersion, which breaks down at the heavily low energy regime. The theory also predicts that the commensurate resonance scattering at zero external magnetic field is induced into the incommensurate resonance scattering by applying an external magnetic field large enough.     

超导开关研究和应用综述

超导开关是实现超导磁体闭环运行的关键部件,也称为持续电流开关(PCS),使超导磁体具有极高的磁场稳定度,广泛应用于核磁共振成像(MRI)、核磁共振谱仪(NMR)、磁浮列车、超导储能系统等技术领域. 文中介绍了超导开关的工作原理和结构组成,综述了用于超导磁体的三类主要超导开关的研究发展现状,比较分析了各自的特点和优势,为...     

Magnetic resonance imaging with stepped B(0) fields

This paper introduces the concept of imaging with stepped magnetic fields within the main B(0) field. The resonance frequency within each step is separated from the next by an amount greater than the imaging bandwidth. Each step thus gives rise to a separate imaging region enabling simultaneous imaging over multiple slices without aliasing. The auxiliary magnetic field regions are produced by coil inserts. The principle is illustrated using simple coil designs which introduce up to two steps into the main B(0) field. Phantoms placed in each uniform region were successfully imaged simultaneously with no aliasing.     

Unilateral MRI using a rastered projection

Unilateral magnetic resonance techniques, where magnet and radio frequency (RF) coil are placed on one side of the sample, can provide valuable information about a sample which otherwise cannot be accommodated in conventional high spectral resolution magnetic resonance systems. A unilateral magnetic resonance imaging approach utilizing the stray field from a disc magnet and a butterfly geometry RF coil is described. The coil excites spins in a volume centered around an arc through the sample. Translating the RF coil relative to the magnet and recording the signal at each translational location creates a projection of the signal in a tomographic slice through the sample. Rotating the RF coil relative to the sample and repeating the translation creates projections through the sample at different angles. Backprojecting this information yields an image. A proof of concept device operating on this principle at 12.4 MHz was constructed and characterized. Projections through three phantoms are presented with a 1.2-4 cm field of view, thickness of 102 microm, and at a distance of 3mm from the RF coil and 14 mm from the magnet. The edge spread function (ESF) was measured resulting in a 4mm full width at half maximum (FWHM) line spread function (LSF) estimation using a Gaussian model. An example of one reconstructed image is presented.     

基于磁通门和时域数字鉴频的磁场锁定系统

永磁型磁共振仪器的磁体易受温度和其他环境磁场干扰,造成主磁场波动,进而影响仪器测量的重复性和准确性.本文讨论了两种解决磁场波动的锁定方法：一方面,通过磁通门传感器对环境波动引起的瞬态磁场进行高灵敏探测,然后采用现场可编程门阵列进行实时处理并计算磁场补偿量;另一方面,针对环境温度变化引起的缓慢磁场偏移,则采用时域数字鉴频锁场方法,在对锁样品进行射频激发后,将磁共振信号通过混频变换到较低的频率范围,再转换为方波,然后直接送入现场可编程门阵列进行周期测量,并计算磁场补偿量.将两种方法获得的磁场补偿量叠加后,再转换为电流信号驱动安装在磁体上的B₀补偿线圈,并研制了一套磁场锁定系统,以实现对磁场的锁定. 在0.5 T食品快检磁共振分析仪上进行测试验证,结果显示当受到瞬态干扰时,可将磁场稳定在±4 Hz（对应磁场为±0.093 9 μT）范围内,同时也可以精准测量温度造成的磁场偏移,该结果验证了本文磁场锁定方法的可行性.